Anyways, heres how to start a 737-800 1. Turn on the Main Battery. 2. Select either of the Left Main fuel pump switches to the "ON" position. 3. Select the APU switch to the "START" position. Monitor the APU Exhaust Gas Temperature gauge for stabilization. 4. With the APU fully powered up, select the APU Bleed switch to the "ON" position to provide pneumatic air to the bleed system. 5. Select the Isolation Valve switch to the "ON" position. This will open the pneumatic duct for APU Bleed-air to the Engine 2 start valve. 6. Turn on any of the Right Side Fuel pumps. 7. Close the overhead, and select "Shift + 4" to call up the throttle stack. 8. Select the Eng2 starter knob to the "Ground" position. Start valve Open light will illuminate for Eng2. 8. Monitor Eng2 N2 (make sure the secondary engine indications are visible). At around 19-20% N2, turn on the right side engine valve to the "IDLE" position. 9. Open the overhead again, and turn the Isolation valve to the "OFF" position. 10. Right side fuel is already selected for the APU. 11. Close the overhead. 12. Select the Eng1 starter knob to the "Ground" position. Start Valve Open light will illuminate for Eng1. 13. Monitor Eng1 N2. At around 19-20% N2, turn on the left side engine valve to the "IDLE" position. 14. Turn the APU Bleed Valve to the "OFF" position. 15. With both engines running, you may now turn the APU off by selecting the "OFF" position of the APU switch. 16. Turn on both Eng1 and Eng2 Bleed air valves and select packs on if desired. 17. Select the fuel pumps to your desired tank. The center tank is used first in most all conditions. 18. Turn on both Eng1 and Eng2 Hydraulic switches. 19. Turn Flight Control switches on, and when needed, turn on Spoilers switches. Yaw damper as necessary. If only Likes were subs😕
Bros smile makes my day ❤️
Bro You 🏳️🌈?
@@Mohammad33rbro you okay?
@@Mohammad33rnot everything is sexualized
@@Mohammad33rreported
@@Mohammad33rYou good?
He looks so good with facial hair
Exactly
Bro is getting finer and finer in every video 😩
Frr
Brrbrorbrostuf
Er what the sigma
Fr
@@g.g.d.e💀💀💀
First reason i follow this chanel is his smile😊
❤ me gustan tus recetas muy saludables
Muy saludables?
@@user-cc7tg3ry8v un poco sera XD
His smile ❤❤🥰
Bros trying to feed us at the end of the short 😂
I swear to god this song is every where😭
ابو الجيس😂😂😂😂
ها منو عربي ودخل للتعليقات وشاف كلهم اجانبب حطوا لايج😂✨️💗
انا او اني ❤❤❤😂😂😂
شو هذا
😂😂😂😂😂 اجه الصيف واجه وياه
شو هذا
اي 😂😂
*_He needs to come out with his own pre-post workout line!! I’ve never seen recipes like this before!!_* ❤
He looks like the real life “Flynn” from the ‘Tangled’ animated movie.
Bros jawline can cut through titanium 💀
jawline sharper than high pressure water gah damn
That looks good👍
Not me thinking he was gonna add fried chicken after the kool-aid 💀💀💀
I LOVE BOLIS THEY TASTE SOOOOOOO GOOD
Haven't seen his videos for months and bro got a crazy diamond jawline 😲
Dude that looks so good everything you make looks amazing
❤ muy saludables recetas.
Every video you make gets better this is to satisfyingly 😫👌
Respect for not wasting any of the watermelon 🫡
Bro fr had a glow ip w/ that bread
Me encantan tus videos!
Bro seems like that one dad to let you have one thing from the store. In a good way.
É simplesmente incrível o que eles fazem com uma melancia 🤩
Its crazy how shaved him and goatee him look like brothers not the same person 😂
Anyways, heres how to start a 737-800
1. Turn on the Main Battery.
2. Select either of the Left Main fuel pump switches to the "ON" position.
3. Select the APU switch to the "START" position. Monitor the APU Exhaust Gas Temperature gauge for stabilization.
4. With the APU fully powered up, select the APU Bleed switch to the "ON" position to provide pneumatic air to the bleed system.
5. Select the Isolation Valve switch to the "ON" position. This will open the pneumatic duct for APU Bleed-air to the Engine 2 start valve.
6. Turn on any of the Right Side Fuel pumps.
7. Close the overhead, and select "Shift + 4" to call up the throttle stack.
8. Select the Eng2 starter knob to the "Ground" position. Start valve Open light will illuminate for Eng2.
8. Monitor Eng2 N2 (make sure the secondary engine indications are visible). At around 19-20% N2, turn on the right side engine valve to the "IDLE" position.
9. Open the overhead again, and turn the Isolation valve to the "OFF" position.
10. Right side fuel is already selected for the APU.
11. Close the overhead.
12. Select the Eng1 starter knob to the "Ground" position. Start Valve Open light will illuminate for Eng1.
13. Monitor Eng1 N2. At around 19-20% N2, turn on the left side engine valve to the "IDLE" position.
14. Turn the APU Bleed Valve to the "OFF" position.
15. With both engines running, you may now turn the APU off by selecting the "OFF" position of the APU switch.
16. Turn on both Eng1 and Eng2 Bleed air valves and select packs on if desired.
17. Select the fuel pumps to your desired tank. The center tank is used first in most all conditions.
18. Turn on both Eng1 and Eng2 Hydraulic switches.
19. Turn Flight Control switches on, and when needed, turn on Spoilers switches. Yaw damper as necessary.
If only Likes were subs😕
Thankyou i really needed this
We love you!
every single time I focus on his face more than the video itself 💀!!
Bro i love your mind and ur taste 😂💖
Him & his mom always have the best songs❤❤ always❤
Bro is in love with big things 💀😭
Like it brother
Yes please 😊❤yes…yes please yep yes yes pleeease yes❤
笑顔が可愛いね (*˘︶˘*).｡*♡
This is very cool
First comment❤🎉🎉
from Bro to Don ❤❤❤ love that goate
Your face hear looks so good! Leave it like this, its looking soo sick!😮
Bro spends more time on his pre workout snack than the actual workout 😂
Apel des day delisius woque tis nou Teresa crrit y love yis🥰😍
❤❤😘😘我喜歡💕
Cute and talented 😮 let's get married 😊
O cara é o estereótipo de top hetero
Thanks for not wasting the rands❤
Damn, but that's what, but I didn't expect to see a beard on him😂
🔥🔥🔥🔥🔥 to every part of the video
Congart davers🎉 my first watch to your video you're subs is 40k now you reach 1M🎉🎉
Beautiful man
Bro loves pre workout watermelon
Bro is the true sigma😂
I ❤ your smile.. 😘
❤
I love ice pops😋😋😋🤗🤗
🔥🔥🔥🖤🖤🖤 gorgeous
BRO IS IN LOVE WITH BIG THINGS 💀😭
Sure does love watermelon 🍉
En mi pueblo se dice boli ❤
*tambien en mi estado se le llama boli*
my smile faded when I saw that grater
Wow 🤩 his trying hard he spend hours and hours his legend
Last part was so nice
Love watermelon s
Eu amo geladinho, sacolé, flaw, chup-chup, lilo. Como eu amo ❤️
Godspeed to cook with brother 😂
Famoso geladinho/sacolé/chup-chup 🇧🇷
They look really good, you add Tajin to them?
おいしそ~😋❤
Bro needs to put that pre workout 😂😂
Pls like it
Ele e lindo 😍😍
Good quality watermelon..
I love the mustash😮😮
Gringo acabou de descobrir o geladinho
Bro great food aside what’s the hair routine 😂
Sanji from one piece in reality 😂
Does this guy ever run out of watermelons??
We call this "chuskee" in India. It gives nostalgic feelings of childhood.
YES SIRRRRRR
Is it only me, but that white part of the watermelon makes my tummy hurt😢😢😢
Bruh, make the business, seal it!
Estas bonito amigo
إذا قمت بترجمة التعليق ضع لايك
Yoooo I got the same grater
That is the juiciest watermelon I have ever seen
second holisss
I call that ice candy
People who like watermelon
👇
In the Philippines we call that ice candy
Good
جالب بود 😊😊
بتحكي عربي ولا فارسي
Good.
I made them bro they slappppppp
You always look handsome in clean shaven
New kitchen?😮
Can we please get one video without protein powder
He from El Salvador I bet 🤌🏻
I need that
He looks like Gustavo from Snow fall
Geladinho!!! Ohhhhhh MAAAAAA GAAAAAH
😋😋 top
😂😂😂 scunklotes a $20 ... ni pensaba que era la cáscara de la sandia 😂😂😂😂