Koi fish cutting board / butcher block. Zieba board #3. Cnc inlay. Wood inlay 4k video.
Вставка
- Опубліковано 15 бер 2020
- The board size is 18*12*2 inch.
Michael Zieba:
www.ziebaknives.com/
How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - Навчання та стиль
''Beautiful'' no other word for that. Too beautiful to use, but you'd never get tired of looking at it and having it as a piece of art.
Thank you very much!
There's a better word than 'beautiful'. How about 'ridiculous'! No one else would even think of attempting this. This is the difference between a woodworker and a master.
Beautiful work! The ART is in having the vision to use technology in such a creative way. Thank you!
"The Art is in having the vision to use technology in such a creative way." Well said, as a designer who uses a C02 laser to cut wood is by no means taking an easy way out. Its the creations that are thought of with the use of our inventions. We have the tech and if we will evolve in our craft we must use tools. Heck if all is said to be true don't forget we supposedly used advanced alien tech to build some of our most beloved historical sites
Masterpiece! I would never put a knife on it though, rather to have it as a beautiful display. How ever, this gave me an idea how I want my front door!
This is one of the most beautiful pieces i have ever seen! Well done! Thanks for sharing.
This is one of the most beautiful and creative cutting boards I have ever seen.
That inlay process was incredible.
I’ve only just found this channel these boards are amazing
Would be impossible to use as a cutting board...just absolutely too beautiful!!! I would gift it to someone to hang on their wall and I would get one for myself too. Stunning 😍🥰
I never knew it was one piece as an inlay. It is beautiful as ever so clever.
Such fantastic workmanship!! It’s absolutely beautiful. It’s too gorgeous certainly to chop fish on!! Work of art!! 🙏🙏🙏
My goodness this is BEAUTIFUL!!!!
Very clever process and beautiful end result! Thank you for sharing this👍
This is art! Wow! I really wanna use that cutting board in my life
Отличная работа!!! Интересный и с моей точки зрения сложный перенос ресунка.Супер!!! 👍👍👍
DUDE .. that is way to beautiful to use as a chopping/cutting board .. looks awesome!!
I've always been a huge fan of woodworking, ever since I was a teenager. Well, I'm MANY, MANY years past that, but this machine makes the most amazing projects I've ever seen. I'm too scared to even LOOK at the price of one of them, since I know it will be well outside of my range of affordability, but admiring the work it produces is enough for me. Can't wait to see the other projects. The quality of craftsmanship it produces is unparalleled to anything I've ever seen before. Just incredible!
one word: GORGEOUS.
i'm in love with the work of art.. KUDOS.
Absolutely beautiful. Wow!
A work of art. Beautiful!
Thank you!
That is truly a piece of art!
Hahaha cutting board, man I would hang this up in ky fish tank room as art, amazing build, skills, and ingenuity. Two thumbs up.
Amazing work! Pure art. I have seen similar work before in Beijing. Except the inlay was done in silver. Very nice ...
That is just beautiful work! A real craftman at work!
OMG Wow Wow Wow that is amazingly beautiful inlay thats something to hang up for display
wow that filling wood proces was amazing 👍
Amazingly gorgeous!
Who could ever use it as a cutting board? Amazing piece of art work.
I am so impressed by these works that I have decided to make one as a gift for a family member. No, I will not be copying the design, but I will be using the technique. I have done similar inlays but not with end grain and not using a tapered ball nose cutter. I am a hobbyist so I will not be selling these either.
Really outstanding work! Thank you for the inspiration.
I forgot to mention, the board I make will be used. End grain cutting boards last almost forever, they are nothing like face grain boards sold all over the place. The board will not be ruined by using it.
@@TReischl1 Did you make it? I don't see it in your channel? Also, what is the difference between end and face grain boards? How can you tell? (not a woodworker, thinking to get into it, maybe as a sideline).
@@ibubezi7685 long grain the grain will travel from left to right or top to bottom. face gain means it travels from bottom of cutting board to top.
@@TReischl1 Thanks for the recommendation! I didn't know that
@@ibubezi7685 Yup, got it made, after a few trials and tribulations, LOL. Biggest issue I had was attempting an inlay within an inlay. did not work at all. So I changed the design and it worked out well. I put very little of what I do on UA-cam. Would end up spending more time posting vids than actually making things.
"My First Cutting Board" 😁
I would never be able to let a knife come near it. Beautiful work.
Wow, that was some next-level stuff! Thumbs up!
The most amazing cutting boards I've ever seen!!!
I love seeing you make the walnut base now.
You are an artist in every sense of the word Sir!!
once I watched this kind of work in Bali, fish side sculpted by hand in palisander. I still remember it after so many years. Hats off here as well we westerner have no time
Simply Stunning. This is taking Cutting Board design to the next level. Brilliant!
Thank you!
What a stunning piece of work ..... incredible well done a pleasure to watch
Absolutely breathtaking
This is beautifully insane! I love it. Subscribed!
Wonderful !!!! this is too beautiful to be used.
these cnc routers are amazing, great project and design :)
WOW. I'm speechless. Amazing job.
Just fantastic! You are a Master with a capital letter!!! Good luck And good fortune!
Hats off to cnc... it did a great job!
Absolutely beautiful work. Not sure that I don't admire the amazing computer cutting technology more than the magnificent job that would have been fully hand crafted before the invention of such machines.
I expected to see the design inlaid with resin. Which would have looked cool but this was a whole new level of impressive. Wow...
Stunning..... just stunning!
Seu trabalho é muito lindo, algo de extremo valor. parabéns.
Excellent work! God bless you and yours!
Now this what artists is, well done mate.
That’s a work of art. One of the most beautiful cutting boards I’ve ever seen... thanks for sharing your amazing work. I don’t think I’d be able to cut anything on it though...
Thank you
This is a very beautiful board. Whoever built the software is quite an artist...
Clever and unique!
That’s so beautiful, I don’t know if I’d want to cut anything on it, lol
Wow! Fantastic!
Beautiful. Love this design.
I love it but I could never bring myself to cut on it. Great work you are inspiring.
Amazing work, beautiful
Wish i could get me one of those boards, so amazingly beautiful ❤
To już nie jest zwykłe użycie CNC. To prawdziwy artyzm!!!
Gratuluję pomysłu, skoro opublikowany bez zastrzeżeń to metodę spróbuję skopiować. Pewnie poprzedzone to będzie wieloma wprawkami, ale wierzę że uda mi się. :)))
😍😍😍🤤 I would like to do my kitchen countertops like this I’m in love 🥰 My entire tiny house is inspired mostly by Japanese culture
Great video. It would also be nice to see how you start the process for the cnc. How you program the software with the used picture for the inlay, etc.
Yes please, on my Christmas list.
Thanks for the cutting board, I will put it on display (walks to the store to buy a cheap one)
This is a gorgeous piece of art. I loved watching you create this cutting board. I love your work. You have a new subbie.
AMAZING love watching this
Spectacular beyond belief.
Do you have a video on the designing part of this? I would love to see the full process and your thought process behind it from start to finish.
No see to make the design from scratch, you can download a vector file from a stock photo site and make adjustment to fit your needs.
That is a really cool technique!
I was wondering why you were using a band saw over a table saw while cutting. What i figured is because its a smaller curf line on the band saw. Amazing work you do and i already told the wife im buying a board from you. Thank you for the awesome videos and workmanship. Keep it up
This video is the work of the artist who directs technology. Congratulations.
Stunning!
That is absolutely beautiful
Truly a Quality work of Art!!!
Holy shit!!! Bro! My jaw was dropped during that whole inlay process. You are seriously talented man. Great work!
That is some awesomeness!! Great vid!!!!
Beautiful, just beautiful.
Thanks!
Your work is Gorgeous ♥
Absolutely gorgeous! You could probably do some larger work and sell it as wood art. I'll bet people would really buy it up. Good luck you!
O thank you. Amazing beautiful artwork.
Just amazing!
Work of art! I appreciate the effort to make the inlay out of end grain also
Thanks a bunch!
It's amazing what machines can do now. I used to make jewelry by hand now a 3d printer makes it. The death of craftsman ship.
정말 만드는 정성이 예술일세....👍🏻👍🏻👍🏻👍🏻
Wow! Very nice!
One of the most grand things I have ever seen in my entire life
Why? The only thing he did is programming the CNC...
@@DriversFromHere the technology is also amazing
Wow! Beautiful craftsmanship. If anyone put a scratch on it I’d go nuts 😱😂
One of my favourite cutting board on UA-cam... Good job sir... your work make me speechless 🙏
Stunning work.. Love your cnc
this is called the true creative mind, great job, I love it 👍👍👍👍
Thank you
Obviously your inlay work is terrific, but your video production is also excellent. I really want to try making one but I'm getting anxiety just thinking about making a basic one, let alone an intricate one like yours. Keep up the great work!
Thank you very much!
Very, very impressive!
simply beautiful :)
this is insane. amazing.
Extraordinário, ficou top!
Very nice idea and creative thought, keep it up and mesmerising us with you knowledge and tallent.
Дуже складна робота, але майстер зробив диво! Велика повага!
Gorgeous!! I couldn't use it, only for kitchen display!!
stunning brotha amazing work 👌🏼
How have I not see these before. You should have 2.4mil subs
Thank you! I hope I will soon.
Beautiful craftsmanship I really like your art