What's In The Box?! HYDRO STRIKE PULSAR PRO Gel Blaster Unboxing and Review - Compare to Splatrball
Вставка
- Опубліковано 12 лип 2024
- I unbox and review the Hydro Strike Pulsar Pro, the new gel blaster from the brand behind the DART ZONE Nerf-style foam blasters.
▼ WHERE TO BUY - www.amazon.com/shop/engineerable
▶ Hydro Strike Pulsar Pro - amzn.to/3xf1vkq or from Walmart.com www.walmart.com/ip/Hydro-Stri...
▶ SplatRBall SRB400 Kit (Orange, Shown in this Video): amzn.to/3Ig1BuO
▶ SplatRBall SRB400-SUB Kit (Blue, Without stock): amzn.to/3wa5G0Y
▶ SplatRBall SRB1200 Kit (I haven't tested this one yet): amzn.to/3ibpEAl
▶ SplatRball 20K Orange Ammo - amzn.to/3KIZrFy
▶ Revision Locust Goggles - amzn.to/3B25bae - www.bradleyssurplus.com/colle...
▶ Lipo Battery Bag 240x190x60mm Size - amzn.to/3NzCZju
▶ SentrySafe Fire and Water Resistant Bag for Documents, 5" x 11" x 15" - amzn.to/38X6BbX
▼ Pulsar Pro Video Chapters:
00:00 Introduction
00:31 What's In The BOX?!
01:00 Hydro Strike Pulsar Pro and Accessories laid out
01:10 Pulsar Pro body
01:26 Attaching gel ball magazine
01:42 Attaching the shoulder stock
02:06 Sights and tactical picatinny rail
02:57 Battery 7.4V with XT30 connector
03:55 Firing Modes: Safety, Single Shot, Full Auto
04:17 Full Metal Aluminum Barrel + Hop up?
04:42 Airsoft V3 style gearbox
04:52 Motor pinion to bevel gear adjustment screw
06:15 Gearbox spring access inside rear stock mount
06:52 Final thoughts on the Hydro Strike Pulsar Pro Blaster
07:02 Next Pulsar Pro Videos: FPS test, RPS test, and durability testing
CAUTION! - Hydro Strike Pulsar Pro and other Gel Blasters should be treated as weapons and should not be used in public or areas where someone who is not part of the game can be hit. The police will charge you with assault with a weapon. There have been multiple instances in the news of people (mainly teens) being charged with crimes for shooting unsuspecting people in public. The gel ball projectiles can cause permanent injury to unprotected eyes and face.
▼ VISIT OUR WEBSITE
▶ Products we make: soulbuilt.us
▶▶ Amazon Store: www.amazon.com/stores/SoulBuilt
▶ Engineering: www.engineerable.com
▼ FOLLOW US ON:
▶ Instagram: / soul.built
▶ Facebook: / soulbuilt.us
The products shown here were purchased by me with the intent to use them. I did not receive any free items, and I am not being paid or compensated for this review. The video, description, and comments may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, crafting, and DIY. - Авто та транспорт
Love your vids, keep it up.
Can’t wait for the Starfire XL.
I haven’t unboxed that one yet!
Quick question, If I leave the battery inside the blaster without using it for like weeks to months. Will the wire, gearbox, or the battery itself mess up?
Waiting for you to get a starfire or surge xl to take apart before I take a peak in mine but it does sound like it's actually got metal gears
My friend bought one, and its the most consistent of all of our blasters, the rest of us have SRB400’s lol
I’m so glad you are making videos again it always makes my day better
Thanks! Glad to hear that!
Thanks you so much engineerab
E
We have 5 Pulsar Pros in my house 🤣👍 among a vast collection of gel blasters between my 2 sons and I
Good question,what is the best blaster to get on this list
Hydro strike(one in the video)
SplatRball srb400
Zshot hpg-700
I hate to ask but is there a tracer for this gun like anywhere online I wanna do that uv light thing in the magazine but I wanna see if there’s a tracer first
I HAVE THE PULSAR AND THE SIRUS AND I WANNA TUNE AND UPGRADE BOTH….. WHICH SPRINGS AND GEARS SHOULD I GET
Is this better then srb400 and is this gun durable and will last a while getting one for my bday in 2 days and also I don’t have to do any upgrades unless I wanted more voltage if a battery just wanna make sure this gel blaster is good stock and will last a while 😂
They all have play in stocks and stuff. That doesn't mean it's loose, if it's too tight plastic starts to crack. If you pay attention, the play is VERY consistent. When you buy another pulsar you will notice it ALL feels EXACTLY the same as each other. Because the play is intentional.
Splatrball SRB400 and 1200 have 0 play in the stock connection. In fact it's so tight sometimes you have to hit it to slide it out. GB SURGE XL is tight, UNLOCX is tight. So in comparison the Hydrostrike is very loose and could be designed better. Agree that plastic will start to crack or yield if under constant stress, but there are ways to make it better than this.
Helpful!
Waiting on how to fix or mod this one. Had it for 8months and now got the whining noise. Looking for the next pulsar pro video to drop
Would love to see mod videos on this one! I love this Blaster bought it on a whim last month but the performance surprised me
Working on mod videos. Stay tuned!
Are you going to do it
So… an Splat R Ball is like an AK, while a Pulsar is like an Aarmalite.
Yeah splatr with no stock looks like a Draco
Nah splatrball is like a g36c
oh
@@ChaoticMarioBros_YTWRDDD
The pulsar bro is based off the Assault Rifle pistol with attachments on it
Awesome!
I think he loves the spiderball😂😂just review that
Once I seen that, it had a switch on it for automatic purposes, I was sold
Please make a video on putting metal gears in this gun like how you did with the splatter ball SRb 400 I want to custom make a gel blaster and I already have this one but if you don’t feel like making the video I can just get the SRB
Mods will happen. Don't do it with the SRB. Not worth it because of their non standard gearbox dimensions.
@@engineerable thank you
Can you use a splatter mag for the hydro strike gun ???
No they are not compatible
Got this gel blaster and its pretty good. The mag is now a drop out mag they must be updating their gel blasters
Drop out mag?
@@engineerable yea when i press the mag release the mag drops out
@@ChaoticMarioBros_YT I see, could be manufacturing tolerances why mine didn't do that and yours does, or they did make an improvement.
hey my pulsar pro isnt shooting even if i put ammo in it what can i do to fix it
Charge your battery
And for the hop up you don’t have to cut anything just get a longer barel
Longer barrel may affect the barrel to piston volume ratio
@@engineerable damn what would you recommend for me to do if I wanna upgrade everything change the gearbox ???
@@ruben1338 I haven't done it yet, but the APS silver edge V3 is a good candidate for gearbox swap
Can you give me the specs of the. Charger? I lost mine, I tried charging it with another one but it won't charge
It's the same generic 7.4V 2s LiPo battery charger that all these gel blasters use.
I have a question, how do you know when the battery is done charging?
Watch this video about gel blaster battery charger ua-cam.com/video/K9CX8ytKr10/v-deo.html
@@engineerable thanks
@@engineerable pls do a mod and a fast battery and a tracer unit or a hop up pls🙏
Dose the splatter r battery work on the hydro gun??
No, the Hydro strike and Gel Zone blasters use a better battery connector
which would you recomend this or the splatrball sbr400
This is a better blaster than srb400.
@@engineerable how about in terms of being able to upgrade or mod it I don't see many videos about this blaster at all
@@jsanchez9084 I haven't dug into modding this one yet. The Splatrball gearbox is horrible to mod though. I believe this one should be better, but haven't had time to do it yet.
It's around 260 with right gels. I've hit 302 with it.
which brand do you use?
with that rail can i put nerf sights on it?
If NERF rails fit on Picatinny style tactical rails, then probably. I don't have any to try.
Ay bro I have this and so do my cousins I’m tryna upgrade everything including the gearbox but don’t know how could you make a video on it (side note this gun stock is compatible with nerf worker attachments I got the pdw one looks awesome )
Pdw stock***
Nice, you got a link for that stock?
@@engineerable mb Ian see this I got you
I rlly don’t have a link but look up for “worker mod stock , WORKER Extendable Simple Retractable Shoulder Stock for Nerf N-Strike Elite (Black)” hope you still interested
Like your videos, Need to do a mod video and tracer
Yes, hopefully this gearbox is more standard than Splatrball, so it will be easier to replace the gears.
@@engineerable okay and I have a extra one but I don’t know how to put the gears back together
@@koolaktiv692 I don't have a Pulsar video yet, but the Splatrball gearbox is similar. Maybe this video will help you ua-cam.com/video/xXFF0MpLKlw/v-deo.html
Mais alguns BR que sonha em comprar ?
i cant find the usb charger online I lost mine and trying to find buy new one
Check here for links to chargers they work www.engineerable.com/single-post/what-do-the-gel-blaster-battery-charger-lights-mean-red-vs-green-and-flashing-vs-steady
Pulsar pro or unlocx, can’t really decide and I want power, thanks
Both have same power. Pulsar Pro or Gel Zone Kratos (same internals). UNLOCX is great, but their battery charging system is not good.
@@engineerable appreciate it
My little cousin got one of these for Christmas and noticed that it wouldn’t fire any gellets anymore, do you think it’s the battery? Also love the video!!!
Is it making the shooting sound like normal?
Can you put metal gears in it
I will be making a video of metal gear conversion. Stay tuned.
Do the mags work on splat r ball
No
Aw man
are you going to take this one apart as well?
Yes, already have. Editing the video. Stay tuned!
Can you put a drum magazine on it
There's no drum mag available. I'm working on a 3D printed add on to the mag to increase capacity. Will share the files for subs to print.
Can srb mag fit
What is better splat or this
@@SeanHardy-lj4yj this
@@engineerable ohh i should had bought it LOl
By the way can u show a video when u put metal gears in the SplatRBall srb 400
@@SeanHardy-lj4yj Splatrball metal gears video ua-cam.com/video/3o4r5-Xr93U/v-deo.html
Im so mad i seen this in wallmart and When i try to buy it it was 44 i had 42😭😭😭
how much money you buy it
$70
Can I have that one
No
Is there anyway to remove that flash hider on the end? I’m thinking about getting one of these but wanted to add a rgb tracer on the end
Yes, you gotta take it apart to remove that. End mount tracers are usually designed to screw into an outer barrel, which non of these budget blasters have. There maybe some adapter that attaches to the barrel. Otherwise, you need a replica blaster.
@@engineerable I wonder if it’s possible to just stick a tracer on the end of that flash hider. maybe somehow use some strong tape to hold it to it? Assuming the holes meet up ok
@@engineerable are you familiar with the SRB1200? I seen it has an exposed barrel inside it’s flash hider, I can’t find any information if it shoots faster than this pulsar pro or not
Flash hider just pops right off and you can 3D print an adapter piece to fit or order those metal threaded outer barrel sets (4 piece set different lengths) I use my RGB tracer unit on my M4’s so I’ve never wanted to mount it on my Hydro strike 😎👍
No splatter ball
😭😭😭😭😭😔😔😩😩😩😩😩😩