I was convinced that you only need 1 subwoofer, so I did a lot of investigating on info of having 2 subs. I decided to order another one same make and model. WOW, adding the 2nd one really improved the overall sound of my system. I WILL NEVER GO BACK TO ONLY 1 SUB.!!!!!
OHM A's and F's are fantastic speakers. Heard the A's when they came out in the 70's and the F's later. Tempted to buy a pair, but don't think they would go well we my Khorns.
Great video. I am running KEF LS50s with a single REL T5i in a small room and very happy with the result. To make myself even more happier I am looking to buy a second sub. The reason you’d want two subs is not stereo sound, but to get your frequency response as flat as possible. Flat response is almost impossible to achieve with a single sub in a typical room. You will have peaks and dips, meaning that at some frequencies your sub will sound louder and at some - quieter. The differences in loudness between frequencies can be as big +-10-20db, so it is very noticeable.Those peaks and dips depend on the positioning of the sub in the room, so when you have two subs located in opposite sides of the room their frequency graphs will blend together and provide much more natural and balanced bass.
I find by having dual subs the integration being a whole lot smoother/easier, it's probably because i have two Rel 8" down-firing T5is positioned behind the couch, which are 6"-8" away from the corners and having them both connected to each individual stereo speaker binding posts (high level input) The biggest compliment I get is when a guest/friend ask.... "how come you get such a huge sound from at such a small speaker" 😁
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
I have several pairs of speakers setup in a modest arc in my listening room combined with one subwoofer for one of my systems. I have found toe in tuning of both the speakers and the sub enhances the overall balance of sound. For my surround system I have a separate 15” sub in a corner location and sitting on a large marble tile to aid in dispersion. For testing I have used demo frequency response disk and my favorite bass recording is Leo Lyon’s recording of “Faro” from Ten Years After Stonedhedge. It features several bass guitars together across the soundstage. Enjoy!
I got the T5i and it was the Best thing I've done. When I've turned the sub off of a night sometimes I forget the next day and put sounds on and it sounds thin, I nearly had a panic attack until I realised 🙃! 😎
Hey! I never comment videos on youtube but I'm glad I did it so you changed your mind on subs. Glad you saw the links I sent you too, Paul McGowan is indeed very good at teaching all his knowledge. So again, I'm really happy you get one and experimented with it, although I have one comment to make (who doesn't?): You say that you don't need a sub if your speakers go bellow 20hz, and I am not comfortable with that idea. As I told you, and you surely saw it on McGowan's video, a servo sub is not all about low frequencies, but helping the mids too, because it is servo-controlled. If your passive speakers go to let say 18hz, it will not be as good and clean as a 18hz servo-sub (because it is servo-controlled (inertia etc...)). So a sub is not only for low frequencies but for mids as well. It can do wonders on voices for exemple (but I'm sure you have experience it by now). Apart from that I'm really glad you changed your mind and get one. I have to say I don't own one (just changed my speakers and amp so it has to wait a bit), but I heard what it can do. I continue to watch all you videos and I'm glad someone like you is out there teaching new members of our community. I'd also be glad to communicate and exchange ideas and experience with you, if you're interested of course. Send me a message and I'll give you my mail, facebook or whatever. Keep doing what you do, you're doing a great job!
Hi Joseph! Yes, yours and other comments as I said got me thinking. Its the same principle of the supertweeters. Yes, of course, lower frequencies develop the midrange but also a part of the upper frequencies. But that is not a special feature of subs. Even a loudspeaker with good, deep bass, will obviously do the job and even better. Subs are necessary only when your loudspeakers are inefficient in the lower register. Just like supertweeters for the highs.
I wish they had these subwoofers back in the 1980's! I bought an inexpensive downfiring Acoustic Audio PSW-10 subwoofer and what a difference it made matched with my old B&W DM11's. Changed my world! Picking a subwoofer is totally subjective. I like to feel it so I picked a down firing subwoofer. You gave some good advice thanks for sharing :)
Good video my man. Thank you! I got myself rel t5i subwoofer and it was the best purchase I made in a long time. The bass was tight and fast comparing to my old $300 subwoofer. Like you said better wait and get the right sub than waste on the cheap one.
I'm sure you were impressed just as much as I was when we first experienced our Rels. If you to purchase another one not only would you find the integration a whole lot smoother/easier but you would finally realise what your room sounds like at its full low-end potential! In fact I was just as impressed as with my first as with the second!!!
I find by having dual subs the integration being a whole lot smoother/easier, it's probably because i have two Rel 8" down-firing T5is positioned behind the couch, which are 6"-8" away from the corners and having them both connected to each individual stereo speaker binding posts (high level input) The biggest compliment I get is when a guest/friend ask.... "how come you get such a huge sound from at such a small speaker" 😁
Another point to consider on wether or not, is what size speakers your system has, my system is made up of bookshelf speakers that simply dont have the bass capacity of say a tower speaker, so my sub compliments the smallet bookshelf speaker. Very informitive video by the way.
You covered all the basis here I have used both Rel and Vandersteen both hook up to the amplifier and I have owned both. My current Vandersteen speakers have subs built in. Good advise here, keep it coming.
My Polk T15 speakers supposedly cover the whole range. Obviously they don’t. I added a Yamaha 8” sub and wow. Now that’s my modest but really full range (for the price point, I mean) hi-fi system, and I’m happy with it (for now) 😉
Excellent video Sir! As an adjunct to your thoughts... I use a single REL SHO-5 with my system and have recently moved to a large home in Washington from a townhome in California. I have not had the opportunity to unpack my sub yet. I've also been moving my system around the main room and finally found the best room placement for the "whole" system... Part of the change was also going from a concrete foundation in CA to a wooden elevated foundation in WA. Other issues include cathedral ceilings (16 ft) and these new combined rooms (Living room, kitchen and non-formal dining area all together) present BIG challenges for us audiophiles to tackle (reverb, echo, huge space to fill with sound, delayed rear reflections, smearing, large windows, hard surfaces everywhere, flexible wood foundation/flooring). So, long story short... I'm getting closer to finishing my system, but noticed immediately that the life/fullness of the music has diminished greatly without my sub in the system! It's one of those things that once you experience it, you just can't be satisfied with less. So, that is one of my weekend projects. To get the life back in my music. On another note, I found that moving my system to a different wall greatly improved the system resistance to the echo and reverb (probably because the rear boundary is now not just a flat wall and I am now parallel with the cathedral ceiling and equidistant from the side walls. It is tough to place a system in a weirdly proportioned room! I had to take over the non-formal dining area for my right speaker... (yes, Bachelor. But would give it up for the right woman! Hahaha... only the right speaker area of course!). Also, buying area rugs throughout and will look into sound absorption to tame reverb/echoes. [I have a nice system consisting of Focal 1038BE II Main speakers (Very good, but I want better someday), REL SHO-5 sub x 1( Excellent, and I can't afford 2 yet.) Primaluna Dailogue HP Integrated Amp (Beautiful and powerful sound...) with PS Audio DirectStream DAC (Wonderful!!) and CD Player (Amazing) and Phono PreAmp (very good). Blusound Node 2i streamer (great for the money). I also have an Oracle Audio Origins Turn Table (good sound, but clunky ergonomics of usage and very susceptible to outside vibration) and SoundSmith cartridge (Amazing!!).All cabling is DH Labs (Excellent value proposition... 30%the cost for 95%the performance.!) Cables DO make a huge difference!! I did A/B/C comparisons with my system above and it was immediate and HUGE!! Tested Streetwires (car audio- my beginnings are High end Car Audio) 12g OFC Ultra Speaker Cable (Very good basic cable, Bulk=$500 for 250ft.) vs Nordost Heimdall 2 (Excellent silver plated lower high range cable, $2400 for 3 meter pair) vs DH Labs Q-10 Signature (Excellent Long grained Copper Silver plated cables within excellent value proposition! $850 for a 3 meter pair) The Nordost was night and day to the Streetwires and better than the DH Labs, but not by much! Differences included definition, clarity, presence, soundstage, Frequency response (slight upper frequency roll-off with the Streetwires. None for the others (due to the better conductor material my guess). Yes, Silver conductors make significant differences. Try Stinger 9000 series car audio Interconnects (
@Brian Shoemaker Hi there! Thanks for taking the time to explain all of this. Sorry for my late asnwer. I just can say...what a fabulous system you have there! Truly amazing! I haven't decalred this yet on the channel but I got your same amp and it is truly outstanding. I would love to put my hands on those PS audio streamers...wow! Considering your question and your gear, maybe the loudspeakers could be upgraded...but seriously, both Focal and Oracle audio TT are excellent pieaces of gear. Let me know if you change your speakers...I am going to do that in the future...
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. Now go buy another REL and pay attention to imaging...you will be amazed. I never go higher than 8'' on the sub (less cone mass = faster more articulate bass) Larger tend to be boomy but provide impact in spades. If theater impact is the goal then by all means get an 18'' sub. If sound quality and articulation and resolution are the goal...two 8 '' subs running in stereo sharing connection with the two main speakers. Remember dial in your sub's...They should never draw attention to themselves, ever. It should always sound like your mains are making all that bass.
Fairly certain GR Research DIY cables will outperform most all the cables you listed (I have not heard them all) GR Research cost a fraction of what you paid.
Informative video. Thanks for posting it. You cover many good points that I hope your subscribers will find informative. My rig is from the early 1970s, including speakers. The sound is very good, but it was always missing a solid bottom end foundation that my vintage speakers could not deliver. Today's listeners might think I mean boom box type of bottom end, but I do not mean that at all. Steve Guttenberg's video was the first to change my mind about using a sub in a stereo system. After much research and help from John Hunter, Lead Designer and Owner of REL, I purchased a REL T/5i. John's input was absolutely instrumental in making the correct purchase for my system. The REL T/5i fits nicely into my vintage eco sound system and helps complete the total image of the soundscape. This was a good buy. Hands down. It adds the missing bottom end that my vintage speakers could not supply. The sound now exceeds my ears' expectations. It is more alive than I ever would have thought. Thanks again!
Nice im enjoying my first sub Focal cub 3. And another point get a soundcard that has bass management and room correction you can change the +/-db, crossover in realtime you can sync easily the sub and loud speaker.
adam withers I have the bic f 12 for a 2.1 setup and I think it’s fine for most applications - not perfect but once you get it dialed in, I think you’ll be happy
Very clear and great content. Super USEFUL! I have not had a two-channel stereo for decades. I recently studied electronics over several months and so built a Valve Amplifier. This was quite a challenge. Your channel has been EXTREMELY useful for me to understand the other components involved in HiFi set up. THANK YOU!
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
the subs I have are dual 18inch and they are not for home tbh aka PA dual sub I got to get some speakers that are made for homes and shelves tbh @@anadialog
My DENON AVR-3808 is powering all TANNOY Revolution R2 and R3 speakers and has dual TANNOY TFX subwoofers connected to the LFE/subwoofer preout of the DENON. Obviously the system is a complete home theatre with decent capabilities of sound reproduction for my music listening at 2 channel stereo. I tried connecting High level input signal to subwoofers and low level RCA, however the best way to do it is through the dedicated LFE/Subwoofer preout as the Audyssey MultEQ-XT calibration does room calibration and gives a good result when matching the time alignment of all the speakers and combines the subwoofers together. Any other way is fine but I find this the best approach for bass management, crossover settings distance and time alignment of all speakers/subwoofers compared to the high or low level input signal I've tried.
I build my own subwoofer with a 1000 watts Sunfire 10" driver and a Skar Audio enclosure, with such power, then my problem is rattling noises all over the house, I am trying to decouple the subwoofer from the carpet, I will try to do that with pool noodles as my starting point, worst scenario is to get those fancy isolators from SVS. Thank you for sharing all this information.
I told ya bro!!! Once you go sub ya never go back!! Everyone needs multiple subs, no matter what your setup. I cannot emphasize how important it is to have more than one sub. Either 2 or 4. This will help “pressurize” the room and minimize any nulls. Rock on and keep up the awesome vids.!!
Hello. Kef KC62 vs Rel T7i comparison? Thanks. My speaker Xavian Perla Esclusiva + HegelH90 Briliant middle and hight frequency but low under 53 Hz not so much. I glad upgrade for this. Very educational video.
Excellent presentation! One think that’s a little bit tricky, is the corner positioning that you firstly propose..it raises by some db some frequencies of the sub’s spectrum, leading to some unwanted frequency boosting. I think that, in another video you must add a review for enhancing that low end frequency (or the whole) spectrum using a room analyzer!
Great video!!! I have the B&W ASW608 sub I just purchased. I have a Denon 9.2 receiver. Do I connect both "line out" cables to the receiver, or just one? Sorry, new to being an audiophile. I have a B&W 9.1 setup going (2 atmos speakers included) (no amp, just receiver)
Hi, when we set main stereo speakers as per secret speaker placement you know. The soundstage space is the area/ in line which sub sounds best,and slitely less on crossover frequency spectrum and high on volume to match main speakers.
I bought a rel back when they were new. I blew the amp years after the warranty expired. Fixed it for free anyway didn't even have to pay shipping. Just told me to take it back to the store I bought it from. That's when Richard Lord (the R and L) was still there.
You’ll need to get in touch with REL with regards to the crossover. They will tell you that you’ll need to overlap by 6-8hz and not go under and create a frequency hole. This is for seamless integration and to improve the midrange. If you are referring to John hunters video in upscale audio, REL will explain that further.
Yes, I do see a lot of people suggest that, and others say not to do that. The best, as I said, is to bump each other 40hz sub with 40hz speakers (for example). Since it's difficult I think it's better not to overlap, but again, you are right. a lot of people think overlapping is better. I the end, the best thing is to try all three possibilities and pick the one that sounds more natural!
@@anadialog Overlapping is always better idea. Every classic speaker lost some dB at the edge of its range. So you may have lets say 40 Hz but with effectiveness of minus 3 or even 6 dB. When you set you sub exactly at 40 Hz then you may hear frequences between 55 to 40 Hz (for intance) as a 'hole in sound'. Thats why overlapping is good idea.
Love your videos, thanks again. I have the 2020 model ATC 40's with 2x SVS sb2000 subs so similar to you. I absolutely love my music sessions, I'm very lucky to own my HiFi. (powered by Michi P5/S5).
Hi, really helpful video. Any recommendations for a sub for Yamaha NS10’s? Am using them as main reference speakers in home studio. But they are lacking in low end. Many thanks in advance👍🏾😄
REL Connection; I have REL also and studied about that connection subject. Connection should be .1/LFE + High level input. Please do not forget High level connection to amp's speakers outputs are power not only signal. Mean front left right are passive tower speakers. To sencronise their phase and sub REL solved it very well but you should connect High Level also. Last point DO NOT connect High level and Low level inputs at the same time , you can harm your "not cheap" REL. Thanks all your info.
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
Hi, Love the video. I accidentally sampled your voice on my kaossilator. Wondering if I could keep it as it sounds good. Talking about speakers for about 5 seconds.
It depends from your subwoofer. You should set the crossover at your speakers lowest frequency or, test both, slightly lower than that in order to avoid a juxtaposition.
I have an 8 inch H&K but I'm going to get a 12 ..But i really want stereo 12's .. there are a lot of pad sounds especially in ambient music where the bass is in stereo
I have Amphion Impact 400 subwoofer and white Amphion Ion L speakers. The placement of the subwoofer is not optimal because I hear some boom with certain music, but that cannot currently be helped. I still think they are better combo than my ears deserve but hey, why buy mediocre stuff if you get good gear used 😄 One thing of note about subwoofer placement is that if you live in building where houses are next to each other, basing it to the floor might have annoying consequences to your neighbors.
I have a dual monoblock class ab amp 300 watts 4ohm per channel driving my LR peerless 10” XLS sub in sealed Boxes super tight bass. My other 2 monoblock driving my 2.5 way all active using behringer active crossover superb system great soundstage
Guido, another great video- love your content. OK, you are dead on with point Number 6. Swapping the body position with subwoofer for maximum sound using ears as guide is - spot on. Keep up the GREAT fun work. (BTW, I purchased a cheap subwoofer- I know, I am sorry, for my ol 1971 Bang and Oulfsen Beovox 2650's and even on the cheap it was the best bang for the buck for my antiquated NAD 300 watt amp.)
I have a friend who is telling me to get one good single down firing ported subwoofer (I have real oak hardwoods) says if I get a second one it will add complications with cancellations in parts of my room. Is that not true and I would be better with two subs? I don't notice any dead spots in my room. 18'L x 14'W x 12'H Oak floor Vaulted ceiling, open archway to another large room. I have a 5.1.2 Atmos (heights) setup with SVS Prime Towers and Satellites . My sub is a single Klipsch R10sw 300w. REL seems a bit pricy, was looking at SVS SB2000, SB3000, PB2000. Advice?
Two subs are always butter but at that point, if expensive, consider upgrading your speakers. No you shouldn't have any phase problems if you choose subs with phase selection.
I agreed with you that the sound of a sub is not directional until i hooked them up in sterio. If you don"t beleve me put one on the left and one on the right and play Ringo"s drum solow on Abby Road. I AM NOT SWICHING MY SUBS BACK.
This is a subject that is often confused. Low frequencies being omnidirectional doesn’t mean you can’t localize them. Stars emit light in all directions and you can still localize them. Although it is true we can’t really localize very low frequencies (which again is a different topic than the fact that they are omnidirectional), you can start to localize them when your subwoofer reproduce the not-so-low frequencies. No crossover cut frequencies abruptly so it happens in all systems. And by the way, stereo subwoofers is the way to go, for multiple different reasons (it tends to correct for mode issues in your room, it lower distortion because you play your subwoofers lower, it improves the sense of space thanks to cues and reverberations being the information contained in those low frequencies, etc. etc.), so keep your dual subwoofers! Make sure you have them correctly integrated in stereo and with a proper dsp.
Wow...got this question...what do you think of a sub that goes down to 50hz? I got a Monoprice sub with an 8 inch drive and it says it goes down to 50hz. That's kind of weak isn''t. I got a pair of Sony SSCS5, and I'm waiting for the cables to come so I can hook everything up.
@@anadialog In other words, return the item is that right? So me being on a fixed income, maybe save for a few more months and get either a REL if I can find one for about $400 or $500, or a SVS...or maybe wait for one to go on sale?
Great video! I own a Primaluna Dialogue Premium HP integrated tube amp (and from what I've seen I am pretty sure you have the same model) and I was wondering what kind of connnection you've used (my amp has a dedicated mono output). Thanks and greetings from Italy ;)
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
Thanks for a well thought out video! However, what if your sub has no hi level inputs? I am using a vintage marantz receiver with no sub out. Most subs today have only low level inputs, svs, klipsch etc. I have restricted myself to shopping for subs with high level inputs and as a result I am concerned that I will not get the best deal or the best sub. Thank you
Get rid of the sub it was designed for just home theater...If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. That simple. Now go buy 2 with high level inputs and pay attention to imaging...you will be amazed.
Hello , I love your show. What about an amplifier that is able to turn off the base to the main two speakers and just allow the Bass to go to the subwoofer, is that a good idea .should Bass be left on the main speakers and the sub woofer at the same time. My amp is able to turn the low frequency off to the main two speakers and go to subwoofer only. Or should the base be left on and the sub at the same time
Yes, probably using a crossover. If your sub has a good frequency extension and overlaps the midrange of the speakers then, sure, you can use your sub only. Obviously do a test, your ears are the beat judge.
Getting 2 rel t5i tomorrow to go with my 25 year old linn aktiv speaker amp setup, as it's in different room now and is lacking a little bass compared to before and I refuse to part with my setup and may get the hiquphon upgraded tweeter for my speaker next! BTW love your channel
@@anadialog OK I'm loving them so far very easy to set up connected them high level off the speaker outs spent around an hr fine tuning the crossover and level now they are sounding more like the flagship model that linn did at the time the keltic! Mine are the kieldh, Just ordered the hiquphon tweeter upgrade for them can't wait. Jim. edit. more tweaking and wow just played leftfield * leftism 2nd track omg my babies are back! AND BETTER THAN BEFORE SEAMLESS!
@@bat2137 my Rels would like to thank you for the Afro left track! 15 minute edit later: 'Song of life' WOW! I'll probably be back again so bollocks to this... the whole album going to my playlist!
Question : If you have an AV amp with LFE pre out sub connected (5.1) and want to connect it for 2channel stereo as well via the speaker terminals.., is that possible ?
The best loudspeaker/s “systems” have ALWAYS been separates! Separates, ie. subwoofers have always offered “almost infinite” tuning options. So for example, “bookshelf (package)”speakers have been a myth of epic proportions! The example, within the example is the “loss” of sound stage, etc., when placed on the “bookshelves.” The myth has been perpetuated even to this day (2022). However, some to many audiophiles can’t even define sound stage to miss it, to really care.
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
I put my sub underneath my desk. Then, I stuff the surrounding cavity with pillows and thick sheets of pink 2 feet by 2 feet insulation . Also, weighted down the sub with a bag of aquarium gravel. My desktop doesn’t rumble and my tubes feel practically vibration free.
Also, I use an iso-acoustics speaker stand that helps raise the sound. The floor no longer becomes a sound factor. I actually use metallic bubblewrap that has a slight bend to them. I tape that sheet where the bass waves will reflect upwards.
If when I turn on my old and trusty REL Stentor, the sound gets 10 over ten, what would happen if I also did use supertweeters? The best positioning was the least expected, far from corners and in the middle of the right sidewall. Shocking.
I have a room size of 15*16 ft and I’m confused between selecting 1. Focal Chora 826 (latest) or Focal Aria 946 2. AVR Denon 3700H vs 4700H 3. 2 SVS SB 1000 Pro or 1 SVS SB 2000 Kindly let me know your thoughts.
Thank you! Awesome! I am considering the RSL Speedwoofer 10s. Seems it goes pretty low and well rated. Please advise.... Also I have a similar tile floor to yours in front of my small fireplace (unused and painted). I could put a subwoofer on anywhere in front, might it be good inside the fireplace? Love the blue gummy stuff idea! Thank you very much!!!
Seems very nice (looking at the specs and reviews), I haven't heard them, and an excellent price tag. If you decide to get it give us some feedback. The fireplace position will give some issues. It will dramatically increase the booming effect and it might echo in there. Try, but I am afraid that you are going to need to put some foam or some absorbent material for a more dry response.
Wow.. Awesome explanation!! Everything covered regarding setting up sub.. Have 1 question though currently have a sub taga harmony tsw 120 v2 which is on reverse phase, crossover at 35hz.. The thing is the volume only goes till about 20% of and if I put anything higher the sub cuts off and the power light starts blinking.. Any idea what could be the issue? Thanks for your time
@@MrAnkitmanchanda maybe the connection is the problem. Use the single sub output on your amp, as you are doing, and connect it to the single sub input, that is using a SINGLE RCA interconnect. Don't use the L and R inputs with the single sub output! In any case, since you have a high input connection, as I said in the video, you should be using those. Just connect each pair to each pair on the amplifier or to your speakers.
@@anadialog Apologies got the model no. of my sub wrong its SW-10 ver. 2.. and the Sub does not have single sub input.. it has 2 male RCA Low Input and only High Level Inputs hence had connected to L & R Inputs.. anyways I have ordered for a new Single input RCA cable and see how it performs.. Also, if result is the same then you think i should try and connect my sub on the High Level Inputs via Front L and R speakers and not use the Sub preout at all? Will this help?
I got a M&K MX 350, M&K says they invented the sub satellite system. It's a 12" Push pull config. Speed & attack are why I like Sealed subs like this used SVS SB1000 I found.
On my desktop system, I keep my sub underneath the desk. I found that I needed to tilt the sub upwards. I looked at guitar amplifier stands that offers a safe and stabile way to tilt the sub so my ankles don’t feel the rumble. By doing this, the soundstage raises and I feel the bass at my chest and belly areas.
Great video. I have one question, i haven a pair of B&W 602 s2 speakers will they pair with a Focal SW700 subwoofer? Worth make this addition to my hifi system. Also i have an Yamaha s501 integrated amplifier. Thank you in advance.
Hi there, yes I think they would. If you can, try looking for a model that goes even more deep. The Focal stops at 36Hz, surely a great improvement from the 70Hz of the B&W.
Very interesting vid. I've heard or read somewhere that it is possible to damage your main power amp when connecting the black wire from a REL to a negative connection on your amp. Is this true? Do I even need to connect the black wire? I assume it's an earth connection to reduce hum. I'm using a Meridian power amp and Focal aria 936's
I have two Rels hooked-up to each individual speaker binding posts and I've experimented with using black wire and non-black wire being hooked-up! All safe and sound!
@@anadialog the internal struggle i am having is that the 8 inch sub is ported and the svs 12 inch is a sealed sub, my bedroom is only about 11 by 12 feet.
@@anadialog that's what I figured. I have an older design from Sandy Gross from about 12 years ago. Definitely technology BP7002. I wonder how they would hold up. I imagine the high frequency to be smoother with the ribbon tweeters. Hmmmmm
what happen if u have an 3 channel amp on a stereo setup?? can i hook up or use that third empty channel for the sub in a passive way?? does the volume knob will work?
@@anadialog You can add a sub-woofer to a system with a little care and not disrupt the sound from your existing speakers. Adding another tweeter, particularly when they are front facing like yours, is madness. It will have, no doubt about it, comb filtering. Phase issues will cause both constructive and destructive disruption. I'm 61 but I can still tell the difference between 320Mbp Mp3 and a FLAC. Most of my recordings are Red Book, some DSDs. The only reason I would add another tweeter is on the back or top of the enclosure. The reflected sound provides ambience and is not in direct line with the existing tweeter. Now you know why I fell off my chair.
Ok I see. I am not adding another tweeter but a super tweeter, which means ultrasonics and the generated harmonics. The rest is not reproduced. Before continuing, please be honest and tell me if you have ever tried a pair in your system...
@@anadialog No never have spent money on a super tweeter nor any of my friends. That's my honest answer. Here's my question to you, which I hope will be answered honestly. Your Townshend Super Tweeters kick in at 6khz, tell me how it is physically possible for them not to cause an interference pattern with your existing system. Please provide an answer based on science.
Now I understand. Ok, yes that is true. The overlapping of frequencies is never a good idea. Nevertheless, these ribbon super tweeters are truly amazing plus you can increase their 'presence' with a knob by 6 steps. I can say that wity my integrated amp they blended better in, with my tube amp, a little less. After all of this, with high resolution analog and digital material, it is worth a try. You do not have direct experince and I was skeptical for the same reason but I can only say, they do make a change and in better. Not always though. In some very rare cases I must admit that the sound is too harsh and I must switch them off. Also, the fit in with a piggyback plug so timing is not an issue. Obviously, an integrated super supertweeter, just like an integrated sub, is always going to be better. This is my honest reply.
Are you referring to a spelling mistake or something like that? It is true that I am Italian and make a lot of mistakes but the word Choose is spelt correctly...or am I missing something?
If Steve Guttenberg is an audio guru, then my SUV is the pope mobile. BTW, I have to ask. Before you got on the subwoofer bandwagon, per chance were you one of those so-called purists who mocked every 2-channel enthusiast owning a subwoofer? :) REL and others highly recommend high-level connections from the main amps to the sub amps because of the greatest potential to get matching input signals between the main speakers and subs. I've never tried high-level connections to my single sub as I possess 2 Class D monoblock amps and a single subwoofer and according to REL and others I most could damage the amps if I tried. But the more I think about REL's high-level connection recommendation, I cannot find much logic in their reasoning for the following: 1. Every amp has its own sonic signature. Hence, whatever high-level signal is being passed from the main amps to the sub amps will be altered anyway after being amplified by the sub amps which most likely are not a direct matching amps. 2. REL has its own custom high-level cables and since every cable has its own sonic signature, there's not much chance that the main speaker cables will sonically match REL's cables. 3. There's the timing issue. The signal to the sub drivers must pass thru two amplifiers (main amps and then sub amps) whereas the main speaker signal is passing thru 1 amp. 4. Then there's the speed issue. In addition to general characteristic differences, cables can also have at least sonically perceived speed differences that greatly affect perceived tempo. The likelihood that the REL cables will match the perceived tempo of the main speaker cables is rather slim. 5. I'm going to toss this out only as a possibility. They say that high-level connections do nothing but pass the signal. But how many times have "they" been wrong. Especially if "they" don't know what to measure and/or listen for? That said, I'd venture those are 4 (maybe 5) significant strikes against high-level connections being optimal and the chances of the sub's input signal being similar to the main speakers is close to zero. On the other hand with low-level connections: 1. I learned years ago that one of the easiest ways toward sync'ing up a sub to the mains is by using identical interconnects at the sub that are used elsewhere. Having unmatched ic's can easily lead to a disjointed sound between subs and mains. 2. Both the main amps and sub amps stand less of a chance of any interference or difference in input signal and both speakers and subs are only making a single pass thru its own amplifier even though the amps will most likely have different sonic signatures. Hence, greater opportunity for timing to be more of a non-issue. Lastly, I suspect the most important part of sync'ing any sub to the main speakers has to do with matching speed or quickness (tempo). And given my reasons above about high-level connections, I have to suspect high-levels connections are the least ideal option. Or at the very least, the odds are not in high-level connections favor.
I just have a question for anyone really.. I am using the Elac B6.2 bookshelf speakers. The speaker specs claim they are 44hz on the low end.. What crossover frequency setting should I use on a subwoofer?
Maybe a dedicated home theater amp could but not a normal stereo amp, which os design for music. When you don't have any other connection solutions like in the past you use the subwoofer rca output.
Sub woofer output to splitter then splitter to cd channel on amp2. Hook up 4 car subs on speakers A and B left and right. I did that to my 7.1 and now it has 4 subs but all hetting the same signal. Each sub is in each corner of the room.
![ANA[DIA]LOG](http://yt3.ggpht.com/50CpmGNilS8aoMlarZVhI_GxRDoZdbj4ZgwCMZXg-Rq2PrEvCytlE6RVyLUrNY-rwE_sAlZ1Zw=s48-c-k-c0x00ffffff-no-rj)
I was convinced that you only need 1 subwoofer, so I did a lot of investigating on info of having 2 subs. I decided to order another one same make and model. WOW, adding the 2nd one really improved the overall sound of my system. I WILL NEVER GO BACK TO ONLY 1 SUB.!!!!!
Bravo!!
2- 12” definitive technologies broke one of the sliding glass doors 😮.
This system cost me more than I wanted to spend.
PLEASE MAY I SAY . NO WAFFLE STRAIGHT FROM THE SHOULDER. THIS HAS BEEN THE BEST ADVICE I HAVE READ ,AND I THANK YOU VERY MUCH. HARRY HOLDEN.
I bought a REL 10 years ago, and it sounds the same today. It is paired with my OHM F's. HEAVEN!
OHM A's and F's are fantastic speakers. Heard the A's when they came out in the 70's and the F's later. Tempted to buy a pair, but don't think they would go well we my Khorns.
Great video. I am running KEF LS50s with a single REL T5i in a small room and very happy with the result. To make myself even more happier I am looking to buy a second sub. The reason you’d want two subs is not stereo sound, but to get your frequency response as flat as possible. Flat response is almost impossible to achieve with a single sub in a typical room. You will have peaks and dips, meaning that at some frequencies your sub will sound louder and at some - quieter. The differences in loudness between frequencies can be as big +-10-20db, so it is very noticeable.Those peaks and dips depend on the positioning of the sub in the room, so when you have two subs located in opposite sides of the room their frequency graphs will blend together and provide much more natural and balanced bass.
Thanks for explaining that!
I find by having dual subs the integration being a whole lot smoother/easier, it's probably because i have two Rel 8" down-firing T5is positioned behind the couch, which are 6"-8" away from the corners and having them both connected to each individual stereo speaker binding posts (high level input)
The biggest compliment I get is when a guest/friend ask.... "how come you get such a huge sound from at such a small speaker" 😁
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
Really enjoying your videos. The level of details, pace and presentation are really easy to follow and helpful. Keep it coming!
wow, this guy is legit. very educational. very good speaker too. i agree on having 2 sub but also have sub lower than speakers. learn alot. thanks....
I have several pairs of speakers setup in a modest arc in my listening room combined with one subwoofer for one of my systems. I have found toe in tuning of both the speakers and the sub enhances the overall balance of sound. For my surround system I have a separate 15” sub in a corner location and sitting on a large marble tile to aid in dispersion. For testing I have used demo frequency response disk and my favorite bass recording is Leo Lyon’s recording of “Faro” from Ten Years After Stonedhedge. It features several bass guitars together across the soundstage. Enjoy!
I got the T5i and it was the Best thing I've done. When I've turned the sub off of a night sometimes I forget the next day and put sounds on and it sounds thin, I nearly had a panic attack until I realised 🙃! 😎
Hey!
I never comment videos on youtube but I'm glad I did it so you changed your mind on subs. Glad you saw the links I sent you too, Paul McGowan is indeed very good at teaching all his knowledge.
So again, I'm really happy you get one and experimented with it, although I have one comment to make (who doesn't?):
You say that you don't need a sub if your speakers go bellow 20hz, and I am not comfortable with that idea. As I told you, and you surely saw it on McGowan's video, a servo sub is not all about low frequencies, but helping the mids too, because it is servo-controlled. If your passive speakers go to let say 18hz, it will not be as good and clean as a 18hz servo-sub (because it is servo-controlled (inertia etc...)). So a sub is not only for low frequencies but for mids as well. It can do wonders on voices for exemple (but I'm sure you have experience it by now).
Apart from that I'm really glad you changed your mind and get one. I have to say I don't own one (just changed my speakers and amp so it has to wait a bit), but I heard what it can do. I continue to watch all you videos and I'm glad someone like you is out there teaching new members of our community.
I'd also be glad to communicate and exchange ideas and experience with you, if you're interested of course. Send me a message and I'll give you my mail, facebook or whatever.
Keep doing what you do, you're doing a great job!
Hi Joseph! Yes, yours and other comments as I said got me thinking. Its the same principle of the supertweeters. Yes, of course, lower frequencies develop the midrange but also a part of the upper frequencies. But that is not a special feature of subs. Even a loudspeaker with good, deep bass, will obviously do the job and even better. Subs are necessary only when your loudspeakers are inefficient in the lower register. Just like supertweeters for the highs.
I wish they had these subwoofers back in the 1980's! I bought an inexpensive downfiring Acoustic Audio PSW-10 subwoofer and what a difference it made matched with my old B&W DM11's. Changed my world! Picking a subwoofer is totally subjective. I like to feel it so I picked a down firing subwoofer. You gave some good advice thanks for sharing :)
Thanks Kenny!
Good video my man. Thank you! I got myself rel t5i subwoofer and it was the best purchase I made in a long time. The bass was tight and fast comparing to my old $300 subwoofer. Like you said better wait and get the right sub than waste on the cheap one.
I'm sure you were impressed just as much as I was when we first experienced our Rels. If you to purchase another one not only would you find the integration a whole lot smoother/easier but you would finally realise what your room sounds like at its full low-end potential! In fact I was just as impressed as with my first as with the second!!!
I find by having dual subs the integration being a whole lot smoother/easier, it's probably because i have two Rel 8" down-firing T5is positioned behind the couch, which are 6"-8" away from the corners and having them both connected to each individual stereo speaker binding posts (high level input)
The biggest compliment I get is when a guest/friend ask.... "how come you get such a huge sound from at such a small speaker" 😁
Little subtle satisfactions in life! ;-)
Another point to consider on wether or not, is what size speakers your system has, my system is made up of bookshelf speakers that simply dont have the bass capacity of say a tower speaker, so my sub compliments the smallet bookshelf speaker. Very informitive video by the way.
True, thanks for pointing that out!
You covered all the basis here
I have used both Rel and Vandersteen both hook up to the amplifier and I have owned both. My current Vandersteen speakers have subs built in. Good advise here, keep it coming.
Thanks sid!
My Polk T15 speakers supposedly cover the whole range. Obviously they don’t. I added a Yamaha 8” sub and wow. Now that’s my modest but really full range (for the price point, I mean) hi-fi system, and I’m happy with it (for now) 😉
Good job!!
Excellent video Sir!
As an adjunct to your thoughts...
I use a single REL SHO-5 with my system and have recently moved to a large home in Washington from a townhome in California. I have not had the opportunity to unpack my sub yet. I've also been moving my system around the main room and finally found the best room placement for the "whole" system... Part of the change was also going from a concrete foundation in CA to a wooden elevated foundation in WA.
Other issues include cathedral ceilings (16 ft) and these new combined rooms (Living room, kitchen and non-formal dining area all together) present BIG challenges for us audiophiles to tackle (reverb, echo, huge space to fill with sound, delayed rear reflections, smearing, large windows, hard surfaces everywhere, flexible wood foundation/flooring).
So, long story short... I'm getting closer to finishing my system, but noticed immediately that the life/fullness of the music has diminished greatly without my sub in the system! It's one of those things that once you experience it, you just can't be satisfied with less.
So, that is one of my weekend projects. To get the life back in my music.
On another note, I found that moving my system to a different wall greatly improved the system resistance to the echo and reverb (probably because the rear boundary is now not just a flat wall and I am now parallel with the cathedral ceiling and equidistant from the side walls. It is tough to place a system in a weirdly proportioned room! I had to take over the non-formal dining area for my right speaker... (yes, Bachelor. But would give it up for the right woman! Hahaha... only the right speaker area of course!). Also, buying area rugs throughout and will look into sound absorption to tame reverb/echoes.
[I have a nice system consisting of Focal 1038BE II Main speakers (Very good, but I want better someday), REL SHO-5 sub x 1( Excellent, and I can't afford 2 yet.) Primaluna Dailogue HP Integrated Amp (Beautiful and powerful sound...) with PS Audio DirectStream DAC (Wonderful!!) and CD Player (Amazing) and Phono PreAmp (very good). Blusound Node 2i streamer (great for the money). I also have an Oracle Audio Origins Turn Table (good sound, but clunky ergonomics of usage and very susceptible to outside vibration) and SoundSmith cartridge (Amazing!!).All cabling is DH Labs (Excellent value proposition... 30%the cost for 95%the performance.!) Cables DO make a huge difference!! I did A/B/C comparisons with my system above and it was immediate and HUGE!! Tested Streetwires (car audio- my beginnings are High end Car Audio) 12g OFC Ultra Speaker Cable (Very good basic cable, Bulk=$500 for 250ft.) vs Nordost Heimdall 2 (Excellent silver plated lower high range cable, $2400 for 3 meter pair) vs DH Labs Q-10 Signature (Excellent Long grained Copper Silver plated cables within excellent value proposition! $850 for a 3 meter pair) The Nordost was night and day to the Streetwires and better than the DH Labs, but not by much! Differences included definition, clarity, presence, soundstage, Frequency response (slight upper frequency roll-off with the Streetwires. None for the others (due to the better conductor material my guess).
Yes, Silver conductors make significant differences. Try Stinger 9000 series car audio Interconnects (
@Brian Shoemaker Hi there! Thanks for taking the time to explain all of this. Sorry for my late asnwer. I just can say...what a fabulous system you have there! Truly amazing! I haven't decalred this yet on the channel but I got your same amp and it is truly outstanding. I would love to put my hands on those PS audio streamers...wow! Considering your question and your gear, maybe the loudspeakers could be upgraded...but seriously, both Focal and Oracle audio TT are excellent pieaces of gear. Let me know if you change your speakers...I am going to do that in the future...
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. Now go buy another REL and pay attention to imaging...you will be amazed. I never go higher than 8'' on the sub (less cone mass = faster more articulate bass) Larger tend to be boomy but provide impact in spades. If theater impact is the goal then by all means get an 18'' sub. If sound quality and articulation and resolution are the goal...two 8 '' subs running in stereo sharing connection with the two main speakers. Remember dial in your sub's...They should never draw attention to themselves, ever. It should always sound like your mains are making all that bass.
Fairly certain GR Research DIY cables will outperform most all the cables you listed (I have not heard them all) GR Research cost a fraction of what you paid.
This really helped me a lot. You told this in plain language a novice like me can understand. Thank you.
Informative video. Thanks for posting it. You cover many good points that I hope your subscribers will find informative. My rig is from the early 1970s, including speakers. The sound is very good, but it was always missing a solid bottom end foundation that my vintage speakers could not deliver. Today's listeners might think I mean boom box type of bottom end, but I do not mean that at all. Steve Guttenberg's video was the first to change my mind about using a sub in a stereo system.
After much research and help from John Hunter, Lead Designer and Owner of REL, I purchased a REL T/5i. John's input was absolutely instrumental in making the correct purchase for my system. The REL T/5i fits nicely into my vintage eco sound system and helps complete the total image of the soundscape.
This was a good buy. Hands down. It adds the missing bottom end that my vintage speakers could not supply. The sound now exceeds my ears' expectations. It is more alive than I ever would have thought.
Thanks again!
Cool! Thank you for sharing!
one of the perfect video found on internet
Nice im enjoying my first sub Focal cub 3. And another point get a soundcard that has bass management and room correction you can change the +/-db, crossover in realtime you can sync easily the sub and loud speaker.
Cool!
i was thinking the bic f12 was a good budget option, now considering the yamaha as well. I also have heard good things about the svs subs
adam withers I have the bic f 12 for a 2.1 setup and I think it’s fine for most applications - not perfect but once you get it dialed in, I think you’ll be happy
Excellent overview of setting sub phasing and crossover and in what order..thanks!
Very clear and great content. Super USEFUL! I have not had a two-channel stereo for decades. I recently studied electronics over several months and so built a Valve Amplifier. This was quite a challenge. Your channel has been EXTREMELY useful for me to understand the other components involved in HiFi set up. THANK YOU!
Thank YOU so much!
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
the subs I have are dual 18inch and they are not for home tbh aka PA dual sub I got to get some speakers that are made for homes and shelves tbh @@anadialog
My DENON AVR-3808 is powering all TANNOY Revolution R2 and R3 speakers and has dual TANNOY TFX subwoofers connected to the LFE/subwoofer preout of the DENON. Obviously the system is a complete home theatre with decent capabilities of sound reproduction for my music listening at 2 channel stereo. I tried connecting High level input signal to subwoofers and low level RCA, however the best way to do it is through the dedicated LFE/Subwoofer preout as the Audyssey MultEQ-XT calibration does room calibration and gives a good result when matching the time alignment of all the speakers and combines the subwoofers together. Any other way is fine but I find this the best approach for bass management, crossover settings distance and time alignment of all speakers/subwoofers compared to the high or low level input signal I've tried.
I build my own subwoofer with a 1000 watts Sunfire 10" driver and a Skar Audio enclosure, with such power, then my problem is rattling noises all over the house, I am trying to decouple the subwoofer from the carpet, I will try to do that with pool noodles as my starting point, worst scenario is to get those fancy isolators from SVS. Thank you for sharing all this information.
Way to go!
I told ya bro!!! Once you go sub ya never go back!! Everyone needs multiple subs, no matter what your setup.
I cannot emphasize how important it is to have more than one sub. Either 2 or 4. This will help “pressurize” the room and minimize any nulls.
Rock on and keep up the awesome vids.!!
True! Thanks!
Hello. Kef KC62 vs Rel T7i comparison? Thanks. My speaker Xavian Perla Esclusiva + HegelH90 Briliant middle and hight frequency but low under 53 Hz not so much. I glad upgrade for this. Very educational video.
Kef for the Kefs!
Rels with almost anything!
Excellent presentation! One think that’s a little bit tricky, is the corner positioning that you firstly propose..it raises by some db some frequencies of the sub’s spectrum, leading to some unwanted frequency boosting. I think that, in another video you must add a review for enhancing that low end frequency (or the whole) spectrum using a room analyzer!
Great video!!! I have the B&W ASW608 sub I just purchased. I have a Denon 9.2
receiver. Do I connect both "line out" cables to the receiver, or just
one? Sorry, new to being an audiophile. I have a B&W 9.1 setup going
(2 atmos speakers included) (no amp, just receiver)
Hi, when we set main stereo speakers as per secret speaker placement you know. The soundstage space is the area/ in line which sub sounds best,and slitely less on crossover frequency spectrum and high on volume to match main speakers.
REL used to be built in a little factory in South Wales. I used to deliver there. Nice guy.
Cool!
I bought a rel back when they were new. I blew the amp years after the warranty expired. Fixed it for free anyway didn't even have to pay shipping. Just told me to take it back to the store I bought it from. That's when Richard Lord (the R and L) was still there.
You’ll need to get in touch with REL with regards to the crossover. They will tell you that you’ll need to overlap by 6-8hz and not go under and create a frequency hole. This is for seamless integration and to improve the midrange. If you are referring to John hunters video in upscale audio, REL will explain that further.
Yes, I do see a lot of people suggest that, and others say not to do that. The best, as I said, is to bump each other 40hz sub with 40hz speakers (for example). Since it's difficult I think it's better not to overlap, but again, you are right. a lot of people think overlapping is better. I the end, the best thing is to try all three possibilities and pick the one that sounds more natural!
@@anadialog
Overlapping is always better idea.
Every classic speaker lost some dB at the edge of its range.
So you may have lets say 40 Hz but with effectiveness of minus 3 or even 6 dB. When you set you sub exactly at 40 Hz then you may hear frequences between 55 to 40 Hz (for intance) as a 'hole in sound'. Thats why overlapping is good idea.
Love your videos, thanks again.
I have the 2020 model ATC 40's with 2x SVS sb2000 subs so similar to you. I absolutely love my music sessions, I'm very lucky to own my HiFi. (powered by Michi P5/S5).
Thanks that was really helpful and I’m now trying it for sub
Hi, really helpful video. Any recommendations for a sub for Yamaha NS10’s? Am using them as main reference speakers in home studio. But they are lacking in low end. Many thanks in advance👍🏾😄
REL Connection; I have REL also and studied about that connection subject. Connection should be .1/LFE + High level input. Please do not forget High level connection to amp's speakers outputs are power not only signal. Mean front left right are passive tower speakers. To sencronise their phase and sub REL solved it very well but you should connect High Level also. Last point DO NOT connect High level and Low level inputs at the same time , you can harm your "not cheap" REL. Thanks all your info.
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
Great video thanks much , I was just wondering did you get 2 t9i or one thanks again.
One, two is better though!
@@anadialog thanks for the reply, I'm looking to get Rel britannia B2, hopefully one will be enough cheers
Great video and really well explained. That's been a massive help. Many thanks
Hi, Love the video. I accidentally sampled your voice on my kaossilator. Wondering if I could keep it as it sounds good. Talking about speakers for about 5 seconds.
😆sure!
I’m looking forward to seeing your video again when I get one. May be awhile, great help for me again.
Thanks Allen!
@@anadialog what should my subs crossover be
It depends from your subwoofer. You should set the crossover at your speakers lowest frequency or, test both, slightly lower than that in order to avoid a juxtaposition.
@@anadialog ok, thanks friend!
I have an 8 inch H&K but I'm going to get a 12 ..But i really want stereo 12's .. there are a lot of pad sounds especially in ambient music where the bass is in stereo
I have Amphion Impact 400 subwoofer and white Amphion Ion L speakers.
The placement of the subwoofer is not optimal because I hear some boom with certain music, but that cannot currently be helped. I still think they are better combo than my ears deserve but hey, why buy mediocre stuff if you get good gear used 😄
One thing of note about subwoofer placement is that if you live in building where houses are next to each other, basing it to the floor might have annoying consequences to your neighbors.
SPL-120 works 💪!!! I've 3 (2 stereo connected and one LFE)
I have a dual monoblock class ab amp 300 watts 4ohm per channel driving my LR peerless 10” XLS sub in sealed
Boxes super tight bass. My other 2 monoblock driving my 2.5 way all active using behringer active crossover superb system great soundstage
Guido, another great video- love your content. OK, you are dead on with point Number 6. Swapping the body position with subwoofer for maximum sound using ears as guide is - spot on. Keep up the GREAT fun work. (BTW, I purchased a cheap subwoofer- I know, I am sorry, for my ol 1971 Bang and Oulfsen Beovox 2650's and even on the cheap it was the best bang for the buck for my antiquated NAD 300 watt amp.)
Nice video sir I've learned a lot.from ur video .god bless
I have a friend who is telling me to get one good single down firing ported subwoofer (I have real oak hardwoods) says if I get a second one it will add complications with cancellations in parts of my room. Is that not true and I would be better with two subs? I don't notice any dead spots in my room. 18'L x 14'W x 12'H Oak floor Vaulted ceiling, open archway to another large room. I have a 5.1.2 Atmos (heights) setup with SVS Prime Towers and Satellites . My sub is a single Klipsch R10sw 300w.
REL seems a bit pricy, was looking at SVS SB2000, SB3000, PB2000. Advice?
Two subs are always butter but at that point, if expensive, consider upgrading your speakers. No you shouldn't have any phase problems if you choose subs with phase selection.
You should look at what the response drop off is on your loud speaker. Most loud speakers have serious drop off under 80hz
I agreed with you that the sound of a sub is not directional until i hooked them up in sterio. If you don"t beleve me put one on the left and one on the right and play Ringo"s drum solow on Abby Road. I AM NOT SWICHING MY SUBS BACK.
I believe you! In fact I said that this idea is changing now, and that is why!Two subs are ideal!
This is a subject that is often confused.
Low frequencies being omnidirectional doesn’t mean you can’t localize them. Stars emit light in all directions and you can still localize them.
Although it is true we can’t really localize very low frequencies (which again is a different topic than the fact that they are omnidirectional), you can start to localize them when your subwoofer reproduce the not-so-low frequencies. No crossover cut frequencies abruptly so it happens in all systems.
And by the way, stereo subwoofers is the way to go, for multiple different reasons (it tends to correct for mode issues in your room, it lower distortion because you play your subwoofers lower, it improves the sense of space thanks to cues and reverberations being the information contained in those low frequencies, etc. etc.), so keep your dual subwoofers!
Make sure you have them correctly integrated in stereo and with a proper dsp.
Wow...got this question...what do you think of a sub that goes down to 50hz? I got a Monoprice sub with an 8 inch drive and it says it goes down to 50hz. That's kind of weak isn''t. I got a pair of Sony SSCS5, and I'm waiting for the cables to come so I can hook everything up.
Yes, I would skip that. If you have to go through the effort, expense and setup I would at least go down to 25Hz. 20Hz clearly is best.
@@anadialog In other words, return the item is that right? So me being on a fixed income, maybe save for a few more months and get either a REL if I can find one for about $400 or $500, or a SVS...or maybe wait for one to go on sale?
Do the Epic CL 3 Klipsch need a subwoofer? I inherited a 10” KEF PSW 2150 powered subwoofer. Not sure if I needed. Thanks and great video by the way.
Look at the frequency response, if it stops way above 20Khz, like 50Hz or 60Hz, I think it is a good idea.
Great video! I own a Primaluna Dialogue Premium HP integrated tube amp (and from what I've seen I am pretty sure you have the same model) and I was wondering what kind of connnection you've used (my amp has a dedicated mono output). Thanks and greetings from Italy ;)
Yes, great amp! I am using the speaker outputs. If you have the possibility, the high level connection like REL is the best IMO.
@@anadialog even my girlfriend, Who she's the "I don't give a fuck about HI Fi but I have Bionic ear" type of girl felt in love with It ;)
😄👍
I have 2 10" Paradigm subwoofers on my system. Where should the phase setting be for running 2 subs? Do I set them both to the same setting?
Yes, otherwise they work one against the other. Clearly before that you must also see if the phase is in contrast with the speakers.
@@anadialog.
thanks for your reply
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
Thanks for a well thought out video! However, what if your sub has no hi level inputs? I am using a vintage marantz receiver with no sub out. Most subs today have only low level inputs, svs, klipsch etc. I have restricted myself to shopping for subs with high level inputs and as a result I am concerned that I will not get the best deal or the best sub. Thank you
True. Each model will follow it's best type of connection. The high level is just good because there is no latency.
Get rid of the sub it was designed for just home theater...If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment your 2 main speakers. That simple. Now go buy 2 with high level inputs and pay attention to imaging...you will be amazed.
Great vid. Should I set my crossover on my route speaker on Crown amplifier or both?
Speaker!
New subscriber. Very informative. Right to the point. Love that ty
Ciao Guido, con la connessione di potenza devo comunque tenere acceso il subwoofer giusto? Grazie
Si, sono comunque sempre casse attive!
Hello , I love your show. What about an amplifier that is able to turn off the base to the main two speakers and just allow the Bass to go to the subwoofer, is that a good idea .should Bass be left on the main speakers and the sub woofer at the same time. My amp is able to turn the low frequency off to the main two speakers and go to subwoofer only. Or should the base be left on and the sub at the same time
Yes, probably using a crossover. If your sub has a good frequency extension and overlaps the midrange of the speakers then, sure, you can use your sub only. Obviously do a test, your ears are the beat judge.
All this sub talk is making me want a chicken cutlets sub with parmesan cheese!!!! lol . Nice video brother!!!
Thanks Carmine!
Getting 2 rel t5i tomorrow to go with my 25 year old linn aktiv speaker amp setup, as it's in different room now and is lacking a little bass compared to before and I refuse to part with my setup and may get the hiquphon upgraded tweeter for my speaker next! BTW love your channel
Great! Tell us how is the final result!
@@anadialog I will thanks, Jim.
@@anadialog OK I'm loving them so far very easy to set up connected them high level off the speaker outs spent around an hr fine tuning the crossover and level now they are sounding more like the flagship model that linn did at the time the keltic! Mine are the kieldh, Just ordered the hiquphon tweeter upgrade for them can't wait. Jim. edit. more tweaking and wow just played leftfield * leftism 2nd track omg my babies are back! AND BETTER THAN BEFORE SEAMLESS!
@@bat2137 my Rels would like to thank you for the Afro left track!
15 minute edit later:
'Song of life' WOW! I'll probably be back again so bollocks to this... the whole album going to my playlist!
Very informative. Nice video.
Thanks!
Would you recommend to use Bluetooth connections on subs ?
Thank you,
I wouldn't. Technology is still behind there. Not all frequencies are delivered plus there is a digital conversion and slight delay.
Question : If you have an AV amp with LFE pre out sub connected (5.1) and want to connect it for 2channel stereo as well via the speaker terminals.., is that possible ?
The best loudspeaker/s “systems” have ALWAYS been separates! Separates, ie. subwoofers have always offered “almost infinite” tuning options. So for example, “bookshelf (package)”speakers have been a myth of epic proportions! The example, within the example is the “loss” of sound stage, etc., when placed on the “bookshelves.” The myth has been perpetuated even to this day (2022). However, some to many audiophiles can’t even define sound stage to miss it, to really care.
If sound quality is the goal, avoid RCA inputs like the plague. He is right on 1 point. High level input is the best, he just only partially understands why. 2 subwoofers running in stereo quite literally image as much as any 2 full range speakers. Wired directly to your main amplifiers outputs sharing that connection with the 2 main speakers. The magic happens when both sub's and the 2 main speakers work together to present the soundscape. Imaging together with stereo sub's is the only way to truly compliment you 2 main speakers. That simple. Now go buy another REL and pay attention to imaging...you will be amazed.
I put my sub underneath my desk. Then, I stuff the surrounding cavity with pillows and thick sheets of pink 2 feet by 2 feet insulation . Also, weighted down the sub with a bag of aquarium gravel. My desktop doesn’t rumble and my tubes feel practically vibration free.
Also, I use an iso-acoustics speaker stand that helps raise the sound. The floor no longer becomes a sound factor.
I actually use metallic bubblewrap that has a slight bend to them. I tape that sheet where the bass waves will reflect upwards.
Great video again ! 🇸🇪🇸🇪🇸🇪
Thanks Peter!
If when I turn on my old and trusty REL Stentor, the sound gets 10 over ten, what would happen if I also did use supertweeters?
The best positioning was the least expected, far from corners and in the middle of the right sidewall. Shocking.
Interesting! Congrats for achieving that...not that simple actually!
@@anadialog more than twenty five years and a little of luck. You know that God is in the nuances 😉
@@salvadorrodenas3071 true!
I have a room size of 15*16 ft and I’m confused between selecting
1. Focal Chora 826 (latest) or Focal Aria 946
2. AVR Denon 3700H vs 4700H
3. 2 SVS SB 1000 Pro or 1 SVS SB 2000
Kindly let me know your thoughts.
Thank you! Awesome! I am considering the RSL Speedwoofer 10s. Seems it goes pretty low and well rated. Please advise.... Also I have a similar tile floor to yours in front of my small fireplace (unused and painted). I could put a subwoofer on anywhere in front, might it be good inside the fireplace? Love the blue gummy stuff idea! Thank you very much!!!
Seems very nice (looking at the specs and reviews), I haven't heard them, and an excellent price tag. If you decide to get it give us some feedback.
The fireplace position will give some issues. It will dramatically increase the booming effect and it might echo in there. Try, but I am afraid that you are going to need to put some foam or some absorbent material for a more dry response.
Another one bites the dust for good bass
Wow.. Awesome explanation!! Everything covered regarding setting up sub..
Have 1 question though currently have a sub taga harmony tsw 120 v2 which is on reverse phase, crossover at 35hz.. The thing is the volume only goes till about 20% of and if I put anything higher the sub cuts off and the power light starts blinking.. Any idea what could be the issue? Thanks for your time
It seems that it is somehow overpowered. How is it connected?
@@anadialog sub pre out on my yamaha avr htr 3067 via 1 male RAC x 2 male RAC on low input points in sub
@@MrAnkitmanchanda maybe the connection is the problem. Use the single sub output on your amp, as you are doing, and connect it to the single sub input, that is using a SINGLE RCA interconnect. Don't use the L and R inputs with the single sub output! In any case, since you have a high input connection, as I said in the video, you should be using those. Just connect each pair to each pair on the amplifier or to your speakers.
@@anadialog Apologies got the model no. of my sub wrong its SW-10 ver. 2.. and the Sub does not have single sub input.. it has 2 male RCA Low Input and only High Level Inputs hence had connected to L & R Inputs.. anyways I have ordered for a new Single input RCA cable and see how it performs..
Also, if result is the same then you think i should try and connect my sub on the High Level Inputs via Front L and R speakers and not use the Sub preout at all? Will this help?
@@MrAnkitmanchanda try the high level inputs connecting them to the amp and see what happens.
Very helpful
Thanks John!
I got a M&K MX 350, M&K says they invented the sub satellite system. It's a 12" Push pull config. Speed & attack are why I like Sealed subs like this used SVS SB1000 I found.
you think like i do, great honest advice
nice lesson.
On my desktop system, I keep my sub underneath the desk.
I found that I needed to tilt the sub upwards. I looked at guitar amplifier stands that offers a safe and stabile way to tilt the sub so my ankles don’t feel the rumble.
By doing this, the soundstage raises and I feel the bass at my chest and belly areas.
good stuff
Great video.
I have one question, i haven a pair of B&W 602 s2 speakers will they pair with a Focal SW700 subwoofer? Worth make this addition to my hifi system. Also i have an Yamaha s501 integrated amplifier. Thank you in advance.
Hi there, yes I think they would. If you can, try looking for a model that goes even more deep. The Focal stops at 36Hz, surely a great improvement from the 70Hz of the B&W.
@@anadialog my budget is limited. I am looking for max 300 dollar's. Any suggestions at this price that would be better than focal?
Thank you
Last time I listened to this guy I ended up buying a Luxman L10
Great video ! Thanks !
Thank YOU!
very informative! I learn a lot. thank you.
Very interesting vid. I've heard or read somewhere that it is possible to damage your main power amp when connecting the black wire
from a REL to a negative connection on your amp. Is this true? Do I even need to connect the black wire? I assume it's an earth connection to
reduce hum. I'm using a Meridian power amp and Focal aria 936's
I haven't heard about this but If Rel recommends it I am afraid that maybe people got their connections mixed.
I have two Rels hooked-up to each individual speaker binding posts and I've experimented with using black wire and non-black wire being hooked-up!
All safe and sound!
Some good info, thanks
Thanks
amazing video, very well explained
I enjoyed your video but is it possible you are over thinking this subwoofer aspect. thanks.
I am gonna be swapping out my polk psw250 here soon for an svs 12" sub with the lfe input which my current polk doesn't have.
Cool!
@@anadialog the internal struggle i am having is that the 8 inch sub is ported and the svs 12 inch is a sealed sub, my bedroom is only about 11 by 12 feet.
"use a slave". Hahahahaha great video.
Are you still using a dedicated subwoofer with your new Golden ear?
Nope! Gone!
@@anadialog that's what I figured. I have an older design from Sandy Gross from about 12 years ago. Definitely technology BP7002. I wonder how they would hold up. I imagine the high frequency to be smoother with the ribbon tweeters. Hmmmmm
what happen if u have an 3 channel amp on a stereo setup?? can i hook up or use that third empty channel for the sub in a passive way?? does the volume knob will work?
Is that output? Is it home theater? No clear, explain better please...
No
Great walkthrough- Subwoofers are great but not in small rooms. I turned mine off for anything bar home theatre.
This guy sounds like Christoph Waltz.
I have Casta B horns fair bass , need more balance and frequency range
I got as far as you mentioning the super-tweeter. When I had picked myself off the floor I pressed STOP and typed this.
Ok, go ahead and type why...
@@anadialog
You can add a sub-woofer to a system with a little care and not disrupt the sound from your existing speakers.
Adding another tweeter, particularly when they are front facing like yours, is madness.
It will have, no doubt about it, comb filtering. Phase issues will cause both constructive and destructive disruption.
I'm 61 but I can still tell the difference between 320Mbp Mp3 and a FLAC. Most of my recordings are Red Book, some DSDs.
The only reason I would add another tweeter is on the back or top of the enclosure. The reflected sound provides ambience and is not in direct line with the existing tweeter.
Now you know why I fell off my chair.
Ok I see. I am not adding another tweeter but a super tweeter, which means ultrasonics and the generated harmonics. The rest is not reproduced. Before continuing, please be honest and tell me if you have ever tried a pair in your system...
@@anadialog No never have spent money on a super tweeter nor any of my friends. That's my honest answer.
Here's my question to you, which I hope will be answered honestly.
Your Townshend Super Tweeters kick in at 6khz, tell me how it is physically possible for them not to cause an interference pattern with your existing system. Please provide an answer based on science.
Now I understand. Ok, yes that is true. The overlapping of frequencies is never a good idea. Nevertheless, these ribbon super tweeters are truly amazing plus you can increase their 'presence' with a knob by 6 steps. I can say that wity my integrated amp they blended better in, with my tube amp, a little less.
After all of this, with high resolution analog and digital material, it is worth a try. You do not have direct experince and I was skeptical for the same reason but I can only say, they do make a change and in better. Not always though. In some very rare cases I must admit that the sound is too harsh and I must switch them off. Also, the fit in with a piggyback plug so timing is not an issue. Obviously, an integrated super supertweeter, just like an integrated sub, is always going to be better. This is my honest reply.
so may i please inquire how to CHOOOOSE a subwoofer .
Are you referring to a spelling mistake or something like that? It is true that I am Italian and make a lot of mistakes but the word Choose is spelt correctly...or am I missing something?
I have a few subs but given up. Can't manage to tune them
I know...its a nightmare...insist or sell them and wait for a good pair of speakers!
If Steve Guttenberg is an audio guru, then my SUV is the pope mobile. BTW, I have to ask. Before you got on the subwoofer bandwagon, per chance were you one of those so-called purists who mocked every 2-channel enthusiast owning a subwoofer? :)
REL and others highly recommend high-level connections from the main amps to the sub amps because of the greatest potential to get matching input signals between the main speakers and subs.
I've never tried high-level connections to my single sub as I possess 2 Class D monoblock amps and a single subwoofer and according to REL and others I most could damage the amps if I tried.
But the more I think about REL's high-level connection recommendation, I cannot find much logic in their reasoning for the following:
1. Every amp has its own sonic signature. Hence, whatever high-level signal is being passed from the main amps to the sub amps will be altered anyway after being amplified by the sub amps which most likely are not a direct matching amps.
2. REL has its own custom high-level cables and since every cable has its own sonic signature, there's not much chance that the main speaker cables will sonically match REL's cables.
3. There's the timing issue. The signal to the sub drivers must pass thru two amplifiers (main amps and then sub amps) whereas the main speaker signal is passing thru 1 amp.
4. Then there's the speed issue. In addition to general characteristic differences, cables can also have at least sonically perceived speed differences that greatly affect perceived tempo. The likelihood that the REL cables will match the perceived tempo of the main speaker cables is rather slim.
5. I'm going to toss this out only as a possibility. They say that high-level connections do nothing but pass the signal. But how many times have "they" been wrong. Especially if "they" don't know what to measure and/or listen for?
That said, I'd venture those are 4 (maybe 5) significant strikes against high-level connections being optimal and the chances of the sub's input signal being similar to the main speakers is close to zero.
On the other hand with low-level connections:
1. I learned years ago that one of the easiest ways toward sync'ing up a sub to the mains is by using identical interconnects at the sub that are used elsewhere. Having unmatched ic's can easily lead to a disjointed sound between subs and mains.
2. Both the main amps and sub amps stand less of a chance of any interference or difference in input signal and both speakers and subs are only making a single pass thru its own amplifier even though the amps will most likely have different sonic signatures. Hence, greater opportunity for timing to be more of a non-issue.
Lastly, I suspect the most important part of sync'ing any sub to the main speakers has to do with matching speed or quickness (tempo). And given my reasons above about high-level connections, I have to suspect high-levels connections are the least ideal option. Or at the very least, the odds are not in high-level connections favor.
I just have a question for anyone really.. I am using the Elac B6.2 bookshelf speakers. The speaker specs claim they are 44hz on the low end.. What crossover frequency setting should I use on a subwoofer?
Some would say 44 others slightly below that...try both and decide which sounds better!
Doesn't the receiver handle lag ? What else is the Sub pre-out for ?
Maybe a dedicated home theater amp could but not a normal stereo amp, which os design for music. When you don't have any other connection solutions like in the past you use the subwoofer rca output.
Sub woofer output to splitter then splitter to cd channel on amp2. Hook up 4 car subs on speakers A and B left and right. I did that to my 7.1 and now it has 4 subs but all hetting the same signal. Each sub is in each corner of the room.