CUSTOM SHIFTER KART BUILD PART 2: FRAME FABRICATION

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 114

  • @julianmiloespinaluno
    @julianmiloespinaluno 4 роки тому +44

    Please could you give the map with the measurements.

  • @oaagea
    @oaagea 3 роки тому +6

    Hi there.. can you please tell me where I can find this plan?

  • @joshporter5459
    @joshporter5459 5 років тому +7

    Wow. You should be really proud of your work. Well done.

  • @danielvega3062
    @danielvega3062 4 роки тому +12

    Hi, can yo please make a video showing the plans with all dimensions an angles?, I want to get in karting but I can buy one so maybe I can build it, thanks

    • @kobek5272
      @kobek5272 2 роки тому +1

      He had the autocad files for this build in his previous video in this series

    • @mjk4378
      @mjk4378 2 роки тому

      @@kobek5272 idk what you exactly mean but I aim trying to get ahold of those same measurement papers on building one.

  • @diyek1781
    @diyek1781 2 роки тому +1

    About the two bendings on the pipe of the front end where the spindles mount, is the bending so that the front tires level with the rear tires/rear axle? I heard that karts are designed that way to prevent flipping over while on turns or is just to level the front and rear end? Nice work thank you.

  • @jeffdeluca1153
    @jeffdeluca1153 Рік тому

    Great video.. and thank you for NOT using a million jump cuts like many do every three words!

  • @anlsoyuguzel4729
    @anlsoyuguzel4729 3 роки тому +4

    Hey Dude , looks fantastic , you made a uniq vehicle. I see that you have already created 3D of the frame , I would like to ask you that is there any possibility to get the 3D from you to adjust in my workshop , I can send you pictures after all :) ,

  • @BigDaddysYouTube
    @BigDaddysYouTube 5 років тому +1

    Very nice job young man.

  • @daltonbuchanan4833
    @daltonbuchanan4833 5 років тому +3

    How much feet of tubing did you buy?

  • @ronosys
    @ronosys Рік тому

    I did not understand anything you did as I am dead drunk. But dude I really appreciate the hard work you did put in as I myself did it once to get a rd400 chasis ready. Way to go with the Youngs modulus of your chassis. All the best from India 🇮🇳 🇮🇳 🇮🇳

  • @kylekallies3381
    @kylekallies3381 3 роки тому +3

    With the steering I would think about finding some ball baring that would work for less friction

  • @LuisDiaz-kg1fy
    @LuisDiaz-kg1fy 4 роки тому +5

    What’s the type tubing you’re using?

  • @jacobhoke581
    @jacobhoke581 Рік тому

    Where did you get the blueprints? That’s awesome.

  • @stevepatterson2290
    @stevepatterson2290 Рік тому

    question how thick are the side walls of the tubes ? 2mm, 3mm,4mm etc

  • @xxUnReality
    @xxUnReality 5 років тому +7

    Where do you get your tubing from?

  • @deanpurks7474
    @deanpurks7474 3 роки тому +1

    Hi ,
    I found your build page while searching for go-kart plans or if you have any suggestions where to find any i'm looking to build a kart for my grandson. Thanks

  • @raulramosramirez
    @raulramosramirez 10 місяців тому

    Did you use 1” tube or 1 1/4” ? Awesome build !!

  • @middletownriders1843
    @middletownriders1843 7 місяців тому

    Could you use pie cuts instead of a tube bender

  • @kartikeyapaul2061
    @kartikeyapaul2061 11 місяців тому

    how did you find the camber, caster angle

  • @rlcustomsp
    @rlcustomsp 3 роки тому +1

    Congratulations my brother. beautiful project.Would it be possible to send me the project with the measurements for me to try to do here in Brazil? Grateful in advance!

  • @JLemus-ym3el
    @JLemus-ym3el 10 місяців тому

    Ik this vid is old but did you have any problems with warping wend welding

  • @mari-_-1685
    @mari-_-1685 Рік тому

    Can you put the sizing and measurements of the tubes please

  • @gainonten4031
    @gainonten4031 8 місяців тому

    Are you doing MIG welding?

  • @malachim2507
    @malachim2507 5 років тому +2

    Love this video cant wait to see it fully done

  • @iGrizzL
    @iGrizzL 5 років тому +1

    Can’t wait for part3

  • @shehbaznijjar9441
    @shehbaznijjar9441 4 роки тому +2

    what are the mesurements can you please tell me

  • @elinunley971
    @elinunley971 Рік тому

    what do i have to do to get one made !!!

  • @MrRyandross95
    @MrRyandross95 Місяць тому

    Do you have the plans?

  • @jeremysanchez4738
    @jeremysanchez4738 2 роки тому

    why was the kin pin already at 20 degrees?

  • @vnila4-mathieujodoin288
    @vnila4-mathieujodoin288 2 роки тому

    how thick is the tubing?

  • @michaeladameit1446
    @michaeladameit1446 Рік тому

    Is there any was i can buy the blueprints off of you I’m very interested

  • @griffenatekevinbacon
    @griffenatekevinbacon 3 роки тому

    Can i have the measurements to this build? I bought a mig welder kinda wanna have some fun

  • @Brad_Black
    @Brad_Black 2 роки тому

    How much tubing do I need to buy to build this frame? Would really help if you can reply to this :) awesome video btw!!

  • @ppmo8803
    @ppmo8803 Рік тому

    Possible geometry??

  • @matthewfallon2288
    @matthewfallon2288 Рік тому

    There’s a slim Chance you’ll see this but can you release the plans and measurements for the frame if you still have the, cause I’m trying to make my own

    • @D11amee
      @D11amee Рік тому

      I think they are in the description of the first part

    • @matthewfallon2288
      @matthewfallon2288 Рік тому

      @@D11amee i looked at thoes and the 3d files have no measurements of the angles

  • @onbeatmusicgroup6473
    @onbeatmusicgroup6473 2 роки тому

    Would this pass the FIA Karting spec inspection for competition karting?

    • @woozhi9218
      @woozhi9218 Рік тому

      I suppose no but if you dial it to 11 i guess no one gonna know it's a homebree race kart

  • @Muzickification
    @Muzickification 5 років тому +2

    awesome! I just found your channel yesterday and was hoping for a part 2 of this one soon LOL

  • @jgb.vids.2654
    @jgb.vids.2654 5 років тому

    I wonder if I could just get all of those tubes from old bikes

  • @princessfannytv3463
    @princessfannytv3463 2 роки тому

    where we can take measurements?

  • @diyadventures9138
    @diyadventures9138 Рік тому

    Do you sale plans?

  • @steffka269
    @steffka269 5 років тому

    Which tube size do you use?

  • @madsringgren3358
    @madsringgren3358 5 років тому +1

    Well done!

  • @mjk4378
    @mjk4378 2 роки тому

    What’s up man. Anyway you could take pictures of those blue prints and send em to me? I’ve been really interested in building one recently

  • @mainesmith2183
    @mainesmith2183 3 роки тому

    What size tubing ?

  • @adithphilip44
    @adithphilip44 4 роки тому

    Hey what are the outer diameter and wall thickness's of the tubes you're using?

  • @SuperCookieGaming_
    @SuperCookieGaming_ 5 років тому +2

    when is the turbo honda coming back? are we going to get dyno numbers?

  • @vikaspeddina1115
    @vikaspeddina1115 5 років тому

    Which Material are you using for chasis ...

  • @esteracing7049
    @esteracing7049 2 роки тому

    Extreme Replica?

  • @XxPureHashxX
    @XxPureHashxX 5 років тому

    Ive seen popular people use a harbor freight manual pipe bender just fine

  • @colestaples2010
    @colestaples2010 4 роки тому

    Did you design this?

  • @brittenv1000
    @brittenv1000 4 роки тому

    Can i buy those plans?

  • @juanaranda1236
    @juanaranda1236 3 роки тому

    Hola, soy de chile, posibilidad de acceder al plano de ese go karts

  • @patriciocastilloa3527
    @patriciocastilloa3527 5 років тому

    Hello, i am Chilean. I Need make the support for cut tube (1:36)
    You Can tell me how?

  • @AtlasGamming
    @AtlasGamming 4 роки тому

    is that arc?

  • @saviour_rides_and_rides
    @saviour_rides_and_rides 2 роки тому

    Hey dude can u send me the plans for your kart

  • @shanshan5074
    @shanshan5074 3 роки тому

    Please could you give me the measurement on this go kart

  • @rickardbjorling3280
    @rickardbjorling3280 5 років тому

    Awsome great job!

  • @markarvind1404
    @markarvind1404 4 роки тому

    What is the background song?

  • @ExplorewithZac
    @ExplorewithZac 5 років тому

    Would love to know the tubing type and bending tool.

    • @JapandaTuning
      @JapandaTuning  5 років тому

      carbon steel 1-1/4 inch tube 14 gauge bent with a protools bender and die. All info given in my part 1 of this series

    • @woozhi9218
      @woozhi9218 Рік тому

      Would carbon steel hold up the flex when cornering ?

  • @Goodfella6969
    @Goodfella6969 3 роки тому

    Aye I see you wearing Lafayette college I don’t stay far from there we need get together and do some riding with a few ppl on karts

  • @daviddavis9411
    @daviddavis9411 4 роки тому

    Nice work a true craftsman would you be willing to sale the drawing for you build

  • @jdmmenace8378
    @jdmmenace8378 2 роки тому

    Will you made for me a Frame please

  • @willsteirer3281
    @willsteirer3281 5 років тому

    I doubt you’ll see this but I’ll be passing by your area tomorrow. I’d love to meet up and take some pics or something. I have a sunlight silver rx8.

  • @hagentran3332
    @hagentran3332 5 років тому

    Just wondering if you could send my the diagram for this build

    • @vikishe
      @vikishe 5 років тому

      Thank you.

  • @jacobp6679
    @jacobp6679 5 років тому

    Where did you buy the steel tubing and what welder are you using? I've been trying to find a supplier of steel tubing but the only place I can find it is at places like home depot where the only sell select sizes and it is extremely over priced.

    • @The1990Pro
      @The1990Pro 5 років тому

      I’m currently in the process of building a 125cc shifter kart for my senior project. I got 20ft long 1.25in OD, 1in ID tubing for $33 from a local metal place. (Type “metal place” into google maps and one should be relatively close)

    • @PeterArmour
      @PeterArmour 5 років тому +1

      as said in part 1, it is from the Pennsylvania steel company. frame is made of carbon steel round tube 1-1/4 .083 wall, Welder is a hobart handler 140

  • @memy4460
    @memy4460 5 років тому

    where is the third part of the go kart building?

    • @PeterArmour
      @PeterArmour 5 років тому

      bro are you serious?

    • @memy4460
      @memy4460 5 років тому

      @@PeterArmour yes I was. Why are you asking? It was uploaded 2 hours ago and I wrote my question a day ago.

  • @apeboi9775
    @apeboi9775 3 роки тому

    Ikr

  • @alikalany6586
    @alikalany6586 Рік тому

    can we get the dimensions pls??

  • @keithwingfield5101
    @keithwingfield5101 2 роки тому

    Badass

  • @ethanrichert8151
    @ethanrichert8151 5 років тому

    thanks

  • @elinunley971
    @elinunley971 Рік тому

    i need onee!!

  • @ChristianGarcia-in6qj
    @ChristianGarcia-in6qj 5 років тому

    im a 6 foot tall about 200 lbs and using a 450 bmw motor do you think this frame will work for me?

    • @haydentakara4369
      @haydentakara4369 4 роки тому

      Christian Garcia yes just make sure the welds are proper

  • @osmanmachado5501
    @osmanmachado5501 2 роки тому

    Can you sell me your plans I have a personal project?

  • @SR-qg7hw
    @SR-qg7hw 4 роки тому

    The volume of the music makes it impossible to watch on a smart tv

  • @colestaples2010
    @colestaples2010 4 роки тому

    I would spend more time and money trying to get that done then I would spend buying one.

  • @wiawii
    @wiawii 4 роки тому

    Does your dad know you’re using his tools?

  • @colestaples2010
    @colestaples2010 4 роки тому

    It's confirmed I'm an idiot

  • @johnnys3160
    @johnnys3160 4 роки тому

    Could have been great without that Crappy HipHop Gansta crap

  • @tiagocosta9714
    @tiagocosta9714 4 роки тому +1

    what tube sizing did you use?

  • @filipprisecaru2596
    @filipprisecaru2596 2 роки тому

    Hi what size and type tubing did you use?

  • @abdulazizalbastaki1464
    @abdulazizalbastaki1464 2 роки тому

    How long is the axel?

  • @wiawii
    @wiawii 4 роки тому

    Does your dad know you’re using his tools?

    • @PeterArmour
      @PeterArmour 4 роки тому +1

      not sure what your culture is, but here in America, 20 year old people can make money too

    • @wiawii
      @wiawii 4 роки тому

      Peter Armour No shit, I guarantee those are still his dads tools.

    • @wiawii
      @wiawii 4 роки тому

      Peter Armour Here in central Florida we know what the fucks up.

    • @PeterArmour
      @PeterArmour 4 роки тому +1

      @@wiawii considering that is me, I can assure you they are not my fathers tools. They are in fact mine.

    • @wiawii
      @wiawii 4 роки тому

      Peter Armour Sure buddy. Try again