So to do multiple you program one you just did then the new one right after. Program Remote(s) PRESS and HOLD both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote. RELEASE the buttons on the remote. Program Additional Remote(s) WITHIN 1 minute, REPEAT Step 5 on all additional remotes, including working ones, to be programmed to the vehicle.
@thatfishingdude9356 Step 5 was the first part you don't want to press both sets at the same time you do one then after it cycles the locks do the next one Program Remote(s) PRESS and HOLD both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote. RELEASE the buttons on the remote.
You do have to jump the 2 it puts it into program mode the locks don't normally cycle when you turn the key on. If that was the case anyone walking by could program a fob to your car.
@@johnwagner4559 oh an 03 is the next generation this method only works to a 99 lesabre. From what I have read the newer ones don't have an on board way to program a fob and you need a scanner to program a new fob.
manuel, si te equivocas a la hora de elegir correctamente los puertos haces corto y te llevas los fusibles, tienes que contar bien cual es el 4 y el 8 si te confundes puedes hasta danzar la computadora, lo primero es que se te van fusibles que alimentan el rele del arranque a mi me paso por que me equivoque de puertos.
Great video, nicely explained and works perfectly , thanks
Very useful info and seems straightforward. Thanks
Thanks
i bought one of these fobs from auto zone specifically for my 97 lesabre but it never came with one. will it still work?
Would I do this on a 1999 Pontiac Bonneville SE?
Gracias
Very hepful and great information to share
Did this an won't let me program more then 1 fob?
So to do multiple you program one you just did then the new one right after.
Program Remote(s)
PRESS and HOLD both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote. RELEASE the buttons on the remote.
Program Additional Remote(s)
WITHIN 1 minute, REPEAT Step 5 on all additional remotes, including working ones, to be programmed to the vehicle.
@@PastPreserver what is step 5? I tried both at once and it erased the 1st one programed
@thatfishingdude9356 Step 5 was the first part you don't want to press both sets at the same time you do one then after it cycles the locks do the next one Program Remote(s)
PRESS and HOLD both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by cycling the door locks LOCK / UNLOCK to signal successful programming of the remote. RELEASE the buttons on the remote.
@@thatfishingdude9356 don't forget to take the jumper out before trying the fobs out
@PastPreserver ok thanks so much I got it that time ..both fpbs are programmed an working
My car didn’t have a number 8 pin with the sliver thing
Same here, please let me know if you find a solution.. I will do the same!
Will it work on a 94 lesabre ?
Thanks a lot
First, you don't need the 📎 at all...just do the lock, unlock step..
You do have to jump the 2 it puts it into program mode the locks don't normally cycle when you turn the key on. If that was the case anyone walking by could program a fob to your car.
@@PastPreserver Even on a 03 lesabre?
@@johnwagner4559 oh an 03 is the next generation this method only works to a 99 lesabre. From what I have read the newer ones don't have an on board way to program a fob and you need a scanner to program a new fob.
Mine is a 1999 Buick LeSabre. Didn’t work. Now my radio wont work nor my climate control console. Please help?
That's not good maybe check the fuses un hook the battery and reconnect it. Hadn't read anything on that happening.
@@PastPreserver you don't do it correctly.. it worked on mine
manuel, si te equivocas a la hora de elegir correctamente los puertos haces corto y te llevas los fusibles, tienes que contar bien cual es el 4 y el 8 si te confundes puedes hasta danzar la computadora, lo primero es que se te van fusibles que alimentan el rele del arranque a mi me paso por que me equivoque de puertos.