Brilliant video but had to laugh at the flat surface cleaner as you reminded me of the triggers broom sketch. 🤣 Had this for 8 years only replaced the wheels the arm, 🤣 thanks for this video Ash really helpful
Seriously can't thank you enough for the time you spent passing on your experience. Nervous time moment to start up but have decided go for it. Thanks again..
Hey! I’ve watched all your videos! I’ve been inspired over the last two years to have a go at my own Jet Washing business! So here goes for 2022! I’ve personally want to push the jet washing! Driveways, patios, concrete, tarmac etc! Walls! Thanks for your videos with advice! I will draw from your knowledge! I’ve always had a pressure washer! But now mines very similar to yours! 13HP 21LPM and I’m excited to see what the future has in store! I’ve named it “Deluxe Jet Washing NI” as I’m in Northern Ireland! 👍
Hi. You state that you started out with a jet washer that wasn't as powerful. What was the litres per minute of your first washer if you dont mind me asking? I want to start out but i note that anything over 15lpm is quite an expense. Can you use say a 16inch surface cleaner with a 10lpm washer? Thanks Chris
Maybe, just, but I don’t think it will be worth it. I started with a 15 litres per minute machine, and it wasn’t long before I realised that I needed more power. In the long run it’s worth getting a proper machine.😉👍🏼
Hey Ash great informative video. Do you or anyone you can recommend have a video of setting up so for example connecting the hoses, starting the pressure washer etc up to the point of using it?
Great! The hose from the customers tap just goes straight into the bin, and the pressure washer came with it’s hose already attached, so that just goes into the bin as well. Then the only connection you need to make is to connect your pressure hose with tool to the machine.😃👍🏼
Hi mate , love your videos . Very informative , looking to get into pressure washing driveways . Facias soffits , roofs etc . I want it as a side hustle , do you think it’s realistic to get a job a week on the weekends . With the competition out their , Thankyou x
Watching all your videos helping me out greatly for starting next year I have bought a 9.2lpm 3500psi max machine will this be OK to start off with I have a 15" surface cleaners attachment that will be the only piece of kit I think I might struggle with? Any and all your advice is greatly recieved.😊
I think you might struggle with that setup. It’s not all about the psi, most flat surface cleaners need at least 11 litres per minute to work properly. You might want to try my online training course, it has everything you need to get your business going: www.aemackintosh-onlinetraining.com/courses/pressure-washing-tools-and-techniques
@@aemackintosh I already have plans to do all your online training. Thank you for your reply. I have followed a few channels and your by far the most transparent and most helpful 😁
Hi Ash, I've just bought the Evo1, have a Mossmatic and a lovely new AEM pole - but I'm concerned that my 1/4 hose won't be enough for the 21lpm of the new Pwasher 😬
Hi ash, I have a Honda gx390 15lpm and I’m looking to get a fsc. But my gun handle is attached to my hose then I attach my lances to my gun. With a fsc do a need to get some make quick release connections or what? Cheers bud
You will need a pole conversion kit. There is a link to a video that explains more in the description. Or give Rutland Pumps a call and they will help you out.👍🏼
Excellent video mate - I’m new to your channel - just subscribed. I have a pressure washing job tomorrow - 150m2 with a Lance and 9 litres per min machine. Wish me luck! Can’t wait to get a whirl away!!
Hi, thanks for the great videos. This is probably a stupid question but is there a pump between the wheelie bin and the pressure washer or does the pressure washer pull the water in on its own.
Did you buy the turbo lance and the other lance separately? I am really looking at getting the same one. Its about £1675 from FJ Jones but not supplied with the turbo nozzle. It's the package from that comes directly from dual pumps. Any advice would be grateful. It looks a great business to get into when you have the right machine. Thanks.
I watch many exterior cleaners and your the best out there !! could you use the 2 lever rinse jet to clean facials and soffits as well ? and do you always use chemicals on a driveway and if so which one ?
Do you have to leave the engine tick over for a while to draw water through the machine? Just wondered because using hose I never start it without the tap switched on.
HI Ashley, obviously your washer is a serious piece of kit. I looking to buy one similar. I am trying to get my head around how not to run out of water. Taking the average pressure of domestic taps is around 9 LPM and your using 21 LPM do you have to keep stopping whilst the bin fills as the water going in is way way less than you are pulling.... Thanks
Yes, occasionally you may have to stop while it fills, but that’s why you use the buffer tank like this. By the time you have done a bit of sweeping it soon fills up again. I find lots of taps often keep up with what I’m using actually.😃👍🏼
Hi, my pressure washer (pretty much same as urs)has an issue at the min, it doesnt have any pressure, water coming out but not at the rate it usually does. Have u had any similar issues before and any ideas on what to check? The hoses and gun are fine. Thanks.
I think it’s just called a twin lance. You are able to change the jets as they wear over time, so in theory you could swap them for different types of jets if you wanted to.😃👍🏼
Thanks,I did recently ask what machine you used and I am now getting the same set up as you, I nearly bought the 15lpm version but for the extra, I am now going for the 21lpm from a firm called ac pressure washers, don,t know if you have dealt with them, cheers your videos are a big help
Hi Ash, great videos very informative on the equipment and methods used. I am just starting up and got a few things in place ready to go but unsure if I need to get a waste permit for water run off into the drains on the street or some certificate from the local council.
Hi great video - looking at buying a pressure washer for about £900/£1200 where is best to buy one as would like some sort of after care or yearly service etc any info much appreciated. Happy new year
Hi buddy , still loving your vids.. do you have one on your steam pressure washing set up?? Also how do you sell this way of cleaning a roof to the customers?? I’m doing quite a few scrape and bio jobs now but the steam system looks to give a more instant wow to the roof.. trouble is down in the south here any form of pressured water on a roof is a big no no from my customers!
Hi Ashley, im looking on the rutland pump kits page. Can you tell me wich version you bought? Because they have many 21lmp versions. That would be fantastic.
It depends how much you rinse away. You will probably need more sand at first if you are new to it, but I’ve perfected my rinse so I don’t have to replace too much sand.😃👍🏼
So after having a bit more of a think I've put together a starter list... Evolution 2 (21ltr) 20 inch surface cleaner Additional 30m of hose Turbo jet lance Twin lance Upgrade to QC fittings Is there anything else that I may of missed? Tyia.
Thanks for the video!! This, with the bin for water pressure is the set up I’m thinking about! My biggest concern is, what if the customer doesn’t have a tap to use? I understand we can get our own tanks but that would be huge costs for filling and the added pipes from the van!
Just check that the customer has a tap you can use when you quote (everybody does). I also have every possible tap adapter with me in the van, including ones to fit a hose to an indoor tap, just in case.😃👍🏼
A water container is better so the machine can draw the water it needs to run properly. If the hose doesn’t flow fast enough, the machine won’t work properly because it won’t be getting enough water.😃👍🏼
Sounds great. I would stick with the ten meter hose, maybe get 15meter next time. But if they are too long it becomes a nightmare to handle. You could always get an adapter to join 2 hoses together for the big jobs, but 10/15 meter will be enough for most domestic jobs.😃👍🏼
I have just bought a similar set up from ac pressure washers. What size litre is the bin you use to draw the water? I need that next but not sure on 50l up to 110l?
I think it’s about 100litres. I used to use a wheelie bin which was about 215 litres. That was better really, but it’s too big to get in my van now.😃👍🏼
Hi mate thank you for your videos they are very informative! I might have missed it, but where did you get your machine from and do you have any special money off codes for any websites? Cheers
It doesn’t have a pressure gauge. I try not to play with the unloaded valve as it can be a bit temperamental. I tend to adjust the pressure just by tweaking the revs up or down.😃👍🏼
Great video. Thanks a lot for sharing your experience. I am a cleaner from germany and interested in the size of your bin/buffer tank? How many litres of water fit in?
Thanks for your comments. The bin holds about 120 litres I think. Bigger the better really. I am only using this smaller bin to save space in my van. A full size wheelie bin is ideal.😃👍🏼
@@aemackintosh Thanks for answering. I have a 240 litres bin in my van (caddy), but need to save some space too. Will try a smaller one. Don't you have problems with running the 120 litres bin empty?
The pump draws the water out of the bin through its own hose. It also has a return hose going back into the bin, so it can suck up what it needs but when you take your hand off the trigger it dumps water back out that it’s not using. I put a link in the description to a video that shows more about how I set up the kit.😃👍🏼
Hello, got new gx390 but Unfortunatly i got some "cheap" pump (15l/h, 4000psi) with assume low hour endurance (after my purchase i found out).. Looking for New pump.. Mine is direct drives, if i could have your model (even if you suggest more psi), i would appriciate that 😊 also, twin Lance noozle looks nice.. Which noozle no. if i can know, for that machine and a gun? 🤭 Love your work, have learned a lot... Greetings from Croatia 👋
Also, i have ordered 14" Be whirlaway but no wheels (from uk) , do you think i will be able to work on lager areas (block/stone) floors? Im thinking about should i order 16"... So expensicve tho 😬
I am using an 18 inch flat surface cleaner with my 21litre per minute machine. It’s not just psi but litres per minute is more important to deliver cleaning power. Mine has a pump from Dual Pumps. If you get in touch with them direct or Rutland Pumps will also be able to advise you.😃👍🏼
Hi just brought this machine and fairly new to this type of work, just a quick question do you still use it when it’s raining lots may seem like a silly question but just wondered? Thanks
@@aemackintosh where can I get that machine especially the one for roof and tile machine .And it necessary to buy generator ie pamp for operating on roof what if I connect to the water source can't work
Hi Ash. I'm just starting and was going to fit tank in my van, a short wheelbase Citroen Dispatch. If I put a tank in what size should it be? Or is it best to just use a wheelie bin? Thanks
Hey there! Just wondering, would this machine be your recommendation for someone like myself who’s thinking about starting up a pressure washing business? Or could you recommend a cheaper version by a different brand perhaps? Thanks in advance.
You want to get a 21 litres per minute machine if you can. It will do a great job and last you for years. Honda engines are the best but there are some other cheaper brands out there too.👍🏼
Hi mate, love your work and great formative videos. Just wanted to reach out and take some advice with a issue I’ve recently encountered. Just bought the same machine with the same spec, after using one day I encountered an issue where when I release the trigger the engine slows down the shuts down within a few seconds. Soon as I press its fine. I did notice when I open and close the easy prime valve after a few trial and errors this issue may stop, but then. May start again. Any idea what could be causing this and if so, how to resolve it ? ‘Many thanks
Always love watching your vids and getting great advice for myself. I’m going to order a Honda gp200 150 bar 13lpm 2175psi engine will that run the whirl away 18’’ same as yours as you said 15lpm will run the whirl away? Thanks
Thanks for your comments. I think that machine sounds like it might be a bit under powered. They usually say 15lpm is the minimum you need to run a flat surface cleaner.😃👍🏼
Hi just subscribed. I was looking to start a pressure washing business in the UK as a side hustle. In the area I live people have small gardens with barely any slabs. How can I find people with bigger areas that need pressure washing done?
Hi Ashely I’m looking at purchasing a machine and equipment. What would recommend is the best machine equipment to go for? And size of surface cleaner?
Get a machine with a Honda engine, mine is 21litres per minute, 200bar/3000psi. It’s got a kick and is great, even for the most stubborn of jobs. I run an 18inch flat surface cleaner.😃👍🏼
@@aemackintosh Much appreciated Ashely. May I just ask, what’s made you get into roof cleaning? For me is very high risk, plus to do properly and safe, would need to scaffold the entire house, tile breakages , mortar coming out of the ridges etc. Just wondered why if have so much work and established?
I like the variety. Roof cleaning are the highest ticket jobs I do. It’s hard graft but sometimes I just like the challenge. I’ve found that a scaffold tower is a good way to get access recently.😃👍🏼
Your intros sound like your outros :) I bought nozzle from DA Components for softwashing as you recommended, it screws on but my goose neck is quick lock. Any suggestions?, I could tape it on everytime, don't want to send it back because the spray is perfect. Thanks again
Great video! I'm a gardener venturing into driveway and patio cleaning. I'm going for the same set-up as you have here only van based with a 40m hose so thanks for the video. I do have a question tho which I can't seem to find an answer for online so thought you might know... Do I need a certificate etc to use sodium hypochlorite? Any info would be much appreciated. Cheers J
No, seems surprising really but it’s readily available, and it’s commonly used in smaller quantities for treating swimming pool water. I would advise that you take great care with it though. All the best with your business plans. Thanks for your comments.😃👍🏼
@@aemackintosh is a van mounted cold wash system ok to use with chemicals for roof cleaning or would you advise using a separate piece of equipment and what? Regards
Hi ash, great videos! When re sanding block paved areas do you come back another time or do it the same day? Also how do you organise the days washing and sanding?
Great video! I'm thinking of starting up a jet wash business but I'm a bit put off with not getting the work. Especially around winter times. Any advise please? Thanks in advance! :)
Yeah, it is quite for pressure washing at this time of year. But gutter cleaning and roof cleaning picks up around now to balance it out. So offering those together might work for you?😃👍🏼
Im looking at getting a Hyundai from my local B&Q 15lpm 3000psi. Would this be enough to power a flat surface cleaner? And maybe the flat roof cleaner too? Great vids Ashley.
In theory yes, but I think you will actually struggle with it on some jobs. Maybe it would be ok at first, but I think why not just buy the more heavy duty machine in the first place? It will last longer and do a better job more quickly.👍🏼
It’s not so much about psi that gives you cleaning power, but perhaps the litres per minute is even more important. Most guys will be using 21 litres per minute machines. 15 is pretty decent though. But 21 you will find quicker and more effective on those tough jobs.👍🏼
Hi Ash, another great video! Could you please tell me do you just lift your pressure washer in and out of your van or do you use a ramp? I used to lift my old one but the new one is quite heavy so will need to use ramps but the only ones I can find are really bulky and will take up a lot of room in truck. Nice little Reggae beat at the start btw! 👌
Thanks! Yes, I use ramps. I showed how I get the machine out of the van in one of my recent pressure washing videos. The called: A Days Pressure Washing With No Chemicals. Or you could find it in the Pressure Washing playlist on my channel.😃👍🏼
A.E.Mackintosh Cleaning Services I thought so! I just couldn’t find it. The only ones I can find are quite big and bulky but they will have to do. At least they are sturdy. 👍
Great video Ash, just thinking as the wheelie bin doesn't fit in your van you can get all sorts of sized ridged plastic tanks that will hold more water and fit in your van. As you totched on waiting for some customers taps is a real ball ache! Maybe get another bin that way you could stack them taking up no extra room and when one bin runs dry pop your suction hose into the other bin ! Just a thought, keep up the good work. M
That looks like a very good machine/set-up. I'm using a Electric pressure washer from Kranzle. I use it Maybe 5-10 times a year. How about you? How much on average did you spend on maintenance/repair?
Thanks. The machine is so reliable, I maybe spend £50-70 doing a service once a year. Apart from that, a few running repairs like jets on the flat surface cleaner, a new pressure hose every so often, the pull cord to start it wears out after a while. Pretty standard maintenance stuff.😃👍🏼
What would the price difference be for using a customers tap, too using your own water, say on 50m2 driveway mate? Cheers liking the videos, keep up the good work.
You would need a very large tank/bowser to use your own water. I always use the customers tap so I don’t really know what the cost difference would be?
Hi Ashley. I wonder if you can help or advise me? I was using my petrol pressure on a job yesterday when suddenly my machine(exactly the same as yours) started aggressively jumping and down whilst washing. I was using the surface cleaner at the time. I quickly stopped the clean and investigated. All seemed fine. I'm no expert and still new to pressure washing The machine was working hard throughout the day with some tough weeds for at least 6 hours. The machine was fine on low pressure rinsing down so could it? 1 too much constant use? 2 the surface cleaner faulty? 3 water not getting through the pump properly? 4 filter needs cleaning/changing? 5 none of the above? Thanks
Sounds like the carburettor might be hunting? It could be dirty and need cleaning out? But I’m not sure. If I were you I would give Rutland Pumps a call and see if they can help.😃👍🏼
@@aemackintosh Thanks for the heads up, Ashley. I think your right about the carburettor. Although my surface cleaner was only running on one nozzle instead of two, which did not help. I phones a specialist company today and they said it sounds like the carb and that I may have some 'stale petrol left in the tank' I have never heard that one before.
I use a 15meter length pressure hose. I tried a 30m for a while, but it just used to get twisted up and it was more trouble than it was worth. Other than the flat surface cleaner I just have a turbo nozzle lance and a twin nozzle fan lance for rinsing, it has two wide fan jets one soft and one harder with a handle on the side that adjusts between the two. It’s great for the rinse at the end.😃👍🏼
I'm thinking of investing in a karcher pressure wassure. Ive already got a waterfed pole but its really bendy and thinking of getting Gardiner Xtreme. Do you think its better for me to get a better waterfed pole or a pressure washer?
Brilliant video but had to laugh at the flat surface cleaner as you reminded me of the triggers broom sketch. 🤣 Had this for 8 years only replaced the wheels the arm, 🤣 thanks for this video Ash really helpful
Great, thanks.😆👍🏼
Seriously can't thank you enough for the time you spent passing on your experience.
Nervous time moment to start up but have decided go for it.
Thanks again..
How u found it pal am thinking the same got me petrol pressure washer gonna make a budgit gutter sucker i think
At least you went for it, how is it going now Paul?
Excellent video.... very informative and well presented... well done and many thanks.
Thanks! I’m glad you found it useful.👍🏼
Hey! I’ve watched all your videos! I’ve been inspired over the last two years to have a go at my own Jet Washing business! So here goes for 2022! I’ve personally want to push the jet washing! Driveways, patios, concrete, tarmac etc! Walls! Thanks for your videos with advice! I will draw from your knowledge! I’ve always had a pressure washer! But now mines very similar to yours! 13HP 21LPM and I’m excited to see what the future has in store! I’ve named it “Deluxe Jet Washing NI” as I’m in Northern Ireland! 👍
That’s awesome! I’m glad you find the channel useful. I wish you all the best with your business plans.😃👍🏼
Great videos, I am looking to set my own commercial cleaning company this year and your videos have been very helpful
That’s great! I’m glad you find the channel useful. I wish you all the best with your business plans.😃👍🏼
@@aemackintosh thank you ! Any starting advice ?
Yeah, loads, I have a podcast and I even run training sessions to help people starting out.🎙😉👍🏼
Hi Ash what is the connection called that fits on to the jetwash to draw the water from the bin.
The suction hose should be fitted to your machine.👍🏼
Thank you for very informative video! Already Learned a lot from your vids! To the stars!
Where did you buy the twin lance from please
Thanks!😃👍🏼
You should try jetwash-direct.com or Rutland Pumps. It is just a lance that came with my first machine, but I’m sure you must be able to get it.😃👍🏼
@@aemackintosh www.jet-wash-direct.co.uk/
Hi. You state that you started out with a jet washer that wasn't as powerful. What was the litres per minute of your first washer if you dont mind me asking? I want to start out but i note that anything over 15lpm is quite an expense. Can you use say a 16inch surface cleaner with a 10lpm washer? Thanks Chris
Maybe, just, but I don’t think it will be worth it. I started with a 15 litres per minute machine, and it wasn’t long before I realised that I needed more power. In the long run it’s worth getting a proper machine.😉👍🏼
Hey Ash great informative video. Do you or anyone you can recommend have a video of setting up so for example connecting the hoses, starting the pressure washer etc up to the point of using it?
This will hopefully help you out:
ua-cam.com/video/Zi5RRdm7u38/v-deo.html
Our water pressure is terrible. Can I use the bin for water pressure with a regular karcher washer?
Cheers
I don’t think so.
Thanks ash. This is the video I have always wanted you to make.
Hoping next time you make one where you show how you connect them
Great! The hose from the customers tap just goes straight into the bin, and the pressure washer came with it’s hose already attached, so that just goes into the bin as well. Then the only connection you need to make is to connect your pressure hose with tool to the machine.😃👍🏼
@@aemackintosh ooooh okay then I get it. I have been seeing a lot of horse pipes. And they we're confusing me.
Simple really when you know how.😃👍🏼
Yeah
Hey ash I would like to have a direct contact to you. Like an email maybe if it's fyn with you.
Hi mate , love your videos . Very informative , looking to get into pressure washing driveways . Facias soffits , roofs etc . I want it as a side hustle , do you think it’s realistic to get a job a week on the weekends . With the competition out their , Thankyou x
It’s definitely possible. It’s all down to how you promote yourself.
@ Thankyou , thinking flyers Facebook etc
Watching all your videos helping me out greatly for starting next year I have bought a 9.2lpm 3500psi max machine will this be OK to start off with I have a 15" surface cleaners attachment that will be the only piece of kit I think I might struggle with?
Any and all your advice is greatly recieved.😊
I think you might struggle with that setup. It’s not all about the psi, most flat surface cleaners need at least 11 litres per minute to work properly.
You might want to try my online training course, it has everything you need to get your business going:
www.aemackintosh-onlinetraining.com/courses/pressure-washing-tools-and-techniques
@@aemackintosh I already have plans to do all your online training. Thank you for your reply. I have followed a few channels and your by far the most transparent and most helpful 😁
Hi Ash, I've just bought the Evo1, have a Mossmatic and a lovely new AEM pole - but I'm concerned that my 1/4 hose won't be enough for the 21lpm of the new Pwasher 😬
As long as your thermoplastic hose is rated for the amount of pressure you are using, it should be fine.👍🏼
@@aemackintosh oh that's great news. Can't wait to give this a blast 😌 thanks a lot 🙏
Hi great video 👍 is the 21 Lpm. Ok for roof cleaning as will ?
Hi ash, I have a Honda gx390 15lpm and I’m looking to get a fsc. But my gun handle is attached to my hose then I attach my lances to my gun. With a fsc do a need to get some make quick release connections or what? Cheers bud
You will need a pole conversion kit. There is a link to a video that explains more in the description. Or give Rutland Pumps a call and they will help you out.👍🏼
Excellent video mate - I’m new to your channel - just subscribed. I have a pressure washing job tomorrow - 150m2 with a Lance and 9 litres per min machine. Wish me luck! Can’t wait to get a whirl away!!
Thanks for your comments. I hope you find the channel useful. I wish you all the best with your job.😃👍🏼
Hi, thanks for the great videos. This is probably a stupid question but is there a pump between the wheelie bin and the pressure washer or does the pressure washer pull the water in on its own.
Yeah, the engine of the pressure washer drives a pump. The machine sucks up as much water as it needs.👍🏼
Did you buy the turbo lance and the other lance separately? I am really looking at getting the same one. Its about £1675 from FJ Jones but not supplied with the turbo nozzle. It's the package from that comes directly from dual pumps. Any advice would be grateful. It looks a great business to get into when you have the right machine. Thanks.
I get most of my pressure washing kit from Rutland Pumps.👍🏼
where can I get one of those 2 jet rinse hose with the rotating handle? and what is it called lol?
It’s just a twin lance. Any good pressure washing supplier should be able to get you one.👍🏼
@@aemackintosh Thanks mate
I watch many exterior cleaners and your the best out there !! could you use the 2 lever rinse jet to clean facials and soffits as well ? and do you always use chemicals on a driveway and if so which one ?
Thanks for your comments. I wouldn’t want to pressure wash soffits because you would end up blasting water into the roof space.
Do you think a machine that delivers 12lpm is suitable for both residential/commercial jobs?
Not enough power. Better to get a more powerful machine in the first place that will do a better job and last you longer.👍🏼
Why the 2 hoses coming out of the bin of water... and how long would that water last before you need to stop and wait for refill ?
One is a return hose. The machine pumps water back into the bin that it’s not using when you take your hand off the trigger.👍🏼
What do you do about litchens and black please😊
Do you have to leave the engine tick over for a while to draw water through the machine? Just wondered because using hose I never start it without the tap switched on.
Yeah. You fill a bin with water and the machine sucks up what it needs.
HI Ashley, obviously your washer is a serious piece of kit. I looking to buy one similar. I am trying to get my head around how not to run out of water. Taking the average pressure of domestic taps is around 9 LPM and your using 21 LPM do you have to keep stopping whilst the bin fills as the water going in is way way less than you are pulling.... Thanks
Yes, occasionally you may have to stop while it fills, but that’s why you use the buffer tank like this. By the time you have done a bit of sweeping it soon fills up again. I find lots of taps often keep up with what I’m using actually.😃👍🏼
I going to have to get one of those wands... Thanks for sharing!
Thanks for watching!😃👍🏼
Great video
Thanks!👍🏼
Have u got a lonl for the attachment with the handle to adjust pressure or a name for it
Hi, my pressure washer (pretty much same as urs)has an issue at the min, it doesnt have any pressure, water coming out but not at the rate it usually does. Have u had any similar issues before and any ideas on what to check? The hoses and gun are fine. Thanks.
Hey great vid I dont suppose you have tbe name of that double lance attachment
I think it’s just called a twin lance. You are able to change the jets as they wear over time, so in theory you could swap them for different types of jets if you wanted to.😃👍🏼
@@aemackintosh yeah i was just thinking that what an amazing peace of kit 👌
Thanks,I did recently ask what machine you used and I am now getting the same set up as you, I nearly bought the 15lpm version but for the extra, I am now going for the 21lpm from a firm called ac pressure washers, don,t know if you have dealt with them, cheers your videos are a big help
Sounds great. I’m glad you find my videos useful.😃👍🏼
Im going to have so many questions when i come see you Ash 😅😅
Sounds good. Looking forward to seeing you.👍🏼
Very informative video
Great. Thanks. I’m glad you found it useful.😃👍🏼
What a lovely set up, thank you so much for the information! I will be looking to purchase the same pressure washer! 👍
Nice one. It’s been a good, solid, reliable machine for many years.😃👍🏼
Why is there 2 hoses from your washer going into the water bin? I know one is to pull the water but what's the other used for?
It’s the return hose.
Is it easy to get in and out of the van? Thanks
I’ve got a good set of ramps, so it’s quite easy.👍🏼
Cover your bin is protecting your pump from fine dust ...
Thanks for all the inspiration :)
Thanks! Good tip.😃👍🏼
Hi Ash, great videos very informative on the equipment and methods used. I am just starting up and got a few things in place ready to go but unsure if I need to get a waste permit for water run off into the drains on the street or some certificate from the local council.
No, you should be fine.👍🏼
Do you always use soft wash(chemicals)before starting the pressure washing??
Not always no.
Hi great video - looking at buying a pressure washer for about £900/£1200 where is best to buy one as would like some sort of after care or yearly service etc any info much appreciated. Happy new year
I get all my pressure washing kit from Rutland Pumps.👍🏼
@@aemackintosh many 🙏 thanks
Hi buddy , still loving your vids.. do you have one on your steam pressure washing set up?? Also how do you sell this way of cleaning a roof to the customers?? I’m doing quite a few scrape and bio jobs now but the steam system looks to give a more instant wow to the roof.. trouble is down in the south here any form of pressured water on a roof is a big no no from my customers!
Not yet, I will have to do a review of the steam setup soon.👍🏼
hi. this evolution 2 is rated At 15 lpm but your one is 21lpm. did you upgrade the pump to to get 21lpm?
Check the spec before you buy.👍🏼
Hi great vids and info what do you mean by double pump are all the evolution machines double pump many thanks
Hi Ashley, im looking on the rutland pump kits page. Can you tell me wich version you bought? Because they have many 21lmp versions. That would be fantastic.
I now have a watertek from Rutland Pumps, it’s a 21 litres per minute machine with a Honda gx390 engine.👍🏼
Can you please tell me what that turbo nozzle is? what brand, where i can buy one?
Try Rutland pumps.😃👍🏼
May I ask how much sand you buy before job ? how much avg. per sqm?
It depends how much you rinse away. You will probably need more sand at first if you are new to it, but I’ve perfected my rinse so I don’t have to replace too much sand.😃👍🏼
Hi Ash, thank you for your videos here and can I ask how do u think hot water high pressure washer is better for cleaning? Cheers
Hot water has a very limited use, but there are certain situations where it is very handy.👍🏼
@@aemackintosh Thanks Ash, can I ask how much pressure when u do roof cleaning? And do u use soft wash for any tile roof cleaning, Cheers
What hose do you use to connect the flat surface cleaner to the pressure washer?
High pressure hose.
What set up would you suggest buying to start out please? I've got about 1k to spend.
Save up a bit more and buy a decent setup in spring.😃👍🏼
So after having a bit more of a think I've put together a starter list...
Evolution 2 (21ltr)
20 inch surface cleaner
Additional 30m of hose
Turbo jet lance
Twin lance
Upgrade to QC fittings
Is there anything else that I may of missed? Tyia.
Maybe a wheelie bin?😉👍🏼
Hi Ashley. Quick question. What is the name of the double jet rinsing down tool you use? The one with the twisting side handle. Thanks
It’s a twin lance.😃👍🏼
@@aemackintosh Thanks Ash
What do you do about sealing the driveway after it's cleaned and sanded?
I can apply sealant if the customer requests it. I use Resiblock.😃👍🏼
Thanks for the video!!
This, with the bin for water pressure is the set up I’m thinking about!
My biggest concern is, what if the customer doesn’t have a tap to use?
I understand we can get our own tanks but that would be huge costs for filling and the added pipes from the van!
Just check that the customer has a tap you can use when you quote (everybody does). I also have every possible tap adapter with me in the van, including ones to fit a hose to an indoor tap, just in case.😃👍🏼
@@aemackintosh this was my thought process, guess I’m just worried about that ‘one’ customer 😂😂 thank you!!
@@aemackintosh also if you don’t mine me asking. What size van do you use?
I am using a VW Transporter. There is more about my van on my channel.😃👍🏼
Can you plug a hose pipe straight into this pressure washer or do you need a water container to draw water from? 👍
A water container is better so the machine can draw the water it needs to run properly. If the hose doesn’t flow fast enough, the machine won’t work properly because it won’t be getting enough water.😃👍🏼
@@aemackintosh cheers bud, I've just received my evolution 2 washer and whirl away. Did you stick with the 10 mtr hose or upgrade to a bigger one? 👍
Sounds great. I would stick with the ten meter hose, maybe get 15meter next time. But if they are too long it becomes a nightmare to handle. You could always get an adapter to join 2 hoses together for the big jobs, but 10/15 meter will be enough for most domestic jobs.😃👍🏼
@@aemackintosh thanks mate 👍
Hi . What mean UR25 rotating head 030 jet . This numbers go from 030 to 080 what that mean ? Regards
Dmitrij F I think that’s referring to the type of fan jets you are using.
@@aemackintosh ok
I have just bought a similar set up from ac pressure washers. What size litre is the bin you use to draw the water? I need that next but not sure on 50l up to 110l?
I think it’s about 100litres. I used to use a wheelie bin which was about 215 litres. That was better really, but it’s too big to get in my van now.😃👍🏼
Hi mate thank you for your videos they are very informative! I might have missed it, but where did you get your machine from and do you have any special money off codes for any websites? Cheers
Rutland Pumps are very helpful. I don’t have a discount though I’m afraid.
Do you have pressure gauge on yours or is there no need? Do you use the unloader valve much at all?
It doesn’t have a pressure gauge. I try not to play with the unloaded valve as it can be a bit temperamental. I tend to adjust the pressure just by tweaking the revs up or down.😃👍🏼
Great video. Thanks a lot for sharing your experience. I am a cleaner from germany and interested in the size of your bin/buffer tank? How many litres of water fit in?
Thanks for your comments. The bin holds about 120 litres I think. Bigger the better really. I am only using this smaller bin to save space in my van. A full size wheelie bin is ideal.😃👍🏼
@@aemackintosh Thanks for answering. I have a 240 litres bin in my van (caddy), but need to save some space too. Will try a smaller one. Don't you have problems with running the 120 litres bin empty?
Sometimes, that’s why a bigger bin can be better. But it depends on the flow from the tap you are using.😃👍🏼
What do u just drop a garden hose in the bucket? And hook it up to pump
The pump draws the water out of the bin through its own hose. It also has a return hose going back into the bin, so it can suck up what it needs but when you take your hand off the trigger it dumps water back out that it’s not using. I put a link in the description to a video that shows more about how I set up the kit.😃👍🏼
Thanks alot great videos
Hello, got new gx390 but Unfortunatly i got some "cheap" pump (15l/h, 4000psi) with assume low hour endurance (after my purchase i found out).. Looking for New pump.. Mine is direct drives, if i could have your model (even if you suggest more psi), i would appriciate that 😊 also, twin Lance noozle looks nice.. Which noozle no. if i can know, for that machine and a gun? 🤭 Love your work, have learned a lot... Greetings from Croatia 👋
Also, i have ordered 14" Be whirlaway but no wheels (from uk) , do you think i will be able to work on lager areas (block/stone) floors? Im thinking about should i order 16"... So expensicve tho 😬
I am using an 18 inch flat surface cleaner with my 21litre per minute machine. It’s not just psi but litres per minute is more important to deliver cleaning power. Mine has a pump from Dual Pumps. If you get in touch with them direct or Rutland Pumps will also be able to advise you.😃👍🏼
Do you use the customers tap to keep a constant flow of water?
Yes, it’s best just to ask them first, but it’s never a problem.😃👍🏼
Hi just brought this machine and fairly new to this type of work, just a quick question do you still use it when it’s raining lots may seem like a silly question but just wondered? Thanks
In light rain showers I will try to keep goi, but not if it’s raining hard and constant.😬
Hello, will a pressure washer that is 10 Litres per minute run a 18" surface cleaner?
Maybe, just? I think you might need one more powerful though.
Do these machines have q/r ? Are they brass fitting or stainless?
I mostly use the brass M22 screw fittings.😃👍🏼
Hi, so does the customer have to have an outside tap for you to carry out a driveway?
It does help.😃👍🏼
@@aemackintosh where can I get that machine especially the one for roof and tile machine .And it necessary to buy generator ie pamp for operating on roof what if I connect to the water source can't work
Hi ash what type of grease do you use for your surface cleaner ? Thanks
Hi Ash. I'm just starting and was going to fit tank in my van, a short wheelbase Citroen Dispatch. If I put a tank in what size should it be? Or is it best to just use a wheelie bin? Thanks
I wheelie bin is ideal for pressure washing as you can move it to wherever you position the pressure washer.😃👍🏼
thanks Ash much apppreciated
Hey there!
Just wondering, would this machine be your recommendation for someone like myself who’s thinking about starting up a pressure washing business? Or could you recommend a cheaper version by a different brand perhaps?
Thanks in advance.
You want to get a 21 litres per minute machine if you can. It will do a great job and last you for years. Honda engines are the best but there are some other cheaper brands out there too.👍🏼
@@aemackintosh thanks for getting back to me so quickly! Looking forward to watching more of your videos. 👍🏼
Hi mate, love your work and great formative videos. Just wanted to reach out and take some advice with a issue I’ve recently encountered. Just bought the same machine with the same spec, after using one day I encountered an issue where when I release the trigger the engine slows down the shuts down within a few seconds. Soon as I press its fine. I did notice when I open and close the easy prime valve after a few trial and errors this issue may stop, but then. May start again. Any idea what could be causing this and if so, how to resolve it ? ‘Many thanks
Check that you haven’t got the choke on. Or if it’s not that, maybe try giving Rutland Pumps a call, I’m sure they will be able to help.😃👍🏼
Always love watching your vids and getting great advice for myself.
I’m going to order a Honda gp200 150 bar 13lpm 2175psi engine will that run the whirl away 18’’ same as yours as you said 15lpm will run the whirl away? Thanks
Thanks for your comments. I think that machine sounds like it might be a bit under powered. They usually say 15lpm is the minimum you need to run a flat surface cleaner.😃👍🏼
GetThor black series they put out 41lpm what takes this getter most of the day u would be in and out in 2 half hours on to the next one .
Hi just subscribed. I was looking to start a pressure washing business in the UK as a side hustle. In the area I live people have small gardens with barely any slabs. How can I find people with bigger areas that need pressure washing done?
Maybe you could get some smart leaflets done and approach some bigger properties?😃👍🏼
@@aemackintosh great idea. I guess I’ll just have to leave my local area for jobs. Thanks
Call great video 👍
Thanks 😃👍🏼
Hi ash, would you mind telling me what size turbo nozzle you used? Great video by the way. Cheers
I’m not sure what size it is to be honest. It’s a pretty standard turbo nozzle. Possibly a 1.25mm, rings a bell.😃👍🏼
Hi, do you just use Sodium hypochlorite on jobs? Or do you use/recommend any other products to use
I normally use hypo to remove stubborn organic growth.😃👍🏼
Hey Ash, can you recommend a pre treatment for resin driveways ?? Cheers
I haven’t tested enough to have an answer for you, but I’ve seen some guys using a softwash as a pre treatment.😃👍🏼
Jay's fluid
Where can I get the rinse lance from ?
My surface cleaner doesnt remove dirt as good as that. Great videos
You should be able to get a twin Lance from Rutland Pumps or AC Pressure Washers.😃👍🏼
Great vid! Thanks
I’m glad you found it useful. Thanks for your comments.😃👍🏼
Hi Ashely
I’m looking at purchasing a machine and equipment. What would recommend is the best machine equipment to go for? And size of surface cleaner?
Get a machine with a Honda engine, mine is 21litres per minute, 200bar/3000psi. It’s got a kick and is great, even for the most stubborn of jobs. I run an 18inch flat surface cleaner.😃👍🏼
@@aemackintosh
Much appreciated Ashely.
May I just ask, what’s made you get into roof cleaning? For me is very high risk, plus to do properly and safe, would need to scaffold the entire house, tile breakages , mortar coming out of the ridges etc. Just wondered why if have so much work and established?
I like the variety. Roof cleaning are the highest ticket jobs I do. It’s hard graft but sometimes I just like the challenge. I’ve found that a scaffold tower is a good way to get access recently.😃👍🏼
Your intros sound like your outros :) I bought nozzle from DA Components for softwashing as you recommended, it screws on but my goose neck is quick lock. Any suggestions?, I could tape it on everytime, don't want to send it back because the spray is perfect. Thanks again
You need a goose neck with a euro screw fitting. I think DA Components will probably help you if you give them a call.😃👍🏼
@@aemackintosh thank you appreciate it.
wait, you use metrics for liquid volume but imperial for pressure force ?
😆 Yes it’s strange. We also seem to talk about water fed window cleaning poles in feet, but the hose in meters!🤪👍🏼
@@aemackintosh then choose one XD
be a civilized person an use metrics like every civilized person in the world ;)
Where do you recommend I buy a pressure washer from in the UK? Can’t seem to find a Honda engine anywhere online
www.rutlandpumps.com/
😃👍🏼
@@aemackintosh they awful at replying to emails
Great video like always. Where you buy Lance with double end for rinsing?
I got that lance with my first pressure washer. I think it was jet-washdirect.com or you might also want to try Rutland pumps?😃👍🏼
Great video! I'm a gardener venturing into driveway and patio cleaning. I'm going for the same set-up as you have here only van based with a 40m hose so thanks for the video. I do have a question tho which I can't seem to find an answer for online so thought you might know... Do I need a certificate etc to use sodium hypochlorite? Any info would be much appreciated.
Cheers J
No, seems surprising really but it’s readily available, and it’s commonly used in smaller quantities for treating swimming pool water. I would advise that you take great care with it though. All the best with your business plans. Thanks for your comments.😃👍🏼
@@aemackintosh brilliant thanks 👍
How did you find it, was it easy to get into?
Hi , great video where do you get your chemical supplies from ? Thanks .
bonnymans.com is good for buying chemicals in bulk.😃👍🏼
Is the Honda pressure washer ok to use in the rain?
Yeah, I try to carry on with this kind of thing in light rain. It’s always been ok.😎👍🏼
@@aemackintosh is a van mounted cold wash system ok to use with chemicals for roof cleaning or would you advise using a separate piece of equipment and what? Regards
Once you put a chemical in your tank it’s difficult to wash out again for pure water cleaning, so I prefer to use a separate system.😃👍🏼
@@aemackintosh OK cool. What system is best to use for chemicals? Ps thanks for answering my queries
Hi ash, great videos! When re sanding block paved areas do you come back another time or do it the same day? Also how do you organise the days washing and sanding?
You have to wait for the paving to fully dry out before re-sanding, so yeah, I normally do this on a different day.😃👍🏼
@@aemackintosh thank you very much! 👍🏻
Great video! I'm thinking of starting up a jet wash business but I'm a bit put off with not getting the work. Especially around winter times. Any advise please? Thanks in advance! :)
Yeah, it is quite for pressure washing at this time of year. But gutter cleaning and roof cleaning picks up around now to balance it out. So offering those together might work for you?😃👍🏼
Hi mate whats the double nozzled lance you use for washing down called please
I don’t really know what it’s called to be honest. It just came with the first machine I bought.😃👍🏼
@@aemackintosh thanks for the reply il have a good look round on internet for one . Thanks alot
Great video Ash,what camera are using for all videos ?
thanks
Thanks. I use a GoPro.😃👍🏼
Im looking at getting a Hyundai from my local B&Q 15lpm 3000psi. Would this be enough to power a flat surface cleaner? And maybe the flat roof cleaner too? Great vids Ashley.
In theory yes, but I think you will actually struggle with it on some jobs. Maybe it would be ok at first, but I think why not just buy the more heavy duty machine in the first place? It will last longer and do a better job more quickly.👍🏼
@@aemackintosh sorry I should have said 4000psi but I guess your answer is still the same. Thank you so much. Very helpful.
It’s not so much about psi that gives you cleaning power, but perhaps the litres per minute is even more important. Most guys will be using 21 litres per minute machines. 15 is pretty decent though. But 21 you will find quicker and more effective on those tough jobs.👍🏼
@@aemackintosh Thanks so much Ashley. You are the man. 👍👍
Hi Ash, another great video! Could you please tell me do you just lift your pressure washer in and out of your van or do you use a ramp? I used to lift my old one but the new one is quite heavy so will need to use ramps but the only ones I can find are really bulky and will take up a lot of room in truck. Nice little Reggae beat at the start btw! 👌
Thanks! Yes, I use ramps. I showed how I get the machine out of the van in one of my recent pressure washing videos. The called: A Days Pressure Washing With No Chemicals. Or you could find it in the Pressure Washing playlist on my channel.😃👍🏼
A.E.Mackintosh Cleaning Services I thought so! I just couldn’t find it. The only ones I can find are quite big and bulky but they will have to do. At least they are sturdy. 👍
Great video Ash, just thinking as the wheelie bin doesn't fit in your van you can get all sorts of sized ridged plastic tanks that will hold more water and fit in your van. As you totched on waiting for some customers taps is a real ball ache! Maybe get another bin that way you could stack them taking up no extra room and when one bin runs dry pop your suction hose into the other bin ! Just a thought, keep up the good work. M
Not a bad idea. Nice one. Thanks!😃👍🏼
That looks like a very good machine/set-up. I'm using a Electric pressure washer from Kranzle. I use it Maybe 5-10 times a year. How about you? How much on average did you spend on maintenance/repair?
Thanks. The machine is so reliable, I maybe spend £50-70 doing a service once a year. Apart from that, a few running repairs like jets on the flat surface cleaner, a new pressure hose every so often, the pull cord to start it wears out after a while. Pretty standard maintenance stuff.😃👍🏼
Hi Ash, do you always use the water from the clients outside tap or do you supply that yourself. Great videos
I always use the customers tap. Just check with them first to make sure it’s ok.😃👍🏼
What would the price difference be for using a customers tap, too using your own water, say on 50m2 driveway mate? Cheers liking the videos, keep up the good work.
You would need a very large tank/bowser to use your own water. I always use the customers tap so I don’t really know what the cost difference would be?
Hi Ashley. I wonder if you can help or advise me? I was using my petrol pressure on a job yesterday when suddenly my machine(exactly the same as yours) started aggressively jumping and down whilst washing. I was using the surface cleaner at the time. I quickly stopped the clean and investigated. All seemed fine. I'm no expert and still new to pressure washing
The machine was working hard throughout the day with some tough weeds for at least 6 hours. The machine was fine on low pressure rinsing down so could it?
1 too much constant use?
2 the surface cleaner faulty?
3 water not getting through the pump properly?
4 filter needs cleaning/changing?
5 none of the above?
Thanks
Sounds like the carburettor might be hunting? It could be dirty and need cleaning out? But I’m not sure. If I were you I would give Rutland Pumps a call and see if they can help.😃👍🏼
@@aemackintosh Thanks for the heads up, Ashley. I think your right about the carburettor. Although my surface cleaner was only running on one nozzle instead of two, which did not help. I phones a specialist company today and they said it sounds like the carb and that I may have some 'stale petrol left in the tank' I have never heard that one before.
Hi quick question how long is your hose for the washer to the lance and what fittings do you use for the ends
I use a 15meter length pressure hose. I tried a 30m for a while, but it just used to get twisted up and it was more trouble than it was worth. Other than the flat surface cleaner I just have a turbo nozzle lance and a twin nozzle fan lance for rinsing, it has two wide fan jets one soft and one harder with a handle on the side that adjusts between the two. It’s great for the rinse at the end.😃👍🏼
Where is the best place to buy hoses from?
Great set up. Do you just connect hose from outside tap to your bin? Cheers
Yes.😃👍🏼
I'm thinking of investing in a karcher pressure wassure. Ive already got a waterfed pole but its really bendy and thinking of getting Gardiner Xtreme. Do you think its better for me to get a better waterfed pole or a pressure washer?
Save up and buy a decent petrol powered pressure washer.😃👍🏼
Quick question, where did you get that lance from budd?
It came with my machine, the one I had before this actually. I think I got it from jet-washdirect.com 😃👍🏼