If only 18650 cells, they should have used 26650’s or perhaps 21700’s instead. You might be able to build external packs and parallel them into the existing battery circuit.
Leon Guibani not yet my friend, I spoked with a neighbor of mine which knows electronics and he said that the battery unit is build in a way that when the speaker is running the battery's discharge themselves one by one, when you change the unit they are connected in series, so they will charge up at the same lever together. The problem is that If I want to double the power I have to build another unit exactly the same way 4 battery's connected in series to obtain the same voltage and then in parallel with the original battery unit, this way the amps are doubled, we will now have 20.000 mah and the speaker will last double the time. The problem tough is that you cannot charge the two battery units in series because it will double the voltage at this point. The solution would be to buy another exact battery like the original and install a switch button and when the first battery pack is done you can switch by hand to the other one, the same thing for charging them. Or we need somebody who knows how to build a 20.000 mah battery at 14.4 volts. I was thinking to double the battery's on the same pcb board but I don't know if the pcb can support 8 battery's. This is the next question that I have to ask my neighbor. Thank you buddy you just made me realize that it may be a way to do it!😉
@@florincostinelionita You have to use BMS, you can get one on ebay cheap. You can build your own battery pack. Just buy 4s BMS you can add like 2 or more batteries in parallel. and do same 4 times in series. Or just and 1or more batteries in parallel in current setup. Make sure those are same type.
the pb 100 is 2500mah at 14.4Volts (2500mah 18650 at 3.6volts each X4) Replace those with LG MJ1 battery which each 18650 cells rated at 3500mah of capacity. you may get more battery life with just an upgrade of 1000mah from the stock batteries Modding is your choice if you to go beyond and maybe at can scale up to partybox 300 battery capacity
they are also 10 amp batteries. 3500 mah 18650 are usually like 5 amps. i wouldnt wanna draw too much power from a 5 amp battery if there's 10 amp batteries installed.
does anyone know if the batteries are spot welded/soldered together? or can you just buy a 4 pack 18650 to replace the batteries without needing to remove weld/solder?
Hey guys. Interested in upgrading the battery life myself. What about hooking up a 120v/230v (depending on where you live) powerbank? That should work right? How much watts would that powerbank need to be?
Thanks for the video, really appreciated. I have been thinking to add 3x4 Li-Ion stacks but I don't think I can solder them parallel to existing bettery. Original Li-ion charger circuit could be for 4 cells only, do you think it would be a problem to just add 3 stacks to existing batterys stack?
My dad says it could be a problem for the loading system if you just add more Batterys because of a higher Tension... I stay with the Battery, it is good enough😄
I would be interested in a power amplifier chip used. In my opinion, it could be a digital amplifier for efficiency. For example, the TDA7498 or TPA3116 both have a fairly similar sound character and in my opinion ideal for this type of speaker.
IT would be interesting replacing the amplifier, but I'm not able to do that, I don't think I have the knowledge. I tried to make a new battery but it's messy, I build a 4s battery with 8 cells but I cannot replace the existing one, it has its own bms board and there are not a positive and a negative wire to solder and that's it, it's way to complicated.
Are the batteries easily replacable/fixable? Mines have already lost a lot of life due to playing it outsidei in cold weather I think. Might not be that, but it doesnt hold for 10 hours like advertised anymore.
Hey there! Have you already considered to build in the DC power input like in PB300 or in PB200? There are videos where PB100 works with 12V. I personally think that 12V are not enough for good sound quality if 14.4V are required (that’s why the sound is better if plugged in to 220V). So, if we know the ideal working voltage (14.4V? - here we have to measure inside the PB100) then we could build in the DC power input and use any external power bank which can provide this voltage. Advantage is, you can take this power bank with you only if you are planning longer gigs, otherwise those 4-5 hours by original battery would be enough. And the power bank can be used also for other devices and can be charged easily.
@@alexeydatsyuk5180, you build in the 24 volt connector for external power supply but also installed 8 batteries. What is easier to install, what would you recommend?
Leave the internal battery's the way they are. Rather buy an mini power station that outputs the 220volt or 110volt if you using american plugs. You do get small 150w or 200watt with pure sine wave inverters and battery bank inside those are also lithium-ion. They sometimes have 18 or 20 of the 3.7v lithium-ion 18650's or 21,700's in them. or some have Lifepo4. They are also small and can be carried around. They should be able to recharge or work as "plugged in" for that extra oomph at least 2 or 3 times over. Something similar to this maybe : www.incredible.co.za/media/catalog/product/cache/7ce9addd40d23ee411c2cc726ad5e7ed/1/0/10140237_vs3_bff6.jpg
mine wont charge anymore..it has to be plugged to work..the light will flash indicating that its charging,but nothing will happen,like it will be stuck on the 1st level..can you help?do i have to change the batteries or something else?
Paul What i looked for reviews and it seems that the realistic battery life for the partybox 100 is around 5 - 6 hours. I got the ION Blockrocker this thing is a beast with a claimed battery life of 75 hours. They use something like a motorcycle battery and I can tell you I never got the battery empty. You can definitely have a bbq party with that thing ;)
Why the speaker has 4 x 2.5 mHa but jbl talks only about one , making peaple confusing how 2.5 mHa could reach 12 h. Even at low volume.. But now that I saw inside the speaker I can see how is it .. THANK YOU FOR THAT I'LL GET ONE SOON! Someone who knows if living always plugged in would damage the battery after a while?
@@florincostinelionita thanks man, I just saw one other video of the party box 300 and has the same system of battery but 8 instead 4 ,. But in that case jbl claims 10400mha still a mystery why for the party box 100 claims only one 2.5mha.. I really don't get that..
@@florincostinelionita and it's also weird because really looks more like 10.000 mHa the battery, at least trough the video.. 2.5 is small one. The full capacity of the battery must be 10.000 otherwise there's no sense..at least to me!
Hi The main board of my jbl party box 100 was damaged, turn on, the Bluetooth is ok, the lights is ok but not sound and I can't find it, you can help me where to find it. thanks
One question, i know i wrote a comment before, but im actually not sure, do i need to damage my pb permanently if i would take the ‚shell‘ off? Please just answer if you know that you’re right, even better if you tried yourself.
There is enough space at the bottom side to jam in a few more batteries. Stick with the 18650 cells and parallel connect them (IMPORTANT!). Then just ad some 220 V wire from the new pack in the bottom to the original pack at the top. (POLARITY !) Be aware of it has to be connected to the protection circuit of the original BP. Also, be aware of you won't have any thermal protection on the new pack, unless you want to complicate the build unnecessarily.
Raikinas123 you can't, only the jbl partybox 300 can be charged from a car socket, and the speaker comes with the cable for charging it. The partybox 100 does not have this option.
A S I think they're easy to change, I'm not sure if I want to add another 4 battery's or change them all, it's going to have its cost but I think it will worth the investment
@@kcjnr371 wow really?, i always make my own portable speakers and almost always use atleast 4.5ah batterys. 2.5ah is just to small with such high rms big magnet speakers battery gonna drain fast and die soon from to much stress :P
Not yet my friend, I tryed to doubles the power of the battery by adding 4 more battery's, I used LG MJ1 3500 mah and connected them in parallel with the original ones, using it's own bms system and I gotta tell you that it didn't work, this is why I didn't updated with a new video. I made a new video while I worked on doing this but never uploaded it because I found out that is not working. So now I have to find another way.
I got a question maybe stupid to you but how the power outlets (below the bass port) is attached to the wood, how resistant is it? Because if i press the cable with a bit of strenght on the outlets can it break easily ?
Jesus no wonder the pb100 is such a bass beast, look at these gigantic magnets sitting behind those medium sized woofers. It really looks like high quality shit right there. Actually i dont want to destroy my pb so i just always watch these kinds of videos haha.
Jesus ... you again 😂 allright . Its of course high quality. Big magnets, Voicecoil ventilation and a Wood case with Isolation. Soo . Its overall very nice.
I have a problem!!!! I am a Jbl partybox 100 owner, and I was wondering if it was normal for the battery to charge (when is off) from 1/5 notches to fully charged in only 1 hour and a half ... The instructions say it takes at least 6.5 hours! It's normal ?
@@nicolo7038 Could mean a bad cell and your protection is stopping the charging cycle early. It could also be the protection circuit is not measuring the charge properly. Just a guess, I am not an expert.
MiKE JONES I just ordered 4 New batteries (LG INR 18650-MJ1 3500 mAh) and I hope that soon enough I'll make the video on how to update the battery! 😉 keep in touch guys.
@@florincostinelionita Hello! I made a similar upgrade, but I ran into a problem - the real capacity did not grow. The problem has been in the charge controller. I had to reprogram it for increased capacity. Otherwise, it will not allow to charge the battery more than 2.5 Ah
@@florincostinelionita I used 8 NCR18650B 3.4 Ah batteries instead of the installed LG. The total capacity is 6.8 Ah. But after measuring, I realized that the capacity did not grow. The fact is that a programmable controller is installed on the BMS board, configured for preinstalled batteries and it does not allow using a large capacity. After some study of the issue, it turned out that such a "smart" controller is installed in laptop batteries. I found a technician who reprogrammed the controller for me. Now everything works correctly
Hi there, if you still have the warranty, try to solve the problem with pioneer, if no warranty, try to change the battery, the speaker works when plugged to the power outlet?
@@tuliodesousanascimento7132 Good day, I had the same problem with only 2 months of purchasing it, seeing reviews I realized that it is a very common problem in this model and after trying to find a solution everywhere, no one knew what it was or they told me to send it to warranty, but what I did was buy a switched font and adapt it, it is very easy, since the original font hurt me, so I no longer loaded, with this fix the problem, I hope it will serve you.
@@BitByteTi Good Morning. The problem with my box was the plate. Soon I replaced some components of this card and the partybox 100 returned to normal load. I thank you for the contact. A hug. 
my PArtybox 300 is giving very low and goofy voice when in vertical mode. once i switch it to vertical something ticks and everything works fine.. when i return it back to vertical position voice goes bad again ? any thoughts ?
If you still have the warranty don't open it, let them take care of it, if not you can open it and flip it horizontal and vertical again to see if it's a contact that is loose.
@@TarekElRaey you have nothing to worry about, find yourself a "Macgyver" kind of friend which knows how to work his way around with a screw driver and you'll be fine, it's not rocket science. I'm a nurse and if I could do it you can do it too.
hello . a query . I have a party300 problem is that it only rings the small speakers . the big speakers do not sound that problem will have . you can help me. thanks-
I believe that you still have the warranty, at this point you better send it to the pro team to study the problem, if not you can put your hands on it by testing the speakers one by one to search for the problem, even though I think it's the amplifier. Let me know what you decide to do, I'm curious! Good luck bro 👏🏻👏🏻
@@florincostinelionita its scary using a soldering iron on a battery lol. i will have mine soon. maybe it is better to wait till the warranty expires before opening, im not sure.
@@lllCANDYMAANlll oh yes you should wait for the warranty, I have 2 partyboxes and I sacrificed one the other one it's like new, I only use it at home and when I go outside to mix some tracks with some of my friends, the opened one I use it for work, yes I have a job where I need to use music. Follow FloRo Fashion page on Facebook 😉
@@florincostinelionita this looks like a good idea, it has 20,000mah and the speakers built in batteries are only 2,500mah so this should give louder playback and long user time and the battery isnt too big or heavy either. ua-cam.com/video/XQ1stpuS_z0/v-deo.html
My pb 100 speaker has something loose inside, it's not the speakers, it seems to be this black cone like a horn, when I turn it sideways it makes a noise, do you think it can cause any damage? I'm afraid to open and give a problem, I really appreciate your answer. OBS is playing. normally. obg, I'm Brazilian I tried to translate, sorry for the errors.
I believe it's the plastic cone as well, if you still have the warranty don't open it, send it back so they can fix the problem. It can affect the sound In my opinion, when you turn it up high it doesn't vibrate?
@@florincostinelionita it is no longer under warranty, i bought this with one year and four months, i am afraid to open it alone and damage it. The sound is working normally, when the rise does not vibrate, it plays normal at maximum volume. You just notice that it has a loose cone, if you put the speaker on its side, or turn it over, it makes the noise like there was something loose inside, but if you lift it normally, you can't even see it
@@florincostinelionita indicates to do something? or leave it anyway since it's barely bothering the sound, because inside the hand there's room for the cone to turn or disturb the sound, I think
turan sandcastle I spoked with some people and they say that another set of batteries connected in parallel with the original ones will do the job, it will take a whole night to charge maybe but hopefully will work
There is something crossing my mind lately, the jbl partybox 300 has a 7.4v battery and it's 13.600 mah if I'm not wrong, the partybox 100 on the other hand has a 14.4 volts battery. Based on this information, can we put 2 partybox 300 battery's in series to obtain 14.8 volts? Any genius think this will work?
Florin Costinel Ionita it’s possible if you reuse the circuit but now it will be 4S 2P configurations. The case for the battery can be 3D printed from a company on the web. Having in this configuration just basically doubles capacity not the voltage. Pb300 on the other hand, use 7.2V which is 2S 4P configuration. I’m just hoping the circuit board for the battery can charge it on a higher capacity. I hope you get what I mean. S= series P= parallel. Series for higher voltage. Parallel for higher capacity
Thnx for nice video To my knowledge PB 300 8 Cells x 3.6V X 2600mAh = 74.88 Wh. Advertised as 10400mAh PB 100 4 Cells X 3.6 V X 2500mAh = 36 Wh. Advertised as 2500mAh Wh is reasonable way to compare total battery capacity.
priit leemet yes voltage X amp = watts. I might make a battery pack with its own charging port for pb100 and just plug the battery directly. The lg mj1 18650 has higher capacity. 3500mah by just replacing the cells from the pack, you’ve essentially increased the capacity of battery pack of pb100 by 40%. I’m not doing it yet because it’s still under warranty.
I would suggesting buying 18650s and building your own battery pack. The ones in their speakers looks like dogshit. Building your own wouldn't be too expensive, and you can get 3400mah batteries, instead of 2500mah which I heard JBL uses, meaning even more capacity.
Joselito Reyes I think a third party battery could be done but I don't think that any user can install it, there are a lot of left handed "brain's" out there that could not make an "O" letter with a glass and a pen.😄 I don't recommend opening this speaker to all, you have to understand at least what you are doing...😄
Atka Wolf I didn't checked actually but I can tell you that inside the house at half volume the furniture and the windows are shaking, I must say that I have two of them.
@@florincostinelionita I have an Aiwa Exos-9, and it vibrates the drywall to hell even though I'm only pushing it ¼ of it's capable possible output. I also prefer the Exos-9 because both mids and tweeters are on each side of the "subwoofer", unlike the unusual driver placement on the JBL Partyboxes, and the fact that you can easily swap the battery for another one without taking it apart to keep the party going.
Atka Wolf you see, now you're making me feel sorry about buying the partyboxes, I know that the aiwa sounds better but there is another project in my mind to try and change the tweeters on both speakers, I just want to find 4 bose tweeters all the same. Maybe next year I'll do that 😉
nimeni86 eu văzusem un video pe UA-cam al unui Neamț care vorbește în engleză și face comparația intre cele doua, pare ca sună mai bine 100 decât 300. Eu am 2 partybox 100 și crede-mă că sună foarte bine. Din cauza perioadei cu virusul n-am reușit încă să fac una video afara dar de îndată ce se deblochează tot îl voi face. Nu știu dacă le-ai văzut deja aproape pe amândouă dar ca și greutate și mai ales transport sunt mult mai comode Partybox 100!
nimeni86 scrie în bara de search "out to Righi Park" e un video pe care l-am făcut când a fost fratele meu în vizită la mine și pe vremea aia aveam doar o boxă, dar și-a făcut treaba, da na știi cum e, ce sună mai bine decât o boxă jbl partybox 100? 2 boxe jbl partybox 100 😅
@@randomweirdyoutubechannel8955 that will increase the voltage when connected in parallel and will increase the amps in series so, myabe in series would be ok, im only a novice electrician
Sorry, I don't know how to help you, try to Google it, maybe you'll find some forums where they're talking about this, I'm sure you're not the only one having this problem
Rene Schumann that's a good question, I never thought of this, I think that if the socket is there same it could work, it has to have the same voltage though!
@@michalmakowski5249 "disaaaemble jbl partybox 100 & battery replacement (part 2/2)" search for this video on UA-cam, you will find a way to overcome the power supply.
Good day, I had the same problem with only 2 months of purchasing it, seeing reviews I realized that it is a very common problem in this model and after trying to find a solution everywhere, no one knew what it was or they told me to send it to warranty, but what I did was buy a switched font and adapt it, it is very easy, since the original font hurt me, so I no longer loaded, with this fix the problem, I hope it will serve you.
@@szekerespista3758 ugh in partybox 100 you have 2 low freq speaker and 2 tweeters When you plug pb to Wall outlet each woofer uses 80 Watts You have 2 ot those so 160 w of power
Andrey Andonov I've tested it outside, I went to a park with my little brother and a friend and we played for 3 hours on a high volume, it has 5 led's that indicates the power left, after we finished it had 2, based on this I think it would last for 5-6 hours on a high volume. For me it's good enough, but if I can find a way to double the power it would be great.
@@florincostinelionita Recently I've been watcHing videos on PB100 & I found a video of PB100 plays on 12v dc ! wHat's your take on tHis by upgrading PB100 battery witH PB300 or run PB100 on 12v dc ? Here's the link of tHe video :- ua-cam.com/video/gI0hQIBk2Ng/v-deo.html ua-cam.com/video/Q-hJW3WCHXQ/v-deo.html
Harsh Vardhan I saw that video and I understand that you can power it on 12v dc but the partybox 300 has a 7.4v battery and it's not good for the partybox 100, the 12v could be an option but I want to make it last more because there are places where you don't have the possibility to have the car with you and I would like the battery's to last a little longer 10 hours would be great 😅
@@florincostinelionita tHanxz....but How PB100 battery lasts for 10 Hours ? Also is it ok to run our PB100 on dc as I want to use it in My car too but didn't see any video regarding tHis !
Shaun Williams the Mother house of JBL says that the battery is 14.4 volts and 2500 mah which makes me think that every single one of them is 0.750 mah....🙄 My thoughts are: if we can replace the battery's with the same voltage and 2500 mah each we can have a 10.000 mah battery which will at least triple the juice 😅
@@florincostinelionita No. In this battery, 4 18650 cells with a voltage of 3.7 and a capacity of 2500 mAh each are connected in series. Therefore, the entire battery has a voltage of 14.4 volts and a capacity of 2500 mAh. There are 2 options for increasing the battery capacity: 1. Replace the 18650 cells with more capacious ones, for example 26650. 2. Add one more the same element to each 18650 element in parallel, if possible choose with the same parameters
PhoenixYT 124 Nope . Defenetly not. The Sound is great with good bass. Sure its Not the best but do u have the Box ? Can you decide whats good or bad ? Really? The Box use a good Class-D system and dont Need such a useless big battery...
Gotta love technology and how far we’ve come
If only 18650 cells, they should have used 26650’s or perhaps 21700’s instead. You might be able to build external packs and parallel them into the existing battery circuit.
Hello! Great video, please can you show how you open it up? Did you try to change the batteries with the same voltage and more mA to see if it works?
Very helpful one, if u decide to add more batteries please film it. I would like to see how it is done. :)
Mike Bonev ok, I'm studying a way to do it and I will sure make a video of it 😉
@@florincostinelionita did you end up doing a battery upgrade on the unit?
Leon Guibani not yet my friend, I spoked with a neighbor of mine which knows electronics and he said that the battery unit is build in a way that when the speaker is running the battery's discharge themselves one by one, when you change the unit they are connected in series, so they will charge up at the same lever together. The problem is that If I want to double the power I have to build another unit exactly the same way 4 battery's connected in series to obtain the same voltage and then in parallel with the original battery unit, this way the amps are doubled, we will now have 20.000 mah and the speaker will last double the time. The problem tough is that you cannot charge the two battery units in series because it will double the voltage at this point. The solution would be to buy another exact battery like the original and install a switch button and when the first battery pack is done you can switch by hand to the other one, the same thing for charging them. Or we need somebody who knows how to build a 20.000 mah battery at 14.4 volts. I was thinking to double the battery's on the same pcb board but I don't know if the pcb can support 8 battery's. This is the next question that I have to ask my neighbor. Thank you buddy you just made me realize that it may be a way to do it!😉
Florin Costinel Ionita porquê um aparelho de som que de certa forma custa mais do que a boombox e com uma bateria tão fraca?
@@florincostinelionita You have to use BMS, you can get one on ebay cheap. You can build your own battery pack. Just buy 4s BMS you can add like 2 or more batteries in parallel. and do same 4 times in series. Or just and 1or more batteries in parallel in current setup. Make sure those are same type.
the pb 100 is 2500mah at 14.4Volts (2500mah 18650 at 3.6volts each X4) Replace those with LG MJ1 battery which each 18650 cells rated at 3500mah of capacity. you may get more battery life with just an upgrade of 1000mah from the stock batteries
Modding is your choice if you to go beyond and maybe at can scale up to partybox 300 battery capacity
they are also 10 amp batteries. 3500 mah 18650 are usually like 5 amps. i wouldnt wanna draw too much power from a 5 amp battery if there's 10 amp batteries installed.
Weird question but does the full battery unit have 2500 mah, so 625 mah each or 10.000 mah with 2500 each? 😅
2500mah each and 2500mah totally because the batteries are in serie for result 14,8~16,8v that the working voltage of the speaker.
Filipe Soares Alright thanks
Well hi fluffs
Xabeast Bass 😱
@@filipesoares5400 E o que posso fazer para aumentar essa bateria? A minha morreu de qualquer forma
Damn all of those circuits just for a speaker
and for the lights, wireless connections, analog inputs, charging, etc.
does anyone know if the batteries are spot welded/soldered together? or can you just buy a 4 pack 18650 to replace the batteries without needing to remove weld/solder?
They are welded together but I think you can replace them as well
I can't believe how JBL put so small batteries in such a big unit and still charge so much
Спасибо что разобрал, было полезно видео!
Nice my friend good work
Hey guys. Interested in upgrading the battery life myself. What about hooking up a 120v/230v (depending on where you live) powerbank? That should work right? How much watts would that powerbank need to be?
I would love to figure out how to do this, I have 2 of these and I wish the battery would last longer.
Can you play the 100 while charging ? Can you tell us hiw long it lasts with your usage !?
@@a.m.3118 +1 how much time it last before batery drain on się it says 12 h but on 100%volume i dont think so
ρiπp'lες In now that we are in quarantine I can't turn the volume to high because I have neighbours 😅 so the battery lasts longer, about 6-7 ours
@@florincostinelionita is it 18650 battery...?
@@NeilVerm yes
I love my pb 100 I'm not messing with the battery the battery it came with is enough for my use
Lovely woofers inside it..
Thanks for the video, really appreciated. I have been thinking to add 3x4 Li-Ion stacks but I don't think I can solder them parallel to existing bettery. Original Li-ion charger circuit could be for 4 cells only, do you think it would be a problem to just add 3 stacks to existing batterys stack?
My dad says it could be a problem for the loading system if you just add more Batterys because of a higher Tension... I stay with the Battery, it is good enough😄
does the amperage matter or should the appropriate voltage come 14.4 14.8
6 AH
I would be interested in a power amplifier chip used. In my opinion, it could be a digital amplifier for efficiency. For example, the TDA7498 or TPA3116 both have a fairly similar sound character and in my opinion ideal for this type of speaker.
IT would be interesting replacing the amplifier, but I'm not able to do that, I don't think I have the knowledge. I tried to make a new battery but it's messy, I build a 4s battery with 8 cells but I cannot replace the existing one, it has its own bms board and there are not a positive and a negative wire to solder and that's it, it's way to complicated.
Thanks for this video. I own jblpb100. Very excellent performance. Where can I get batteries for this.
Are the batteries easily replacable/fixable? Mines have already lost a lot of life due to playing it outsidei in cold weather I think. Might not be that, but it doesnt hold for 10 hours like advertised anymore.
Hey there!
Have you already considered to build in the DC power input like in PB300 or in PB200? There are videos where PB100 works with 12V. I personally think that 12V are not enough for good sound quality if 14.4V are required (that’s why the sound is better if plugged in to 220V). So, if we know the ideal working voltage (14.4V? - here we have to measure inside the PB100) then we could build in the DC power input and use any external power bank which can provide this voltage. Advantage is, you can take this power bank with you only if you are planning longer gigs, otherwise those 4-5 hours by original battery would be enough. And the power bank can be used also for other devices and can be charged easily.
the voltage after the built-in power supply is 23 volts. I installed the connector and supply external power through a 24 volt dc-dc converter
@@alexeydatsyuk5180 did you document somewhere how you did that?
@@alexeydatsyuk5180, you build in the 24 volt connector for external power supply but also installed 8 batteries. What is easier to install, what would you recommend?
Leave the internal battery's the way they are. Rather buy an mini power station that outputs the 220volt or 110volt if you using american plugs.
You do get small 150w or 200watt with pure sine wave inverters and battery bank inside those are also lithium-ion. They sometimes have 18 or 20 of the 3.7v lithium-ion 18650's or 21,700's in them. or some have Lifepo4. They are also small and can be carried around. They should be able to recharge or work as "plugged in" for that extra oomph at least 2 or 3 times over.
Something similar to this maybe :
www.incredible.co.za/media/catalog/product/cache/7ce9addd40d23ee411c2cc726ad5e7ed/1/0/10140237_vs3_bff6.jpg
JBL partybox 100 automatically getting switch on.after reset same problem.how to solve this issue.plz tell
Supongo que es resistente al agua, más no a prueba de ella, y más sin embargo tiene madera en su interior??
mine wont charge anymore..it has to be plugged to work..the light will flash indicating that its charging,but nothing will happen,like it will be stuck on the 1st level..can you help?do i have to change the batteries or something else?
aj ct if I had this situation I would consider changing the battery's, be sure to replace with the exact same voltage!
Am I crazy or is there only 4 x 18650 batteries??? That's impossible
Yeah... it's only 2500 mAh, but not same kind of battery than a phone or flip, charge speakers...
How is this possible when the much smaller xtreme 2 has 10.000 mAh and they claim for both around the same playtime ?
@@llukas0906 exactly what i was thinking. I have the extreme and was gonna upgrade to the partybox for bbqs. But the small battery has me concerned.
Paul What i looked for reviews and it seems that the realistic battery life for the partybox 100 is around 5 - 6 hours. I got the ION Blockrocker this thing is a beast with a claimed battery life of 75 hours. They use something like a motorcycle battery and I can tell you I never got the battery empty. You can definitely have a bbq party with that thing ;)
To reduce the cost and weight and to increase profits. That's why they didn't add 10000mah battery
Why the speaker has 4 x 2.5 mHa but jbl talks only about one , making peaple confusing how 2.5 mHa could reach 12 h. Even at low volume.. But now that I saw inside the speaker I can see how is it ..
THANK YOU FOR THAT I'LL GET ONE SOON!
Someone who knows if living always plugged in would damage the battery after a while?
Sil S.C. I discharge the speaker once a week or two weeks, for the rest of the time I keep it plugged in.
@@florincostinelionita thanks man, I just saw one other video of the party box 300 and has the same system of battery but 8 instead 4 ,. But in that case jbl claims 10400mha still a mystery why for the party box 100 claims only one 2.5mha..
I really don't get that..
Sil S.C. I thought it was 2500 mah for each battery, I checked and realized you're wright, it's 14,4v and 2500 mah the whole battery unit 🤔
@@florincostinelionita how's that possible? Tye jbl flip 4 has.3.0 mHa
Lol
@@florincostinelionita and it's also weird because really looks more like 10.000 mHa the battery, at least trough the video.. 2.5 is small one.
The full capacity of the battery must be 10.000 otherwise there's no sense..at least to me!
Hi
The main board of my jbl party box 100 was damaged, turn on, the Bluetooth is ok, the lights is ok but not sound and I can't find it, you can help me where to find it. thanks
Hi
My partybox 300 housing is broken. How can buy it.
Is it going to affect the battery if we use it in AC mode ?
No
Hi Florin... what is the amplifier chip inside?
Hello sir can I asked a question any wireless mic can sack in partybox 310.
One question, i know i wrote a comment before, but im actually not sure, do i need to damage my pb permanently if i would take the ‚shell‘ off? Please just answer if you know that you’re right, even better if you tried yourself.
No you don’t. Don’t try taking it apart tho. It’s a super hard and dangerous process. There’s so much that could go wrong in the process of doing it.
JBL DESTROYER thank you for answering my question.
PhoenixYT 124 no problem!
jbl...
hermoso por dentro y fuera
There is enough space at the bottom side to jam in a few more batteries. Stick with the 18650 cells and parallel connect them (IMPORTANT!).
Then just ad some 220 V wire from the new pack in the bottom to the original pack at the top. (POLARITY !)
Be aware of it has to be connected to the protection circuit of the original BP. Also, be aware of you won't have any thermal protection on the new pack, unless you want to complicate the build unnecessarily.
Моя мечта сбылась, пойду шуруповёрт отнесу на место!
Cool
Hello. Please. Help.
How to connect power to dc 12-14v from car or boat this devaice. To charge the battery JBL.
Raikinas123 you can't, only the jbl partybox 300 can be charged from a car socket, and the speaker comes with the cable for charging it. The partybox 100 does not have this option.
I'm getting a socket conversion
Thanks!
What are the battery model and are they easy to change? (It looks like it is)
A S I think they're easy to change, I'm not sure if I want to add another 4 battery's or change them all, it's going to have its cost but I think it will worth the investment
Each battery is 625 mAh=2500mAh so i wonder if you could use vape mod batteries 18650=each battery is 2500mAh or use 20700/21700 batteries 2500mAh
Just need to figure out the + & - on the battery to see if there the right battery
@@kcjnr371 wow really?, i always make my own portable speakers and almost always use atleast 4.5ah batterys.
2.5ah is just to small with such high rms big magnet speakers battery gonna drain fast and die soon from to much stress :P
hi florin did you udgrade the battery capacitt or not ?
Not yet my friend, I tryed to doubles the power of the battery by adding 4 more battery's, I used LG MJ1 3500 mah and connected them in parallel with the original ones, using it's own bms system and I gotta tell you that it didn't work, this is why I didn't updated with a new video. I made a new video while I worked on doing this but never uploaded it because I found out that is not working. So now I have to find another way.
@@florincostinelionita hey florin have u tried the partybox 300 replacement battery ?? It looks like it would fit in the exact same slot
@@Miunz1 I have thought about that but the partybox 300 battery has a different voltage.
I got a question maybe stupid to you but how the power outlets (below the bass port) is attached to the wood, how resistant is it? Because if i press the cable with a bit of strenght on the outlets can it break easily ?
It's been a while since I've open it and honestly I don't remember how it's attached, the next time I will pay attention and I will show it on video!
@@florincostinelionita nice ! Think this would interest a lot of peoples like me
Jesus no wonder the pb100 is such a bass beast, look at these gigantic magnets sitting behind those medium sized woofers. It really looks like high quality shit right there. Actually i dont want to destroy my pb so i just always watch these kinds of videos haha.
Jesus ... you again 😂 allright . Its of course high quality. Big magnets, Voicecoil ventilation and a Wood case with Isolation. Soo . Its overall very nice.
Stephan Zeiner dude why do you tell me? Cant you see that i know a lot about speakers?
PhoenixYT 124 bottle Flips , Handy Test and charge 4 ? Thats Right ....
PhoenixYT 124 no
Stephan Zeiner bro dont judge me ok?
Is this thing supposed to be making a quiet humming noise when the ac cord is plugged in and charging?
saamgeuk I don't think so, mine is not making any noise 😳
No name I can only hear the noise when I place my ear on top of the speaker, otherwise I don't hear anything, am I going deaf?😅
I have a problem!!!!
I am a Jbl partybox 100 owner, and I was wondering if it was normal for the battery to charge (when is off) from 1/5 notches to fully charged in only 1 hour and a half ... The instructions say it takes at least 6.5 hours! It's normal ?
Nicolò i remember it would charge fully really fast when it was really new but over time it would take longer to recharge fully.
@@nicolo7038 Could mean a bad cell and your protection is stopping the charging cycle early. It could also be the protection circuit is not measuring the charge properly. Just a guess, I am not an expert.
do you have a video o how to dismantle that?
hello, does anyone know, source from jbl partybox 100, what supply voltage it has, thanks
Do we get replacement drivers for these
Did you brake one ?😦
maybe 4P4S still can fit in the box
What is the song?
Ed Wizard & Disco Double Dee - Summer Love
Wow i got the same one and i thought there was a bigger battery unit
MiKE JONES I just ordered 4 New batteries (LG INR 18650-MJ1 3500 mAh) and I hope that soon enough I'll make the video on how to update the battery! 😉 keep in touch guys.
@@florincostinelionita Hello! I made a similar upgrade, but I ran into a problem - the real capacity did not grow. The problem has been in the charge controller. I had to reprogram it for increased capacity. Otherwise, it will not allow to charge the battery more than 2.5 Ah
Alexey Datsyuk can you explain how you raised the capacity? How's much was improved with the new batteries?
@@florincostinelionita I used 8 NCR18650B 3.4 Ah batteries instead of the installed LG. The total capacity is 6.8 Ah. But after measuring, I realized that the capacity did not grow. The fact is that a programmable controller is installed on the BMS board, configured for preinstalled batteries and it does not allow using a large capacity. After some study of the issue, it turned out that such a "smart" controller is installed in laptop batteries. I found a technician who reprogrammed the controller for me. Now everything works correctly
@@alexeydatsyuk5180 how long those new battery last when played on max volume?
Good evening ! My JBL partybox 100 box has stopped charging. What do you think it can be? Thank you very much in advance.
Hi there, if you still have the warranty, try to solve the problem with pioneer, if no warranty, try to change the battery, the speaker works when plugged to the power outlet?
@@florincostinelionita Hello good day! While it had battery the box worked normal, but now unfortunately it doesn't charge anymore!
@@tuliodesousanascimento7132 Good day, I had the same problem with only 2 months of purchasing it, seeing reviews I realized that it is a very common problem in this model and after trying to find a solution everywhere, no one knew what it was or they told me to send it to warranty, but what I did was buy a switched font and adapt it, it is very easy, since the original font hurt me, so I no longer loaded, with this fix the problem, I hope it will serve you.
@@BitByteTi Good Morning. The problem with my box was the plate. Soon I replaced some components of this card and the partybox 100 returned to normal load. I thank you for the contact. A hug.

Thanks for shownig
my PArtybox 300 is giving very low and goofy voice when in vertical mode. once i switch it to vertical something ticks and everything works fine.. when i return it back to vertical position voice goes bad again ? any thoughts ?
If you still have the warranty don't open it, let them take care of it, if not you can open it and flip it horizontal and vertical again to see if it's a contact that is loose.
@@florincostinelionita yes I saw some videos on how to open it but I was affraid to do it myself.
No it's out of warranty already.
@@TarekElRaey you have nothing to worry about, find yourself a "Macgyver" kind of friend which knows how to work his way around with a screw driver and you'll be fine, it's not rocket science. I'm a nurse and if I could do it you can do it too.
hello . a query . I have a party300 problem is that it only rings the small speakers . the big speakers do not sound that problem will have . you can help me. thanks-
I believe that you still have the warranty, at this point you better send it to the pro team to study the problem, if not you can put your hands on it by testing the speakers one by one to search for the problem, even though I think it's the amplifier. Let me know what you decide to do, I'm curious! Good luck bro 👏🏻👏🏻
do the batteries pop out easy? i was thinking of making a accessable compartment so i can change the batteries outside camping.
The batteries are soldered together but I guess you can modiffy the case in which they are hosted so that you can charge them one by one
@@florincostinelionita its scary using a soldering iron on a battery lol. i will have mine soon. maybe it is better to wait till the warranty expires before opening, im not sure.
@@lllCANDYMAANlll oh yes you should wait for the warranty, I have 2 partyboxes and I sacrificed one the other one it's like new, I only use it at home and when I go outside to mix some tracks with some of my friends, the opened one I use it for work, yes I have a job where I need to use music. Follow FloRo Fashion page on Facebook 😉
@@florincostinelionita il take a look
@@florincostinelionita this looks like a good idea, it has 20,000mah and the speakers built in batteries are only 2,500mah so this should give louder playback and long user time and the battery isnt too big or heavy either.
ua-cam.com/video/XQ1stpuS_z0/v-deo.html
My pb 100 speaker has something loose inside, it's not the speakers, it seems to be this black cone like a horn, when I turn it sideways it makes a noise, do you think it can cause any damage? I'm afraid to open and give a problem, I really appreciate your answer. OBS is playing. normally. obg, I'm Brazilian I tried to translate, sorry for the errors.
I believe it's the plastic cone as well, if you still have the warranty don't open it, send it back so they can fix the problem. It can affect the sound In my opinion, when you turn it up high it doesn't vibrate?
@@florincostinelionita it is no longer under warranty, i bought this with one year and four months, i am afraid to open it alone and damage it. The sound is working normally, when the rise does not vibrate, it plays normal at maximum volume. You just notice that it has a loose cone, if you put the speaker on its side, or turn it over, it makes the noise like there was something loose inside, but if you lift it normally, you can't even see it
@@florincostinelionita
indicates to do something? or leave it anyway since it's barely bothering the sound, because inside the hand there's room for the cone to turn or disturb the sound, I think
@@diegopaiva3814 based on what you just said I believe you don't have a problem, if it's doesn't bother you there's no need to open it.
What chip are they using for the DAC?
I have no idea, I believe it's under the aluminium radiator, but I didn't checked.
any news regarding battery upgrade?just purchased mine and in 4 5 hours it drains completley.
turan sandcastle I spoked with some people and they say that another set of batteries connected in parallel with the original ones will do the job, it will take a whole night to charge maybe but hopefully will work
@@florincostinelionita looking forward to any updates
There is something crossing my mind lately, the jbl partybox 300 has a 7.4v battery and it's 13.600 mah if I'm not wrong, the partybox 100 on the other hand has a 14.4 volts battery. Based on this information, can we put 2 partybox 300 battery's in series to obtain 14.8 volts? Any genius think this will work?
Florin Costinel Ionita it’s possible if you reuse the circuit but now it will be 4S 2P configurations. The case for the battery can be 3D printed from a company on the web. Having in this configuration just basically doubles capacity not the voltage. Pb300 on the other hand, use 7.2V which is 2S 4P configuration. I’m just hoping the circuit board for the battery can charge it on a higher capacity. I hope you get what I mean. S= series P= parallel. Series for higher voltage. Parallel for higher capacity
Thnx for nice video
To my knowledge
PB 300 8 Cells x 3.6V X 2600mAh = 74.88 Wh. Advertised as 10400mAh
PB 100 4 Cells X 3.6 V X 2500mAh = 36 Wh. Advertised as 2500mAh
Wh is reasonable way to compare total battery capacity.
priit leemet yes voltage X amp = watts. I might make a battery pack with its own charging port for pb100 and just plug the battery directly. The lg mj1 18650 has higher capacity. 3500mah by just replacing the cells from the pack, you’ve essentially increased the capacity of battery pack of pb100 by 40%. I’m not doing it yet because it’s still under warranty.
I would suggesting buying 18650s and building your own battery pack. The ones in their speakers looks like dogshit.
Building your own wouldn't be too expensive, and you can get 3400mah batteries, instead of 2500mah which I heard JBL uses, meaning even more capacity.
How am I able to un screw this model as I dropped it and the bottom piece is over lapping now
I don’t think that is possible without permanently damaging the Hardware. I hope another dude answers us.
Do you think that the battery can be easily customised by a third party to increase the size and be installed by the user?
Joselito Reyes I think a third party battery could be done but I don't think that any user can install it, there are a lot of left handed "brain's" out there that could not make an "O" letter with a glass and a pen.😄 I don't recommend opening this speaker to all, you have to understand at least what you are doing...😄
Can you tell me how much power that Amplifier chip actually produces, or at least know what it says on the chip?
Atka Wolf I didn't checked actually but I can tell you that inside the house at half volume the furniture and the windows are shaking, I must say that I have two of them.
@@florincostinelionita I have an Aiwa Exos-9, and it vibrates the drywall to hell even though I'm only pushing it ¼ of it's capable possible output.
I also prefer the Exos-9 because both mids and tweeters are on each side of the "subwoofer", unlike the unusual driver placement on the JBL Partyboxes, and the fact that you can easily swap the battery for another one without taking it apart to keep the party going.
Atka Wolf you see, now you're making me feel sorry about buying the partyboxes, I know that the aiwa sounds better but there is another project in my mind to try and change the tweeters on both speakers, I just want to find 4 bose tweeters all the same. Maybe next year I'll do that 😉
@@florincostinelionita I'm not saying the Partyboxes are bad, it's just that you get more Convenience with the Aiwa.
Thanks! thanks!
Whats the song guys?
Ed Wizard & Disco Double Dee - Summer Love
@@florincostinelionita Thank you 😊
where can iget spare speakers for party box 100
WwW⏺soundimports⏺eu
Does anyone know if you can replace the Bluetooth adapter chip? Mine is broken
Duude nooo, I have no idea, you can use a Bluetooth receiver and connect it to line in though
can a take a battery from a jbl partybox 300 and put it in a partybox 100 ? =)
Alias Goliath it would have been a great idea, but the partybox 100 runs at 14.4 volts and the partybox 300 runs at 7.4 volts
@@florincostinelionita yes i see it already =(
@@florincostinelionita what is the point on 14 vs 7.4?
100 in comparatie cu 300? E bun pt petreceri outdoor?
nimeni86 eu văzusem un video pe UA-cam al unui Neamț care vorbește în engleză și face comparația intre cele doua, pare ca sună mai bine 100 decât 300. Eu am 2 partybox 100 și crede-mă că sună foarte bine. Din cauza perioadei cu virusul n-am reușit încă să fac una video afara dar de îndată ce se deblochează tot îl voi face. Nu știu dacă le-ai văzut deja aproape pe amândouă dar ca și greutate și mai ales transport sunt mult mai comode Partybox 100!
nimeni86 scrie în bara de search "out to Righi Park" e un video pe care l-am făcut când a fost fratele meu în vizită la mine și pe vremea aia aveam doar o boxă, dar și-a făcut treaba, da na știi cum e, ce sună mai bine decât o boxă jbl partybox 100? 2 boxe jbl partybox 100 😅
Can I use a 12V lawn mower accu for extra cappacity?
Rik Klaessen there arn't any attacks to plug it, and you nel 14.4v 🤔
Better of with more 18650 batterys
@@randomweirdyoutubechannel8955 that will increase the voltage when connected in parallel and will increase the amps in series so, myabe in series would be ok, im only a novice electrician
Please sir, my JBL won't turn on. Power LED is on
Sorry, I don't know how to help you, try to Google it, maybe you'll find some forums where they're talking about this, I'm sure you're not the only one having this problem
Does the battery fit from the Partybox300
into the Partybox100 ?
Rene Schumann that's a good question, I never thought of this, I think that if the socket is there same it could work, it has to have the same voltage though!
Thanks for the quick answer. Is the plug from the battery the same? Do both boxes have 7 volts ?
Rene Schumann the partybox 100 has 14.4 volts and 2500 mah , I have to check the partybox 300 battery to see what it has.
Ok I'm excited, thank you very much
Florin Costinel Ionita partybox 300 battery is 7.4V 13400mAh 99.16Wh found on ebay. Disappointed, I thought I can replace with pb300 battery
Is that a 18650 battery ?
How many capacity in each battery
jeff 03 it has 2500 mah on each battery
So in total is 10.000 mah
Unlike the boombox 20k mah heheeheh
jeff 03 haha funny well let’s put om side by side and compare what they were both built for hehhheehehe
Just bought one. However, it is not charging. Do you have idea of the problem? Might be an easy fix or common fault.
@@matttagle6615 check the charging port or cable wire
can you tell what power supply is there?
I have no clue 😐
@@florincostinelionita mine is burnt and I can't find it anywhere. what model is it
@@michalmakowski5249 "disaaaemble jbl partybox 100 & battery replacement (part 2/2)" search for this video on UA-cam, you will find a way to overcome the power supply.
how many 18650 have jbl 100 inside ??
Adrian Tunaru it has 4 batteries
@@florincostinelionita wtf?? That's insane
How to charge my jbl party box 100 because it wont charge?
Good day, I had the same problem with only 2 months of purchasing it, seeing reviews I realized that it is a very common problem in this model and after trying to find a solution everywhere, no one knew what it was or they told me to send it to warranty, but what I did was buy a switched font and adapt it, it is very easy, since the original font hurt me, so I no longer loaded, with this fix the problem, I hope it will serve you.
How many partybox 100 really have watts?
Bruce Cygun on paper it is 60w nominal power (rms) with 2 jbl partybox 100 it's a party, trust me!
@@florincostinelionita its not 160?w
No name i don’t understand. Culd you please clarify?
@@szekerespista3758 ugh in partybox 100 you have 2 low freq speaker and 2 tweeters
When you plug pb to Wall outlet each woofer uses 80 Watts
You have 2 ot those so 160 w of power
@@szekerespista3758 When it is playing On batery it gives around 60 Watts in Total
Как вид 4 лионок 100 ватт или менше ето не возможно або стоить переобразиватель наприжения
Привет, кто знает характеристики динамиков на jbl partybox 100? Там мидбасы похоже...
how long does it last on full volume?
Andrey Andonov I've tested it outside, I went to a park with my little brother and a friend and we played for 3 hours on a high volume, it has 5 led's that indicates the power left, after we finished it had 2, based on this I think it would last for 5-6 hours on a high volume. For me it's good enough, but if I can find a way to double the power it would be great.
Must be around 4-5 hours with Bass and lights on.
@@florincostinelionita Recently I've been watcHing videos on PB100 & I found a video of PB100 plays on 12v dc !
wHat's your take on tHis by upgrading PB100 battery witH PB300 or run PB100 on 12v dc ?
Here's the link of tHe video :- ua-cam.com/video/gI0hQIBk2Ng/v-deo.html
ua-cam.com/video/Q-hJW3WCHXQ/v-deo.html
Harsh Vardhan I saw that video and I understand that you can power it on 12v dc but the partybox 300 has a 7.4v battery and it's not good for the partybox 100, the 12v could be an option but I want to make it last more because there are places where you don't have the possibility to have the car with you and I would like the battery's to last a little longer 10 hours would be great 😅
@@florincostinelionita tHanxz....but How PB100 battery lasts for 10 Hours ?
Also is it ok to run our PB100 on dc as I want to use it in My car too but didn't see any video regarding tHis !
можно на плате отключить звук включения ?
😳🦧🛸🗿🎎👽
Florin esti din ro ??
Da, locuiesc în Italia de 14 ani aproape dar sunt din Iași România 🇷🇴
@@florincostinelionita Cum putem lua legatura ??
Adrian Tunaru ➕3️⃣9️⃣ 3️⃣4️⃣9️⃣1️⃣1️⃣2️⃣5️⃣6️⃣1️⃣2️⃣ pe whatsapp
@@florincostinelionita Florine salut. Oare o poza nu ai facut la acumulatori sa vad cum sunt inseriate ca am gasit ceva la 14 .4, de 6000 mha :)
Boa
Anyone figure out how to wire in a second set of batteries?
Shaun Williams the Mother house of JBL says that the battery is 14.4 volts and 2500 mah which makes me think that every single one of them is 0.750 mah....🙄
My thoughts are: if we can replace the battery's with the same voltage and 2500 mah each we can have a 10.000 mah battery which will at least triple the juice 😅
@@florincostinelionita No. In this battery, 4 18650 cells with a voltage of 3.7 and a capacity of 2500 mAh each are connected in series. Therefore, the entire battery has a voltage of 14.4 volts and a capacity of 2500 mAh. There are 2 options for increasing the battery capacity: 1. Replace the 18650 cells with more capacious ones, for example 26650. 2. Add one more the same element to each 18650 element in parallel, if possible choose with the same parameters
Alexey Datsyuk thanks man i was thinking to add in parallel to each one but I was not sure if the charging system will support the whole package.
24-25 fps on video
That’s not a party box 1000
Жалко колонку
Not good cabinet quality 👍
10.000mah battery
2500
@@-Alkazar- Thanks, I say it would be interesting to put one of 10,000 :) a salute
Mundo Muerto absolutly but It lives long enouth with one load
Stephan Zeiner true, and thats a thing even though the box is so cheap.
PhoenixYT 124 Nope . Defenetly not. The Sound is great with good bass. Sure its Not the best but do u have the Box ? Can you decide whats good or bad ? Really?
The Box use a good Class-D system and dont Need such a useless big battery...
пати бокс 100 подзарядить с пауэр банк
Dude English, we are not all born in Russia
If you have a power bank that puts out 220v/110v it works
wow what a pathetic battery, and that wood inside just looks so cheap
Yeah... Im confused
Ha ha 160 wat 4s1p
That's the fake party box
How can you tell a fake one from the original?
What The fuck its wood
один фи на 2 дина? лол
Here there is another video on how to dissasemble a PB 300. It seems that there are 8 batteries inside.
ua-cam.com/video/RQIv-5LtiCI/v-deo.html
Im so sad. Not a big was is das xd
They made by wood jesus
You are pretty stupid if u thought its made of titanium.
Bálint Kovács wood is the great if you want it to sound amazing. Subwoofer are made by wood or MDF
@@phoenixyt124 well done xd the box where the speaker, is fck wood
Bálint Kovács i really dont understand a single word.
Спасибо что разобрал, было полезно видео!
😳⁉️
@@florincostinelionita Thank you for sorting it out, it was very interesting and useful to see what's inside!)