Jeep Compass (2019) - New Battery Install
Вставка
- Опубліковано 29 вер 2024
- Learn how to install a new 12V battery in a Jeep Compass. We’ll show you how to replace/change/remove with simple tips and tricks to help get you started!
Tool List: 10mm wrench, 13mm wrench, Phillips screwdriver
Click this link to determine which battery your vehicle needs: www.autobatter...
The 12 volt battery in this 2019 Jeep Compass is located under the hood. It was replaced with an OPTIMA high performance battery. Although this video may provide you with the basic procedures, we recommend that you check with the vehicle manufacture's step by step procedures found in service/repair manuals for the vehicle you are working on.
Even if your vehicle did not come with an AGM battery, you can upgrade to an AGM battery for up to 2x the life. AGM can be found at most retail outlets. You can learn more about AGM here: www.autobatter...
The use of a memory saving procedure will keep the memory alive on the vehicle's computer during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer's requirements. • Vehicle Memory Saving ...
Some late model vehicles must have the 12 volt battery registered with the vehicle's Battery Control Module or Computer after replacement. See these videos on Battery registration and coding for more details on the procedures at • Battery Registration w... & • Battery Registration &...
Always wear safety glasses and gloves when working with or near batteries.
I remember when it was simple remove 2 nuts and you’re done.
Hi - Thanks for watching and sharing your experience!
EXACTLY 🤦🏽♀️🤦🏽♀️🤦🏽♀️🤦🏽♀️!!!!!
Has it ever been just "two"?
You forgot the two "wingnuts" that held the hold down in place. 😊
I knowww😩
Is the memory saver needed?
Hi - Thanks for watching! Probably. Please check out our video on Memory Saving. The link is in this video’s description.
Do you have any information in regards to replacing the “auxiliary/specialty” battery ?
Got to love these car manufacturers. They can't just keep thing simple.
Hi - Thanks for watching and sharing your opinion!
Don’t forget they have two batteries now haha!
The design for this battery is pretty horrible why not have it towards the front like almost everybody else
Hi - Thanks for watching and sharing your opinion!
Exactly what I needed! It covered every detail clearly and did not include extra stuff I didn't need and didn't leave out anything
I needed. I can't imagine anything that would
make it better. Thank you very much!
Hi - You're welcome and thanks for watching and sharing your experience!
Did u use a memory reader like he uses?
I think we have a contender for the world's must idiotic way to change a battery. Thank you for the video it did save the car from getting assaulted
Hi - Your welcome and thanks for watching and sharing your opinion!
what was wrong with the way he did it
😂😂😂😂😂😂
I think he meant on Jeep’s behalf or at least I hope. Because I def came here because of how much a pain it seemed prior to starting
Im just gonna say I think he, including me, think jeep/Chrysler really screwed us with this one
NOW THIS IS AN INSTRUCTIONAL VIDEO!! Shout out YOU sir!
What has to be re programmed if I don’t have the memory saver
Thanks so much. This was so easy to follow along with the video and replace my battery.
Also want to point out that these jeeps have two batteries with the start/stop function. If your battery keeps dying like mine does look into also replacing the aux battery
Thanks for watching and thank you for adding to the conversation!
Helped a ton changing out my wife’s car battery. Especially the wrench sizes for each nut. Awesome vid!
Hi - Thanks for watching and sharing your experience!
Why is changing a car battery so complicated in today's cars. It use to be easy.
Hi - Thanks for watching and sharing your opinion!
This video was great 👍 thanks
Thank you very much. Was easy to follow and helped me complete the project.
Hi - You're welcome and thanks for watching!
What's the benefit of using the upgraded battery? Just curious!!
The crank amps (CA), or cold crank amps (CCA). Better for cold weather, or vehicles that require higher crank amps from extra electronics
What a stupid set up I was so pissed trying to change this stupid thing today. Dam seat belt on a battery that ain't going nowhere!
Hi - Thanks for watching and sharing your experience!
Whyyyyyy did Jeep make such a complicated battery!!!
Hi - Thanks for watching and sharing your opinion!
Why did you show a picture of a Patriot?
@@TheBatteryShop at 0:28 that's a Patriot for sure. I owned one before.
Finally someone with a decent video
Thank you for watching and for the feedback!
Much thanks for your input on the matter, it was very helpful. More car videos on here could take notes…
Hi - You’re welcome and thanks for watching!
Can you change from AGM to EBF?
Thanks for watching. The battery that came with the vehicle was and SLI. You could upgrade to an EFB or AGM. If the original battery was an AGM you would not want to put anything but an AGM in as a replacement.
Do I need this “memory savor” lol
Thanks for watching. We recommend using a memory saver to save your presets. Seats, radio and other functions.
❤
Thank you for watching!
Do I have to remove anything front the positive side
Hi - Thanks for watching! We're not exactly sure what you are asking so we recommend that you watch the video again and/or follow the steps in a service/repair manual for your vehicle to be sure.
Thanks for the video. You made the process very easy.
Hi - You're welcome and thanks for watching!
Battery thermal blanket "
Thanks for watching.
This was a godsend! Thank you so much! 👍
Hi - Thanks for watching! We're glad the video helped.
I can’t believe I just UA-camd how to remove a battery 😂
Thank you for supporting our channel?
What happens if I don't have a memory saver??
Hi - Thanks for watching! It depends on the vehicle. Check out our video on memory saving for the types of memory saving and reasons you may have to use a memory saver. ua-cam.com/video/vSP3ShcaFgQ/v-deo.html
a very detailed video, thanks for effort. Optima still fits if the vehicle has the Start/System installed? The car you installed seems to have the engine start&stop system i
Hi - You're welcome and thanks for watching! We think it will fit but don't know for sure on all of the systems. We suggest that you check with the folks at optimabatteries.com to be sure.
@@TheBatteryShop thanks sir, contacted with optima and it is clear that with start&stop system you should go one size smaller. Optima H6 size battery will not fit, unluckily no H5 size for Optima.
Thanks for your swift reply.
Hi - Thanks for sharing the results of your investigation.
Any idea where to buy another red clip with the two screws ??
Hi - Thanks for watching! We usually start with the vehicle dealership parts department for that sore of thing.
@@TheBatteryShop Would missing the red clip cause the engine code "replace battery control unit" to come up? For the life of me I don't know why I have that code
Tudo lindo, porém não deixou o carro energizado com uma bateria reserva para não dar erro no computador de bordo, no minimo o carro vai ficar dando erro na luz de injeção.
Oi - Obrigado por assistir! Como uma economia de memória não foi usada, as redefinições do sistema podem ser necessárias. Sugerimos que verifique o manual do proprietário do veículo ou um manual de manutenção/reparação para o(s) procedimento(s).
What is the size of the battery 70A ?
Hi - Thanks for watching! This depends on the vehicle's year, engine size and if it has Stary/Stop. We suggest that you check with the vehicle owner's manual to be sure.
Don't need a memory saver. Replaced ours without out it.
Hi - Thanks for watching and sharing your experience!
Super helpful! Thanks so much for giving this step-by-step instruction
We're glad this was able to help you out!
I think my dealer used lo tire on the nuts. Can’t get it some of them off using as much strength as I can
Hi - Thanks for watching and sharing your experience!
What could happen if I change batterie without using the memory saver?
Hi - Thanks for watching! it depends on the year/model of the vehicle. It could be anything as simple as resetting the radio stations to a no-start situation. Check out our videos on battery registration. The links are in this video's description.
So helpful. Thank you
What is the nut thread size on the batter hold down. As to buy spares if you drop it
Hi - Thanks for watching! We don’t have that information here in the studio, so we recommend that you check with a service/repair manual for the vehicle to be sure.
Do you need to use a memory saver when working on a Jeep compass battery?
Hi - Thanks for watching! We suggest that you refer to the vehicle owner’s manual or a service/repair manual for the vehicle to be sure. We use a Memory Saver on most vehicles so we don’t have to worry about any system resets that might be necessary.
AWESOME VIDEO I'm a Girl and DID IT MYSELF❣️❣️❣️❣️
Hi - Thanks for watching and sharing your experience!
My positive plate is not coming off anywhere near as easy as yours did.
Hi - Thanks for watching and sharing your experience!
after thorough following the exact instructions, my Start/Stop is now Unavailable. Pls Help.
Hi - Thanks for watching! If a Memory saver was not used, a vehicle computer may need a reset. We suggest that you check the vehicle owner’s manual or a service/repair manual to be sure.
Did you get this fixed? Also, do you know the issue?
@@codyschrock4991it was the sensor after all.
How did you get the positive plate off so easy I’m having such a damn hard time
Hi - Thanks for watching! It has latches that have to be released at the same time as I recall.
What about the second battery for the start/stop function?
Hi - Thanks for watching! We recommend making a replacement decision on the battery after having it tested and reviewing the results.
What if you don’t have the memory saver device? Does that only affect things like clock, radio settings, etc.? Vehicle will start back up without the saver, right?
Hi - Thanks for watching! Depending on the vehicle, a few or many system resets may be required. We suggest that you check with the vehicle owner's manual or a service/repair manual for the vehicle to be sure.
What I just did I replaced my battery I use my battery booster hooked it up to the terminals then disconnected the battery and reconnected then turn the battery booster off works good
Anything about the 2nd battery/auxiliary battery?
Hi - Thanks for watching! We will produce a video on the auxiliary battery for this vehicle when we have the opportunity to get one into our studio. In the meantime, we suggest that you check with a service/repair manual for the vehicle for the replacement procedure.
What size bolts would i need if I accidentally lost some in the removal process?
Hi - Thanks for watching! We don't have that information here in the studio, so we recommend that you check with a local Jeep dealership parts department. They have that kind of information when we need it.
Gloves & Glasses? Why don't you wear ear plug additional?
Hi - Thanks for watching! While gloves and safety glasses can help protect from exposure to battery acid and the very real possibility of an explosion if the battery is venting hydrogen in the presence of a spark or open heat source (flame, cigarette, etc.), we suppose ear plugs would be beneficial as well if that should occur.
@@TheBatteryShop I think this is all very exaggerated. Today's batteries are closed systems, so no acid leaks out. And I've never heard of an explosion either. Apart from that, it is obligatory not to smoke or handle open flames in the vicinity of the battery.
Omg this is so much.. haha 🤦🏻♀️
Hi - Thanks for watching and sharing your opinion!
Thank you so very much! Went very well ❤
Hi - You’re welcome and thanks for watching and sharing your experience!
What about the auxiliary battery replacement?
Hi - Thanks for watching! Stay tuned - it's on our list to do as soon as we have the opportunity to get one into the studio.
Do you have to use a memory saver or is it optional ?
Hi - Thanks for watching! We suggest that you check the vehicle owner's manual or a service/repair manual for your vehicle to be sure. Check out our video on memory saving. The link is in this video's description.
Hi there, could you please share the battery specs? THX.
Hi - Thanks for watching! According to BCI, the 2019 - 2021 Jeep Compass without Start/Stop uses a Group 49, 600 CCA battery. With Start/Stop it uses a Group 47, 600 CCA AGM main battery and a Group 400, 200CCA Auxiliary battery.
@@TheBatteryShop many thanks.
I've just ordered one battery, based on that specs.
We have a bit different parameters.
Here in Ukraine we operate with capacity (60,63,64,70,72) and start current.
I've chosen 72 Amperhours and start current 680Amps
Whats a memory saver. Never heard of ot
Hi - Thanks for watching! The use of a memory saving procedure can usually keep the vehicle's computers memory's alive during the battery replacement procedure. Referring to our Memory Saving video will provide you with various memory saving procedures that can be used according to vehicle manufacturer's requirements. ua-cam.com/video/vSP3ShcaFgQ/v-deo.html
自分でバッテリー交換したいのですが
サイズがメイン、サブとも解らない…
日本で買えるのかな?
嗨 , 谢谢你的收看!我们使用微软翻译,但我们不明白你的问题。
i have removed the battery without the memory saver, now the car won't start. what could be the possible cause and how to solve it?
Same thing happened to my Jeep, was it the Immobilizer?
Helped a ton. Thanks for the video.
Hi - You’re welcome and Thanks for watching!
Do you have to use the computer or you can change it without
Can I give some one a jump without it messing up the computer?
What is the size of the battery
Hi - Thanks for watching! This vehicle requires q Group 48, 600 CC battery.
Thank you a lot Sir
You are very welcome!
Thanks!
Hi - You're welcome and thanks for watching!
Thank you so much!!!
Hi - You're welcome and thanks for watching!
Thank you so much for this!
Hi - You’re welcome and thanks for watching!
Very helpful thank you
Hi - You're welcome and thanks for watching!
Thanks
Hi - You’re welcome and thanks for watching!
Seems so easy.
Hi - Thanks for watching!
@@TheBatteryShop no problem. Didnt go as smooth as I had hoped.
🔥🔥🔥
Hi - Thanks for watching!
Did everything and car won’t start. :(
Hi - Thanks for watching! We suggest that you check everything to be sure that a fully charged battery and wiring is reinstalled correctly. If so, checking a service/repair manual for the troubleshooting steps may be required.
Първи съм i,m first