How to Install Vauxhall/Opel - Astra- Insignia- Mokka- Retrofit Reverse Camera Kit -
Вставка
- Опубліковано 30 лип 2023
- You can buy self install kit or you can ask them to install for extra pay.
Click link hmiretrofits.co.uk/insignia-h... - Авто та транспорт
Hi where did you get the yellow wire from? Thank you
Are you can do this for the parking sensor as well, for example my insignia don’t have a parking sensor, but if I want install how I can do, the parking module how I can connect to the car?
How did you fit the camera cable through the boot from the outside into the inside where the rubber grommet is? You cut the footage there 1:37
You don't connect the red wire of the video cable, I see that you haven't used it, and I wonder why? Isn't it necessary to connect it to the reverse gear positive? thank you
It’s possible to do this as well for the front camera?
How to get the camera video to automatically change when reversing. How the switching is carried out automatically? Thank
Good morning, can you send me the connection diagram for the Insignia rear-view camera? I don't understand the connection with HMI. Is the white wire connected to the plug on the inside or outside? then the camera cable on the HMI side to just the RCA plug? THANK YOU

Do you know what cables are speaker cables in that model ?
Seems good 👍can you tell me if this would be the same to do on 2015 insignia 2.0 cdti ecoflex sports tourer ?
yes
Do I need to install software with OBD?
Hi it's very good video, but i didn't understand only one thing, 5.01 min of the video you speak about 4 and 5 pin, so what is blue and what is white, i mean in yellow wear? I mean i need to do that important yellow wear.
It for video output
Hello, can a better camera like yours be installed instead of the original one. I have a bad picture, it's blurry... can I also connect it or do I need some more modifications? I have a 2014 Opel Insignia Sports Tourer
Yes you can but if your camera is blurry it can be lose or wrong connection.
@@DBTECH-nr9vb I think that my camera lens let in dust or moisture... somehow the image seems to be of lower quality (brightness and sharpness).
And even when they are new, they seem to have a weaker display compared to some others. Am I wrong?
I have a 2014 Insignia OPC/VXR and a did everything that you did but my camera doesn't work. They told me that I have to programming my system to recognised my camera. I don't understand why is your camera is working and mine is not?
That is a good question. Maybe his HMI already had camera feature unlocked. But usually HMI has to be programed in order to recognize camera.
But generally I would like to get answer on this question also.
Sorry bei Funktioniert das überhaupt nicht mit der pin Belegung fahre Opel Insigna Sport Tourer 2016
You also do not connect the positive of the video cable to the HMI module, I understand that the red cable must go to the positive of the module, why don't you do it, can you clarify for me?
There is no red wire cutted from cable,can see in video 00:22.This kit is modifed for insignia included black wires one is earth and second in reverse light,
I see in the video 0:22 that the yellow RCA connector video cable has a red cable that is cut, because that's how it is, that is the positive one that goes to the radio or HMI module and the other end to the reverse cable, because Do you have it cut?@@sajkasimvlogs2791