Have you tried to check the hole where the pickup roller shaft connects with the clutch. Sometimes that hole gets bigger as it wears out and there is a big play which causes this problem of picking papers.
Lods ano pa kaya solosyon saken, ganon paren, i already replace flex cable at nag replace din ako ng encoder strip akala ko okay na pero wala. Okay naman yung roler. Okay din yong sensor, hindi naman na dislocate at wala namang papel sa loob. Some a4 paper inside parin. Ano pa kaya dapat e check? Kumakain naman sya ng papel, pero pag nag print na agad lalabas at Ang nakalagay is some a4 load inside
please help. I have et 2720 and rear paper feed error. It has paper!, it pulls paper in halfway, then stuck and says rear paper feed. I opened up the printer and see all the gears are touching, everything looks normal as far as I know. What can i do?
Same issue. I started a print job then i shut my laptop and left home. I came back to this error and a half done print job. I think leaving the house caused the printer to shit itself
No epson is just shitty!! Mine was working perfectly fine last week and I went to go try and print and says paper out in rear feeder I put more paper and still nothing ! They said they couldn’t send me a new printer!
Hi, I had the same problem. Epson XP-3155 printer, I launched a print and it gave me the same message as you. Resolved. I used a portable lamp, looked in the paper compartment, and saw a strip of plastic, fallen in there. I unplugged the cables and turned the printer over, this way the foreign object fell out. Reconnected and all OK. I was going crazy.
LMAO.. I love your videos Kevin!! You have a GREAT sense of humor!! I have an Epson ET 15000 with an error code 000043. Do you know the solution?? It says to turn the printer off, What I have read points to a paper jam. But I have looked ALL OVER and do not see any paper!! If I fight with it enough, I can get it to work. But I usual give up before that happens. It's so frustrating!
You're hilarious. Very entertaining. I'm wondering if you fix Canon printers... if it's worth sending it in? A friend will give me a good deal on a pro1000 if I can get the door open Error fixed. He had contacted Canon and they said they can't diagnose it unless it has ink in the cartridges lol. Well there's no ink in but I can fill them up a little bit with non OEM ink. And I'm wondering if it's the sensor or something that's an issue whether it can just be cleaned or something like I've seen in other videos. A little WD 40. Or if it needs to be sent in or something. Thanks!
Have you tried to check the hole where the pickup roller shaft connects with the clutch. Sometimes that hole gets bigger as it wears out and there is a big play which causes this problem of picking papers.
Lods ano pa kaya solosyon saken, ganon paren, i already replace flex cable at nag replace din ako ng encoder strip akala ko okay na pero wala. Okay naman yung roler. Okay din yong sensor, hindi naman na dislocate at wala namang papel sa loob. Some a4 paper inside parin. Ano pa kaya dapat e check?
Kumakain naman sya ng papel, pero pag nag print na agad lalabas at Ang nakalagay is some a4 load inside
please help. I have et 2720 and rear paper feed error. It has paper!, it pulls paper in halfway, then stuck and says rear paper feed. I opened up the printer and see all the gears are touching, everything looks normal as far as I know. What can i do?
Same issue. I started a print job then i shut my laptop and left home. I came back to this error and a half done print job. I think leaving the house caused the printer to shit itself
No epson is just shitty!! Mine was working perfectly fine last week and I went to go try and print and says paper out in rear feeder I put more paper and still nothing ! They said they couldn’t send me a new printer!
Hi, I had the same problem. Epson XP-3155 printer, I launched a print and it gave me the same message as you. Resolved. I used a portable lamp, looked in the paper compartment, and saw a strip of plastic, fallen in there. I unplugged the cables and turned the printer over, this way the foreign object fell out. Reconnected and all OK. I was going crazy.
LMAO.. I love your videos Kevin!! You have a GREAT sense of humor!!
I have an Epson ET 15000 with an error code 000043. Do you know the solution?? It says to turn the printer off, What I have read points to a paper jam. But I have looked ALL OVER and do not see any paper!! If I fight with it enough, I can get it to work. But I usual give up before that happens. It's so frustrating!
Hello. My WF-7210 makes a click noise and then I get a fake paper jam. Please help
thanks for the help mate
You're hilarious. Very entertaining. I'm wondering if you fix Canon printers... if it's worth sending it in? A friend will give me a good deal on a pro1000 if I can get the door open Error fixed. He had contacted Canon and they said they can't diagnose it unless it has ink in the cartridges lol. Well there's no ink in but I can fill them up a little bit with non OEM ink. And I'm wondering if it's the sensor or something that's an issue whether it can just be cleaned or something like I've seen in other videos. A little WD 40. Or if it needs to be sent in or something. Thanks!
Seriously
😹😹😹
That's actually really funny
😂😂😂😂😂😂😂