Vauxhall Insignia Service Vehicle Soon Message

Поділитися
Вставка
  • Опубліковано 3 гру 2024

КОМЕНТАРІ • 303

  • @horaciomic
    @horaciomic 2 роки тому +8

    I've had an Astra J 1.7 cdti for 10 years, and about the Service coming soon, I'll leave a tip.... test the glow plugs....90 percent of the time, it's a burned out candle....

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      Thanks for sharing

  • @davehughes6501
    @davehughes6501 5 років тому +15

    Service vehicle soon is for engine faults only. If the abs or airbag system is faulty a service abs system warning will display instead.

    • @GicaPhp
      @GicaPhp  11 місяців тому

      Thanks for the tip

  • @geraldframpton9250
    @geraldframpton9250 6 місяців тому +3

    Excellent, even 2 different garages couldn't solve this 👍

    • @GicaPhp
      @GicaPhp  6 місяців тому

      Glad it helped

  • @alejaz8403
    @alejaz8403 2 роки тому +1

    Mine was vacuum pipe on Vauxhall astra. 2011 and turbo kicking in perfectly and driving good again no limo mode now

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      Thanks for sharing

  • @PL-fc6hm
    @PL-fc6hm 2 роки тому +1

    it's normally glow plug pressure measurement sensor in diesel vehicles which is part of the glow plug itself.

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      Thanks for sharing

    • @PL-fc6hm
      @PL-fc6hm 2 роки тому +1

      @@GicaPhp you're very welcome and thank you for making this video.

    • @tyronegarey1419
      @tyronegarey1419 2 роки тому

      Glow plug pressure measurement sensor ? I have this service vehicle on my dash is it a easy fix ?

    • @PL-fc6hm
      @PL-fc6hm 2 роки тому +2

      @@tyronegarey1419 yes it's glow plug and has a built-in cylinder combustion measuring sensor. it could also be the glow plug side of it itself. a quick scan will show which one is faulty. they are quite expensive at around upward of £100. you need a 12mm deep socket and a torque wrench to torque it to 10nm. it's a 5 minute job.

  • @ilenitudor7745
    @ilenitudor7745 3 роки тому +3

    I happen also for my Opel Astra J - 2014, 1.6TDCI 100kw. The problem was one of the 4 spark plug.

    • @GicaPhp
      @GicaPhp  3 роки тому

      Thanks for letting us know

    • @morbius7429
      @morbius7429 3 роки тому

      Weird diesel cars don't have spark plugs.

    • @GicaPhp
      @GicaPhp  3 роки тому +1

      @@morbius7429 I believe he ment glow plugs

    • @ilenitudor7745
      @ilenitudor7745 2 роки тому

      @@morbius7429 They have, and they are used at least when starting the engine.

    • @horaciomic
      @horaciomic 2 роки тому +1

      That's usually it....👍👍👍👍

  • @lee.7963
    @lee.7963 Рік тому

    After the faulty part has been replaced do you need to reset code or will it reset its self and stop coming up with service vehicle on dashboard
    My faulty part is the radiator thermostat
    Look forward to your reply

    • @GicaPhp
      @GicaPhp  Рік тому

      I have deleted the fault codes after the repair.

  • @MrVolodymyr
    @MrVolodymyr 5 років тому +3

    Recently I get this message. Check with OBD2 intake pressure and figure out that I get this message when pressure exceed 220 kpa. ECU cut down engine power. So check electromagnetic valve that control bypass valve in turbine. I had a hole in rubber pipe

    • @GicaPhp
      @GicaPhp  5 років тому

      Overboost conditon, nice finding with that hose.

    • @l39clicky51
      @l39clicky51 4 місяці тому

      @@GicaPhpwhat are the costs for fixing this?

  • @thundercity311
    @thundercity311 4 роки тому +2

    Mine has been doing this for some time.Reset it but it came straight back. Got the car serviced yesterday and the Garage found a faulty glow plug. New plug has fixed it. Yippee! 2010 CDTi.

    • @GicaPhp
      @GicaPhp  11 місяців тому

      Thanks for sharing

  • @mihuhih2186
    @mihuhih2186 2 роки тому +1

    hi, sorry for a stupid question, but do you know how this dashboard/gauges/odometer/speedometer/instruments are communicating with rest of the system? Is it CAN, PWM or other? 12v?

    • @GicaPhp
      @GicaPhp  2 роки тому

      CAN-BUS

    • @mihuhih2186
      @mihuhih2186 2 роки тому

      @@GicaPhp thanks for quick reply. do you have any link to any specification/protocol description/packet description for this model of dashboard? I would like to control speed and rpm, but I have only dashboard (I don't have car)

  • @WatcheswithGeorge
    @WatcheswithGeorge 5 років тому +6

    Generally it comes when you have a faulty glow plugs or the turbo pipe is cracked.. of the turbo pipe is cracked the car will loose power and go in to limp mode! After the erasing the code it will come back if you don't address the matter in hand! Thanks

    • @dibasohel1655
      @dibasohel1655 5 років тому

      Watches With George hi so is it safe to drive if service your vehicle soon sign appears ? Please let me know . Thanks

    • @WatcheswithGeorge
      @WatcheswithGeorge 5 років тому

      @@dibasohel1655 If it is indeed one of the glow plugs done .. it's okay to drive like that.. the car needs them to start and also for regenerating the filter particle ! You might have issues starting it if it is very cold outside! Worse case scenario .. car won't start!

    • @GicaPhp
      @GicaPhp  5 років тому

      In the car above, was the crankcase ventilation heater circuit (pins in the connector corroded).

    • @GicaPhp
      @GicaPhp  5 років тому

      @@dibasohel1655 If the message is displayed, it should be looked at it ASAP.

    • @kylahiggs174
      @kylahiggs174 5 років тому

      @@WatcheswithGeorge I had that light with the spanner, it would come on for a while whilst driving then go off again, this happens every few weeks. then this morning the car would not start at all, the engine wouldn't tick over. How do i fix this please

  • @Colin6712
    @Colin6712 3 місяці тому

    You can get this if one or more heater plug " glow plug" has broken, some have a cylinder pressure sensor built in this is where the error comes from when the sensor breaks

    • @GicaPhp
      @GicaPhp  3 місяці тому

      Thanks for sharing this with everyone

  • @paweldudzic9915
    @paweldudzic9915 5 років тому +2

    This massage keeps coming up in my insignia than goes away after few days and comes back on after another few days and so on

    • @Flowzuk
      @Flowzuk 5 років тому +1

      Mine does exactly the same. Prob about a day later

    • @GicaPhp
      @GicaPhp  11 місяців тому

      scan for fault codes, and it will tell you why

  • @romeo3593
    @romeo3593 3 роки тому +1

    Wish i saw this vid b4 I sold my Insignia sri 1.6 turbo. It was a gorgeous car! Had it for 4 yrs, drove like a dream for the first 3 yrs. Then it gave me all sorts of problems. In the end had to get rid of it. Still thanks for ur video, made me nostalgic.

    • @GicaPhp
      @GicaPhp  3 роки тому +1

      :) no worries

  • @nelsonvictory7630
    @nelsonvictory7630 4 роки тому +3

    Thanks for this video. I have the same display in my car, it comes up at intervals when I drive. Can I fix it myself and what is the name of the machine you're using to scan?

    • @GicaPhp
      @GicaPhp  4 роки тому +2

      What is the message displayed?

    • @nelsonvictory7630
      @nelsonvictory7630 4 роки тому +2

      @@GicaPhp A service vehicle soon message as displayed in this video.

    • @GicaPhp
      @GicaPhp  4 роки тому +2

      You will need any cheap obd scanner

    • @nelsonvictory7630
      @nelsonvictory7630 4 роки тому +1

      @@GicaPhp Thanks

    • @bojidarmartinov5949
      @bojidarmartinov5949 3 роки тому +2

      @@GicaPhp no..you will need a good quality obd scanner..not a cheap one otherwise it won't read the codes

  • @gaborkiss2388
    @gaborkiss2388 4 місяці тому

    This message just came up on my car today during driving. I dismissed it, and I managed to get home. Do you know if it is a serious problem, or it can wait a couple of days? The car was fine when I drove it back, and still I have to use it today. I just don't know wether I can drive it or not. Thank you!

    • @GicaPhp
      @GicaPhp  4 місяці тому +1

      You can drive it, but asap get a scanner on and check for fault codes

    • @gaborkiss2388
      @gaborkiss2388 4 місяці тому

      @@GicaPhp Many thanks for your reply!!! I have booked a service into a garage, but the earliest slot is in a week... I hope the car would be fine till then.
      Thanks again!

  • @zuzmozuzmo9299
    @zuzmozuzmo9299 2 роки тому

    Hi! Can you clear the theft deterrent system massage with obd2 scanner?

    • @GicaPhp
      @GicaPhp  2 роки тому

      I would suggest to take battery off the car, charge it overnight and try agin in the morning

  • @l39clicky51
    @l39clicky51 4 місяці тому

    I have an SVS issue on my astra 1.4 turbo. I seem to get it when I drive up the car to 3k-4k RPM. Any ideas?

    • @GicaPhp
      @GicaPhp  4 місяці тому

      you need to scan for fault codes and let me know

  • @154electrician
    @154electrician 5 років тому +1

    I have the svs message on my zafira tourer and also a slight smell of fumes in the cabin , any ideas ?

    • @gazzaoco
      @gazzaoco 5 років тому +1

      Could be anything mine was cylinder 2 glow plug

    • @GicaPhp
      @GicaPhp  5 років тому

      Intake, exhaust or egr leak

  • @yafai29
    @yafai29 4 роки тому +2

    My service light is coming on and when I drive say 50 60 70 mph it loses power what could that be please

    • @sanatatemulta9847
      @sanatatemulta9847 4 роки тому

      ua-cam.com/video/a1ZdJwZD3yI/v-deo.html

    • @GicaPhp
      @GicaPhp  4 роки тому

      Have done a fault code search?

    • @yafai29
      @yafai29 4 роки тому

      George Moraru getting it looked at tomorrow

    • @MrUncaas
      @MrUncaas 3 роки тому

      Same with mine , what was the problem?

  • @diacstefan5260
    @diacstefan5260 8 місяців тому

    I have the same problem showing on the display service needed, and at the same time, the cooler ventilator is starting to run. I was to the mechanic and says it is regarding to be electric or probably a sensor. After 1 year, still not done, they can't find what it is. Any suggestions?

    • @GicaPhp
      @GicaPhp  8 місяців тому

      Did you scan the fault codes? It is possible to have the thermostat faulty, but fault codes would help .

    • @diacstefan5260
      @diacstefan5260 2 місяці тому

      ​@GicaPhp sorted. Was the inside thermostat, which I changed. I understand 9 by 10 is the thermostat.

  • @andrewmoffatt7046
    @andrewmoffatt7046 4 роки тому +2

    Thanks for this my brother put a blow off valve on my Astra gtc it messed up my car so I've took it off and now I have this message and the engine light is on with this blow off valve it was down on power and ran rubbish I've took it off and so if I buy a code reader and clear it it should be ok you just saved me from going to Vauxhall and paying stupid money out so thanks alot

    • @GicaPhp
      @GicaPhp  4 роки тому

      No problem 👍, for engine scan buy any ELM37 Bluetooth from amazon or ebay for £10 to $20 and should be more than enough to pull the engine fault codes.

  • @glmlaurentiu
    @glmlaurentiu 5 років тому +1

    Salut George, am patit-o si eu cu Zafira Tourer. SVS in dimineata asta, la 203.000km. Maine pun testerul si aflu eroarea. Multi zic despre o bujie defecta. E posibil si senzorul de temperatura filtru de particule, a mea regenereaza enervant de des in oras. Vreo idee? Multumesc.

    • @GicaPhp
      @GicaPhp  5 років тому

      Hai sa vedem ce erori ai mai intai.

    • @glmlaurentiu
      @glmlaurentiu 5 років тому

      @@GicaPhp P0673-00 Bujia nr.3, singura eroare. Inainte ca sa pun testerul, a disparut eroarea (dupa o regenerare pe care am facut-o pentru ca cerea "dezaburire luneta spate" - bineinteles ca nu are legatura una cu alta), apoi, ieri, a aparut din nou SVS. M-am dus sa fac o comanda de un set Beru GE126, dar nu aveau decat o bucata. Am comandat-o si joi imi vine.

    • @GicaPhp
      @GicaPhp  5 років тому

      @@glmlaurentiu Da, eroarea iti arata mesajul reapectiv in bord. Verifica daca e bujia vinovata sau circuitul inainte sa cumperi orice.

    • @glmlaurentiu
      @glmlaurentiu 5 років тому

      @@GicaPhp Multumesc. Bineinteles ca am sa masor totul inainte, dar bujia "e buna luata". In caz ca e dusa cea de pe masina, o schimb cu cea noua, iar daca celelalte 3 au rezistenta dubioasa (la masuratoarea de pe ohmetru) le comand si pe acelea.

    • @ionutzvl1653
      @ionutzvl1653 4 місяці тому

      Salut cum ai rezolvat cu regenerarea, și mie mi se întâmplă des prin oraș , câteodată nu îmi apare în bord dpf full , dar îmi stă turată la 1000 ceva timp cat conduc prin oraș iar apoi revine la normal , mulțumesc

  • @hasanakman6044
    @hasanakman6044 3 роки тому +1

    Hallo, ich habe ein Fahrzeug mit Insignia Baujahr 2016. Es gibt auch ein Opcom-Gerät, aber ich kann die Funktion nicht öffnen. Es gibt einen Tippfehler können Sie mir helfen?

    • @GicaPhp
      @GicaPhp  3 роки тому

      never used the opcom

  • @Ndzila-pl6qw
    @Ndzila-pl6qw Місяць тому

    Hi.. what are the symptoms of a bad petrol pump?

    • @GicaPhp
      @GicaPhp  Місяць тому

      rich mixtures, misfire, non-start, hard starting, lack of power, over fuelling

  • @RiderReview
    @RiderReview 2 роки тому

    I have this on my 2011 Sri diesel. Is there a part u need to change or simply reset it?

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      You need to scan and see what fault code you have

    • @RiderReview
      @RiderReview 2 роки тому

      @@GicaPhp yes fault code came EDC 17C18/19P2282 - Air mass meter. Error Message. This was changed today. However 16miles later same pop up arrived on dash.

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      @@RiderReview perhaps, should have checked wiring, power and grounds before going for a new sensor. I had one a while ago with a blown fuse and another garage changed the maf and fault came back.

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      @@RiderReview also, i would smoke the intake from before the maf to make sure no leaks on intake side

    • @RiderReview
      @RiderReview 2 роки тому +1

      @@GicaPhp car returning to garage for further check next week. They will check, from air mass meter to engine to see any leaks etc.

  • @philpritchard8772
    @philpritchard8772 3 роки тому

    Did you have a wind noise when you put our foot down and speed up ? Like it was under the bonnet near the air vents of the front windscreen

    • @GicaPhp
      @GicaPhp  3 роки тому

      no

    • @reltihfloda7419
      @reltihfloda7419 2 роки тому

      @@GicaPhp my car lost power after I got this message any advice

    • @GicaPhp
      @GicaPhp  2 роки тому

      @@reltihfloda7419 hi, you need to scan it for faults, then based on those faults i can have an opinion

    • @reltihfloda7419
      @reltihfloda7419 2 роки тому

      @@GicaPhp do you think it could be turbine
      I'm hoping not

    • @GicaPhp
      @GicaPhp  2 роки тому

      @@reltihfloda7419 that could be too, scan it

  • @thehouseholder5468
    @thehouseholder5468 2 роки тому

    It’s on my customers insignia because it has a DPF fault and it’s in limp mode, I’ve deleted all the faults and removed the Dpf but I’ve got to get someone to remap it and remove the Dpf from the ecu to cure it

    • @GicaPhp
      @GicaPhp  2 роки тому

      that would work also

  • @jcoutovidal1967
    @jcoutovidal1967 2 роки тому

    Quer disser que tem que se apagar o error, qual é a máquina e a ficha para reprogramar e qual o valor disso. E possível com esse error ter que mudar as velas?

    • @GicaPhp
      @GicaPhp  11 місяців тому

      this is a good machine for small jobs amzn.to/3RSdIWI and spark plug will not give the message, a misfire it could

  • @RUH24A
    @RUH24A 2 роки тому

    Well I ignore this and my car broken down on a motorway. When I parked up 15mins later had a huge puddle of engine oil on the bottom of car. Got car recovered and now waiting next week for it's check up. Any ideas? We think the car is game over

    • @GicaPhp
      @GicaPhp  2 роки тому

      you need to find where the oil is coming from

    • @RUH24A
      @RUH24A 2 роки тому

      @@GicaPhp gearbox it was. Require a replacement. Any suggestions and price

    • @GicaPhp
      @GicaPhp  2 роки тому

      @@RUH24A no idea, sorry

  • @gbwildlifeuk8269
    @gbwildlifeuk8269 5 років тому

    You also get this message when nothing is wrong. Vauxhall are waiting for a programme update (should be this month September) to correct an over sensitive sensor. Same problem with my 2017. Message says fault, no fault found, Onstar statistics says all is ok. Not a problem there but get it checked at main agent. (Mine came on once a week!)

    • @GicaPhp
      @GicaPhp  11 місяців тому

      do you have more info about it?

  • @nedlog1231
    @nedlog1231 3 роки тому

    Hi George. Interesting video. I get the same message all the time
    Where can I buy the maxi elite for my insignia 2011
    Thanks

    • @GicaPhp
      @GicaPhp  3 роки тому +1

      before spending too much money on a diag machine, have you tried a cheap obd reader from ebay, the ones that works with torque app?

    • @nedlog1231
      @nedlog1231 3 роки тому

      @@GicaPhp thanks

  • @MzwandileHarmans
    @MzwandileHarmans 5 років тому +1

    I have the same on my opel corsa 2015. And it doesn’t only show that, the car actually loses power after the message and as I change to higher gears on freeway the speed drops and after sometime it becomes normal. This needs to be addressed, I don’t wanna be burnt in car. This looks like it’s an opel issue.

    • @GicaPhp
      @GicaPhp  5 років тому +1

      Do a systems scan first and see what faults you have and we can talk about it.

    • @MzwandileHarmans
      @MzwandileHarmans 5 років тому

      George Moraru thank you. Will do that

    • @gazzaoco
      @gazzaoco 5 років тому

      Could be anything you need to scan it mine was faulty glow plug cylinder 2

    • @GicaPhp
      @GicaPhp  5 років тому

      @@gazzaoco correct

    • @jamesrooneyy007
      @jamesrooneyy007 2 роки тому

      @Nathan I have the same problem, I want to ask you how was it resolved on your case?

  • @dotcom7502
    @dotcom7502 Рік тому

    I know its many years now. Mine was a split hose ( intercooler/turbo hose ) it had cracked before, 9 month ago, why dont know at all, but message not there anymore, and its only a temporary fix ( gaffatape and strips ) i did, of course i will replace soon. Replacement cheap the hose, pretty expensive for a peace of rubber...

    • @GicaPhp
      @GicaPhp  Рік тому

      i had that before as well

    • @dotcom7502
      @dotcom7502 Рік тому

      @@GicaPhp think someone some day will find this helpfull 😄 i've heard the cause of why it splits/keeps splitting could be EGR-valve stuck close

    • @GicaPhp
      @GicaPhp  Рік тому

      @@dotcom7502 indeed it will be useful

  • @Zorkz
    @Zorkz 2 роки тому

    I have a "faulty" glow plug in my 2013 2.0 biturbo insignia diesel, but I've been driving with the service message for over 2 years and it has not affected performance. I think it appeared because i cold started it too quickly in -25 degrees a few winters ago.
    The local repair shops don't dare to change it incase it snaps, they don't have the proper extractor for it either

    • @GicaPhp
      @GicaPhp  2 роки тому

      Yes, it will drive with the message forever

  • @adaandreea
    @adaandreea 5 років тому

    buna!! de unde ai cumparat aparatul pentru diagnoza??Merge la orice masina?? o zi buna si multumesc

    • @WatcheswithGeorge
      @WatcheswithGeorge 5 років тому

      Nu am luat aparat.. și depinde de buget cu siguranță găsești unulnpa prețul potrivit!

    • @GicaPhp
      @GicaPhp  11 місяців тому

      Iti recomand Laungh x431 Pro merge pe orice masina aproape

  • @robertharris2818
    @robertharris2818 4 роки тому +1

    I had a code come up on my mokka says need service was only serviced 5 months ago I have cleared fault myself and it has stayed off if it comes back on is there a fault thanks

    • @GicaPhp
      @GicaPhp  11 місяців тому

      Codes scan is a good start

  • @donataslucak4051
    @donataslucak4051 Рік тому

    Hello. I have this problem today. And I can't start my engine. It was the power. But not any noise of engine. Only small noises somewhere inside the dashboard.. 2hours later i try and its starts with no problems and any errors. Any ideas? Thank you. Car is vauxhall astra 2011 petrol.

    • @GicaPhp
      @GicaPhp  Рік тому

      battery terminals loose?

  • @stevie2922
    @stevie2922 2 роки тому

    I got this just now on my astra gtc diesel, and right after that the car doesnt accelerate properly not at all even please tell me what to do

    • @GicaPhp
      @GicaPhp  2 роки тому

      scan it for faults and post them here

  • @husnainhabib2911
    @husnainhabib2911 3 роки тому

    I have the same message on my screen(service vehicle soon) and also my coolant fan stays on after driving the car for five mins.
    Any ideas what this is, without looking at the diagnostic machine?
    I’m just hoping it’s not a major fix.

    • @GicaPhp
      @GicaPhp  3 роки тому

      You could have a faulty temperature sensor, or bad head gasket, you need to scan witha diagnostic machine to be sure. Guessing is not good!

    • @griseldaperez8151
      @griseldaperez8151 3 роки тому

      Me podrá dar información en español k se ignifica esa luz x favor

    • @bronaltm9890
      @bronaltm9890 2 роки тому

      I think your car is trying to do a particle filter regeneration and you stop it. If before that, on idle, your instant consumption is 3 l/h instead of 0.6-0.8 that shoukd be the problem...

    • @98mh6074
      @98mh6074 6 місяців тому

      Coolant fan staying on is normal your car is probably after doing a regeneration of your dpf mine does it every so often if I do short runs my car is opel tourer 2016 220 bhp model, so I got it deleted and done a power remap from Avon tuning and car runs like a dream and fuel economy is amazing egr deleted also

  • @christopherduffy7739
    @christopherduffy7739 4 роки тому

    Mines comes up saying service vehicle soon and I haven’t done anything to it and it’s not even showing up anymore do I still take it to a garage

    • @GicaPhp
      @GicaPhp  4 роки тому

      I would do a full scan of all system just to rule out a unpleasant surprise later on.

  • @stephensanders5757
    @stephensanders5757 Рік тому

    Mine doing that now 1.7 and its the temperature sensor and what a pain to get to

  • @gbonciu
    @gbonciu 4 роки тому

    Hi! I have an error right after I start the engine on an Insignia 1.6 Turbo. The error is "Engine Power is Reduced". The car works and there isn't any warning light yet. Can anyone give me a hint where to look? The turbocharger - wouldn't be lack of power? The speed is not limited.

    • @GicaPhp
      @GicaPhp  4 роки тому

      You need to scan for any DTC on all systems, as it may be a pending fault

  • @71shimmy
    @71shimmy 5 років тому +1

    Thanks for that. I have been getting my 2013 insignia serviced every 10000 km or so but not from a main dealer. My mechanic can not turn off this message as he does not have correct diagnostic machine he says I have to bring to main dealer. Main dealer is very expensive. Do you think this is true or maybe there is some other fault???

    • @GicaPhp
      @GicaPhp  5 років тому

      Any OBD scanner can read the engine codes. If none found there you will have to find a scanner that it will read all the other systems like abs, srs, etc

  • @dragosini1
    @dragosini1 4 роки тому

    Salut, am un opel insignia 2.0 din 2008, o am de 3 ani si am cam avut o gramada de probleme cu DPF, acum doua săptămâni am scos o din service dupa ce am reconditionat turbina si am curatat si DPF, astazi mi-a picat din nou, regenerări făcute la timp, mers supraturat, maine o sa ma duc dar bănuiesc ca iar e de la dpf, recomanzi anularea? Am cheltuit cât încă o masina si sunt disperat

    • @GicaPhp
      @GicaPhp  4 роки тому

      Poate DPF-ul a ajuns la sfarsitul vietii? sau ceva il satureaza imediat cu soot (injectoare? Antigel? Ai inspectat cum arata dpf la intrare si iesire? este patat? Daca iti place masina, atunci cred ca varianta cea mai buna este un dpf off si gata.

    • @dragosini1
      @dragosini1 4 роки тому

      @@GicaPhp Am fost cu ea la diagnoza, a iesit senzorul de presiune diferential, dar m-am ciupit repede si am zis sa ma uit daca nu e spart furtunul de la intercooler si chiar asta era, ma bucur ca mi-a trecut prin cap ca baietii deja voiau sa imi schimbe senzorul .Masina imi place foarte mult, probabil la un momentdat cand o sa am niste bani o sa-i fac dpf off. Dar de la ultima oara cand am dus-o in service, mergea impecabil.

    • @GicaPhp
      @GicaPhp  4 роки тому

      Pai daca ai eroare pe senzorul de presiune diferentiala, inainte sa il schimbi il poti proba, ceea ce ai facut si ai gasit o alta cauza. Bravo

  • @catalinamunteanu6787
    @catalinamunteanu6787 4 роки тому

    I have the same message coming up on the screen and the fault has been erased then it appeared again on the dashboard and car losses power will driven... can you advise anything?

    • @GicaPhp
      @GicaPhp  4 роки тому

      Please scan for codes and let me know what codes you've got stored

    • @AAjpj
      @AAjpj 4 роки тому

      Must be dpf

    • @GicaPhp
      @GicaPhp  4 роки тому

      It might very well just be the DPF

    • @mpuchatek82
      @mpuchatek82 3 роки тому

      I have an error P037E with this message, any suggestions?

  • @jam1135
    @jam1135 5 років тому

    I Have this too on my astra. Mines is 29% remaining. Is that bad?

    • @GicaPhp
      @GicaPhp  5 років тому +1

      29% it means your due a service in the near future. But if you get the message on the screen it means you having a fault. Scan all your sistem using a diagnostic machine.

    • @jam1135
      @jam1135 5 років тому

      George Moraru thanks man appreciate it

  • @philipkeane2217
    @philipkeane2217 5 років тому

    Hi I have Vauxhall Astra 1.6 petrol 2013 been serviced last month when I brought it service message comes up so brought it back they found nothing wrong with it and reset it and now service light still comes on but only seems to come on at weekend any ideas please

    • @GicaPhp
      @GicaPhp  5 років тому

      Ask them to scan all the systems (abs, srs, etc), not just Engine.

    • @philipkeane2217
      @philipkeane2217 5 років тому

      Ok thanks

    • @garethlewis2957
      @garethlewis2957 5 років тому +1

      I have the same car, do you find your car sluggish on hills ect? my light comes on and off but can't find no error codes

    • @GicaPhp
      @GicaPhp  5 років тому

      @@garethlewis2957 no, was not sluggish, just annoying message. Have you scanned all your systems?

  • @shawtbaws.1
    @shawtbaws.1 2 роки тому

    How do i turn off speed limit warning on my vauxhall astra 2013

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      No idea, sorry

  • @aleksandrzinkevics1253
    @aleksandrzinkevics1253 Місяць тому

    Top man

  • @ionbismut4300
    @ionbismut4300 2 роки тому

    Problema la mine este solenoid oil control valve. Nu stiu unde sa o localizez pe motor si sa o schimb. Motorul la a mea e diesel 1.3cdti

    • @GicaPhp
      @GicaPhp  2 роки тому

      Da-mi datele masinii (marca, model, an, cmc, kw) si ma uit

  • @kaanrevannn
    @kaanrevannn Рік тому

    Is it possible to clear this error automatically? Yesterday it was giving an error about the adblue system. Adblue error is gone, but after running it for a few km, SVS message appears.

    • @GicaPhp
      @GicaPhp  Рік тому

      you need to scan again for fault codes

    • @kaanrevannn
      @kaanrevannn Рік тому

      I am getting the p1050 error. Checked with the diagnostic device in Bosch Car Service, the error has been cleared, but it reappears. SVS warns only once every time I run it. I think it's a problem with Adblue level sensor. I'll have to change.@@GicaPhp

  • @erozy
    @erozy 4 роки тому

    Hi George, what diagnostic tool you have used in this video? What's the price? If I understand correctly, it scans all error codes, not just engine ones?

    • @GicaPhp
      @GicaPhp  4 роки тому

      At that time I was using Autel MaxiDiag Elite MD802 amzn.to/2BRHirn Now I am using kingbolentool.com/?ref=K3clfpbXCdUw as it is far better than MD802

    • @GicaPhp
      @GicaPhp  Рік тому +1

      @MantasNana1 agree, but I do multi brand, so this does the job just fine. I have upgraded now to a better machine since I made this video as well.

  • @ΚΩΝΣΤΑΝΤΙΝΟΣΔΑΣΣΙΟΣ

    Καλημέρα σας.Μου ανάβει το λαμπάκι του κινητήρα και δουλεύει μόνιμα στην δεύτερη σκάλα το βεντιλατερ.Μηπως γνωρίζει κάνεις κάτι; Αν είχε παρόμοια βλαβη;

    • @GicaPhp
      @GicaPhp  Місяць тому

      coolant temperature sensor faulty or electric thermostat open circuit

  • @haliabdullah3770
    @haliabdullah3770 2 роки тому

    How can I contact you so I can come to your garage to get it fixed?

    • @GicaPhp
      @GicaPhp  11 місяців тому

      i do not have a garage, i work in a main dealer

  • @bernardjohnston819
    @bernardjohnston819 5 років тому +1

    Just. Bought 09 2.0 cdti can you pop up and clear it pal

    • @bernardjohnston819
      @bernardjohnston819 5 років тому +1

      And to say it’s 160 bhp it’s seems slow ........

    • @GicaPhp
      @GicaPhp  5 років тому

      Where are you from?

    • @minhajuddin6607
      @minhajuddin6607 5 років тому

      George Moraru are you in londn

    • @GicaPhp
      @GicaPhp  5 років тому

      @@minhajuddin6607 No.

    • @GicaPhp
      @GicaPhp  5 років тому

      Where are you from?

  • @pascu.deniss
    @pascu.deniss 5 років тому

    George presupun ca esti roman dupa nume, Moraru as avea nevoie de ajutorul tau, detin un opel insignia 2.0 diesel si cand sar de 3 mii de turatii imi apare eroarea asa cu service vehicle soon, ce pot face? se poate sterge din softul masinii?

    • @GicaPhp
      @GicaPhp  5 років тому

      Eroarea poate fi stearsa, insa va reaparea daca nu este eliminata cauza. Scaneaza erorile si zi-mi ce erori ai, apoi sa gasim cauza si sa o remediem.

  • @sawyer111081
    @sawyer111081 3 роки тому

    I have this message on my Vauxhall Astra GTC, I had an oil service and it came straight back on, garage scanned it and said it was the dpf blocked, got this to do a forced regen, it went through and the message was cleared, it came straight back on, now been told it is one of the glow plugs needs replacing, does this sound about right?

    • @GicaPhp
      @GicaPhp  3 роки тому

      Any fault code in the Engine ECU will flag the "Service Vehicle Soon" message.
      Scan for fault codes and post them here so we can have a chat about them.

  • @Pakistanmypassion
    @Pakistanmypassion 5 років тому

    I have same msg then it does not accelerate properly. When I reset it's good .

    • @GicaPhp
      @GicaPhp  5 років тому

      What fault codes you have stored?

    • @Pakistanmypassion
      @Pakistanmypassion 5 років тому

      @@GicaPhp will never buy voxhall again just give it away
      Thanks

  • @sameersalaman
    @sameersalaman 4 роки тому +1

    For me it was the thermostat

    • @GicaPhp
      @GicaPhp  4 роки тому

      Thanks for letting us know. :)

    • @realaz1691
      @realaz1691 3 роки тому

      Hey please could you help me in telling what issues you were having!? As I have the same problem I bought the vehicle a few days ago and some one ripped me off by not telling me the car was faulty!
      I have a similar issue:
      I have a Vauxhall zafira tourer Sri CTDI 2016 automatic
      1) at times ‘reduced engine power’ message appears out of the blue I restart the engine and it’s gone.
      2) when I rev hard at motor way, the pedal is a bit hard and the car isn’t on limp mode but I can feel it it’s dragging itself and revving high probs wasting fuel I guess! A message comes up ‘service vehicle soon’ etc
      Took it to Vauxhall showroom and they came with 2 codes P00B7 and P017B
      they are telling me to replace the thermostat and the temperature sensor but don’t guarantee it will fix it but they are telling me the readings are wrong and it’s definitely the thermostat. £400 just for labour is insane ??? And £200 for a thermostat and a sensor! And a £120 diagnostics charge. A whopping £700+ bill and no guarantee.

    • @sameersalaman
      @sameersalaman 3 роки тому

      Just new thermostat fixed the issue ، cost me £200 part and labour.

  • @deniserek9695
    @deniserek9695 2 місяці тому

    My fault was MAF Sensor
    I replaced the sensor and deleted the fault but the service vehicle soon light is coming back i already deleted it 3 times it keep coming back but i fixed the problem i had

    • @GicaPhp
      @GicaPhp  2 місяці тому

      Then you might have another issue going on, did you scan for fault codes after?

  • @adrianbarnes3674
    @adrianbarnes3674 2 роки тому

    I disconnected my battery for 5mins & when I reconnected it this SVS fault warning disappeared

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      thanks for sharing the info

  • @vasilelucianjiboc3476
    @vasilelucianjiboc3476 5 років тому

    Salut..am si io la insignia P0234 overboost..si daca opresc si iau contactu nu mai ami apare..ce ar putea fii..acum de un pic de timp vad ca nu mai ami apare..ms!!

    • @GicaPhp
      @GicaPhp  5 років тому +1

      Verifica daca geometria variabila se misca foare usor (tija deconctata) fara nici un fel de impediment. In cazurile intalnite de mine vinovatii au fost doar geometria variabila sticking si actuatorul pentru geometria variabila.

    • @vasilelucianjiboc3476
      @vasilelucianjiboc3476 5 років тому

      @@GicaPhp ok ms mult

  • @mickbrown5883
    @mickbrown5883 5 років тому

    I have the same message on a Vauxhall Mokka and the code is p003a. Any idea what that means?? I am sick of diesels!!!

    • @GicaPhp
      @GicaPhp  5 років тому

      Hi Mick, in your case this error is telling that there is a problem in the position of the turbocharger vanes not reaching the desired position. This could be caused by quite a bit of problems. Most commons being sticking vanes in the turbocharger, vacuum lines split, solenoid faulty or if it an electronic turbocharger boost control can be the unit itself along with many others like wiring, corrosion, soot etc up to ECM.

    • @gbwildlifeuk8269
      @gbwildlifeuk8269 5 років тому

      You can have the same problem with a petrol engine

  • @TheGazza636
    @TheGazza636 3 роки тому

    Scanned mine no faults found.still have message though.

    • @GicaPhp
      @GicaPhp  3 роки тому

      Have you scan all systems? or just the ecm? whaty machine have you used?

    • @TheGazza636
      @TheGazza636 3 роки тому

      It would appear the scanner we have is only gm car models not uk vauxhalls

    • @GicaPhp
      @GicaPhp  3 роки тому

      @@TheGazza636 just go to a garage to do a full scan then

    • @zeppo08
      @zeppo08 3 роки тому

      I also have a message time to time, no codes found with my ODB-scantool. But my problem is faulty parking radar. Wireloom is broken. There is no generic codes for that but i take it to my Opel-dealer and with their scantool they figure it out. Just go to your Opel-dealer, they will scan whats wrong.

    • @zeppo08
      @zeppo08 3 роки тому

      Oh have to mention.... i got my Opel J 2011 sports tourer 6 months ago. Really nice car so far. Faults that i have found were faulty boost sensor(faultcode P0236, sensor renewed), broken radar wireloom(no code, renewed near future), faulty valve cover(faultcode P0171, cover renewed) and faulty purge valve(no code, LTFT and STFT both 20-30% with obd-scantool livedata, valve renewed, valve was stucked open causing lean condition at idle). At this time im planning to put a PCV Fix kit from Cruzekits.com, already ordered.

  • @sameersalaman
    @sameersalaman 5 років тому

    I have this massage and the cooling fan keep running even on a cold engine its astra 1.6 petrol

    • @CLIFTYPOPS
      @CLIFTYPOPS 5 років тому

      You need the Thermostat Housing replaced and maybe Pipe

    • @sameersalaman
      @sameersalaman 5 років тому

      @@CLIFTYPOPS done it thanks

    • @samzub1
      @samzub1 4 роки тому

      @@sameersalaman Did this fix the problem? I'm having same issue with 1.6 Astra Estate 2013

    • @sameersalaman
      @sameersalaman 4 роки тому

      @@samzub1 change the thermostat

    • @sameersalaman
      @sameersalaman 4 роки тому

      Can do it yourself 😉

  • @valerijsmal1210
    @valerijsmal1210 2 роки тому

    This message means that you have broken one or more glow plugs, thats all. You need to replase broken glow plug.

    • @GicaPhp
      @GicaPhp  2 роки тому

      Mine had different fault ;)

  • @TheRadraku
    @TheRadraku 5 років тому +1

    I was at the light today in the wrong lane .... so i put it in drive and as soon as the green going to yellow on other side I accelerated fast and furious like ,so i cut in front( had a long f day) so as i was accelerating i recive this message service soon and my car wouldn’t accelerate when i press the pedal just very slowly and the rev went up with every pedal touch.... next thing i call my mechanic asking for advice (im crap at how everything works) he told me pull to over switch off then start on again..... i did that and the car goes super smooth , message appears again .... but now does not appear no more..... it just happened so not sure what that might be..... maybe trying to spin the wheels on a 2l auto diesel is too much🥺😁?

    • @GicaPhp
      @GicaPhp  5 років тому

      Just scan for stored errors and see what comes up. When you have accelerated hard, the engine moved and pulls the wiring, the hoses and may cause tensions on one of the connectors or an air leak. I recommend a quick scan to avoid any future problems.

    • @realaz1691
      @realaz1691 3 роки тому

      @@GicaPhp I have a similar issue:
      I have a Vauxhall zafira tourer Sri CTDI 2016 automatic
      1) at times ‘reduced engine power’ message appears out of the blue I restart the engine and it’s gone.
      2) when I rev hard at motor way, the pedal is a bit hard and the car isn’t on limp mode but I can feel it it’s dragging itself and revving high probs wasting fuel I guess! A message comes up ‘service vehicle soon’ etc
      Took it to Vauxhall showroom and they came with 2 codes P00B7 and P017B
      they are telling me to replace the thermostat and the temperature sensor but don’t guarantee it will fix it but they are telling me the readings are wrong and it’s definitely the thermostat. £400 just for labour is insane ??? And £200 for a thermostat and a sensor! And a £120 diagnostics charge. A whopping £700+ bill and no guarantee.

    • @GicaPhp
      @GicaPhp  3 роки тому +1

      @@realaz1691 can you give me the reg of the car?

    • @realaz1691
      @realaz1691 3 роки тому

      @@GicaPhp can you send me your email so I can give you my car Reg? it’s a Vauxhall zafira tourer diesel Sri automatic

    • @realaz1691
      @realaz1691 3 роки тому

      @@GicaPhp i have got the thermostat changed alongside the cylinder temp sensor from the main Vauxhall but it he issue is still there.
      Now all a sudden they are saying to me
      To the the o2 oxygen sensor + 1 glow plug which is faulty. Oil pressure switch They told me to replace all 4 glow plugs.
      Cost is another £684 inc VAT total thieves!!
      P0135 o2 sensor heater circuit bank 1 sensor 1 component defective
      P06DE engine oil pressure low component remains closed
      P2A00 o2 sensor bank 1 sensor 1 malfunction
      These are the new stupid errors! Can you help in anyway and main declares are keep on ripping me off. They are saying there is nothing wrong with turbo pipe or in take valves etc.
      -

  • @td6369
    @td6369 5 років тому

    What does this light mean on vauxhall astra been serviced recently

    • @GicaPhp
      @GicaPhp  5 років тому

      It means there is one or more DTCs on one or more system, you need to do a full systems scan

    • @youlittlerocket
      @youlittlerocket 4 роки тому

      @@GicaPhp what is a DTC?

    • @GicaPhp
      @GicaPhp  4 роки тому

      @@youlittlerocket diagnostic trouble code

    • @youlittlerocket
      @youlittlerocket 4 роки тому

      @@GicaPhp 👍

  • @AKMCars
    @AKMCars 5 років тому

    Frate?Am P2282 si am schimbat furtunu, ce dracu ar mai putea fi?

    • @GicaPhp
      @GicaPhp  5 років тому +1

      maf, map, alte furtune sau galerie de admisie sparte, garnituri care nu etanseaza. trebuie rabdare si verificat cu atentie

    • @AKMCars
      @AKMCars 5 років тому

      @@GicaPhp Map? ce e acesta? maf e debitmerru parca

    • @GicaPhp
      @GicaPhp  5 років тому +1

      @@AKMCars MAF - mass airflow meter,
      MAP - manifold absolute pressure

    • @GicaPhp
      @GicaPhp  5 років тому

      @@AKMCars ce coduri de eroare ai la motor?

    • @AKMCars
      @AKMCars 5 років тому

      @@GicaPhp bujiile arse cu senzor alea scumpe , p03A7 , p03BB, p03b1 , p2282 (asta apare camd vrea el...il sterg , data viitoare cand sa pornesc apare iar svs service vehicle soon si cpdu p2282)

  • @ConstantinIsac-iy9li
    @ConstantinIsac-iy9li 5 місяців тому

    Si eu am aceiasi problema ce trebuie sa fac

    • @GicaPhp
      @GicaPhp  5 місяців тому

      Scaneaza si vezi ce erori ai

  • @markstevenson9630
    @markstevenson9630 3 роки тому

    Thank you

    • @GicaPhp
      @GicaPhp  3 роки тому

      You're welcome

  • @dincaiulian8808
    @dincaiulian8808 2 роки тому

    Noroc am aceeași problema numai ca scanerul după ce șterg erorile îmi apare iar după o zi de exemplu..... Am un scaner mai ieftin data trecuta am avut unul mai scump la 100£ și ceva gen ca al tău.... Dar cu scanerul asta tot îmi apare eroarea

    • @GicaPhp
      @GicaPhp  2 роки тому

      Ce erori a gasit scanner-ul?

    • @dincaiulian8808
      @dincaiulian8808 2 роки тому

      @@GicaPhp nu îmi spune scanerul asta ieftin doar șterge erorii dacă sunt.... Celălalt îmi arata

    • @dincaiulian8808
      @dincaiulian8808 2 роки тому

      @@GicaPhp cred ca dau comanda pentru celalalt

    • @GicaPhp
      @GicaPhp  2 роки тому +1

      @@dincaiulian8808 ce model?

    • @dincaiulian8808
      @dincaiulian8808 2 роки тому

      @@GicaPhp Autel Diaglink OBD2 Code Reader (DIY Version of MD802) All Systems/Modules Diagnostic for ABS, SRS, Engine, Transmission, with EPB, Oil Reset

  • @realaz1691
    @realaz1691 3 роки тому +1

    For me:
    I replaced thermostat and cylinder temperature £650 including labour
    DIDNT SOLVE THE ISSUE!!
    now they are replacing the o2 oxygen sensor and faulty glow plugs along side oil pressure switch.
    Let’s hope it fixes the issue. If it doesn’t it’s definitely a cracked turbo pipe.

    • @GicaPhp
      @GicaPhp  3 роки тому

      I don't get it, so you accelerate hard for 10 seconds, the car goes into limp mode, and they changed the thermostat?!

  • @Brunosdad
    @Brunosdad 3 роки тому

    Mine turned out to be the glowplugs although my

    • @GicaPhp
      @GicaPhp  3 роки тому

      yes, it will flash same fault

  • @kaled12kaled
    @kaled12kaled 3 роки тому

    How match maxidiag elite

  • @zarrow50
    @zarrow50 Рік тому

    I thought that just meant a service was due

    • @GicaPhp
      @GicaPhp  Рік тому +1

      Not this time :)

    • @zarrow50
      @zarrow50 Рік тому

      @@GicaPhp I got that message, Timing belt snapped a week later

    • @GicaPhp
      @GicaPhp  Рік тому

      @@zarrow50 i am sorry 😞

  • @lisachrister9990
    @lisachrister9990 3 роки тому

    Had an Astra J with is. Glow plug. I was....bye bye Vauxhall, hello Kia.

    • @GicaPhp
      @GicaPhp  3 роки тому

      Diesel? or Petrol?

    • @lisachrister9990
      @lisachrister9990 3 роки тому

      @@GicaPhp Glow Plugs was diesel....I was told it wasn't an expensive job but tricky and it tricky goes slightly wrong and thats not difficult to get wrong....it becomes expensive.

    • @GicaPhp
      @GicaPhp  3 роки тому

      @@lisachrister9990 Yes, if a glow plug would snap when tying to take it out, would turn the repair into a nightmare

  • @florinmihasan5510
    @florinmihasan5510 4 роки тому

    Eu când am avut această eroare în bord a trebuit să schimb o bujie dinacea cu senzor

    • @GicaPhp
      @GicaPhp  4 роки тому

      Da, sunt multe cauze. :)

  • @diyardogan7229
    @diyardogan7229 4 роки тому

    Where help full

    • @GicaPhp
      @GicaPhp  11 місяців тому

      Hope it helped

  • @cengizb8746
    @cengizb8746 4 роки тому

    Coming back again

    • @GicaPhp
      @GicaPhp  4 роки тому

      Your fault is coming back?

    • @cengizb8746
      @cengizb8746 4 роки тому

      @@GicaPhp yes

    • @GicaPhp
      @GicaPhp  4 роки тому

      @@cengizb8746 Scan for faults and let me know

    • @cengizb8746
      @cengizb8746 4 роки тому

      @@GicaPhp
      I have no fault code on engine.
      I have 8 fault codes for monitor, I can not see what it is. But when i remove engine fault then goes too service indication passing away, but its coming back after 1 day.

    • @GicaPhp
      @GicaPhp  4 роки тому

      @@cengizb8746 what fault codes exactly?

  • @javediqbalsalim7800
    @javediqbalsalim7800 Рік тому

    Ive got the same message but it goes into limp mode
    Any information

    • @GicaPhp
      @GicaPhp  Рік тому

      You need to scan it for fault codes, and let us know

  • @98mh6074
    @98mh6074 8 місяців тому

    I have vehicle service soon fault on dash board when I start got it diagnosed Nd said no 2 and no 4 glow plugs were were showing to much voltage so changed battery and glow plugs and problem still there any help be great ?

    • @GicaPhp
      @GicaPhp  8 місяців тому

      Fault codes?

    • @98mh6074
      @98mh6074 6 місяців тому

      ​@GicaPhp Fault codes was glow plug 2 & 4 showing up high circuit voltage even after replacing them