What ecu programming did you use? I have a spare 01 Silverado I just switched a rwd 4L60e into and a shell of a 91 S-10 but I'm lost when it comes to the wiring needed or should I say best suited for the setup and would like the option to go turbo later on. Any help would be greatly appreciated.
Weight transfer interesting subject did a hemi dart project with a guy in Huntington West Virginia a few years back the wheels Wood shimmy when I come off a big wheel stand for the weight transfer geometry to be proper the squat in the truck has to match the ride height in the frount .what I mean is to transfers less weight as possible we moved the darts body backwards on the frame a couple of inches my backward... Hope that helps old school we didn't have turbos and we were kids power and traction equals breakage..
Ah the good ole KD hill climb. "stay in it and don't let off the gas or you scrape" lol. That used to be recited in town on a weekly basis. Last time I was there I would have been more worried about that left lane on the hill the way it dipped. I've heard they have done a lot with the track though. I've had to miss the midnight madness up till now. Not going to miss them when they start back. I loved it last year. A long time hot rod/racing buddy went. He came back to work shook up!! He said you don't understand these guys are effin crazy!! He said these are the fastest street cars I've ever seen. Yes, I do understand my friend, welcome to 2020 and the life of 3bar! That ole 540 is nice, but ill take my lil 408 shoving 2-3 atmospheres in it loving it strong!
I love how much of a Midwest Backwoods vibe this video has. Like I'm assuming the gentleman in the overalls is either a father or grandfather,but it just gives me a bootleggin type of video, I don't I'm probably speaking gibberish rn😂😅
The truck turned out looking bad ass what are you going to do about a weight ballast with that thing. You added a couple hundred pounds to the front end and there's already no wait in the back
Im running a twin turbo S10 as well. Makes great power. Im also running Calitracks. Does not hook at all. Any pointers on were to set them for starters?
Zak Oldham oh ok thanks. Just curious because Im dealing with a silverado now and the rear end sits below the springs, making cal tracs rather difficult without changing it
it would be helpfull if you had a list of every component for ex. cam,heads,rollers,rods.etc,,, edit: i also know if u did it would be telling ur secrets
Great work guys. Hooking that 10er is a real trick. Looks like y'all got it figured out
Nice build not much room with the turbo's in there, I just finished installing a 5.3 LM7, in my 92 S10, got it fired up a week ago.
What ecu programming did you use? I have a spare 01 Silverado I just switched a rwd 4L60e into and a shell of a 91 S-10 but I'm lost when it comes to the wiring needed or should I say best suited for the setup and would like the option to go turbo later on. Any help would be greatly appreciated.
Drone shot of the race was freaking awesome!
Weight transfer interesting subject did a hemi dart project with a guy in Huntington West Virginia a few years back the wheels Wood shimmy when I come off a big wheel stand for the weight transfer geometry to be proper the squat in the truck has to match the ride height in the frount .what I mean is to transfers less weight as possible we moved the darts body backwards on the frame a couple of inches my backward... Hope that helps old school we didn't have turbos and we were kids power and traction equals breakage..
Ah the good ole KD hill climb. "stay in it and don't let off the gas or you scrape" lol. That used to be recited in town on a weekly basis. Last time I was there I would have been more worried about that left lane on the hill the way it dipped. I've heard they have done a lot with the track though. I've had to miss the midnight madness up till now. Not going to miss them when they start back. I loved it last year. A long time hot rod/racing buddy went. He came back to work shook up!! He said you don't understand these guys are effin crazy!! He said these are the fastest street cars I've ever seen. Yes, I do understand my friend, welcome to 2020 and the life of 3bar! That ole 540 is nice, but ill take my lil 408 shoving 2-3 atmospheres in it loving it strong!
Good to see you got back together
I love how much of a Midwest Backwoods vibe this video has. Like I'm assuming the gentleman in the overalls is either a father or grandfather,but it just gives me a bootleggin type of video, I don't I'm probably speaking gibberish rn😂😅
Lost you there for a while back watching you though glad to see that you're still killing it Oh pops is still hanging with you too Cool
Clean build!!! Great music..
The kd hill climb, love it. It’s something else
Like that drone view keep it up!
Badass build! Just got a square s10 as well with a 350 and a turbo 400 trans. Any suggestions on what to do
Finally !!! Iv been waiting on this build as I'm doing basically the same set up. Nice work man !!!
currently doing a procharged 427LS hopefully by next spring it's finished I'd like to come meet up I'm in OH also
Nice build bro !!!
The truck turned out looking bad ass what are you going to do about a weight ballast with that thing. You added a couple hundred pounds to the front end and there's already no wait in the back
Welder/Fab Man are strong. Super clean work.
What carburetor and cam are you running .. love this s10
Cool video, nice SBC, and excellent background music!
Bad a$$ build guys,I've followed it on fb but the new name for the truck & on the plate should be "S-twin"
Chevypowerdfox555 perfecto
Or the turbo 10
Psi s10
I like that s-twin
These are the builds I love
Is the rear axle the same one that came with the truck? Or did you have to change it
I'd be happy with 10 Hp extra out of my 4.3L blazer lol
And that is why no1 will know your name
@@marcuslimbaugh4592 damn marcus
@@marcuslimbaugh4592 he might not care about that. Not everyone wants attention
The Truck is Bad Ass as Hell this time around.
I know I’m way behind… what turbo headers are you running? Custom built..?
Sweet ride man good luck with that new motor, I'll be watching.
Yall boys in Bg I seen yall at Street Car Takeover you raced my buddie in the ls f body you put in work that truck is fast bro!!
Did i just hear Billy say "Bo" lol he sounds like he is from my neck of the woods! I thought only huger, S.C people said Bo! Lol
Why is the gold bar that went over the top of the rockers?
intro goes hardddd
What kind of thermostat housing are you running?
I thought I saw Billy's as10 on the Street Outlaw show back on the 12th but it said some guy named Maverick
Poor heads. Never use an extension unless unavoidable. And even than use the shortest to do the job. You torque could be way off across the board.
I stopped breathing when I saw that.
Ya high school shop class 101
He also finger fucked the hell out of the head gasket. I hope he didn't install the cam without gloves to.
All you little experts.....make me laugh
That's A Nice Build
Excellent build, great to see you back I can't wait for more videos..
Can’t get enough the videos family vibe pod cast style Ohio smack talk. All good
Im running a twin turbo S10 as well. Makes great power. Im also running Calitracks. Does not hook at all. Any pointers on were to set them for starters?
A little more details on rear end. Ford 8.8 31 spline Moser. 3.90 gear. 345 35 18 Mickey Thompson SS.
Any help would be greatly appreciated.
Thanks
Could u show how ur frame is braced
Awesome build. Mt Vernon. Nice I live close to there.
You plan on coming to Salem, Quaker specificly before the seasons up maybe king of the concrete or something I'd love to come show some OH love
You should start a wheelie counter in the truck and put it on a dial clock😂😂😂
Nice to see a boosted gen 1 sbc!!
Gonna need some fancy foot work or some bars out back? No matter what...badass work boyz!
OOH WEE IS THE DRAG WAY LOCAL TO MT. VERNON,OH.....??? IF SO WHAT'S IT CALLED & WHERE IS IT AT.......
what turbo kit is it you run buying one my self shortly thanks
I’m not familiar with the s-10 in the rear. Did you have to move the rear end on top of the leaf springs or was it already that way
They come factory that way
Zak Oldham oh ok thanks. Just curious because Im dealing with a silverado now and the rear end sits below the springs, making cal tracs rather difficult without changing it
Been watching your videos for year or so and this video is sick! Love the build
No re-bracing of the core support ?
Always a pleasure man, love that truck
I would love to know the brand of that hood and where they got it
The S10 is lookin Killer Son... #GetThere#Sendit
What headers are you using bro.. nice build
What kind of radiator are you running
What is the Motor set up? Compression Cubic in Cam?
Is this a aftermarket block ?
The KID is Back!! Nice Brother!!! Kick some ass!
About how much does that engine set up cost to build?
Might want to put decent suspension in it...
So, did you name it Boos10 ?
Fast truck! Beauty!💪
how much to build start to finish
What mm turbos are you running, and have you dynoed it yet?
What happened to the blonde chic?
He said she's GONE!
Fell off a cliff. Died on impact.
She's riding in Johnny's mustang now!
Why twins over single?
how hard was it swapping the 350 in the s10?
So cool man !! I cannot wait be able to drive my car down the road. Then make some hits. Super cool man.
Nice work man, the new setup turned out super nice. 👍🏻
What turbo headers did u use
When are we gonna see Luther's car with the additional kit you sold him lol
Old school sbc, twin turbo, and in a S-10. Priceless. 💪💪👊👊👏👏👍👍✌✌
Would’ve thought you had screw in studs for the heads.
Stock GM 4 bolt block?
Did you buy the S10 from a guy in indiana
Now we need to see this vs. Slowerthanu's ls Nissan
How do we buy swag
How much was it??? I'm local
What turbos are these
Great musik! Who is it?
Greetings from Sweden!
I’d like to know as well!??
I just recently saw the ig video of this truck doing a wheelie
Tires didn't hold on the 5 lbs hopefully you have plans to swap to a big tire. Love the truck but all I can afford to build is NA stuff
you have no idea
Domes in a turbo engine? What's compression ratio?
Ya, thats what I was thinkin
Is that a 350
Would you share compression and cam specs?
Asking a racer for his secrets, come on.
I love this truck bad ass
Back in the Saddle!!!
Where’s the video with crazy wheelies I seen?
My mistake it was Street Outlaws race night in America untouchable
my opinion: Tire Pressure first. Put the 3 clicks back in. It hooks like hell!
It just ain't the same without that smiley-faced giggling MCKENNA in the vid's man!
S-TWIN for the WIN!
it would be helpfull if you had a list of every component for ex. cam,heads,rollers,rods.etc,,, edit: i also know if u did it would be telling ur secrets
Fuckin A bud. You’re killin it...! Stranger to stranger, I’m proud of ya! 👊🏻
Maman qu il est beau ce moteur une c'est une œuvre d'art ce moteur est trop beau
Love the truck s 10’s are my favorite!!
Hell yea man. Killer video
2:45 so we're all gonna move past that like it didn't happen or
Right on keep it up
I’d like to know what stuff you guys used on this set up, would like an idea on what it cost you guys
Just from the headers to turbo to intake
Great to see her out again ! Look forward to you spanking him when you are dialed in !
Good work
Stick build!