Besides the minor relocations and missing "creature comforts", I note the large ventilation area around the muffler on the Pulsar versus the small area on the Genmax. I also noted the Pulsar has a oil drain extension hose to keep mess to a minimum; the Genmax has the regular drain bolt. Another difference is that the Genmax costs $379 MORE than the Pulsar according to Amazon.
Thanks for posting this! My conclusion is they are the same unit, built by the same factory, and the main differences are the warranty on the Pulsar and the battery trickle charge on the Genmax.
Both made by Chonddinking Corp in China a producer of quality Chinese products. Here in Canada sold as TMG Industrial. Bought one and works superbly for home backup on cheap NG
I have two Pulsar 10500 tri fuel units with parallel kit. I can already run the whole house with one unit and one A/C but with them both connected together, I can run both A/C units. 4 ton and 3.5ton.
It looks like the Pulsar was about 2-3 db quieter overall. I was guessing it would be the opposite, as the exhaust on the Genmax looks much more "engineered", whereas the Pulsar looks to have a basic automotive muffler installed, and looks much cheaper. The Pulsar's exhaust sounded a little less-refined and raspy. It seems crazy to have 2 "identical" units from the same factory, coming with a completely different exhaust system. Both units seem to be listed right around the same retail price, too. The Pulsar doesn't have the LED light or the battery charger port, but the 3 year warranty is compelling for sure. It would be interesting to to a db test under 50% and 100% (or close to it) loads, to see if the Pulsar remains 2-3 db quieter than the Genmax. That might be the deciding factor.
I also thought the Pulsar seemed quieter but that the Genmax had a bit of a high pitched whine in its exhaust sound. The muffler on the Genmax seemed quite a bit beefier, being made of cast iron which I would have guessed made it more subdued. The one year warranty on the Genmax makes it seem "disposable". One year certainly makes it appear Genmax doesnt stand by its product. Online I found a link that showed the 3 year warranty on the Pulsar could be extended an ADDITIONAL 2 years just by registering- if getting real service is even possible without a large service network.
@@jackjacks5480 I do not know, they are easy to identify, there is the thumb screw for the "filter" screen and the low oil alert uses a pressure switch similar to an automobile.
Great video once again Gavin. I need a little large inverter. Two questions: 1) noticed DuroMax released their inverter XP16000iHT tri fuel. Any chance of doing a review on this unit? and 2) you mentioned that GenMax would releasing their GM 17000 trifuel Inverter. Any line of site on the timing for this unit?
I am hooking up to my natural gas from my house. What size pressure regulator do I need. Running straight it will not start. With a regulator from my heater it will work. Just wanted to make sure I had proper flow when called for Max RPMs. Thank you
When using the Genmax along with a EG4 inverter would I need to use any specific type of Chargeverter or anything like that while using the generator to charge my system?
Hey I've been watching your videos you are very knowledgeable and I appreciate them. I just purchased a poxurio generator that gen Max makes so I did the break-in procedure. But every now and then when I start it it has a misfire or backfire but then it runs fine it only happens when I started it occasionally is that normal or should I send it back and get another one. What do you think I should do. I have searched UA-cam for videos that's only a couple of videos on it maybe you can do one on it I purchase the 6000 watt.
Has anyone who owns either a Pulsar or Genmax generator like this had a MAJOR warranty service issue, and HOW did that turn out? I am really curious as to how legitimate the warranty on these generators REALLY is. People who spend a ton of money on a Honda know that they are getting a reliable machine that can be repaired all over the USA but these newer companies like Genmax and Pulsar with their feature packed units dont seem to have much presence in the USA at all. On Amazon the Pulsar is currently selling for $2500, compared to the Genmax at $2900.
I totally agree. Buying either, or in my case the identical unit sold in Canada (TMG Industrial 10500), is a bit of a crap shoot. I get a one year warranty but going back to the seller is not likely to get me parts. All three of these are made by Dinking Corp in China (by all looks, a quality product by a quality company), but even quality equipment can crap out. I bought mine to use natural gas during an extended outage, and today reluctantly sold my Honda EU6500 for top dollar, wondering all the while if I did the right thing while watching it go down the street in the back of the new owners truck. Owning eight generators, I have a decent feel for them, but still can only hope that when or if I need service, I can get parts. My four Champions I don't worry about as that company has probably the best service network available. And if push comes to shove, I'm sure I could order parts from Dinking Corp who give a one year warranty on all their products no matter who's name brand is on it. But with this unproven machine.....I just don't know. But I took the chance.....
@@GeneratorReviewsIs that really all? I’ve been trying to research this exact thing and I thought a ~7kw natural gas output generator like this would be pushing 100k BTUs.
What about reliability for each? That is most important! Cosmetics really means little when we need emergency power. Run them for the break-in period and test the oil. That would be a comparison! If you want us to tell you which one we like best, we need a LOT more information. Otherwise, I prefer blue!🤷♂️
Surprised they are the same weight with one have cast iron exhaust and the other plastic. Also surprised Pulsar with plastic exhaust is actually slightly quieter. Not sure why both are 60lbs more than the Westinghouse 11k inverter and 40lbs more than the Duromax 11k.
@@TheSnakeman3 -- You generally want a floating neutral if you intend to feed your home's breaker panel during a power outages because your home's electrical service is already bonded and you only want a single bond point where the neutral and ground are joined together. You typically want a bonded neutral generator for a construction site generator or food trailer. I think it's easier to bond a floating neutral generator then un-bond a bonded generator.
Besides the minor relocations and missing "creature comforts", I note the large ventilation area around the muffler on the Pulsar versus the small area on the Genmax.
I also noted the Pulsar has a oil drain extension hose to keep mess to a minimum; the Genmax has the regular drain bolt.
Another difference is that the Genmax costs $379 MORE than the Pulsar according to Amazon.
Thanks for posting this! My conclusion is they are the same unit, built by the same factory, and the main differences are the warranty on the Pulsar and the battery trickle charge on the Genmax.
Both made by Chonddinking Corp in China a producer of quality Chinese products. Here in Canada sold as TMG Industrial. Bought one and works superbly for home backup on cheap NG
I have a pulsar 9500 dual fuel and very happy with it!
I have two Pulsar 10500 tri fuel units with parallel kit. I can already run the whole house with one unit and one A/C but with them both connected together, I can run both A/C units. 4 ton and 3.5ton.
More differences than expected. Genmax seems more appealing to me. The higher exhaust should be safer for running it around grass and plants. 👍👍
That’s a great point about the grass👍🏾
Genmax 11000iETC Tri-Fuel went on sale at Sam Club for $1,900.00 this past black Friday. Might come back again around Christmas.
Thank you for this detailed comparison video. There are features that I like on both units. Especially, in an emergency, I would buy either one.
One is orange and the other is blue. Your welcome.
I was thinking that one is blue and the other is orange.
@@ChatGPT1111 Clearly you can see that one is orange and the other is blue. 😀
You are the man 😂
$200.
Awesome review! Thank you for taking the time and doing so well!
Thanks 🙏🏾
I have the Generac Ultra Source 15KW and 17.5 KW, plus two Duromax XP9000iH and my newest Kubota GL14000. It's a sweetheart.
The Kubota is the REAL deal.
It looks like the Pulsar was about 2-3 db quieter overall. I was guessing it would be the opposite, as the exhaust on the Genmax looks much more "engineered", whereas the Pulsar looks to have a basic automotive muffler installed, and looks much cheaper. The Pulsar's exhaust sounded a little less-refined and raspy. It seems crazy to have 2 "identical" units from the same factory, coming with a completely different exhaust system. Both units seem to be listed right around the same retail price, too. The Pulsar doesn't have the LED light or the battery charger port, but the 3 year warranty is compelling for sure. It would be interesting to to a db test under 50% and 100% (or close to it) loads, to see if the Pulsar remains 2-3 db quieter than the Genmax. That might be the deciding factor.
Well said sir 👍🏾
I also thought the Pulsar seemed quieter but that the Genmax had a bit of a high pitched whine in its exhaust sound. The muffler on the Genmax seemed quite a bit beefier, being made of cast iron which I would have guessed made it more subdued.
The one year warranty on the Genmax makes it seem "disposable". One year certainly makes it appear Genmax doesnt stand by its product. Online I found a link that showed the 3 year warranty on the Pulsar could be extended an ADDITIONAL 2 years just by registering- if getting real service is even possible without a large service network.
Thanks for the comparison review. How do you trigger charge the Pulsar?
You can plug a battery tender and some Schumacher chargers into the SAE pigtail on the battery. Some models require a polarity reversing SAE adapter.
They both have pressurized lubrication. I am a huge fan of this 459 engine ( I have the generac GP9200E )
Where did you get that propane tank ??
I got it on Amazon
Same 459 as the Harbor freight predator 459cc?
@@jackjacks5480
I do not know, they are easy to identify, there is the thumb screw for the "filter" screen and the low oil alert uses a pressure switch similar to an automobile.
Great video once again Gavin. I need a little large inverter. Two questions: 1) noticed DuroMax released their inverter XP16000iHT tri fuel. Any chance of doing a review on this unit? and 2) you mentioned that GenMax would releasing their GM 17000 trifuel Inverter. Any line of site on the timing for this unit?
I will update you when I post the Duromax Xp16000iht video.
Both units say on the panel "system bonded to frame". Is the genmax a floating neutral or not?
The GenMax is a floating neutral
Thanks for the comparison Gavin. What are your prices out the door on these two units?
Where are you located?
PA, just north of Baltimore, MD
I am hooking up to my natural gas from my house. What size pressure regulator do I need. Running straight it will not start. With a regulator from my heater it will work. Just wanted to make sure I had proper flow when called for Max RPMs. Thank you
Pulsar’s Bonded Neutral? What would I need to do to connect this to my home? Thanks.
I will make a video showing how to convert to floating neutral
Bonded vs floating neutral ??
Will explain in detail on future video
When using the Genmax along with a EG4 inverter would I need to use any specific type of Chargeverter or anything like that while using the generator to charge my system?
No you don’t have to use the chargeverter
Heard westinghouse is very good… had any experience w them?
I will compare to Westinghouse next
Westinghouse is a has-been brand, like Bell and Howell
It's just licensed @@ChatGPT1111
How about show the difference between covered and uncovered panels .
can any of these use a two wire start so that my solark battery inverter can start it ?
Only the 17,000 has the two wire start?
Did you get the gen max 10500 california yet?
Yes 👍🏾
Hey I've been watching your videos you are very knowledgeable and I appreciate them. I just purchased a poxurio generator that gen Max makes so I did the break-in procedure. But every now and then when I start it it has a misfire or backfire but then it runs fine it only happens when I started it occasionally is that normal or should I send it back and get another one. What do you think I should do. I have searched UA-cam for videos that's only a couple of videos on it maybe you can do one on it I purchase the 6000 watt.
How many hours does it have on it?
@@GeneratorReviewsI have about two and a half hours on it
Thank you
You’re welcome! thanks for watching
Please review the he gen max 4600 dual fuel.. I have one but no one has done a decent review of one at all. Thank you
ua-cam.com/video/nKwDcIhCsas/v-deo.htmlsi=8sc4wt2rpsky743n
Can you do a reveiew on the generac xt 8500 efi generator please?
Has anyone who owns either a Pulsar or Genmax generator like this had a MAJOR warranty service issue, and HOW did that turn out?
I am really curious as to how legitimate the warranty on these generators REALLY is. People who spend a ton of money on a Honda know that they are getting a reliable machine that can be repaired all over the USA but these newer companies like Genmax and Pulsar with their feature packed units dont seem to have much presence in the USA at all.
On Amazon the Pulsar is currently selling for $2500, compared to the Genmax at $2900.
My website the Pulsar is 2499 and the Genmax is 2549
generator-superstore.com/product/genmax-gm10500ietc-tri-fuel-portable-inverter-generator/
I totally agree. Buying either, or in my case the identical unit sold in Canada (TMG Industrial 10500), is a bit of a crap shoot. I get a one year warranty but going back to the seller is not likely to get me parts. All three of these are made by Dinking Corp in China (by all looks, a quality product by a quality company), but even quality equipment can crap out. I bought mine to use natural gas during an extended outage, and today reluctantly sold my Honda EU6500 for top dollar, wondering all the while if I did the right thing while watching it go down the street in the back of the new owners truck.
Owning eight generators, I have a decent feel for them, but still can only hope that when or if I need service, I can get parts. My four Champions I don't worry about as that company has probably the best service network available. And if push comes to shove, I'm sure I could order parts from Dinking Corp who give a one year warranty on all their products no matter who's name brand is on it.
But with this unproven machine.....I just don't know. But I took the chance.....
What’s the price differences?
Both priced around $ 2500 usd
Check the link in the description
How many btu’s of natural gas do I need to run these generators? Thanks.
With a half inch pipe natural gas line the generator needs 31,000 BTU
@@GeneratorReviewsIs that really all? I’ve been trying to research this exact thing and I thought a ~7kw natural gas output generator like this would be pushing 100k BTUs.
Can you review DK 9200W Generator, Tri-fuel.thanks
What about reliability for each? That is most important!
Cosmetics really means little when we need emergency power.
Run them for the break-in period and test the oil. That would be a comparison!
If you want us to tell you which one we like best, we need a LOT more information. Otherwise, I prefer blue!🤷♂️
They’re made in the same factory guys
Very informative video!
Surprised they are the same weight with one have cast iron exhaust and the other plastic. Also surprised Pulsar with plastic exhaust is actually slightly quieter. Not sure why both are 60lbs more than the Westinghouse 11k inverter and 40lbs more than the Duromax 11k.
Made in the same factory
Both made by Genmax made in the same factory. I’m just showing the differences.
Floating neutral makes it nice to connect to your house.
@@sh839cwhy does that make a difference? I don’t know this answer but would like to know. Thanks.
@@TheSnakeman3 -- You generally want a floating neutral if you intend to feed your home's breaker panel during a power outages because your home's electrical service is already bonded and you only want a single bond point where the neutral and ground are joined together. You typically want a bonded neutral generator for a construction site generator or food trailer. I think it's easier to bond a floating neutral generator then un-bond a bonded generator.
@@TheSnakeman3 A video explanation. ua-cam.com/video/IXTclhgmsY0/v-deo.html
Pulsar is better. A bit quieter and longer warranty.
They must be made by the same company. I wonder who decided the differences.
The people who purchased them.
Genmax has a battery charger; Pulsar doesn't appear to have one
Warranty
they the same, same factory, same chinesium... smFh
🤦🏽♂️