@@cthx4583 no I wanted to copy this guys build but he gave absolutely no resources for all the parts he used let alone a simple schematic for the frame… just another UA-camr trying to scam ppl into buying their crap
New subscriber you are incredible, I have a similar project together with my father and you have motivated me to continue thanks greetings from Celaya Mexico 🇲🇽👋🏽
Hey! So usually I buy from my remnants section at the local metal shop! They charge 1.49 a pound and I would probably us anywhere from 80-150 lbs of metal on a kart! I love to use the square 1x1 tubing! And it usually cost about $1.8-2.25 per foot. I would usually use like 36-50 feet for a project like this. Sheet metal can range but a 4x4 sheet of thin gauge metal might run you like $40-70! Let me know if you have any other questions!
Use a contact tip on the end of the welding gun, it will structurally make your welds safer since it would actually direct the shielding gas at your weld
Attention everyone⚠️⚠️⚠️⚠️⚠️ I have managed to design a very similar kart to what is in this video through sketchup. I will upload the link when I complete the build so I can finalize the design. It will be absolutely free since this guy never posted this one
Is there a reason you chose the same tire width front and back? I’d go for something smaller, but of course your choice. Good looking kart nonetheless 👍🏼 Glad i subscribed
So I think it was a 10in rim in the back and 9 up front. Definitely too big. Lots of float which was great for drifting but I would recommend like 5-6” up front and 8-9” in the back now!
I’d love to build a go kart but I don’t have no tools or money 😂 the money isn’t really the issue tho I’m sure someone is giving away junk scrap that I can cut up and use on Facebook or something but the tools are what I really need especially the welder and me being picky about how welds look I’d probably have to learn tig welding
All the people asking for the damned plans and measurements didn't watch the video. The tape on floor is your measurements!!! EACH BOX IS A ONE SQUARE FOOT PEOPLE!!!
I think I might have spend about $2000-2500 on this build! It adds up quickly when you buy all new parts! Really just depends on the parts and what you need. I think spending about $1800-2000 is a great budget to start with!
those front tires are freaking wide.. holy crap.. lol ... build is looking good. thanks for sharing. i am def making one of these this winter.
Are you gonna post the frame design on your website and are you gonna list all the parts you use? I’d love to copy this build
i wish
@@lefantomeband I bought a engine and metal just for this guy to not post any actual detailed dimensions or anything
@@aeroekins5415 hey did you manage to build a frame
@@cthx4583 no I wanted to copy this guys build but he gave absolutely no resources for all the parts he used let alone a simple schematic for the frame… just another UA-camr trying to scam ppl into buying their crap
I’ve messaged him about it on insta I hope he reply’s if y’all have already build one please share your frame designs with me 😭😭,
Hell yeah! Perfect little ripper 😈
Oh yea! No drift sleeves needed just over pressured 10” tires hahahaha
Very clean build and welding 😍
Dude are you gonna post the dimensions of the kart so people can actually replicate your build??????
Truly the Go Kart God! Wear a resporator next time. Not worth dying for. Awesome video!
The seat adjuster 🤌
Hey mate is there a way to get the plans for the frame really love the design 👌
Wow.........😎
This is very creative amazing 🤩
New subscriber you are incredible, I have a similar project together with my father and you have motivated me to continue thanks greetings from Celaya Mexico 🇲🇽👋🏽
I’m impressed. I want to do this also…
Yo dude we’re still waiting for dimensions and are you gonna make a list of parts??????? You’d be gangsta as hell if you posted them
Please can you say to me the measurements of the body of the car quickly
Hey man tnx for this video ❤️ god bless you 🎉❤️
Appreciate the support!! Thank you man!!
What happen to the design sheet I thought you said it would be in the description 🤔
People don't realize this took 20 welding hours minimum.
where did u by the rear axel ?
and wheels
How much did the metal cost? What type of tubing would you use to build this cart of you had to use it.
Hey! So usually I buy from my remnants section at the local metal shop! They charge 1.49 a pound and I would probably us anywhere from 80-150 lbs of metal on a kart! I love to use the square 1x1 tubing! And it usually cost about $1.8-2.25 per foot. I would usually use like 36-50 feet for a project like this. Sheet metal can range but a 4x4 sheet of thin gauge metal might run you like $40-70! Let me know if you have any other questions!
Hello, what material did you use to make the frame?
Where did you get the rear axle? Or did you make it yourself
Did you ever put the frame design online?
How did you get the hub, tire, and engine components (for example) in Autocad? Did you draw them yourself or are there models that you imported?
Where can i get the dimension for the design
Do you have the plans up on your site ?
what engine did u use?
Are you using inter shield ?
Where are the plans for this build? I'd be very happy to pay for them, but they aren't available on your site. Thanks!
What was your king pin aka caster angle? Yours looked a bit forward.. I went with 18 degrees rearward
I did half inch till back
Looking for top speed
Do you have dimensions or blueprint
Hii what size and thickness of metal did you use to make your frame ?
what platform did you use to design a frame?
I love that popeye shirt
Can you tell me the tire sizes ?
About how much did the frame cost in material?
What metal did you use?
any Kart Plans?
Hey man, what tire and wheel set did you buy?
I believe these are Van-k Rims and Unilli tires!
@gokartgod 8x6?
where can i get the seat and seat adjuster
Wheres the end cone on your welder thats used to shield the gas
Use a contact tip on the end of the welding gun, it will structurally make your welds safer since it would actually direct the shielding gas at your weld
if you don’t know what I mean or if you have a problem/reason for doing so lmk
Don’t some welders just not have gas tho?
@@drewwaddell9302 only if he was using flux core wire.
@@avischoenfeld8040 At 3:20 there is light brown “dust” on the metal where he made a tack, indicating flux of some sort
he's using flux core wire so he don't need tip
how much did the whole thing cost?
Engine
Live axle
Wheels & tires
Is 800 dollars.
Frame the cheapest if weld it yourself
@@briantruck2284 mine was similar
what seat did you use?
what metal is used for the chassis?
how much cost the project
and what aluminium or steel used for the frame
Basic mild steel 1 inch squares tubing & is cheapest way
what angle on the front spindle
What kind of steal do you use?
Which app did you use to design that vehicle.
Sir what is the chamber angle??.... please answer
Attention everyone⚠️⚠️⚠️⚠️⚠️ I have managed to design a very similar kart to what is in this video through sketchup. I will upload the link when I complete the build so I can finalize the design. It will be absolutely free since this guy never posted this one
U said there will be measurements to copy and built it
Yes we are still working on the design it should be available on are website in a few months.
@@GoKartGod I’m guessing very soon then!!
I wouldn't mind a few of your designs if that's ok. I wanna build 1 for me and the kids
When will you have the blueprints available?
I neeeeeeed these wheels and tires, What are the sizes?
Hello i from Ukraine and I want to know a frame size to copy and build kart
Maybe you can give me size???
Can I put a 1wd on the go kart ????
When we can see the frame design?
How did you get the correct angle for the front wheel mounts?
We used an electronic angle finder from Amazon! We will leave a link in the next video description.
what size is the iron?
How long did it take you to build it? Nice craft btw
Thank you so much! Probably took me about 1.5-2 months of work! From ordering parts to riding probably around 2.5 months!
@@GoKartGod do you have a parts list?
What motor is that
It’s a predator 212 motor! If you are international you would look for the Honda gx200!
Therapeutic to watch this
Hello, can you write the sizes on a piece of paper and put them in the Instagram story? The video was great.
Hello, I want to build a kart, can I have the map and dimensions of your kart?
Can you race it? Is it wka legal?
We did not make this kart for racing. But you can rip it on tracks just don’t know how legal it is.
Hello me new subscriber , what you use machine for gokart in video ? 🇲🇨
what is the software you use for de modeling ?
Looks like autoCAD
Please one question, im from Brazil how much HP has the engine ???
6.5
Anyone know the music name?
how tall of a person does this seat?
5 ,11 should be max I guess taller than that might look through his knees
Yes I was 5’11” but I put seat sliders on so you could fit anyone really!
@@sriniketh9142 😂😂😂😂😂
take my order
hey! What design software did you use?
Haha ik you commented this 8months ago but I thought I'd jump in. Its AutoCad! Use this program for work all the time haha
Pasa las medidas del chasis bro
can you link the musics pls
How much money did you spend on that build ???
What are the dimensions of iron?
1 by 1 square tubing 1/8in wall.
Is there a reason you chose the same tire width front and back? I’d go for something smaller, but of course your choice.
Good looking kart nonetheless 👍🏼
Glad i subscribed
So I think it was a 10in rim in the back and 9 up front. Definitely too big. Lots of float which was great for drifting but I would recommend like 5-6” up front and 8-9” in the back now!
I’d love to build a go kart but I don’t have no tools or money 😂 the money isn’t really the issue tho I’m sure someone is giving away junk scrap that I can cut up and use on Facebook or something but the tools are what I really need especially the welder and me being picky about how welds look I’d probably have to learn tig welding
you can set up a mig with a tig torch and tig inexpensively, but you can't weld aluminum with it, look it up on youtube
What is ur website
Link in description or GoKartGod.com
Post dimensions for the frame
All the people asking for the damned plans and measurements didn't watch the video. The tape on floor is your measurements!!! EACH BOX IS A ONE SQUARE FOOT PEOPLE!!!
Thank you for clarifying that for all the people! We did not clarify that enough!!
You can get this off of printerest for no money charge wow
😅
Can u make me one and how much will it be
Me from indonesia , please answerr wkkw
Los vendes?
We are not currently selling them at the moment but in the next year we are hopefully going to have frames available!!
@@GoKartGod 👍👍
Hoe Big is te frame
Pls don't grind structural welds. I had to learn it the hard way...
Not grinding the welds flat can cause stress risers, want to get them flat as much as possible.
How much did it cost to build total?
I think I might have spend about $2000-2500 on this build! It adds up quickly when you buy all new parts! Really just depends on the parts and what you need. I think spending about $1800-2000 is a great budget to start with!