support our great sponsors who help make these builds possible...but this one is seriously helpful if you're trying to learn anything creative without spending a ton of $$$$ making videos, photography etc.
throtl people watch for the RX-7 not for You or your fucking beard! You work on the filming while everyone else does the working on your car. Stfu and stop wasting video posts with bullshit videos like this one. Like yeaterday and every video since the engine assembly!!
You should consider trying to retrobrite those yellowed plastics. Its done on old computer plastics all the time. Will it work for your paticular application, I'm not sure, but hey it may be worth a shot...
Original owner of a 1994 -- US spec. stock FD chiming in. Regarding the Mazda and RX-7 badges, both of mine are on the right side with one on top of the other, slightly offset IIRC. I'm not saying one way is better than another, but that's how mine came from the factory. Beautiful car you have there!!
My car also had body parts and trims that many people say go bad frequently. What I found was that when I am very gentle with them, mine lasted forever. I am sure Mickey will treat his car very delicately, especially parts that often break or wear out prematurely.
That turbosmart box that was on the table has a lpn sticker like the ones that we put on our parts at my job. Mind me asking where you got it from. It was on the table when you showed us the release cable for the gas door. Keep up the good work throtl. Love y’all channel!! 👍🏻👍🏻👍🏻
Steps to Whiten the Plastic: Begin by protecting yourself with rubber gloves and goggles. Fill the bucket with hydrogen peroxide. Add ¼ teaspoon of Oxy laundry booster for each gallon of peroxide. If the items can be soaked, place them into the solution and allow them to soak. If they cannot be soaked, wet a paper towel with the solution, squeeze it out so that it’s not dripping, flatten it out again, and press it against the item. It should stick in place on it’s own, but if not, you can cover it with plastic wrap and tape the plastic wrap in place. The soaking time will vary with most pieces whitening in 2-6 hours. The mixture will last for up to four days before it needs to be replaced. Retr0Bright has also developed a way to make this into a gel that can be spread onto the plastic. This is especially helpful for larger items. Set the items under a UV light or out in the sunshine. When the item has reached the desired whiteness, remove and rinse thoroughly to remove any remaining cleaning product residue. If necessary, wash with dish detergent and water.
Mickey since you can't replace that reservoir you should try using some salon care volume 40 on the yellow plastic and putting it in the sun helps a ton of plastics return to a clear or white finish. Cars coming along can't wait till you got it up and purring
Hi guys, I've been watching your vids lately and I must say you're awesome. All that passion, work and effort you put in the thing you like is incredible. Keep up the good work and stay safe on the road. Piece from Greece)
Lmao when it goes grey on Mickey “when they ask you how you’re doing and you have to say you’re fine.. even though you’re not fine” ..so perfect.. loving the videos guys.
Maybe you can 3D print the yellowed part that’s not produced anymore (and that you don’t want to be reminded of). It should be possible. Just a thought. Keep up the great work. Can’t wait to see it finished. When I get mine, I’m bringin it to you to get hooked up. Just giving you a heads up.
Hey Mickey have you tried deoxidizing the yellow plastic? I'm familiar with a couple of products including Salon Care 40 or Seaglow that are mostly used for removing the yellowing off rubber on vintage Jordans, but I have seen it used on plastic before. One instance I've seen it used is on the plastic panel of bathroom exhausts that have turned yellow. Results may vary, but I would give it a shot if it's something that bothers you.
Fender mirrors going to plug right up? Clarence for the actual connectors? 8:34 noway they tuck down into the fender... 8:44 dont see how they are going to fit back up in the mirror either... Never doubt you guys more curious about the HOW. Keep it up, im looking at getting a nsx and going straight MICKspec!
Haha just started binge watching your build today and i was down when i watched the last video from yesterday , and i jumped over to a swedish channel and i see this in recommended :D
For the yellowing of the tank, maybe get one cheap and try to retro-bright it like old game consoles? I wouldn't try it on your good part, just in case.
i dont know if it would work on that yellow tank but i restore discolored legos. to do so we soak them in peroxide in direct sunlight for quite a long time. thought i would throw that out there maybe you try maybe you already know if it works or not. great progress car looks amazing.
is there no way to get a 3D printed replacement that could work? im sure you could reach out to some one and get one made up to try replace the yellow looking one.
Try using hydrogen peroxide and wrapping the plastic part with cling wrap and leave it in the sun for a while and the part will look white again. Make sure to rinse the part thoroughly
OMG!!! Thank God I'm not the only one that feels like that every one else is dick riding!!!! But we will see how it turns out at the end it might look good!!!😒
I love the fender mirrors. Although I would have liked to have seen them in some kind of black, glossy, semi, or even flat. Keep up the awesome work brother!
These are SUPER RAD!!!! 200 2 Free Month Trials! The first 200 people to click this link will get 2 months of Skillshare for free: skl.sh/throtl
support our great sponsors who help make these builds possible...but this one is seriously helpful if you're trying to learn anything creative without spending a ton of $$$$ making videos, photography etc.
Amen
Try to Retrobright the power steering reservoir with hydrogen peroxide to get it more white again?
throtl people watch for the RX-7 not for You or your fucking beard! You work on the filming while everyone else does the working on your car. Stfu and stop wasting video posts with bullshit videos like this one. Like yeaterday and every video since the engine assembly!!
sintwoOone damn man just don’t watch then, wait until the next vid.
Yall saw mini snoop in the vid..vids getting better and better
You should consider trying to retrobrite those yellowed plastics. Its done on old computer plastics all the time. Will it work for your paticular application, I'm not sure, but hey it may be worth a shot...
Original owner of a 1994 -- US spec. stock FD chiming in. Regarding the Mazda and RX-7 badges, both of mine are on the right side with one on top of the other, slightly offset IIRC. I'm not saying one way is better than another, but that's how mine came from the factory. Beautiful car you have there!!
LMAO did anyone notice the awkward high fist bump at the end?
Rico Barrera i was gonna say the same thing lmao
lol ya
This is exactly how I do handshakes, Mickey fuckin gets me
lol ya takeing charity tae . mickey spec my arse
Its awesome seeing blue n white labels for your fd, I luv buying oem rx7 parts
8:06 bottom left corner, Snoop
Thank god! I'm watching this blazed and thought it was me 😂😂😂
My car also had body parts and trims that many people say go bad frequently. What I found was that when I am very gentle with them, mine lasted forever. I am sure Mickey will treat his car very delicately, especially parts that often break or wear out prematurely.
Gonna stock up on every OEM JDM part available and hold them for years
Just like stock market
Buy low Sell High
Supply And Demand
That turbosmart box that was on the table has a lpn sticker like the ones that we put on our parts at my job. Mind me asking where you got it from. It was on the table when you showed us the release cable for the gas door. Keep up the good work throtl. Love y’all channel!! 👍🏻👍🏻👍🏻
Steps to Whiten the Plastic:
Begin by protecting yourself with rubber gloves and goggles.
Fill the bucket with hydrogen peroxide.
Add ¼ teaspoon of Oxy laundry booster for each gallon of peroxide.
If the items can be soaked, place them into the solution and allow them to soak. If they cannot be soaked, wet a paper towel with the solution, squeeze it out so that it’s not dripping, flatten it out again, and press it against the item. It should stick in place on it’s own, but if not, you can cover it with plastic wrap and tape the plastic wrap in place.
The soaking time will vary with most pieces whitening in 2-6 hours. The mixture will last for up to four days before it needs to be replaced. Retr0Bright has also developed a way to make this into a gel that can be spread onto the plastic. This is especially helpful for larger items.
Set the items under a UV light or out in the sunshine.
When the item has reached the desired whiteness, remove and rinse thoroughly to remove any remaining cleaning product residue.
If necessary, wash with dish detergent and water.
Mickey since you can't replace that reservoir you should try using some salon care volume 40 on the yellow plastic and putting it in the sun helps a ton of plastics return to a clear or white finish. Cars coming along can't wait till you got it up and purring
Skip to 2:40 when ad comes on
YoboyRickdog lol thx bro 🤣🤣🤣
“What up throtl boys...” SKIP
Hi guys, I've been watching your vids lately and I must say you're awesome. All that passion, work and effort you put in the thing you like is incredible. Keep up the good work and stay safe on the road. Piece from Greece)
Watching you build this car from basically the ground up is so cool it almost makes me feel like it’s my own project car
You are a blessed man Mick. Rx7 is turning out awesome and the color is absolutely stunning! Keep it up brotha!
It’s cool to see everyone different take on builds
Lmao when it goes grey on Mickey “when they ask you how you’re doing and you have to say you’re fine.. even though you’re not fine” ..so perfect.. loving the videos guys.
Maybe you can 3D print the yellowed part that’s not produced anymore (and that you don’t want to be reminded of). It should be possible. Just a thought. Keep up the great work. Can’t wait to see it finished. When I get mine, I’m bringin it to you to get hooked up. Just giving you a heads up.
Loving this content mickey! Keep it up. Love from here in aus!
Oem parts get more rare by the day
Is that a paint reaction around the gas door?
Getting oem parts for an old Japanese car is so satisfying
You guys need those cover that go over the fenders while you guys work
The red on this is beautiful! 😭❤ my heart! 🤙
13:42 What are you doing Micky 😂
Made a fool of that guy .
For the Yellowed plastic, use sneaker sole re-icer!!!!! makes all yellowed plastic/rubber look icey white again
Hey Mickey have you tried deoxidizing the yellow plastic? I'm familiar with a couple of products including Salon Care 40 or Seaglow that are mostly used for removing the yellowing off rubber on vintage Jordans, but I have seen it used on plastic before. One instance I've seen it used is on the plastic panel of bathroom exhausts that have turned yellow. Results may vary, but I would give it a shot if it's something that bothers you.
Love the little Snoop Dogg dancing in the corner. Lol
Big ups to Alex for coming through with them FIRE OEM Parts!!!
I love this build bro, everything you’re doing is awesome! 👏🏽
When we don't get to see you work I know we all love to see the new parts that are coming next for the RX-7.
Fender mirrors going to plug right up? Clarence for the actual connectors? 8:34 noway they tuck down into the fender... 8:44 dont see how they are going to fit back up in the mirror either...
Never doubt you guys more curious about the HOW.
Keep it up, im looking at getting a nsx and going straight MICKspec!
i think the fender mirrors are choice that my favorite mod thus far
Haha just started binge watching your build today and i was down when i watched the last video from yesterday , and i jumped over to a swedish channel and i see this in recommended :D
Paint the bottle that they don't make anymore Black. It's done all the time and looks super clean,
Hey Mikey, to take the yellow out of the reservoir try Salon Care 40 then wrap in plastic wrap and place in the sun or under a UV light.
I like the mirrors on the fender honestly
I Probably will hate the fender mirrors
*But i always support you Mickey
Fender mirrors are awesome.
Looks so clean without the badges.
Could you use retrobright on your plastic yellow piece to get it back to original color?
That raptor looks so good.
For the yellowing of the tank, maybe get one cheap and try to retro-bright it like old game consoles? I wouldn't try it on your good part, just in case.
Love this car,it’s going to be amazing when it on the road
i dont know if it would work on that yellow tank but i restore discolored legos. to do so we soak them in peroxide in direct sunlight for quite a long time. thought i would throw that out there maybe you try maybe you already know if it works or not. great progress car looks amazing.
try to sea glow the part to make it white again
leo marvin capili this is what shoe guys do to fix yellowing of plastic
Sneaker head
Love the fender mirrors!
is there no way to get a 3D printed replacement that could work? im sure you could reach out to some one and get one made up to try replace the yellow looking one.
You going to hit that paint job up with that ceramic coating kit to keep that paint fresh
Try using hydrogen peroxide and wrapping the plastic part with cling wrap and leave it in the sun for a while and the part will look white again. Make sure to rinse the part thoroughly
It is great to have new content everyday about this awesome FD! btw anyone can tell what is the background song? 7:18
I don't care what anybody say I've said it once & I'm going to keep saying it I love those rims on the FD'S they look sick!!!
2 days in a row!!! I love you
The Mazda is finally taking shape it seems like nice job Mickey and the gang.✌
Why not fab a cover to match motor to cover the power steering tank?
we'll see if the fender mirrors look good I mean they only look good on classics like the s30z
Love fender mirrors!
Couldnt you paint the ps tank black to make it look a little better?
That reservoir that is now yellowed could be dyed black. Would probably look better than yellow if if it's not oem.
What’s a throtl video without the beard and the Mazda.
Can you address your wheels for the rx7. I know you mentioned you were getting some
Hey mickey, you could use a Non Oem Power steering fluid container out of aluminium, like the krc racing ones
When you said “Don’t ever point it out” you looked like you were ready to throw the hands 😂😂😂😂
I honestly don't like adding the mazda badge to the car, even the RX-7 but the rest of the car is awesome!
Have you ever tried to use hydrogen peroxide on yellowed plastic? I think it would work really well.
13:44 handshake lol😂
can't wait to see the wheels ur going to put on the RX7 Mickey keep these videos coming u guys just sayin what's up Evan can't leave u out brofessor
I love your build but I don't feel like the fender mirrors are going to work
OMG!!! Thank God I'm not the only one that feels like that every one else is dick riding!!!! But we will see how it turns out at the end it might look good!!!😒
IT BETTER! The holes are drilled boys, the deed is done.
@@gsmayhen5179 The holes can be refilled again 🤷🏼
The RX-7 is really coming along.
Regarding that yellow ugly tank, have you considered spraying it white with plastic-coat Mickey?
I love the fender mirrors oml😂🙏🙏🙏🙏
Micky did you get to look at the reservoir?
Alex's shirt is pretty cool...I like it.
Are you keeping the 19s on the fd?
I have to say it... congrats on the build.
but it bugged me the fact you didnt clean the windshield before placing the new cover lol
Mickey! Lete have your old throtl body, tps sesnor, and upper and lower intake manifold. Ill pay shipping or could pick it up. I need them for my FD
Where do you buy in these OEM parts?
Though you might have wiped the Mickeyspec off the window first! This FD is going to look mean!
this may be a dumb question.. but i want to order OEM parts for my mazda. how do i do that online? if i can.
Hell yeah brother!!
What are those spots on the fenders??
Cant wait 2 here ur rx7 howl
The fender mirrors killed it for me but I feel Mikey will make me love it
Micky**
Those mirrors are 😍😍😍
#savethebrap
Put salon care 40 in the faded white part. Wrap it in saran wrap and let it sit in the sun
Thanks for the video, Mickey I think the side mirrors will look awesome.
You should paint the mirrors black they would look way better
notfication gang!!!! keep up the hard work throtl fam
Correct me if I'm wrong but the Mazda badge go on the left and the RX-7 badge goes on the right.
All that truly matters when You build a vehicle is if You like the finished product.... #yolo#ftw#Dowork
That arm rest was my old one I sent back. Didn't like the defects on top.
I like the mirrors but i would prefer ganadors
Mickey that bottle you can't get have you thought about getting one 3D printed if it is possible.
is the wrx still available? seems like the guy didnt want it!
YEEE more FD!
Your gonna hate them fender mirrors...
Weres your shop located?
Dude.. he came in clutch with those oem parts lol
I love the fender mirrors. Although I would have liked to have seen them in some kind of black, glossy, semi, or even flat. Keep up the awesome work brother!