You know what else is great? Your attitude ,all of these other gearheads are asking questions,they've all got enthusiasm, and you answer every one with same enthusiasm, that's the way to be! Keep it up,great job
@@waterzonegt9179 Sorry, just seeing this. I did make them, they were purchased from Mr. Gasket. Would be neat to make some though. Thanks for watching.
Nice build. We put a junkyard 400 and turbo 400 in my buddies. It didn't take long and he broke the rear. We got a 14 bolt from the junkyard. Had it narrowed to fit. No issues after that. Even with the 200hp shot of nitrous. It was running a 7.9 in the 1/8 mile.
Wow, that is a cool story. I love hearing that you had so much fun with it. I want another 4X4 S-10, my current S-10 is a V8 2 wheel drive. It is fun, but nothing like the 4X4's. What ever happen to it and thanks so much for the update and for watching.
Come to think of it, I had a grey one and a green one. I assume you are talking about the green one. Have you seen the videos of it on my channel? Thanks again.
snowmangsx1100 Thanks, I almost did another at the beginning of summer. Some guy was selling one in my town. I had an LS motor in it that had been pulled. Everything was there except for an engine and transmission and he only wanted $700. Long story short: It sold before I could get to it...
hey right down the street here from my house a garage has a pretty nice S10 body for sale,,its black with a raised spolier on the hood and aint to bad for 700 Dollars,,Id use it but my truck is much nicer and would make a cuter sleeper,,haha,,I might can get a photo of it and send you later.
If you are talking about that S-10, I actually sold it before I could get to the stuff mentioned at the end of the video. I didn't even want to sell it, but I got a super offer. However, I am constantly looking for my next S-10 project, I hope you will tune in when it happens.
chud327 hey man, I'm building me a truck for my first vehicle. I had a ton of questions to ask you if u don't mind helping me out. Was the transmission Manual? If it is/was what shifter did you use or was it already on the truck? I don't know much about the s10 but do they all have the one legger rearend? And my last question is do I have to relocate the gas tank when I put a muffler on the truck or no? Thanks for you help in advanced.
Sorry, just seeing your questions. 1st - Mine was an automatic, but I used to have a 5 speed blazer with a 4.3. The V8 will bolt right up to where the 4.3 was. The rear ends are most likely going to be one leggers from the factory. If you do dual exhaust on one side, the tank can stay. I have done it both ways, but I prefer to leave the stock tank in the truck. I hope this helps and is not too late, thanks for watching.
I just bought a 86 s10 with a sbc 400..my flywheel is going to need to be replaced soon..but i cant get to the bell housing bolts due to clearance..any advice?
Possibly remove crossmember and lower transmission enough to g t some long extensions up in there. Good luck and thanks for watching. BTW, did you see my latest video? Another complete S-10 build. It just came off t Saturday…
I have a 98 factory 5 speed chevy blazer with the 4.3 that I'm gonna be doing a v8 swap to this summer .. For now it's my daily driver lol .. Thank you for your vids I love them !!!!
Herbert Humphrey Thanks for the compliment!!!. Good luck and if you run into any questions during your build, I am only a comment away. What are you going to put in it and are you going to make us a video?
I have an '89 s10 i'm wanting to do a 350 swap to but am clueless about it haha gonna have to give your videos a good run through several times :) thanks for sharing!
Gary Cifers It is my pleasure and the more time you watch them, the smarter you'll be. Thanks for the comment and good luck. Are you going to make us a video?
I just built my 454 I’ve bored it over 30 and put 396 heads and camed the crap out of it but I’m not too sure if I need to get and weld motor mounts or can I use the existing mount holes as well as I’m not too sure which trans to go with to keep it manual
hey a quick tip on bleeding your brakes,,next time your at auto zone buy you a a foot or so of wind shield wiper washer hose or some of the very small gas line that will cup over the end of the bleeder screw and hand to the ground or into a bottle and you can save the mess of it srpaying all over your rear housing and brake dust covers,,also if you can have someone to help you use a short enough piece of hose and let the end go down into a bottle of brake fluid and all you have to do is pump the brakes and release and it will take the air out,,long as the level in the bottle is above the hose it want let air get back in but requires the bottle to be close to the wheel cylinder.
snowmangsx1100 I used to have one that had a short hose and a magnet on it, but I don't know what happened to it. I should make up another and make a video. I am on the edge of bleeding the brakes on my dune buggy project. I'll try to build another bleeder device for that.
+ToadNumber55 Hey, thank for watching and for commenting. I just sold mine a few months ago and I already have the fever to build another, I think it is in my blood. I hope some day that I can see a great video of your S-10 with its V8. I suggest that you go ahead and start collecting parts and try to find a nice body. Good luck and thanks again.
john ward If it is your first time, I would recommend getting the book from jagsthatrun.com. It used to be 19.95, but I was always too cheap to order it. It walks you through step by step. Other than that, take your time and do it the way you want it. I would also suggest that you build us a video of the whole process. Manual or automatic?
Well the S-10 will make you more of a Chevy man or it may make you hate them. Depends on how the build goes. What you described is what I would have done if I were no doing mine on such a tight budget. I went with a cheap 307 and my turbo350 was a left over from a previous project. 350 and 700r4 would have made my build much better! Good luck and feel free to ask me any questions that pop up... Regular cab or extended?
this one is my favorite movie of all of them... this is the one I watch daily. I have found the 94-2000 s10 blazer has the tank in the right location for dual exhaust as well as the filler neck is on the drivers side. I am seriously considering that route when the weather gets better and now that I have a job I can afford some of the good things..what are the mufflers that you have on this truck, I like the sound. 69 camero looks good, but I am partial to the 15 inch z28. I have had 4 s10 in my life and all of them get the z28 rims
Wow, you watch it every day, you deserve a big thanks. Have you entered my Swiss Army knife giveaway yet? It would be super nice if a real fan won it. I think all the Blazers had the tank in the back, which is perfect for the dual exhaust. I had Flowmasters, but I don't know what series they were. I have loves S-10 with the Z/28 wheels too, It is a great and inexpensive way to make the truck look so good. I have had, I think, 14 S-10s in my time. That is if I haven't forgotten about one or two... Please keep watching it, that is some of the best news I have heard all day. Definitely the best comment of the day and maybe even the week. I can't wait to get my next S-10 project, I'll be sure to make some videos! BTW, I am working on a video that has some of all my old vehicles, currently there are 10 of my S-10 in that video...
Got my 350 on the stand and a re buildable th 350 trans. Got a couple prospect s-10s I've seen from the road really want one with the bed full of trash!😂
The brother-in-law gave them to me, I don't remember where he found them. I had them on the self for a long time before actually using them too. Thanks for watching.
When they are closed do they leak exhaust into the cab from under the truck? Or are they pretty air tight once closed? I'm debating whether I should go with this set up on my 1985 Ford Ranger V8 (302) with a c4 automatic and 8.8 rear end from a explorer. www.opgi.com/exhaust/header-accessories/cable-operated-exhaust-cutouts8/exhaust-cut-out-cable-operated-mr-gasket-ch24872.html?gclid=CjwKCAjwj6SEBhAOEiwAvFRuKASS02BuK7NUfHr9BKuSP8bKO_7hfYmrKUuHctpT8zbO2Jy8U_IvqRoCVfgQAvD_BwE
One_Clean _s13 I see it as simple, clean, and easy. Thanks for your comment / compliment. Did you see my 9 minute burnout compilation video from this morning?
If you watch my burn out videos, one has the ground, behind the plates, covered with black snow that is smoking. The kids couldn't figure out what all the black stuff was... Thanks for the comment.
I raced a guy that had put a 302 in a Ranger once, that thing was so fast. It had a stock 302 with little street tire on back, but he knew just how to drive it. That or it had magical power. Thanks for watching and for the comment.
well I haven't made any videos on this build but I wish I did.. it came out pretty smooth...and im with u on tha burnouts lol ant nothing like smelling some burnt rubber...u got some kool vids to bro good job
+nick c Wow thanks, I have a bunch of these S-10 videos. I am glad you liked it. I am looking for my next S-10 V8 build for when my current project (my tiny house project) is finished. Thanks for watching.
Thanks for responding Chud, im currently gathering parts for an upcoming s10 v8 swap of my own. I watched two of your videos so far and they helped out a ton already.
Im thinking about doing a project like this and was wondering if I could do it for 2 grand? just to get it driveable and than I'll put more money into it every couple weeks when I get paid
+Gavin Cayan There are a lot of variables that you have to know. Do you already have a truck? Do you already have the V8 engine? If you have either, you should be able to do it for 2K. Summitracing.com sells V8 swap kits for $500 - $600 and they have pretty much every thing you need but a radiator. If you look on Craigslist you can probably find an engine for $500. Did your truck come with the 4.3, if so you can use the stock transmission. If not you are going to need 2 or 3 hundred to get you a trans. Like you said, 2K could probably get it running and then put more money into it every couple of weeks to finish it up. I would think it would work. I want to see some videos when you get it done.
chud327 I'm picking up an s10 for 250$ and I can pick up an engine and transmission for about 600$ Unfortunately it was just a four cylinder but I'm going to buy mostly used parts. The only thing I'm buying new is the V8 mounts
next time you bleed your brakes use a piece of windshield washer rubber hose and push over the bleed screw and let the hose hang down into a bucket on the floor so you want squirt fluid all over your pretty painted work,,Rick
I have used the self bleeder like that but i don't have one. I could build one, but I guess I am too lazy for that, maybe next time. Thanks for watching.
What exact gas tank did you use because I'd like to do the same setup? Not a fan of a fuel cell on a street vehicle. I have the engine and trans already in, but I plan on adding vortec heads and a bigger cam soon, as well as a Edelbrock carb, the holley is fouling my plugs and giving me terrible gas milage on a stock 307. Thanks for the video and it was entertaining to watch.
I used a 1969 VW Beetle gas tank, but if I could go back, I would use the stock tank. It has the electric fuel pump and the gauge sending unit. It sounds like yours in going to be really sweet, do you have videos of it yet? thanks for watching.
Chud, i'm not old enough to drive yet, but am strongly considering an S10. I have three questions. 1. How much did the whole project cost? The only thing I don't like about the truck is the 4 cylinder engine. 2. Was the effort worth it? 3. Was any fabricating or metal work done to fit the V8? I know the truck is little and probably doesn't need a large engine. But it's just so much cooler in my opinion. Thanks for a reply.
Brody Tunnell I've had S-10 with 4, 6, and 8 cylinders. If the original engine runs fine, I would change it. The 4 cylinder is not as cool as a V8, but it is much better on gas. The last truck I built had a blown up engine when I bought it. It was 2 truck bodies and a bunch of parts for $200. I could not turn that down. Then the build only cost me $600 just because I had a bunch of the part in my garage left over from other project. If you had nothing, it would probably take $3-5000. That is depending on how much you do to it and how nice it is, some people spend over $10,000, but I am not one of those people. To fit the V8in the S-10 all you need are special motor mounts and they are $69-$99, depending on which engine the truck came with. Then you'll bolt everything else on. It was worth the effort to my because I love working on stuff. And no the small truck doesn't need a V8, but it sure is nice, fun, cool, sound good, easy to work on, fast, great resale value, etc... If you don't want to do all the work, get one with the 4.3 V6. The Vortex 4.3's are a great engine. They last for ever and can be really fast. Or do what I did with my first V8 S-10. Some guy did all the work for me and then he got tired of the truck. I traded my stock 4X4 Chevy for his V8 S-10 plus he paid me $17,000. Now my truck was much newer and nicer, but I was selling it anyway. Hope this helps and start working on it now for when you turn driving age...
What transmission did you go with I’m fixing to start my build the truck was originally 2.2 5speed would love to stick with a 5 speed but just wondering what transmission would be the best for my application
I went with a turbo350, just because they are abundant and cheaper to find. I would rather have a 700r4 or even a new model auto. I love the idea of putting the 5 speed in one too. Good luck and thanks for watching.
This took me a year or two, but I was in no rush. I was trying to do it as cheap as possible buying everything used off of craigslist. You can do it much faster if you want to buy some new stuff. thanks for watching and good luck with your build.
Looking good there buddy! I've heard a mixed bag of results on the air gap intake but am anxious to see your "seat of the pants" upgrades on the S10 and how it improves power and performance.
I went looking for that intake at the Daytona car show and found it. I had that it on my old 400 and I loved it. Thanks for the comment and I can't wait to see the upgrades too.
I didn't use the stock wiring, I ran a hot wire to the distributor to run it. The key only worked the starter on this one. Good luck and thanks for watching.
There's another easy way to check to see if a rear axle is open or posi is by jacking the rear end up so the tires r off the ground, put in neutral and spin one of the tires by hand, if they both turn the same way its posi, and if they turn separate ways it's open... And u mite wanna put a different air cleaner on cuz that stock one will cost u horsepower... Just a couple tips that mite u or others... Thanks for showing your build, looks like a fun little truck
Good tip on the open vs. posi. As for the air filter, that little 307 wasn't really for power. It was just a cheap, good on gas, sounds good, getting it running engine. Maybe next time, we will get into some power. Thanks for watching.
Have you ever seen the show Engine Masters on the motor trend channel here on UA-cam? If haven't you should check it out... They test all different High Performance parts on a dyno to give you real horsepower gains or losses...
A 4.3 v8 does exist in the mid 90s it was deemed the mini lt1 motor as far as one being in an f150 by ford idk and that would be a crime to put a ford motor in a Chevy anyway lol but the chevy _4.3 v8 is not bad it's like a 305 just with reverse cooling and fuel injection lol
I am about to do another, it has the 15 inch Camaro wheels currently on it, but I have a 16 inch too... we will see what it winds up with and thanks for watching.
Super impressed with the swap! I was just wondering what you did for a fuel system? Did you keep the return system or make it a returnless, also what was that fuel tank out of? Thanks!
Thanks and the fuel system was returnless. I used a tank out of an old VW beetle. Next time I plan to keep the stock tank with a pressure regulator and return, that is what I did on a V8 Blazer I did and it worked so great. Thanks for watching.
Nice ride!!! I just bought a 91 2.8 5spd reg. cab w/short bed. perfect body, original patina powder blue color...... all works and complete ! $200.oo. 6/12/19. and it begins! just sayin
that is dope man great video and great truck ,I bought me a 91 s10 and I'm swapping a L's motor 5.3 vortex , and you just help me a lot when it comes down to the drive shaft and rear end thank man 👌👌
Looking to swap my 91 4x4 ext cab and 'm deciding between just getting a tbi 350 and carbing it or taking on the possible headache of an ls. I am leaning more towards old school but not sure where to start and if some things that are already in truck will work and line up or not. Any thoughts be great, thanks! Love the video by the way, better than the others I watched
I have already done or had 3 old school V8's. I hope to do a LS next time, if I ever do another. They are more expensive to start with, but in the long run, I believe it would be less expensive to own and operate. The LS's have a ton of power too... If you want to build one on a budget, I would probably go with a old school... Either way, would work for me. Keep me up to date on what you do and thanks for watching.
Did the 3:42 rear end drop your highway mph and rpm? And by how much? My 3:73 and turbo 350 scream 3000 r.p.m. at 55. And what gear locker set and part numbers please! Also I seen your motor mount plates were cut and you used the top hole, so did you have any issues with that being lowered into the frame? Like hitting the oil pan or fuel pump? I just drilled out my mount holes and it gave me 1/2 inch more clearance for my headers and stuff just didn't wanna go to low to sit the oil pan on the frame. Man you're a top mechanical engineer!
I never got mine on the highway enough to test it, some one bought it before I got tag and insurance on it. However, when I went to 3.42, that was high than what it came with. It should have raised top speed and lowered rpm's. I don't know the locker numbers, it came in the rear end when I bought it. I know it was made by Richmond. I had no issues with oil pan, fuel pump, exhaust, or anything hitting. Thanks so much for watching and I hope this helps.
hey chud next build check out titans engines. there out of ocala there prices are unbeatable and i seen on your vid u bought that rear end from jaxonville lol i live close to there
Love the tip, I love unbeatable prices. I kinda have the fever to do another, but I have to find a body first. Your name sounds familiar, do we know each other of have we talked on here before? Thanks for watching.
I had a switched hot wire that ran to the distributor and the key switch ran the starter. That was pretty much it, sorry I didn't cover that better. What are you building and thanks for watching.
I am in Florida, where are you located? I would love to find someone that wants to finance the build and pay a some for labor. That would also be an excellent opportunity to build another couple of videos... Thanks for watching.
CrackpotPuma I didn't use the wiring harness on this build. I ran a hot wire to my distributor and I had a push button for the starter. I left all the original wires and was going to hook up the ignition and gauges and whatnot, but I sold the truck before I got to it. On my V8 in a 4X4 S-10 Blazer, I had the key to start it and all of the gauges in the dash worked. I just depends on how much time you spend on putting it together. I recommend have every thing work like stock. Please ask any other questions and make us a build video. Hope this helped.
yeah im actually in the process of a 350 s10 swap right now just need the radiator and the mufflers and itl be ready for tags and inspection thanks for replying ....
thanks for making the video. I like the dual exhaust idea you had and moving the gas tank. I know you said it was a VW tank, but what vehicle model and year did it come from? thanks for taking the time to share what you learned. id like to do the gas tank swap to mine when I do the v8 swap next month.
Thanks you so much, I love making videos. As for the tank, I used a VW Beetle tank. The year of the bug is unknown, but it has to be one from a 1969 to about a 1972, those are the year bugs I had. However, I had a Blazer tank that I could have used. It would probably have worked better because of the electric fuel pump. Keep me updated on how you build is going and be sure to ask if you have any questions.
@@chud327 I got a 91 4.3 sonoma automatic, regular cab. Wanting to put in a v8. Can I keep factory frame mounts and is transmission mount going to need moved? Also, what is a good posi rear end that would bolt right up in mine? Mine is 308 open wheel.... Wanting a posi... I just realized this thread is 8yrs old. Lol, hope this message finds you doing well and I hear from you soon. Thanks
@@JoeJones-qg3de I think you can use the 4.3 mounts and the trans mount might work too. Just double check some how I could be wrong. I had a Camaro posi in one of mi e, but the should be other factory ones that work. I had a newer blazer with a factory locker, you might just change the whole rear end out. 8 years don’t matter, S-10s are still my weakness. Just put out a LT1swapped S-10 a little over a year ago, hope you will check that video out too.
Mine was a one wire alternator, you just run the wire from the alternator to the positive battery post. If your's in not a one wire, I don't know how to tell you to do it. Good luck.
hi! I'm conrad and I'm working on an s-10 84 4x4 truck that was my dads so i am doing a v-8 conversion. and the 350 engine is out of my 1979 chevy 1/2 ton that i am going to restore too as well following my s-10 v-8 conversion any thoughts on the build i like the s-10 video , so i have one
I tell you what chud327 I watched your videos 100 times over doing my first engine swap unfortunately I blew that engine shortly after completing the swap that was my first ever engine swap on my first vehicle its 6 years later and now I’m putting a 383 stroker with a T56 transmission in my 87 BMW You taught me a lot check out my channel!
Sorry to hear you blew your engine, but very glad to hear you are doing the 383, I have always wanted one of those... Loved the 100 times part and have you seen my latest S-10 V8 swap Z/28 budget build. I make my old one look bad and has really gotten great views and feedback. I would love to hear what you think and feel free to watch it 20 times. Maybe not 100 because it is 44 minutes long. Thanks for the update and planning to check you channel out now.
Nice build. What transmission did you use? Also I converted mine to disk brakes but they have no stopping power. I wanted to know if you had any idea why.
I used a turbo350, but would rather have had a 700r4. I don't know about your breaks, maybe bad booster, no vacuum, wrong proportioning valve... good luck and thanks for watching.
Just seeing you comment. I am almost finished with my next square body, hopefully better than all my others. Video should be out in a month or so, hope you will check it out.
Sounds like a perfect father and son project. I have a ton of S-10 V8 video with more details than this one if you need to see how I did pretty much any step. Good luck and I would like to see it when you get it going.
I believe it was a power fluids, but I have had so many… I would prefer a 700r4. The shifter, I think, was a hurst quarter stick. Good luck and thanks for watching.
I would guess, and hopefully Chevy guys won't hate me for saying this, a narrowed Ford 9". They are strong and super easy to change the gears. I had one, but sold it with my old Camaro... I hope this helps and thanks for watching. BTW, I am a Chevy guy myself...
Hea Chud. I just seen this video. What did you get your locker out of. I like them, kinda weird the first time you feel one out lock in and out in the corners. Great video man, yeah..like I mentioned in the other video, I'm looking for a posi swap for that 93. So, I can't believe you sold it after all that wrenching. On to the next project, I guess. Oh, your motor mounts, who makes them? Thanks Chud, Goose.
+PantyPirate OK Goose, don't rub it in that I sold it. Just like pretty much everything else I sell, I start regretting it as it is going down the driveway for the last time. That locker was a richmond that someone else had installed and I got the whole rear end for the low price of $150. I thought it must have been broke, but I risked it and loved it. And you're right, on to the next project. Right now I am build a tiny house, have you seen that series yet? But I am keeping my eyes open for my next S-10 project. I love those little trucks! The motor mounts came out of a parts Blazer that a friend gave me, I don't know who makes them. You can find them on summitracing.com, jeg.com, jagsthatrun.org, etc. I had a different S-10 with a V8 that I picked up from my neighbor through some trading. He put a posi rear end chunk out of some Camaro or Firebird. He did it himself, I have never done a rear end before. I think I have already deleted that video, it was old and poor quality. Thanks again and let me know when you get it done.
+chud327 , thanks friend. I will get to your tiny house video's. I will keep you posted on the progress, that's so funny Chud, cause I haven't done a rear end yet either, but I see it happening pretty soon. I know, I'll get a Camera on it. It's pretty easy to figure stuff out with youtube. If you don't break new ground, how do you know you can't do it. Never be afraid to fail, cause that just means you had the courage to face new challenges.
+PantyPirate Amen to youtube being able to teach you. I am always looking stuff up on here. If you do fail, you will learn something and you can try again. Yes, keep me updated!
was putting a 4.3 in my s10, but decided to turbo the 2.8 after the bottom end is rebuilt. I was using a 1-1/4 holesaw and the frame chewed the teeth up everytime.
Might need to by a good quality hole saw and I squirted a little oil on it. Good luck and let me know when you have success. I want to see the turbo 2.8.
You know what else is great? Your attitude ,all of these other gearheads are asking questions,they've all got enthusiasm, and you answer every one with same enthusiasm, that's the way to be! Keep it up,great job
l Love your comment and thanks for watching.
@@chud327 i like ur s10.
Thanks, it was fun, BTW, have you seen my current V8 S-10? It is fun too. Thanks for watching.
chud327 where’s the vid on you making those exhaust cut outs
@@waterzonegt9179 Sorry, just seeing this. I did make them, they were purchased from Mr. Gasket. Would be neat to make some though. Thanks for watching.
wow man Im a mechanic of 40 years and put many motors where they didnt belong but must say Im impressed with you.
Thanks that is neat to hear! Thanks for watching and let me know how your build goes, I am excited for you.
chud327
hey, are you still looking for an S10?
Hi i want to know if í can put a v8 in s10 5 Speed the s10 is 4 cylinder
@@papogonzalez2592 no you cannot... that is a nv1500 trans that is only rated for 150tq... and it will not bolt up to the 350v8
@@chud327 i miss driveing my 1989 Chevy s10 it was a Gold.
Reminds me of being in the backyards where I grew up.
It was GM town and EVERYONE had their own shop in the yard and garage.
Great video...
Sound like a super nice place! Thanks for watching and for the nice comment!
Nice build. We put a junkyard 400 and turbo 400 in my buddies. It didn't take long and he broke the rear. We got a 14 bolt from the junkyard. Had it narrowed to fit. No issues after that. Even with the 200hp shot of nitrous. It was running a 7.9 in the 1/8 mile.
I love a 400. sounds like a mean machine. Thanks for watching.
Well done on this build sir! I'm looking to start beefing up my 95 s10 with a V8 of my own and this sure was a big help on where to start! Thank you!
Andrew Pastinack you are very welcome, if you have any questions or need advise, I'm just a comment away. And are you going to make a video for us?
Its a possibility. Though the swap won't be for some time now.
Andrew Pastinack no rush, just when ever you get around to it.
This represents america to me. Sweet truck man!
Spencer Hall Thanks for the sweet comment!
@@chud327 to get a chance to see you soon with more s10
@@chud327 s10
@@chud327 s10
@@chud327 s10
I'm not sure exactly how long ago it was but you built a 4x4 s10 blazer and I ended up with it. That was one of the most fun trucks I ever had.
Wow, that is a cool story. I love hearing that you had so much fun with it. I want another 4X4 S-10, my current S-10 is a V8 2 wheel drive. It is fun, but nothing like the 4X4's. What ever happen to it and thanks so much for the update and for watching.
Come to think of it, I had a grey one and a green one. I assume you are talking about the green one. Have you seen the videos of it on my channel? Thanks again.
forgot to tell you Im really impresssed with what you done on your truck at such a apparent low budget,,great work.
snowmangsx1100 Thanks, I almost did another at the beginning of summer. Some guy was selling one in my town. I had an LS motor in it that had been pulled. Everything was there except for an engine and transmission and he only wanted $700. Long story short: It sold before I could get to it...
hey right down the street here from my house a garage has a pretty nice S10 body for sale,,its black with a raised spolier on the hood and aint to bad for 700 Dollars,,Id use it but my truck is much nicer and would make a cuter sleeper,,haha,,I might can get a photo of it and send you later.
Yea, send it. What area are you in?
great footage and editing sounds great too for stock!
Thanks, S-10 and video making are 2 of my passions, it was a joy to make this video. Thanks for watching and for the comment.
could you point to where the video of the next upgrades is i looked through but wasn't sure
If you are talking about that S-10, I actually sold it before I could get to the stuff mentioned at the end of the video. I didn't even want to sell it, but I got a super offer. However, I am constantly looking for my next S-10 project, I hope you will tune in when it happens.
chud327 hey man, I'm building me a truck for my first vehicle. I had a ton of questions to ask you if u don't mind helping me out. Was the transmission Manual? If it is/was what shifter did you use or was it already on the truck? I don't know much about the s10 but do they all have the one legger rearend? And my last question is do I have to relocate the gas tank when I put a muffler on the truck or no? Thanks for you help in advanced.
Sorry, just seeing your questions. 1st - Mine was an automatic, but I used to have a 5 speed blazer with a 4.3. The V8 will bolt right up to where the 4.3 was. The rear ends are most likely going to be one leggers from the factory. If you do dual exhaust on one side, the tank can stay. I have done it both ways, but I prefer to leave the stock tank in the truck. I hope this helps and is not too late, thanks for watching.
I just bought a 86 s10 with a sbc 400..my flywheel is going to need to be replaced soon..but i cant get to the bell housing bolts due to clearance..any advice?
Possibly remove crossmember and lower transmission enough to g t some long extensions up in there. Good luck and thanks for watching. BTW, did you see my latest video? Another complete S-10 build. It just came off t Saturday…
@@chud327 no..BUT IM ABOUT TO WATCH IT! I sent you a link to my S10 on my channel..check it out!
I might be getting an '82 S10, it needs a new engine and God knows what else. It's just as nice to watch the process anywho.
I say grab it, but I have a weakness for them. Did you see my latest s-10 build from about a month ago? Thanks for watching!!
Dem grass burnouts are awesome!🤙🏼
Yes, did you see the dirt burnout from yesterday? You kinda inspired it. Thanks for watching.
@@chud327 😂🤙🏼
NICE LITTLE TRUCK MAN 2 THUMBS UP
Thanks so much, I need to do another... thanks. for watching.
The fart sound made me chuckle. Nice build
Glad to make people laugh.. thanks so much for watching.
Truly admire your channel. I love them little trucks but i like rangers myself but that is a sick s10 in my favorite body style of them
Thanks so much and I love the S-10, I have had over 20 of them... thanks for watching.
I have two s10’s one has a 355 and the other a 396. They both haul ass and are a lot of fun.
Are you near me? I wanna come check them out and make a video...thanks for watching.
You in Alberta?
@@9087125498172345 no, I am way down it Florida. Maybe one day when I start traveling the continent... Thanks for watching.
@@chud327 I love Florida! If i ever end up down there with one of the trucks I'll shoot you a message on here.
I have a 98 factory 5 speed chevy blazer with the 4.3 that I'm gonna be doing a v8 swap to this summer .. For now it's my daily driver lol .. Thank you for your vids I love them !!!!
Herbert Humphrey Thanks for the compliment!!!. Good luck and if you run into any questions during your build, I am only a comment away. What are you going to put in it and are you going to make us a video?
Dammitt Boy!!!!! That's a machine my brother!!!!
Thanks and thanks for watching!
I have an '89 s10 i'm wanting to do a 350 swap to but am clueless about it haha
gonna have to give your videos a good run through several times :) thanks for sharing!
Gary Cifers It is my pleasure and the more time you watch them, the smarter you'll be. Thanks for the comment and good luck. Are you going to make us a video?
chud327 I'll try to as soon as I actually get a plan together haha
Cool, can't wait!
Did you ever do it?
Nice truck
Thanks so much and thanks for watching
Great work
You know your stuff
Big punch in a little package
Thanks so much and it was fun to drive. Thanks for watching.
I just built my 454 I’ve bored it over 30 and put 396 heads and camed the crap out of it but I’m not too sure if I need to get and weld motor mounts or can I use the existing mount holes as well as I’m not too sure which trans to go with to keep it manual
I am not sure, but it sounds like a real beast.
hey a quick tip on bleeding your brakes,,next time your at auto zone buy you a a foot or so of wind shield wiper washer hose or some of the very small gas line that will cup over the end of the bleeder screw and hand to the ground or into a bottle and you can save the mess of it srpaying all over your rear housing and brake dust covers,,also if you can have someone to help you use a short enough piece of hose and let the end go down into a bottle of brake fluid and all you have to do is pump the brakes and release and it will take the air out,,long as the level in the bottle is above the hose it want let air get back in but requires the bottle to be close to the wheel cylinder.
snowmangsx1100 I used to have one that had a short hose and a magnet on it, but I don't know what happened to it. I should make up another and make a video. I am on the edge of bleeding the brakes on my dune buggy project. I'll try to build another bleeder device for that.
This is a worthy build these little truck sail with a V8,speeeeeeed
Yes, they can be really quick with just a little work. Thanks for watching.
Gonna be a couple years till I build one of these bad boys, that way I can spend as much as I please on it. your videos are great.
+ToadNumber55 Hey, thank for watching and for commenting. I just sold mine a few months ago and I already have the fever to build another, I think it is in my blood. I hope some day that I can see a great video of your S-10 with its V8. I suggest that you go ahead and start collecting parts and try to find a nice body. Good luck and thanks again.
I started to put a 327 in a 85 blazer. 25 yrs ago straight out of high school when cruising town was still cool but it didnt end well
Sorry to hear that... Thanks for watching.
Love it I have a 99 s10 I plan on putting a 350 in it any suggestions?
john ward If it is your first time, I would recommend getting the book from jagsthatrun.com. It used to be 19.95, but I was always too cheap to order it. It walks you through step by step. Other than that, take your time and do it the way you want it. I would also suggest that you build us a video of the whole process. Manual or automatic?
As am i. I'm going to try for a 700r4 auto with a 350 maybe a mild cam in it. chevys are not my thing I run dodges so wish me luck lol
Well the S-10 will make you more of a Chevy man or it may make you hate them. Depends on how the build goes. What you described is what I would have done if I were no doing mine on such a tight budget. I went with a cheap 307 and my turbo350 was a left over from a previous project. 350 and 700r4 would have made my build much better! Good luck and feel free to ask me any questions that pop up... Regular cab or extended?
Damm cool project ! real cool ! I should get a rear diff locker as well ! off roading sucks without it !
Thank you so much and yes I love a locker! Thanks for watching.
Child 327
I have a 1991 GMC I like the VW gas tank what year of VW did it come out of.
I am pretty sure it was from a 1969 VW Beetle. Thanks for watching.
this one is my favorite movie of all of them... this is the one I watch daily. I have found the 94-2000 s10 blazer has the tank in the right location for dual exhaust as well as the filler neck is on the drivers side. I am seriously considering that route when the weather gets better and now that I have a job I can afford some of the good things..what are the mufflers that you have on this truck, I like the sound. 69 camero looks good, but I am partial to the 15 inch z28. I have had 4 s10 in my life and all of them get the z28 rims
Wow, you watch it every day, you deserve a big thanks. Have you entered my Swiss Army knife giveaway yet? It would be super nice if a real fan won it. I think all the Blazers had the tank in the back, which is perfect for the dual exhaust. I had Flowmasters, but I don't know what series they were. I have loves S-10 with the Z/28 wheels too, It is a great and inexpensive way to make the truck look so good. I have had, I think, 14 S-10s in my time. That is if I haven't forgotten about one or two... Please keep watching it, that is some of the best news I have heard all day. Definitely the best comment of the day and maybe even the week. I can't wait to get my next S-10 project, I'll be sure to make some videos! BTW, I am working on a video that has some of all my old vehicles, currently there are 10 of my S-10 in that video...
Its nice to you work on something you love, geeat video!! Thanks for Sharing
Yes, i do love working on stuff, do it show in my videos? Thanks
That is a nice engine swap! Looked like got a bit loose on that dirt road on your test drive,lotsa power
It was a big improvement! Have you seen my current V8 S-10 project? I would love to hear what you think.
No I can't subscribe to any thing right now, weak phone , but I'm upgrading soon
Maybe soon then?
That's a pretty cool truck buddy
I agree, I probably shouldn't have sold it. Then again, I am always looking for my next S-10 project. Thanks for watching.
chud327 I like the "rat rod" style
Thanks, have you seen my dune buggy build? It is even more rat rod. Thanks for the reply.
Got my 350 on the stand and a re buildable th 350 trans. Got a couple prospect s-10s I've seen from the road really want one with the bed full of trash!😂
I keep my eyes open for my next s-10 project too. thanks for watching.
You better check the right side axle, wheel wobble pretty serious at 6:45 in video
That was an old tire that I put on the had knots on it. I was much better when I put the BFG's back on it. Thanks for watching and for the comment.
Awesome content
Thanks so much and thanks for watching
nice build, clear video, good job...
Wow, thanks and thanks for watching. I can't wait to get another truck to do another V8 swap with....
i'll watch for it happy holidays!!
Thanks, you too.
This is probably one of your coolest videos. Really impressed!
Wow and thanks, I am glad you liked it!
Hey man ware u got the old school exhaust cutouts from they r awesome
The brother-in-law gave them to me, I don't remember where he found them. I had them on the self for a long time before actually using them too. Thanks for watching.
When they are closed do they leak exhaust into the cab from under the truck?
Or are they pretty air tight once closed?
I'm debating whether I should go with this set up on my 1985 Ford Ranger V8 (302) with a c4 automatic and 8.8 rear end from a explorer.
www.opgi.com/exhaust/header-accessories/cable-operated-exhaust-cutouts8/exhaust-cut-out-cable-operated-mr-gasket-ch24872.html?gclid=CjwKCAjwj6SEBhAOEiwAvFRuKASS02BuK7NUfHr9BKuSP8bKO_7hfYmrKUuHctpT8zbO2Jy8U_IvqRoCVfgQAvD_BwE
Bad ass s10 man! One of the coolest ones ive seen.
One_Clean _s13 I see it as simple, clean, and easy. Thanks for your comment / compliment. Did you see my 9 minute burnout compilation video from this morning?
chud327 sure did! I bet those plates in the ground are covered in rubber haha
If you watch my burn out videos, one has the ground, behind the plates, covered with black snow that is smoking. The kids couldn't figure out what all the black stuff was... Thanks for the comment.
Lol.. Good video.. I did a similar project years ago with a ranger and a 302..
I raced a guy that had put a 302 in a Ranger once, that thing was so fast. It had a stock 302 with little street tire on back, but he knew just how to drive it. That or it had magical power. Thanks for watching and for the comment.
Dude that thing is BADASS!! NIce Build
Thanks, glad you liked it.
well I haven't made any videos on this build but I wish I did.. it came out pretty smooth...and im with u on tha burnouts lol ant nothing like smelling some burnt rubber...u got some kool vids to bro good job
Luis Marquez Thanks for watching and for the sweet comment, let me know as soon as you make a tire smoke video, I'd like to see your build.
Awesome video and Insane Build.
+nick c Wow thanks, I have a bunch of these S-10 videos. I am glad you liked it. I am looking for my next S-10 V8 build for when my current project (my tiny house project) is finished. Thanks for watching.
Thanks for responding Chud, im currently gathering parts for an upcoming s10 v8 swap of my own. I watched two of your videos so far and they helped out a ton already.
Well feel free to watch all that you want and if you come up with any question, please ask.
Why I can't have a neighbor like this man good spit
Coupes Inhardtops yea ikr lol
Thanks and thanks for watching.
gotta love a nice coupe
wicked build man
Thanks and thanks for watching. I can't wait to find another S-10 body for my next build.
you still got it?
should do a extended cab s10 lol
I sold it, got an offer I couldn't refuse. i would love to an extended cab next time. Thanks fir the reply.
Nice it would have ben Esser to put the cam intake and carb on when the engine was out y dont you put a new manifold on to
Good point, I will try that next time. Thanks for watching.
Im thinking about doing a project like this and was wondering if I could do it for 2 grand? just to get it driveable and than I'll put more money into it every couple weeks when I get paid
+Gavin Cayan There are a lot of variables that you have to know. Do you already have a truck? Do you already have the V8 engine? If you have either, you should be able to do it for 2K. Summitracing.com sells V8 swap kits for $500 - $600 and they have pretty much every thing you need but a radiator. If you look on Craigslist you can probably find an engine for $500. Did your truck come with the 4.3, if so you can use the stock transmission. If not you are going to need 2 or 3 hundred to get you a trans. Like you said, 2K could probably get it running and then put more money into it every couple of weeks to finish it up. I would think it would work. I want to see some videos when you get it done.
chud327 I'm picking up an s10 for 250$ and I can pick up an engine and transmission for about 600$ Unfortunately it was just a four cylinder but I'm going to buy mostly used parts. The only thing I'm buying new is the V8 mounts
If you can buy most stuff used you may be able to stay under the 2K. $250 for an S-10, can you find me a couple? Keep me updated on your progress!
Awsome budget build!
Thanks, I will never be able to do another that cheap. Thanks for watching.
Great Job!
Thanks so much and thanks for watching.
How did you like this engine as a daily?
I never drove it as a daily, sold it too quick, but those are great engines... thanks for watching.
next time you bleed your brakes use a piece of windshield washer rubber hose and push over the bleed screw and let the hose hang down into a bucket on the floor so you want squirt fluid all over your pretty painted work,,Rick
I have used the self bleeder like that but i don't have one. I could build one, but I guess I am too lazy for that, maybe next time. Thanks for watching.
What exact gas tank did you use because I'd like to do the same setup? Not a fan of a fuel cell on a street vehicle. I have the engine and trans already in, but I plan on adding vortec heads and a bigger cam soon, as well as a Edelbrock carb, the holley is fouling my plugs and giving me terrible gas milage on a stock 307. Thanks for the video and it was entertaining to watch.
I used a 1969 VW Beetle gas tank, but if I could go back, I would use the stock tank. It has the electric fuel pump and the gauge sending unit. It sounds like yours in going to be really sweet, do you have videos of it yet? thanks for watching.
I'll be watching all the videos soon Thanks
Nice, please do. thanks again.
Chud, i'm not old enough to drive yet, but am strongly considering an S10. I have three questions. 1. How much did the whole project cost? The only thing I don't like about the truck is the 4 cylinder engine. 2. Was the effort worth it? 3. Was any fabricating or metal work done to fit the V8? I know the truck is little and probably doesn't need a large engine. But it's just so much cooler in my opinion. Thanks for a reply.
Brody Tunnell I've had S-10 with 4, 6, and 8 cylinders. If the original engine runs fine, I would change it. The 4 cylinder is not as cool as a V8, but it is much better on gas. The last truck I built had a blown up engine when I bought it. It was 2 truck bodies and a bunch of parts for $200. I could not turn that down. Then the build only cost me $600 just because I had a bunch of the part in my garage left over from other project. If you had nothing, it would probably take $3-5000. That is depending on how much you do to it and how nice it is, some people spend over $10,000, but I am not one of those people. To fit the V8in the S-10 all you need are special motor mounts and they are $69-$99, depending on which engine the truck came with. Then you'll bolt everything else on. It was worth the effort to my because I love working on stuff. And no the small truck doesn't need a V8, but it sure is nice, fun, cool, sound good, easy to work on, fast, great resale value, etc... If you don't want to do all the work, get one with the 4.3 V6. The Vortex 4.3's are a great engine. They last for ever and can be really fast. Or do what I did with my first V8 S-10. Some guy did all the work for me and then he got tired of the truck. I traded my stock 4X4 Chevy for his V8 S-10 plus he paid me $17,000. Now my truck was much newer and nicer, but I was selling it anyway. Hope this helps and start working on it now for when you turn driving age...
What transmission did you go with I’m fixing to start my build the truck was originally 2.2 5speed would love to stick with a 5 speed but just wondering what transmission would be the best for my application
I went with a turbo350, just because they are abundant and cheaper to find. I would rather have a 700r4 or even a new model auto. I love the idea of putting the 5 speed in one too. Good luck and thanks for watching.
Nice Chevy bro!
Thanks and thanks for watching!
Hello how long did it take this for you to do ? i am going to do the same thing with my s10
This took me a year or two, but I was in no rush. I was trying to do it as cheap as possible buying everything used off of craigslist. You can do it much faster if you want to buy some new stuff. thanks for watching and good luck with your build.
And did you have any problems with the steering colum with the egzost manifold. And is your s10 a 1st gen
I had a header that the steering column went through. thanks for the reply.
Looking good there buddy! I've heard a mixed bag of results on the air gap intake but am anxious to see your "seat of the pants" upgrades on the S10 and how it improves power and performance.
I went looking for that intake at the Daytona car show and found it. I had that it on my old 400 and I loved it. Thanks for the comment and I can't wait to see the upgrades too.
Did you use the stock wiring harness and if you did and you explain what wires you kept and which ones you didn't use
I didn't use the stock wiring, I ran a hot wire to the distributor to run it. The key only worked the starter on this one. Good luck and thanks for watching.
There's another easy way to check to see if a rear axle is open or posi is by jacking the rear end up so the tires r off the ground, put in neutral and spin one of the tires by hand, if they both turn the same way its posi, and if they turn separate ways it's open... And u mite wanna put a different air cleaner on cuz that stock one will cost u horsepower... Just a couple tips that mite u or others... Thanks for showing your build, looks like a fun little truck
Good tip on the open vs. posi. As for the air filter, that little 307 wasn't really for power. It was just a cheap, good on gas, sounds good, getting it running engine. Maybe next time, we will get into some power. Thanks for watching.
Have you ever seen the show Engine Masters on the motor trend channel here on UA-cam? If haven't you should check it out... They test all different High Performance parts on a dyno to give you real horsepower gains or losses...
Leave it n park if u can't turn the tires it's posi of one turns the the other turns the oposite way it's open
I was looking at those earlier 2000’s 4.3 V8s so durable on the F150s and wondering if it would fit in a S10, my favorite truck.
I love the little S-10's too. I have had around 20-21 of them. Thanks for watching.
A 4.3 v8 does exist in the mid 90s it was deemed the mini lt1 motor as far as one being in an f150 by ford idk and that would be a crime to put a ford motor in a Chevy anyway lol but the chevy _4.3 v8 is not bad it's like a 305 just with reverse cooling and fuel injection lol
6:42 wonder why the right wheel wobbled a bit?. Could have been bent.
I am pretty sure what you are talking about, the tires were old and had knots on them.. thanks for watching.
HAHAHA AWESOME stuff Love the desk chair at the gate.
Funny and thanks so much for watching.
Just snagged an 89 myself looking at swapping to a 350. Any and it all info is welcome! Currently the truck has the 2.5 Iron duke
mine was an 88 with a 2.5, it was a fun project. Good luck and thanks for watching.
15 " camaro look hot
I am about to do another, it has the 15 inch Camaro wheels currently on it, but I have a 16 inch too... we will see what it winds up with and thanks for watching.
Super impressed with the swap! I was just wondering what you did for a fuel system? Did you keep the return system or make it a returnless, also what was that fuel tank out of? Thanks!
Thanks and the fuel system was returnless. I used a tank out of an old VW beetle. Next time I plan to keep the stock tank with a pressure regulator and return, that is what I did on a V8 Blazer I did and it worked so great. Thanks for watching.
Nice ride!!! I just bought a 91 2.8 5spd reg. cab w/short bed. perfect body, original patina powder blue color...... all works and complete ! $200.oo.
6/12/19. and it begins! just sayin
I am jealous! Thanks for watching.
Try to find a LS
Excellent work.
+evilcowboy Thanks, I am glad you liked it!
that is dope man great video and great truck ,I bought me a 91 s10 and I'm swapping a L's motor 5.3 vortex , and you just help me a lot when it comes down to the drive shaft and rear end thank man 👌👌
Sweet, I want to see some burnouts when you get finished. Thanks for watching!
Nice vice!
where can I get one
I just found one on marketplace for $500, that video should be out soon and thanks for watching.
Looking to swap my 91 4x4 ext cab and 'm deciding between just getting a tbi 350 and carbing it or taking on the possible headache of an ls. I am leaning more towards old school but not sure where to start and if some things that are already in truck will work and line up or not. Any thoughts be great, thanks! Love the video by the way, better than the others I watched
I have already done or had 3 old school V8's. I hope to do a LS next time, if I ever do another. They are more expensive to start with, but in the long run, I believe it would be less expensive to own and operate. The LS's have a ton of power too... If you want to build one on a budget, I would probably go with a old school... Either way, would work for me. Keep me up to date on what you do and thanks for watching.
Did u have to change rear end
I don’t have to, but I found one with a better ratio and it had a locker. Thanks for watching
Did the 3:42 rear end drop your highway mph and rpm? And by how much? My 3:73 and turbo 350 scream 3000 r.p.m. at 55. And what gear locker set and part numbers please! Also I seen your motor mount plates were cut and you used the top hole, so did you have any issues with that being lowered into the frame? Like hitting the oil pan or fuel pump? I just drilled out my mount holes and it gave me 1/2 inch more clearance for my headers and stuff just didn't wanna go to low to sit the oil pan on the frame. Man you're a top mechanical engineer!
I never got mine on the highway enough to test it, some one bought it before I got tag and insurance on it. However, when I went to 3.42, that was high than what it came with. It should have raised top speed and lowered rpm's. I don't know the locker numbers, it came in the rear end when I bought it. I know it was made by Richmond. I had no issues with oil pan, fuel pump, exhaust, or anything hitting. Thanks so much for watching and I hope this helps.
hey chud next build check out titans engines. there out of ocala there prices are unbeatable and i seen on your vid u bought that rear end from jaxonville lol i live close to there
Love the tip, I love unbeatable prices. I kinda have the fever to do another, but I have to find a body first. Your name sounds familiar, do we know each other of have we talked on here before? Thanks for watching.
chud327 i dont think we have but i thought you looked familiar and im about to do a similar build thanks to your inspiration
How did the wiring go? You never covered that great video other than that !
I had a switched hot wire that ran to the distributor and the key switch ran the starter. That was pretty much it, sorry I didn't cover that better. What are you building and thanks for watching.
chud327 I want to do a v8 swapped 92 s10 like what you did
I have the fever to do another myself... I just have to find a reasonable S-10 body, in good shape, first! Keep me updated on your progress...
Nice job!
Thanks and thanks for watching.
Looks like excellent work to me. What state are you in, or do you only work on your own vehicles?
I am in Florida, where are you located? I would love to find someone that wants to finance the build and pay a some for labor. That would also be an excellent opportunity to build another couple of videos... Thanks for watching.
I have a 91 4.3 sonoma that I'm looking to do a 350 swap in. Did you have to do anything with the wiring harness and stuff like that?
CrackpotPuma I didn't use the wiring harness on this build. I ran a hot wire to my distributor and I had a push button for the starter. I left all the original wires and was going to hook up the ignition and gauges and whatnot, but I sold the truck before I got to it. On my V8 in a 4X4 S-10 Blazer, I had the key to start it and all of the gauges in the dash worked. I just depends on how much time you spend on putting it together. I recommend have every thing work like stock. Please ask any other questions and make us a build video. Hope this helped.
+chud327 Helped a lot thanks man!
Are you making us a video of your build or are you just going to do us a burnout when you are finished?
chud327 I'll try and do both!
Perfect thanks, what plans / parts do you have so far?
yeah im actually in the process of a 350 s10 swap right now just need the radiator and the mufflers and itl be ready for tags and inspection thanks for replying ....
Luis Marquez Have you made us any videos of it yet? Let me know when I can see it, hear it, and watch that burnout... Thanks for the comment.
thanks for making the video. I like the dual exhaust idea you had and moving the gas tank. I know you said it was a VW tank, but what vehicle model and year did it come from? thanks for taking the time to share what you learned. id like to do the gas tank swap to mine when I do the v8 swap next month.
Thanks you so much, I love making videos. As for the tank, I used a VW Beetle tank. The year of the bug is unknown, but it has to be one from a 1969 to about a 1972, those are the year bugs I had. However, I had a Blazer tank that I could have used. It would probably have worked better because of the electric fuel pump. Keep me updated on how you build is going and be sure to ask if you have any questions.
thanks for the info. never thought id get a reply this fast! great job!!
Next it will not be that fast, I just happened to see it 5 minutes after you posted it. Thanks for the fast reply, I usually do not ever get those...
@@chud327 I got a 91 4.3 sonoma automatic, regular cab. Wanting to put in a v8. Can I keep factory frame mounts and is transmission mount going to need moved? Also, what is a good posi rear end that would bolt right up in mine? Mine is 308 open wheel.... Wanting a posi... I just realized this thread is 8yrs old. Lol, hope this message finds you doing well and I hear from you soon. Thanks
@@JoeJones-qg3de I think you can use the 4.3 mounts and the trans mount might work too. Just double check some how I could be wrong. I had a Camaro posi in one of mi e, but the should be other factory ones that work. I had a newer blazer with a factory locker, you might just change the whole rear end out. 8 years don’t matter, S-10s are still my weakness. Just put out a LT1swapped S-10 a little over a year ago, hope you will check that video out too.
where did you get the headers from ANd how much were they?
I actually found the headers on craigslist for $20, that was probably a once in a life time... good luck and thanks for watching.
Hey I'm almost finished but how do you have your alternator wired mine won't seem to charge the battery and I got the alternator checked and it's fine
Mine was a one wire alternator, you just run the wire from the alternator to the positive battery post. If your's in not a one wire, I don't know how to tell you to do it. Good luck.
hi! I'm conrad and I'm working on an s-10 84 4x4 truck that was my dads so i am doing a v-8 conversion. and the 350 engine is out of my 1979 chevy 1/2 ton that i am going to restore too as well following my s-10 v-8 conversion any thoughts on the build
i like the s-10 video , so i have one
drew kel
I tell you what chud327 I watched your videos 100 times over doing my first engine swap unfortunately I blew that engine shortly after completing the swap that was my first ever engine swap on my first vehicle its 6 years later and now I’m putting a 383 stroker with a T56 transmission in my 87 BMW You taught me a lot check out my channel!
Sorry to hear you blew your engine, but very glad to hear you are doing the 383, I have always wanted one of those... Loved the 100 times part and have you seen my latest S-10 V8 swap Z/28 budget build. I make my old one look bad and has really gotten great views and feedback. I would love to hear what you think and feel free to watch it 20 times. Maybe not 100 because it is 44 minutes long. Thanks for the update and planning to check you channel out now.
How easy was the trans to put in?
Not bad at all, thanks for watching.
Nice build. What transmission did you use? Also I converted mine to disk brakes but they have no stopping power. I wanted to know if you had any idea why.
I used a turbo350, but would rather have had a 700r4. I don't know about your breaks, maybe bad booster, no vacuum, wrong proportioning valve... good luck and thanks for watching.
Badass I'm getting another truck and it's a square body s10 and I really want to do this
Just seeing you comment. I am almost finished with my next square body, hopefully better than all my others. Video should be out in a month or so, hope you will check it out.
Did you have power steering on this truck??
yes, If I remember correctly, it had power steering. thanks for watching and good luck on your build.
awesome video I'm trying to do a 5.7 vortec swap in an s10 with my son
Sounds like a perfect father and son project. I have a ton of S-10 V8 video with more details than this one if you need to see how I did pretty much any step. Good luck and I would like to see it when you get it going.
chud327 I'm going to make a video as well
Please let me know when the first episode is out. Thanks!
Nice exhuasts, thatll work I like your style
Thanks so much and thanks for watching. BTW, have you seen my latest s-10 V8? It is my first extended cab...
Well done sir.👍
Thanks so much! Thanks for watching.
chud327 I'm in in the process of tricking out a 1998 GMC Sonoma. It's gonna look badass after I'm done.
Sounds nice!
At 6:43 it looks like your RR wheel may be bent. Sumthin's wobbly.
Those were super old GoodYear Gatorback and they had knots on them, at least, the RR one did.... Thanks for watching.
Good job!
Thanks and thanks for watching.
Damn good job man
Thanks, I am so ready to do another. Thanks for watching.
Did you have any issue with fitment of the headers and interference from the starter?
I don't remember any issues. If you buy ones that are made for the conversion, they should go pretty great. good luck and thanks for watching.
Nice work and dude u got skills😎
Thanks, that was a fun project. I really should do another. Thanks for watching.
Hey bud what tranny did you put in. I am rebuilding one now. What shifter was that
I believe it was a power fluids, but I have had so many… I would prefer a 700r4. The shifter, I think, was a hurst quarter stick. Good luck and thanks for watching.
So what’s the best rear end i can get for my s10 1991 2.5. Been struggling to figure shit like this out, u give out pretty great advice
I would guess, and hopefully Chevy guys won't hate me for saying this, a narrowed Ford 9". They are strong and super easy to change the gears. I had one, but sold it with my old Camaro... I hope this helps and thanks for watching. BTW, I am a Chevy guy myself...
Curry makes a complete bolt in 9 in kit that is four link costs about $1000. Well worth it
Hea Chud. I just seen this video. What did you get your locker out of. I like them, kinda weird the first time you feel one out lock in and out in the corners. Great video man, yeah..like I mentioned in the other video, I'm looking for a posi swap for that 93. So, I can't believe you sold it after all that wrenching. On to the next project, I guess. Oh, your motor mounts, who makes them? Thanks Chud, Goose.
+PantyPirate OK Goose, don't rub it in that I sold it. Just like pretty much everything else I sell, I start regretting it as it is going down the driveway for the last time. That locker was a richmond that someone else had installed and I got the whole rear end for the low price of $150. I thought it must have been broke, but I risked it and loved it. And you're right, on to the next project. Right now I am build a tiny house, have you seen that series yet? But I am keeping my eyes open for my next S-10 project. I love those little trucks! The motor mounts came out of a parts Blazer that a friend gave me, I don't know who makes them. You can find them on summitracing.com, jeg.com, jagsthatrun.org, etc. I had a different S-10 with a V8 that I picked up from my neighbor through some trading. He put a posi rear end chunk out of some Camaro or Firebird. He did it himself, I have never done a rear end before. I think I have already deleted that video, it was old and poor quality. Thanks again and let me know when you get it done.
+chud327 , thanks friend. I will get to your tiny house video's. I will keep you posted on the progress, that's so funny Chud, cause I haven't done a rear end yet either, but I see it happening pretty soon. I know, I'll get a Camera on it. It's pretty easy to figure stuff out with youtube. If you don't break new ground, how do you know you can't do it. Never be afraid to fail, cause that just means you had the courage to face new challenges.
+PantyPirate Amen to youtube being able to teach you. I am always looking stuff up on here. If you do fail, you will learn something and you can try again. Yes, keep me updated!
What size blocks did you put in rear to get it level?
Great question, those were 3 inch blocks. thanks for watching.
What size holesaw did you use for the frame and did you have any issues with the fuel lines?
+Justus Smith going from memory, I believe it was a 1.5 inch. and no issues with the lines. Are you doing a v8 swap too?
was putting a 4.3 in my s10, but decided to turbo the 2.8 after the bottom end is rebuilt. I was using a 1-1/4 holesaw and the frame chewed the teeth up everytime.
Might need to by a good quality hole saw and I squirted a little oil on it. Good luck and let me know when you have success. I want to see the turbo 2.8.