Love this artist work very much and wish I had the same skill as this gentleman has and I would love to learn how to make beautiful art like he does one day, anyways I'm amazed at the work and I enjoy watching the videos of the art being made it's pure enjoyment just looking at it happen from beginning to end
That was amazing the whole way through The color pop at the end when the oil was applied, couldn't ask for better! Merry Christmas Broinwood & everyone in the comments ^_^
I have to say, I really enjoy your channel, your artwork is on another level. Your a very talented person, and can't wait to watch each carve. I want to thank you for inspiring me and I'm sure others aswell to invest into a CNC.
Wow! amazing talent, and experience at work here. this just rocked my world, I'm not worthy (in Wayne and Garth style) thank you for producing this vid
Really good job at your work. I saw the detail and you made me want to be better. I thought it'd a very cool idea to do a mural representing the solutions to the world's issues on the front of the board. Or some really cool historical time where good triumphed over evil, and even included the evil being helped. Or some other cool idea like that. Could do both sides, or all all sides. I just come of with the ideas, I know that it takes a lot more work than I can see and guess!!!
Are you using a Vcarve to do the female pocketing, how do you get all the fine detail to go deep mine I cant figure out how to do that and just does not go into the wood deep enough,.
Based on the shape of the spindle, the location of covered tape, angle of the support arms, I will surmise that it is most likely a Axiom Precision Pro model (a previous design (coloring, etc.) model from what is currently on Axiom's site. (an Axiom CNC for sure)
Noticed in One of your older videos, the family sign you were working on separated during glue up. was that due to wood movement and the boards not being stacked endgrain? moving you towards a butcher block style for everything?
I'm sure it's been answered, but is the v-bit you're using a 15 degree included angle? If so, where do you get them? It looks like a small radius on the end. OK if you don't want to give away your secrets.
Nik...I am always mesmerized by your work. I am new to inlay and I see you use 1/8' bit in some areas and the 15 degree bit in others. Am I seeing correctly or do you taper Everything using the 15 degree bit. Lastly what software do you use for toolpathing. One other thing your music selection is also awesome!!!
I have watched allot of your shows. They are great. I would like to see some details on the computer. Offsets, depths. Both for the main board and the inlay. 🤔 They all look so good.
Hi, I'm from Brazil and I love your videos!! Could you tell me what types of wood you used in this video? I mainly want to know what is the name of that wood in the color "bright yellow". Can you let me know? Thank you very much! 😃😃
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
Love the 3d look on the buttons. Of course the entire project is awesome.
Thank you!
It's mind-boggling how good these are!! DEFINITELY a gift!!
Love this artist work very much and wish I had the same skill as this gentleman has and I would love to learn how to make beautiful art like he does one day, anyways I'm amazed at the work and I enjoy watching the videos of the art being made it's pure enjoyment just looking at it happen from beginning to end
Thank you!
That was amazing the whole way through
The color pop at the end when the oil was applied, couldn't ask for better!
Merry Christmas Broinwood & everyone in the comments ^_^
Coolest thing I have ever seen with a CNC. That was Awesome to watch. Those machines never disappoint!!
Fantastic workmanship. Coca-Cola Santa is my favorite Santa painting. All your work is awesome.
Brilliant use of your talent. Very special piece.
Отличная работа! Как и все ваши работы!!! Молодец!!!
Wow!! Absolutely amazing!
Probably the best cnc piece I have seen to date! Very nice and you are for sure a master of your cnc!
Simply amazing!!!😍🤩👏👏👏
Woaaaah, dude! This is magnificent!
If you started another channel with behind the scenes stuff like wood procurement, prep, programming glue ups etc. I'd be all over that
I have to say, I really enjoy your channel, your artwork is on another level. Your a very talented person, and can't wait to watch each carve. I want to thank you for inspiring me and I'm sure others aswell to invest into a CNC.
How beautiful!
Beautiful work!!!
Awesome very nice - this is when technology is great
Pretty insane. Nice to see and knowing this is not easy.
I love your CNC Art it's beautiful keep it up
Wow! amazing talent, and experience at work here. this just rocked my world, I'm not worthy (in Wayne and Garth style) thank you for producing this vid
Very nice ..... Merry Christmas everywhere
Man is really hard work.
This is be very beautiful job.
Thank you.
Wow, Nice work!
Sweet! I like the approach. Very nice. 😎
That is the most Hard core cutting board i've ever seen......
Beautiful 👍👍👍. Thanks for sharing. Merry Christmas and a Happy New Year
I just got into cnc work. Gonna have to subscribe. Nice work.
Прекрасная работа 👍
Very nice!
Excellent!
Amazing work
this is amazing awsome!!
Very nice and creative, merry Christmas my friend!
incredibly beautiful as always
Really good job at your work. I saw the detail and you made me want to be better. I thought it'd a very cool idea to do a mural representing the solutions to the world's issues on the front of the board. Or some really cool historical time where good triumphed over evil, and even included the evil being helped. Or some other cool idea like that. Could do both sides, or all all sides. I just come of with the ideas, I know that it takes a lot more work than I can see and guess!!!
awesome job congrats, love it
insane! great job!
My favorite so far!
Amazing work!
LINDO , Beautiful
Awesome work
That's way too amazing work 😍👍
great work!!!!!
So creative! Love your work!!!
Saludos amigo. felicidades por todos tus trabajos. Quisiera saber si tú mismo haces los vectores?
Wow. Keep it up. Love it.
very cool workin!!
Amazing work!! Awesome! 💓
Incredible
gorgeous!
That looks great.
Stunning & seasonally appropriate. Another 5🌟 piece!
just wow!
Was checking out your bits - so you're just using the 3-flute up-cut one for your rough cuts and then the 6.2 deg v-bit for all the taper cuts? 🎅👍
Looks perfect. Why you use the orbital sander with towel beneath?
Its so beautiful:)) I like your style man.
Happy new year mate 💫🥳🇺🇲
Hola amigo, hermoso trabajo muy bonito trabajo
Wow, so impressive. Never thought something like that was possible
Wicked and I love my homemade cnc
That's great I like it
brilliant
😍😍😍😍😍 Guys, you're the best
OMG,and I’m not just saying this cos coke is my favourite drink ever, but this is frickin awesome
What a fantastic piece of artwork. Looks incredible 👍👍
On the next one can you show your clamping? Curious how you get those suckers to stay in there.
Very nice
Обалдеть! Впервые такое вижу.
amazing
Love you work! Just starting to do inlays with my CNC as well, wandering what feeds and speeds you use?
Amazing 👏. Just started 3 d printing, laser engraving and now looking for cnc router. Such inspiration. Thanks for content
I always watch 2x speed👍music is always better too👍
Do you set up your tapered bit as a tapered bit in vcarve or do you transfer the measurements over to a vbit? Applogies if this has been asked before.
Level god exist...awesome...love your job
Love from India 💐😊👍🏻👌🏻🙏🏻🇮🇳❤
Are you using a Vcarve to do the female pocketing, how do you get all the fine detail to go deep mine I cant figure out how to do that and just does not go into the wood deep enough,.
Great project! I wanted to find out what type of CNC you are using but couldn't find it in the credits. Can you please list? Thank you!
Based on the shape of the spindle, the location of covered tape, angle of the support arms, I will surmise that it is most likely a Axiom Precision Pro model (a previous design (coloring, etc.) model from what is currently on Axiom's site. (an Axiom CNC for sure)
@@scbatesrd Good to know because I've been seriously looking at getting an Axiom table
Noticed in One of your older videos, the family sign you were working on separated during glue up. was that due to wood movement and the boards not being stacked endgrain? moving you towards a butcher block style for everything?
Very cool project Bro)
Missed an amazing opportunity to use Padauk for the red of his suit and the label of the soda.
I'm sure it's been answered, but is the v-bit you're using a 15 degree included angle? If so, where do you get them? It looks like a small radius on the end. OK if you don't want to give away your secrets.
Inacreditável
How many ounces of glue do you go through on your typical cutting board?
I am new to CNC and wondered if you have a file for sale to cut the spoil board to accept the pvc pipe?
Nik...I am always mesmerized by your work. I am new to inlay and I see you use 1/8' bit in some areas and the 15 degree bit in others. Am I seeing correctly or do you taper Everything using the 15 degree bit. Lastly what software do you use for toolpathing. One other thing your music selection is also awesome!!!
wowowowowow. but imagine if santas suit was made from Padauk or Redheart.
Amazing. I want to buy one😁👍
Great gob! What kind of wood are you using for this project?
Great !
What software did you use?
How long does the entire job take? And what can you charge for something amazing like this? I guess $2000 or more?
Beatifull job!!! A question.. how Many time cnc??
Love the work, hate the boring music.
I have watched allot of your shows. They are great.
I would like to see some details on the computer. Offsets, depths. Both for the main board and the inlay. 🤔
They all look so good.
What is the spoil board! that looks amazing for my axiom!
That's a nice project have you thought about showing the process and tool paths??
Hi, I'm from Brazil and I love your videos!! Could you tell me what types of wood you used in this video?
I mainly want to know what is the name of that wood in the color "bright yellow".
Can you let me know? Thank you very much! 😃😃
Only imagine how much that would be
What is your speed and feed rate? Hard to tell with the video sped up...
Great work!
What software did you use?
Waw.so cool and so precise.i wonder how much this costs to make a portrait of my kids.