MOTO CARBURETOR ON CAR
Вставка
- Опубліковано 5 вер 2024
- This video is to show you how to swap an original Mini Truck carburetor to a motorcycle one. This truck is a Kia Towner (Asia Towner) same as a Daihatsu HIJET. All the parts are the same but some small stuffs like front lights and the dashboard.
Caburetor Motorcycle 250cc
a.co/d/eNHAygz
Choke Cable
a.co/d/4iJoteV
WIX Filter
a.co/d/f7RHX97
Flange
www.ebay.com/i...
20 Pieces Carburetor Main Jet Kit
a.co/d/dnzupsD
Bike Shifter Cable Housing a.co/d/4zYMxSc
Dorman 03336
a.co/d/4vSqjDO
Great video. Lots of detail that I appreciate. My suzuki has a lot of hesitation and I had an idea that a bike carburetor would be the answer! Thanks!
I'm glad you learned something from this video☺️
I dont think the video is too long because you are giving good info the whole time.
😂😂😂jajaja
Erinson so I finally received all the parts to complete the carb swap. It took a little doing to get the radiator hose to fit. But I got it. I haven’t hooked up the choke yet but like you I live in Florida so I’m not worried about it. So everything is in and this was the first time I didn’t have to pump the gas to get it started. Right now I’m in the process of checking timing and trying to dial in the carb. But I was very successful at your carb swap. It started right up and I did swap out both jets like you recommended. My mini is a Diahatsu Hijet 1986 EB60 550cc motor.
Did you got it installed and working? I only use the choke in January and February otherwise it starts right up.
Yes installed and running. I still need to check timing and adjust a little more
ua-cam.com/users/shorts5CNQ4gHNIe4?feature=share
Video installation and running
@@ciroressa7018 make sure you connect the vacuum hoses to the ignition
Erinson I did take care of that. Trying to find another OEM cable because I’m having a little issue getting the bike cable to work perfectly. If I find the OEM cable I’ll modify the original cable I have.
How is it running after a year. If you were doing it all again would you have gone with the 30PE or something different? How is the response and do you have more power and pull through the RPMS.
And this carburetor is very Easy to tune!!
You can use a timing Light and a vacuum gauge to get the exact Set Up.
I didn't have to tune it with a timing light. It worked right after the install
@@erinsonduran6663 Good to know bro!
Please make a Video about The fuel Consumption!! Thankyou
@@kimrowoon2474 I will
Sir where did you connect the return fuel line
I sold it but it still running good 👍
Sir could you please show us the step by step process...Im from Philippines sir and i have my suzuki multicab also....thanks...
@@user-xx9qs3jm6w sorry I sold the truck already
Why did you jet the fuel line before the carb? Was it running too rich before? I have a similar issue.
My guess would be that normally the motorcycle carb is gravity fed into the bowl and then it uses fuel from the bowl to feed the jets, passively. Since he can’t gravity feed it, it only needs enough speed to fill the bowl and keep it full enough for whatever driving conditions. The float stopper presses to stop the flow so you don’t want a crazy amount of pressure and like he says in the video, it was overflowing with the pump. Maybe could use a super weak fuel pump?
Is this idea could help to les the gasoline consumption how many liters in 1km..
I get 47 miles per gallon
Great Video! I just purchased a 1992 Daihatsu Hijet light Dump bed 4x4, locking diffs....i am getting things ready to improve the truck and going to use your idea here. I have turned wrenches on motorcycles for years.....how did you figure out which carburetor size (mm, boot size, etc...?) The truck sounds great!
Let me know how it goes
Show aqui no Brasil instalo de cg150 sport fica top...
Did u do something to ur the flange? Mine is bigger than the carb inlet
I got a bigger one from ebay
www.ebay.com/itm/144467185345?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=nlyaaqzrsj-&sssrc=2349624&ssuid=oKuXgxu1SXu&var=&widget_ver=artemis&media=COPY
Do you still have the original carburetor sir?? If its ok can i have it??? Ill try to fix the carb
Subscribe 🔔 to the channel if you like the content 👍
Hey buddy thanks for the video!!...i bought a 2003 kia metro and it was seized...got it unsiezed and they made a mess with another VW carb...im using your Moto Carb...Can you send me a pic of the vaccume lines running into the ignition or distributor??...they have one ran to the little bell looking thing on the distributor but the other vaccume line is broke and not sure if its the same line you have...i need to see where the lines connect to other than the carb 👍
I sold it but I csn help you if you video call me
Hello! I have a Mazda carol 1990 with the F6A, its a 0.6L(660cc). I did the same setup as yours and it worked! I just can't seem to get the right jets, what size would you suggest for my car?
Thanks alot ✌
What's it doing?
@@erinsonduran6663 In park everything seems fine but when i get on drive the car dosen't have power and seems like its ''flooded'' while accelerating, white puffs here and there, it smells gaz alot.
@@hotot5845you need to have a return to prevent over flooding
i have a return, the car is not over flooding, it just feel that way when i push the pedal. im thinking that the jets are way too rich for my car
@@hotot5845play with the pilot jet, get a bigger one
Where u find this truck? I can't find left hand drive mini anywhere. Thanks brother!!
I got it from an us army auction
Meu grupo de Ásia towner São Paulo SP
Hola hola cómo estás amigo te funciona bien ese carburador de motor en esa mini yo tengo una y quisiera aser la prueba aber como me sale
Hola, si amigo trabaja muy bien ahorra gasolina y no pierde fuerza. Suscribete y Dale like.👍
Ya lo instalaste? Dejame saber
Hi Erinson what's the cc on that engine 660?
This one is not a Japanese version so it is 800cc and the vans are 1000cc. This was made for the Korea and South America market.
@Erinson Duran alright imma attempt this carb swap on my hijet cause a bought the replacement from Amazon and is having the same issue u had thanks for the vid
@@alfredomedero7376 the flange I got is 40mm and the carburetor is 35mm so I cut a Radiator hose to get the 5mm difference between the carburetor and the flange 😊 because the clamp was not enough to get it tight. It is a simple swap. Where are you located? USA 🇺🇸? If you have mountains I recommend a #160 pilot jet. You will need more fuel to go up, in Florida is flat and I'm using a #150. Good luck
There's the 5mm a was missing lol, im in Killeen tx i appreciate the help and the vid
Yes 5mm, I cut a coolant hose and inserted it in the carburetor and then got it inside the flange
How about improvement on fuel consumption?
It does about 40 mpg
So is the carburetor the Pe30 or the PE28, I am going to start doing this swap
PE30 IS GOOD 👍
Thanks,So did you just plug off all the other vacuum lines?
@@alexisbaca2297 not all check the video
Hey, so the jets that you listed in the description the main jets only go up to 140, and you said to use 155. So so am going to order a different set of jets. Do you this style of the jet matters
@@alexisbaca2297 yes order another set.
I think I'm gonna do the same swap on my hijet. My stock carburetor sucks
You won't regret it!!!! It has been working wonderfully
I've never done a carb swap so alittle nervous about doing it cause all the vacuum lines. But I'll follow your video.
@@androdiehl6596 no worries you will be good 👍 where are you located? I. In florida and I never use the choke cable
@erinsonduran6663 I'm in New Jersey I will need it for the winter lol. You think the jets you used will work up here?
@@androdiehl6596 yes it will work perfectly. You will need it there. I installed a different one after the video, here it is
C CLINK Choke Cable W/Boot For HONDA Rancher 350 OEM Carburetor 2000-2003 17950-HN5-671 a.co/d/f6uKg6c
Erinson I have a 86 Hijet S81P with 550cc motor. If I try this do you think I would jut need to use smaller bets or I’ll be able to tune it?
I don't understand your question but I'll work very fine 👌