Been meaning to do atleast a VB/Deep Pan also, but with money how it is now.. it’s just hard to make myself, since there’s no current issue with trans. Maybe I’m the owner of one of the 1% of 68s that can handle outrageous numbers, all stock. (LOL: KNOCK ON WOOD!)
I just rebuilt my 68rfe myself. The Casing cracked from pan all the way around to the pan. I put the bd diesel kit with the extra od/ud clutches and dpc triple converter. Truck doesn't feel like the power is making it to the tires. I couldn't even tell I put that converter in it. The bd diesel valve body plate makes you drill a hole in the valve body I'm wondering if that is bleeding off my line pressure
Where can we order an Ethan Patterson valve body and is the one you put in specific for towing or how can we order the same one? I need to do the exact same upgrade to my 68RFE so this video was perfect...thanks guys!
I hope not to need anything else for my 68rfe other than tunes when I get rid of the h&s mini maxx. That's a sweet looking vb though. I will be excited to see how it holds up with more use in the future. Hopefully you can update us at the next fluid/filter change for it.
I would consider doing a valve body on my 08 but I don't have a scan tool that can do the re-learn, and the amount that you need for a scan tool that can do that is just ridiculous
I have a question I've been out of the diesel truck market for quite a while looking at buying a new one what kind of tuner or readout do you have there on the dash and do you have to do anything extra to see the line pressure
@@horsetorquesdiesel who tuned your truck? I have an efi live tune going on but I do not like how trans acts. Unless I just need to get that valve body and it’ll help it?
Ford fluid? 🤔 might have to try that in my 48re. I got a full billet shaft and triple disk and it feels like there's some slip when I get on it. Sounds like slip that comes from atf+4 ?
I have a 2010 6.7 with 130,000 km on it. Young guy who had it before me tuned it and ran the shit out of it. I had it a week and got some bad shifts and some slipping. Is it worth upgrading my stock tranny or just getting a built one
Honestly I do not know I’d hit up Ethan www.wp-diesel.com/product/wpd-68-vb/15?cs=true&cst=custom&fbclid=IwAR0PkPoLY7DrlYE_617HIa6U_8UyrS3zNXvbJW25W89b6C71fKP2uqUAlJA
I just had a high dollar Suncoast 68 and converter put in my 14...notice it has a flare up or converter locking issue when lightly accelerating ? Any ideas ??
Would you recommend these upgrades for a 6.4 gas 2500 with the 68RFE? Unfortunately my trans went out a few weeks ago and I’m waiting on a new one from Chrysler with NO eta….sucks terribly.
How hard is it to put a drain plug in it, I swear the engineers had to sit down and smoke crack before designing these trucks, my 2007.5 6.7 Dodge Ram 2500 4x4, I've changed so much crap to make things easier to work on. From completing an entire delete, new Black Market Fuel Filter swap out for that junk Plastic Fuel Filter that ended up leaking. New GR Diesel Valve Cover to delete that stupid CCV Filter, a complete AC System, and a few other mods, the next thing is to install the REVMAX Valve Body, get rid of that stupid Plastic Nippele that broke off and helped ruin my Transmission at 188,600mi that I had to replace so I bought the PPE Filter and Steel Nippele, next is a new Transmission Cooler and lines.
Yes absolutely it's fine. That's actually low, when you get to working it hard like a mountain pass 230-250 is normal. My car runs 230-250 oil temps to run more emission friendly. So don't sweat it!
@@horsetorquesdiesel thank you for the response but whats the most boost/hp you would daily drive arp2000 on? would it be better to just get the 625’s off rip
I’ve been a mechanic for over 35 years and I did not know that for a long time I used to leave them off most of the time until one blew out on me I just thought you’d like to know I’m one of them people who loves to keep learning something everyday if possible can’t get enough. Your doing great keep it up love watching your video’s seen them all
@@horsetorquesdiesel Ive used merclll before as a top off but never as a complete fill. Well i lied i did do it once with a lube gaurd fluid converter.
I can live without a drain plug, but what really really pisses me off is a lack of dip stick! My BMW is all electronic and it's fuggin annoying never knowing how much trans fluid I have, gotta pull the transfer case to access the damn fill hole and finger it lmao.
@@horsetorquesdiesel R68RE are you lucky if you get 100Kmiles out of it before blowing up, its not R48RE...dodge went backwrads and made garbage tranny
Ethan built my 68rfe trans a few years ago. ZERO issues ever since. Great guy with an awesome product.
Good to hear man!
I leave the front 4 bolts in the pan. Then pull apart from the back comes out way cleaner & drains nice & easy
Thanks for giving me something to watch at work lol
You can add a drain plug kit to your stock trans pan for about $10. Available at most auto parts stores.
You forget some people can’t weld or know what a tap is
I put the same pan on my 68rfe. It now holds 14 quarts. It was almost 10 with the stock pan. 2015 ram
Glad you have the balls to call out companies for pour designs Devil Dog! Keep pushing forward, love the content!
Thanks!!!
Pour
Been meaning to do atleast a VB/Deep Pan also, but with money how it is now.. it’s just hard to make myself, since there’s no current issue with trans. Maybe I’m the owner of one of the 1% of 68s that can handle outrageous numbers, all stock. (LOL: KNOCK ON WOOD!)
Hopefully times get better for ya man!
Why the music? I came here to watch you install something. The rambling and sarcasm that happens in a shop is the best part.
Hell Yeah Brother 🇺🇸🦅
I just rebuilt my 68rfe myself. The Casing cracked from pan all the way around to the pan. I put the bd diesel kit with the extra od/ud clutches and dpc triple converter. Truck doesn't feel like the power is making it to the tires. I couldn't even tell I put that converter in it. The bd diesel valve body plate makes you drill a hole in the valve body I'm wondering if that is bleeding off my line pressure
if you have facebook hit us up on Wilson Patterson Diesel page ill try to help where i can
Where can we order an Ethan Patterson valve body and is the one you put in specific for towing or how can we order the same one? I need to do the exact same upgrade to my 68RFE so this video was perfect...thanks guys!
Every time he says “Race truck.” I lose it 🤣
Gotta love Dave 😂
hell yaa man nice to see your shops boomin ! keep kickin ass !
Thank you
I have been looking for a deep pan on my 2016 2500 5.7 . Glad to see this video.
Thanks for watching
I hope not to need anything else for my 68rfe other than tunes when I get rid of the h&s mini maxx. That's a sweet looking vb though. I will be excited to see how it holds up with more use in the future. Hopefully you can update us at the next fluid/filter change for it.
Yes as long as I don’t sell it
@@horsetorquesdiesel how's it holding up if you still have it
Second time seeing the video I want to do this upgrade super bad for have a2017 Cummins it’s a automatic transmission
Get it man, Good on you guys for striking out on your own Wish you the best. Its a hard road to go Good shit as always
Thank you
The bypass is a must 17 degrees cooler
Nice video. This looks like a decent valve body 👍🏻
After doing the upgrade, does the trans still have that hard downshift with the engine brake on? Great video!
That license plate is that b&m motors in tompkinsville ky?
Do you have the link for this kit?
www.wp-developments.com/
Can I get links to this upgrade ?
This is why im looking towards a newer 3500 Cummins so i can get away from the 68rfe and try out the aisin
Great Video Josh!!! Keep me posted on the Open House!
Will do
Can you tell us what the parts cost were that you replaced?
I would consider doing a valve body on my 08 but I don't have a scan tool that can do the re-learn, and the amount that you need for a scan tool that can do that is just ridiculous
We offer quick relearn for 50 bucks if you are close by. If not very cautious driving for the first 100 miles
Can you tow heavy loads with the upgrade?
Would you have any idea where aluminum in your oil would come from on a 3rd gen 5.9
Pistons are the only aluminum I’ve seen in oil
Ok thanks
Why is your pressure dropping to 50 psi? Mine never goes below 90 and Ethan said he only sets his units to 200 psi why are you so high?
I have a question I've been out of the diesel truck market for quite a while looking at buying a new one what kind of tuner or readout do you have there on the dash and do you have to do anything extra to see the line pressure
Edge CTS 3 and it’s tuned with EFI live
Did you do a TCM relearn?
Think heat wrap or something look cool on them lines or braided AN line kit
Maybe when the oem stuff fails. I know fleece makes a nice line kit
Where do you guys locate?
I swear, it's like seeing a 4th driveline while performing those trans mods. Lucky!
What 😂?
@@horsetorquesdiesel That 5" intake mod.
What's the purpose of the valve body replacement
More line pressure and less wastage
Are they closed? Been looking for a valve body myself.
is that the edge insight cts3 tuner you have in the cummins?? and is there an update on how that trans is doing now?? thanks!
Trans is awesome, the truck is tuned with EFI live, edge cts3 is just a monitor
@@horsetorquesdiesel who tuned your truck? I have an efi live tune going on but I do not like how trans acts. Unless I just need to get that valve body and it’ll help it?
Will that valve body work with stock, tuning i have to be stock for a week or 2 every other year
Yes it just won’t give the added pressure. I believe Ethan or revmax offer a tuneless option as well
would it be ok to remove the return line and run the engine on idle in neutral for 30 seconds to empty out the pan ?
Would not recommend that
What's the price on the VB and will it be the same for my 2019? Hope the business is doing well!
www.wp-diesel.com/product/wpd-68-vb/15?cs=true&cst=custom&fbclid=IwAR0PkPoLY7DrlYE_617HIa6U_8UyrS3zNXvbJW25W89b6C71fKP2uqUAlJA
230 psi line pressure has no detrimental effects (like ballooning) on the stock torque converter?
Not from what I’ve been told
It’s the drain plug for the win. The stock one sucks
Link to products?
Have 08 3500 code p0218, p0871, will this fix that, what price on doing it.
So my question is does changing those items throw a indicator light on the dash board? I hate check engine lights on all my vehicles.
You have to do a shift lever and trans re learn with a scan tool
Ford fluid? 🤔 might have to try that in my 48re. I got a full billet shaft and triple disk and it feels like there's some slip when I get on it. Sounds like slip that comes from atf+4 ?
Its a randys transmission stage 3
Yep dex/merc is the way to go
I have a 2010 6.7 with 130,000 km on it. Young guy who had it before me tuned it and ran the shit out of it. I had it a week and got some bad shifts and some slipping. Is it worth upgrading my stock tranny or just getting a built one
Can you use those thermal bypass units for the 6.4l hemi with the same trans
And can you use the whole valve body kit on it to
Honestly I do not know I’d hit up Ethan
www.wp-diesel.com/product/wpd-68-vb/15?cs=true&cst=custom&fbclid=IwAR0PkPoLY7DrlYE_617HIa6U_8UyrS3zNXvbJW25W89b6C71fKP2uqUAlJA
Couldn't find wp diesel's website....🙁
www.wp-diesel.com/product/wpd-68-vb/15?cs=true&cst=custom&fbclid=IwAR0PkPoLY7DrlYE_617HIa6U_8UyrS3zNXvbJW25W89b6C71fKP2uqUAlJA
Did you just drain the oil from the pan before switching to dex/Merc? Converter still filled with atf4?
Yep
@@horsetorquesdiesel OK I'll do that. If my trans goes out, I'll unsubscribe. Lol
Aisin for the win! 🥇
I just had a high dollar Suncoast 68 and converter put in my 14...notice it has a flare up or converter locking issue when lightly accelerating ? Any ideas ??
I’d log it and send it to your tuner to check TC slip
Did you need a different tune to run this setup or just the stock file
You need a re tune to get the higher line pressure
@@horsetorquesdiesel ok thank you
Would you recommend these upgrades for a 6.4 gas 2500 with the 68RFE? Unfortunately my trans went out a few weeks ago and I’m waiting on a new one from Chrysler with NO eta….sucks terribly.
How many miles were on the trans when it went out and what type of driving do you do.
@@gregmaggert8561 about two months after I purchased it used it went out. Two owners before me and I think one pulled a larger RV.
@@everlysuniquetimbersawshop what kind of miles were on the truck when the transmission went out?
@@gregmaggert8561 sorry, I thought I said that. 66,000 miles.
Drill a hole in pan next time…..
That’s what I did when I replaced my old pan lol
I did the same thing guys lol. What flimsy piece of junk the stock pan is.
How hard is it to put a drain plug in it, I swear the engineers had to sit down and smoke crack before designing these trucks, my 2007.5 6.7 Dodge Ram 2500 4x4, I've changed so much crap to make things easier to work on. From completing an entire delete, new Black Market Fuel Filter swap out for that junk Plastic Fuel Filter that ended up leaking. New GR Diesel Valve Cover to delete that stupid CCV Filter, a complete AC System, and a few other mods, the next thing is to install the REVMAX Valve Body, get rid of that stupid Plastic Nippele that broke off and helped ruin my Transmission at 188,600mi that I had to replace so I bought the PPE Filter and Steel Nippele, next is a new Transmission Cooler and lines.
Is it normal for your oil temp to be 200F? I saw it on your tuner and that seemed high to me. Maybe it’s normal though
Yep, ... believe it or not 170-205 is common, I thought the same thing when I first got my truck, it kinda worried me at first.
Yes absolutely it's fine. That's actually low, when you get to working it hard like a mountain pass 230-250 is normal. My car runs 230-250 oil temps to run more emission friendly. So don't sweat it!
I have some questions
What’s up
i just bought a 2016 with 165k on it completely stock i want to delete and tune. are there any other supporting mods i need then this trans video?
Head studs as well
@@horsetorquesdiesel thank you for the response but whats the most boost/hp you would daily drive arp2000 on? would it be better to just get the 625’s off rip
Any links
Those r not dust covers there the clip retainers the lines will blow off without them
Thank you for correcting me, I’ll try to touch on that in a future video!
I’ve been a mechanic for over 35 years and I did not know that for a long time I used to leave them off most of the time until one blew out on me I just thought you’d like to know I’m one of them people who loves to keep learning something everyday if possible can’t get enough. Your doing great keep it up love watching your video’s seen them all
what yr is your truck ??
It was a 15
Who do you recommend for trans tuning
What year truck
@@horsetorquesdiesel it's a 2014 3500
So with this mod what hp can you run with out blowing the transmission?
450-500 when used correctly
thx brother
Does anything need to be flashed to the computer?
With this Vb yes
The kit that this company has for 1800ish gets everything you have here correct?
A you gonna have beer bong trike drags
Coming soon 🔥
Wd vs revmaxx? Any clear winner?
www.wp-diesel.com/product/wpd-68-vb/15?cs=true&cst=custom&fbclid=IwAR0PkPoLY7DrlYE_617HIa6U_8UyrS3zNXvbJW25W89b6C71fKP2uqUAlJA
Ethan wins in customer service easy which is why I went with him. To be fair though I’ve never had a revmax vb issue
First time hearing of “WP,” should have listened a little closer in the video.
Thanks for getting back with me. Definitely needs a follow up video.
I thought most all these trucks take atf+4 ?
That’s what the dealer wants but you don’t have too
@@horsetorquesdiesel
Ive used merclll before as a top off but never as a complete fill. Well i lied i did do it once with a lube gaurd fluid converter.
The best upgrade for a 68rfe is a 47/48 re swap
If you hate towing and daily driving a mild build sure
@@horsetorquesdiesel it was a joke lol. I’m with you 100%. Gotta keep them at peak torque.
The fact that most factory vehicles any more don’t have transmission drain plugs is so damn annoying.
Facts!
I can live without a drain plug, but what really really pisses me off is a lack of dip stick! My BMW is all electronic and it's fuggin annoying never knowing how much trans fluid I have, gotta pull the transfer case to access the damn fill hole and finger it lmao.
Anyone have any experience with the Redhorse 68
Few years ago I got some good stuff, haven’t heard of anything from them in years
👍💪
Ram calls for atf+4. Is that fluid better for the 68rfe??
I know my 47rh shifts way better with dex than atf +4
@@alanack67 damn I didn't know you could use it. I might switch
The dexron 3 is better for the clutches. Same with John deere fuild. I mix mine in my 47re
@@BerryMcCaulkiner859 not sure about 68s... 47s are old 727s which are pretty much the same since the 60e
Dex/ merc is what I recommend in 47/48 or 68
I am so glad i have G56 lol
Why, those suck too.
@@horsetorquesdiesel Definitely not the end all be all transmission. PITA to work on and get parts for. Don't even get me started on that POS NV5600!
@@horsetorquesdiesel R68RE are you lucky if you get 100Kmiles out of it before blowing up, its not R48RE...dodge went backwrads and made garbage tranny
Don't do crap like that
Race truck