Just a basic overview of an electronic ignition installation. Stay tuned for part II #farmall #farmallm #farmallfanatic Part II • Farmall M Electronic I...
A great update to the tractor. Electronic Ignition will make that tractor fire up like a cat on hot tin roof. I have to admit, I saw Part 2 before Part 1 but I'm still excited so I went back to see Part 2 again (chuckle). Man, you sure left everyone hanging, didn't ya? (smile). Thumbs up.
I thoroughly enjoyed your video. Excellent how-to narration, and awesome camera shots of this magnificent machine. I wasn't expecting the cliffhanger ending though! 😄
New to your channel. Watch several, but never comment. Gave ya thumbs up on the ones I watched already. Cool info. I learned to drive on a tractor bailing hay at age ten :-)
I respect the whole maintenance free thing , I just think its ironic that the ignition on the 64 304 in our 1200 had been converted, and since I had bought it as an emp proof bov, I put it back to points and condenser. Lol
Wanted to let you know, I just subscribed. Love the videos. Tons of great info. Just purchased my first Farmall yesterday. A 1950 M. I will be making some videos soon for my channel on it. Just wanted to tell you, Great job, thank you and Happy Easter!
How long before those wires get caught on something and pulled off? Especially the one from the switch to the coil, it ought to be routed behind the oil filter at the very least, or along the top of the engine and down like the factory did...
I have a distributor shaft that has a little bit of wobble in it. It causes my points to not always open enough which affects the reliability of the engine starting. Do you think this would work to correct my problem?
I like the magnetos better. I used to crank start a C and Super C. if it was available we would park it on a hill. Points and electronic ignitions require battery voltage to get a spark.
Man, I could never get away with working in a white jacket! Good on ya! I have heard those Pentronix ignitions burn out a lot. What is the trick to preventing that?
Oh man! You left us hanging lol. I dont know alot about IH but I have an opportunity to buy and restore a 656. Is it worth fixing up? What should I offer for it? Thanks for the video and thr tune up lol
William Chambers 656D? That will have the American 282 engine. Guys let the glow plugs go on them and the reverted to ether. Very hard starting engines, but run like a dream. My question is what all does the tractor need?
William Chambers ok, check the gas tank. If he has left it empty, it will most likely be full of rust. So plan on redoing the tank. Thats gonna be the 263 engine. One of the best plowing/working tractors i ever had was a 656 gasser. I have a video of me speed plowing with a 656 gas. If the loader is an IH 2000, its worth about 2000 grand. The tractor itself you gotta find out why it hasnt ran.
I went to try and start my grandfather’s tractor today but unfortunately I need new points. Do you have a link on where I can purchase this setup please
woww ur so brave to deal with that kind of animals!!!! farmall why i cant see my comments ?? do u watch my videos sweety? im subbed ur channel.. sorry if i have been deleting the comments on my channel... but do u think i am cute -? am i cute? ill be there on ur live to flirt and talk with the ppl. ALL MY RESPECT TO YOU !! farm..
this is fascinating, one of the best channels im following :)
Cool! My mechanical knowledge is limited, but I enjoyed watching this.
That is a neat ign. kit. Thanks for sharing!
Found you on James Cox live creams. Watched in full and liked! Great vid! IamACreator
Awesome video very interesting thanks for sharing 😊 👍👍
That's a nice looking tractor learn something every day.
Интересен канал, гледах, коментирах и се абонирах. Нека бъдем приятели!
Wow this is nice!! You are talented!!💕💕💕
Good DIY instructional video. On to the next one. LOL Stay safe.
A great update to the tractor. Electronic Ignition will make that tractor fire up like a cat on hot tin roof. I have to admit, I saw Part 2 before Part 1 but I'm still excited so I went back to see Part 2 again (chuckle). Man, you sure left everyone hanging, didn't ya? (smile). Thumbs up.
Houndsman One yes i did hahaha
This was a very good overview
A great vid, very educational, Thank You For Sharing..
Thank you!
I just love farmall M tractors .
Tom Jones i do too.
Awe you left us hanging good work!
Worlds Okayest Farmer Q.A. was coming over and I didnt have the tech order nearby, so I ran. 😁😁
glad you had that all fixed this year bud.love tthat tractor.stearings done carb done point an every thing and good to go i hope.
Doug Paulson thanks, im happy!
thats a good thing bud.
I thoroughly enjoyed your video. Excellent how-to narration, and awesome camera shots of this magnificent machine. I wasn't expecting the cliffhanger ending though! 😄
Arcane Amusement Haha thank you!
@@FarmallFanaticI have a 715 6 cylinder gas combine I’m getting no spark to the plugs and I’m tired of ignition points..will this work ?
@@ThefarmLife. yes
@@FarmallFanatic ok,where did you order yours?
@@ThefarmLife. parts store...tell them what engine u have
Great stuff man
Nice job, dude!
Oh WOW your fixing it so easy I wouldn't know what to do your Awesome!!!! I came to show support and watch your video Tfs
FabFive Crafts thank you!
You channel is awesome my friend!! really good overview!! dropped a like and full view
Gaming dude thank you will return!
Beautiful video......👌👌👌
Well layed out great video
farmwork686 2017 thanks man!
Well done buddy!
Great job! ;)
Excellent job
Leave us hanging and wanting more. LOL Great information and makes me want to do pertronix more since they backed up their product
120 Acre Wood part 2 coming up lol
Great information
I put a Pertronix Electronic Ignition system on my 1950 IH Farmall Super A a few years ago. Really like it.
Ill never go back!
Me either. An easy fix. I have had mine for a few years now and never had a problem.@@FarmallFanatic
Wow very nice you fix yourself very good
Informative video
New to your channel. Watch several, but never comment. Gave ya thumbs up on the ones I watched already. Cool info. I learned to drive on a tractor bailing hay at age ten :-)
Tracy Betz thats about when I learned.
Fascinating 😎
Sherry Sherry 😁👍
Great job and tips. Here to show our support 😀👍
s2wthemes thank you!
Your property is so nice!!
Hope to see you tonight @730pm Eastern!
Left me hanging my friend. Thanks for sharing. Let's stay connected.
Leland's Treasure Chest Haha part 2 coming up
I wish i knew how to fix this kind of stuff. Wonderful video.
JD Knight7 read and then do....best way to learn.
MR FIX IT EXCELLENT WORK HUN!!!
Nice.😊❤
OH MAN!! I was waiting to hear that thing crank up. LOL I guess I'll have to wait till the next video. Good cliff hanger. lol
Louisiana Aquaponics Haha yep, part 2!
It didn’t start, didn’t it?
Stopping by to say Hi!!
CountryGirl Adventures hello!
Bom trabalho amigo.
Super duper
I respect the whole maintenance free thing , I just think its ironic that the ignition on the 64 304 in our 1200 had been converted, and since I had bought it as an emp proof bov, I put it back to points and condenser. Lol
Cool vid broski
Old Dirty Ninja thanks!
Supported your channel have hit the like and the bell have added this video to my #IAmACreator playlist
👌🏻👌🏻👌🏻👍🏻👍🏻👍🏻
very informative thanks barry
You're welcome 👍
So helpful thank you
You're welcome
Great "How To"
Awesome. Great video. Never seen a guy work on his tractor in a white coat. Maybe I should do that too when I'm wrenching on my M...lol
Lol
Wanted to let you know, I just subscribed. Love the videos. Tons of great info. Just purchased my first Farmall yesterday. A 1950 M. I will be making some videos soon for my channel on it. Just wanted to tell you, Great job, thank you and Happy Easter!
@@rodderbeck1591 thank you! Congratulations on your M! Happy Easter!
The coat adds 10IQ points.
How long before those wires get caught on something and pulled off? Especially the one from the switch to the coil, it ought to be routed behind the oil filter at the very least, or along the top of the engine and down like the factory did...
Already happened
This has been the best investment on my John Deere 60. A set of points used to last for years. Now they don't last an oil change.
Same here...my M screams
Nice tractor
So what tips did they give you for not burning it up? Did I miss that part? Thanks for sharing!
RonBootsFarm my wiring is ass backwards. Plus, im gonna throw on a ballast resistor. 😁
Farmall Fanatic “ass backwards”- is that a technical term? 😂😂😂
I didn't realize they made those conversions for tractors, I know they have had them for small engines for many years.
MissouriOldTimer yea, theyre kinda neat.
I have a distributor shaft that has a little bit of wobble in it. It causes my points to not always open enough which affects the reliability of the engine starting. Do you think this would work to correct my problem?
The spacing between the magnet is pretty critical. Id look at a new distributor.
hi there did you do one on the 756.i have old 806 gazer like to try that..
Mark Cornell i still got points on the 756. I would if i was you.
I like the magnetos better. I used to crank start a C and Super C. if it was available we would park it on a hill. Points and electronic ignitions require battery voltage to get a spark.
By the way, were did you get the rebuilt carb, looking to have my carb rebuilt on my McCormick Farmall H, drop me a line, thank you..
Some of them I do myself n some of them I buy right off of eBay it depends on how much time I have
Wow that was easy ! Thanks for sharing! Oh what happened?
Scott’s Small Farming and Things . Part 2 happened 😁👍
Good video. Hows your weather been.We going to see any field work soon.
James O Brien fields are drying quickly
Man, I could never get away with working in a white jacket! Good on ya! I have heard those Pentronix ignitions burn out a lot. What is the trick to preventing that?
Honestly, dont buy a Pertronix. If you do, make sure you dont stall and leave the key hot.
Thanks for the advice. Was hoping to not fool with points...oh well.
So many parts to learn about! So did she fire?
The Dirt Cheap Homesteader gotta watch part 2 😁
Would have liked to see it fire up,but Thanks for sharing.
Thomas Schmitt Homestead project thats part 2 😁
I would love to see this program for a international 140 positive ground 6 volt
my H died yesterday. like the coil took a crap. running along and then click just like you pushed the kill button in.
Did it restart after u let it cool down?
no just pushed it by hand out of the way to keep working. will look at it after hay and fencing are done.
What type of animals do you have
And do you watch Gerry 6420
Goood
Oh man! You left us hanging lol. I dont know alot about IH but I have an opportunity to buy and restore a 656. Is it worth fixing up? What should I offer for it? Thanks for the video and thr tune up lol
William Chambers 656D? That will have the American 282 engine. Guys let the glow plugs go on them and the reverted to ether. Very hard starting engines, but run like a dream. My question is what all does the tractor need?
Farmall Fanatic It's a gas engine. Hasn't run in a few years. Always parked inside. It also has a loader on it :(
William Chambers ok, check the gas tank. If he has left it empty, it will most likely be full of rust. So plan on redoing the tank. Thats gonna be the 263 engine. One of the best plowing/working tractors i ever had was a 656 gasser. I have a video of me speed plowing with a 656 gas. If the loader is an IH 2000, its worth about 2000 grand. The tractor itself you gotta find out why it hasnt ran.
Farmall Fanatic well the old fella passed away thats why it hasn't moved. Ok I'll check that when I go see it. Thanks for the input man :)
I went to try and start my grandfather’s tractor today but unfortunately I need new points. Do you have a link on where I can purchase this setup please
Ebay
Thank you
Good day So what did this cost you & were did you get it. Thanks
Don Voll go on ebay...80 bucks 👍
5 year warranty don’t twist my arm lol but you left us hanging but I bet it fired right up
Part 2 is floatin around somewhere in my video pile haha
Farmall Fanatic very cool video I learn new stuff on all your videos but we will be waiting for part 2
ua-cam.com/video/h2A6Tqvskm4/v-deo.html
can someone get me the part numbers and what company to order this from. I am finding noting when i try to get help
Go right to ebay
What's the part number for the kit to convert it
Off the top of my head...210204
woww ur so brave to deal with that kind of animals!!!! farmall why i cant see my comments ?? do u watch my videos sweety? im subbed ur channel.. sorry if i have been deleting the comments on my channel... but do u think i am cute -? am i cute? ill be there on ur live to flirt and talk with the ppl. ALL MY RESPECT TO YOU !! farm..
you could have pulled the distributor rotated it and had those wires coming out the bottom, re installed plug wires accordingly
No doubt
The suspense is killing me! Lol.
Massey1105driver not anymore Haha
I get the idea this module a replacement for a burned out module.
Soybean Farmer and as many modules as i can eat for the next 5 years! 😁👍
Still Running this list
looked like it was easy to install...t's,..
Mark Cornell very!👍
OK i'm confused, Electronic ignition but SAE non detergent oil? The gods are going to be angry Grant
That's like saying you're confused because the sky is blue and cars have round tires
are these any good?
Yes!
I was wondering because I heard they burn out easy
Do not get the pentronix and do not leave the key on or the Ignition on with the tractor not running.
Don't leave me hanging!!
H Turbo hahaha 😁
Part 2 coming soon!