Smart tool

Поділитися
Вставка
  • Опубліковано 20 вер 2024

КОМЕНТАРІ • 191

  • @andysworkbench
    @andysworkbench 2 роки тому +32

    Very clever tool! Thank you for sharing your ideas with us.

  • @somethingelse4424
    @somethingelse4424 2 роки тому +39

    I would like to hear some of the haters give us an example of a tool that can do so many different operations. I'm sure that after 4 years of machining I haven't seen even most tools that are available, but I think this is pretty brilliant. For something that can be made on a Bridgeport and use scrap carbide, it's versatility seems to outweigh it's inefficiency. On a limited budget or in a region without access to commercial tooling, I think this would be indispensable. Or if you had this in your toolbox for a pinch, it might save the day.

    • @Mastermind-
      @Mastermind-  2 роки тому

      Thanks for the info

    • @bigsmoke6189
      @bigsmoke6189 2 роки тому +1

      Very good points

    • @kodysherrer964
      @kodysherrer964 2 роки тому +9

      Not hating on his tool i'm all about diy but as to your comment about never seeing a tool like this, its essentially a basic version of an indexing boring head, they are very handy to have every now and then.

    • @somethingelse4424
      @somethingelse4424 2 роки тому +1

      @@kodysherrer964 is an indexing boring head and indexing boring bar different? Can that tools be inverted in order to do an outside diameter as shown toward the end? Where I work we don't have a tool (aside from end mills) that can make a round on square stock. And in order to use an end mill to do that, you have to be able to circular interpolate...ie have a DRO on your Bridgeport or access to a CNC mill. You can use a lathe, but then you need a lathe with a four jaw chuck. And then you need to indicate a whole new setup on off the mill. I've asked this same question two times and nobody has explained why a boring head would do this.

    • @kodysherrer964
      @kodysherrer964 2 роки тому +1

      @@somethingelse4424 they may be the same thing, usually you add your own boring bar to the indexing head, it has several places to accept tooling for what ever you may need, i've only ever used them to bore id holes this was a really out of the box use, i could probably set it up on the lathe much faster than i could find center do the same in the mill

  • @GnosisMan50
    @GnosisMan50 2 роки тому +10

    As a fly cutter, it's great. As an O.D. turning tool, not so much if you want precise diameters.

    • @stoneomountain2390
      @stoneomountain2390 2 роки тому

      Dial indicator should help with that.

    • @agust8474
      @agust8474 Рік тому +1

      @@stoneomountain2390 or just... you know... getting a lathe.

    • @CharlesSmith-io9fp
      @CharlesSmith-io9fp Рік тому

      @@agust8474 The lathe he used in the video would probably work, if he wasn't highlighting the mill.

    • @jamesspallinger938
      @jamesspallinger938 Рік тому

      @@agust8474 Or boring head....

  • @BrianFreemansPix
    @BrianFreemansPix 2 роки тому +6

    Great tool. I am curious as to why you would waste so much mill time on the first part when you could just rough cut with a band saw and then finish it in the mill.

  • @tomb816
    @tomb816 Рік тому +5

    I think you should tram your mill. Watch from 17:02-17:20. When going right to left, the cutter is contacting the stock on the backside of the sweeping tool. When moving left to right, this doesn't happen. Something is slightly out of square.

  • @alexandrsherbakov9878
    @alexandrsherbakov9878 Рік тому +1

    Прекрасная "балеринка" получилась. Респект Мастеру.

  • @mrdrivermechanictv4213
    @mrdrivermechanictv4213 2 роки тому +1

    Support channel
    Keep on sharing
    Sir

  • @ammamahmudin7214
    @ammamahmudin7214 Рік тому +1

    Briliant !!!
    Thanks for sharing

  • @odairjosemayerthelau812
    @odairjosemayerthelau812 2 роки тому +6

    Amigo, parabéns magnífico trabalho!!! ( Good Job Chow!!!) ❤️👏👏👏👏👍🥀

    • @Mastermind-
      @Mastermind-  2 роки тому +1

      Fico muito feliz que tenha gostado dessa ideia

  • @dennythomas8887
    @dennythomas8887 Рік тому +1

    That could also be used as a boring head, Just put the tool bit on the outside. Nice build!

  • @metriconejkt
    @metriconejkt 2 роки тому +2

    Very good technique skill

    • @Mastermind-
      @Mastermind-  2 роки тому

      Thank you and I am very glad that it was useful to you

  • @HM-Projects
    @HM-Projects 2 роки тому +4

    Nice design, thanks for sharing.

  • @odairjosemayerthelau812
    @odairjosemayerthelau812 2 роки тому +5

    Que trabalho magnífico, bom trabalho!!( What good Job Chow teacher!!) ❤️🇧🇷👏👏👏👏👍🥀

  • @aristeumanczak4469
    @aristeumanczak4469 2 роки тому +3

    Wery good show

    • @Mastermind-
      @Mastermind-  2 роки тому

      I am proud of your opinion
      Thank you very much!

  • @justonetechnicaljustonetec7578
    @justonetechnicaljustonetec7578 2 роки тому +1

    Great job. thanks for sharing

  • @jimbob3227
    @jimbob3227 2 роки тому +1

    I'm not trying to be a hater. It's a clever tool. It does appear that your mill head could use a little tramming in. Judging by how your fly cutter cut with both sides cutting to the left and not to the right. Just trying to help you out. Thanks for the video.

  • @ulysses_grant
    @ulysses_grant 2 роки тому +1

    Awesome work. This really deserve much more views!

  • @sutana26
    @sutana26 2 роки тому +1

    Thankyou for great idea, with this tool you can do excentric turning on a mill

    • @Mastermind-
      @Mastermind-  2 роки тому +1

      Very true!
      I am very glad that it was useful to you and thank you

  • @dlstanf2
    @dlstanf2 2 роки тому +2

    You’ve earned my subscription. Anybody can do aluminum, but steel is real.

    • @Mastermind-
      @Mastermind-  2 роки тому

      It makes me happy, my friend
      Thank you

  • @joseantonioteixeira7974
    @joseantonioteixeira7974 2 роки тому +4

    Ótima ideia, reduz o numero de ferramentas e o tempo de trabalho, muito bom !

    • @Mastermind-
      @Mastermind-  2 роки тому +1

      obrigada
      Estou tão feliz que você gostou

  • @juliovera3826
    @juliovera3826 2 роки тому +3

    Muy bueno ,se vee que sirve la herramienta el video bien echo explicado con lo justo me encantó. Gracias maestro.

  • @DaleepEngineering
    @DaleepEngineering Рік тому +2

    amazing tool you had made

  • @sgtbrown4273
    @sgtbrown4273 Рік тому +1

    Im building one tomorrow 😊 thanks for posting this!

  • @delmarleite4041
    @delmarleite4041 2 роки тому +3

    Great..! I've never seen anything like it...!💙💙💙🇧🇷

  • @tinaliebe5118
    @tinaliebe5118 2 роки тому +2

    Why bye it when you make it very nicely done love the versatility of your tool thanks

  • @howder1951
    @howder1951 2 роки тому +1

    Nice tool and great demo.

  • @lucianovasco4654
    @lucianovasco4654 2 роки тому +4

    Excelente idéia. Parabéns

    • @Mastermind-
      @Mastermind-  2 роки тому

      Fico muito feliz que tenha sido útil para você

  • @kentuckytrapper780
    @kentuckytrapper780 2 роки тому +1

    I'm building myself one of those, thanks for sharing...

  • @digiacomtech5589
    @digiacomtech5589 Рік тому +1

    I love running a vertical mill as much as most machinists do ... but why, after squaring the block, wouldn't you bandsaw out the unneeded area and then use the mill to clean/square the rough cut surfaced. All that unnecessary milling just puts extra ware on the cutter and wastes time.

  • @M15TERIOUS
    @M15TERIOUS 2 роки тому +1

    NO ERA MAS FACIL CORTAR ESA PARTE DE LA PIEZA? luego corregir

  • @mrohny76
    @mrohny76 Рік тому +1

    👍👍👍👍

  • @stringmanipulator
    @stringmanipulator Рік тому +1

    very nice tool ... excellent 😁👍

  • @deilsondocarmocarmo6655
    @deilsondocarmocarmo6655 Рік тому +1

    Excelente ideia de como reaproveitar ferramentas de metal duro (vidra)
    Parabéns 👏👏🇧🇷

    • @Mastermind-
      @Mastermind-  Рік тому

      Obrigado meu amigo e que bom que foi útil para você🙏

  • @Dreddip
    @Dreddip Рік тому +1

    Simple tool, works very well. Looks like you need to tram your mill though.

  • @jaquimboaz
    @jaquimboaz Рік тому +1

    Great job mate. 🛠⚒

  • @marcosbarreto3969
    @marcosbarreto3969 2 роки тому +2

    Olá! Bom dia á todos vcs. Muito bom idéia genial. bacana mesmo. NOTA 10 Shows

    • @Mastermind-
      @Mastermind-  2 роки тому +1

      Olá, meu amigo
      Estou tão feliz que você achou essa ideia útil

    • @marcosbarreto3969
      @marcosbarreto3969 2 роки тому +1

      eu sou! meio oficial de torno. mas trabalho com fresa tam. esse ferramenta é de fundamental importância para quem trabalha com metal mecânica. Ok um forte abraço blz.

  • @otisdavies1861
    @otisdavies1861 2 роки тому

    Excellent tool. Thank you for your video.

  • @caranormas4276
    @caranormas4276 2 роки тому +2

    Du très bon travaille qui mérite d'être reconnu, bravo monsieur.👏

    • @Mastermind-
      @Mastermind-  2 роки тому

      Merci mon ami
      Je suis heureux que vous l'ayez apprécié

  • @greglaroche1753
    @greglaroche1753 Рік тому +1

    Excellent!

  • @kulebyakinjoe
    @kulebyakinjoe 2 роки тому +1

    INTERESTING

  • @muhammadirfanjutt6340
    @muhammadirfanjutt6340 2 роки тому +1

    Excellent job 👍

  • @hobtink
    @hobtink 2 роки тому +1

    Very fine shop-made fly cutting tool

  • @roadshowautosports
    @roadshowautosports Рік тому +1

    I’d love to see what is the smallest outside cut one can do with it?
    Thank you for sharing

    • @Mastermind-
      @Mastermind-  Рік тому +1

      Great suggestion!
      I am sure up to 0.5mm diameter can be done easily

    • @roadshowautosports
      @roadshowautosports Рік тому +1

      @@Mastermind- awesome! Thank you answering my question and sharing your masterpiece!

    • @Mastermind-
      @Mastermind-  Рік тому +1

      @@roadshowautosports Thank you my friend and I am very glad that it was useful for you👍

  • @hosseinsoleimani6341
    @hosseinsoleimani6341 Рік тому +1

    Hi this tool is an interesting idea thanks

    • @Mastermind-
      @Mastermind-  Рік тому

      سپاسگزارم آقای سلیمانی عزیز

  • @rbrown264
    @rbrown264 2 роки тому +2

    nice tool

  • @malkitsingh6537
    @malkitsingh6537 2 роки тому +1

    Excellent tool

  • @greg20152015
    @greg20152015 2 роки тому +1

    Very clever if you only have a milling machine and not a lathe, but very inventive none the less. 👍

  • @aryaka_run
    @aryaka_run 2 роки тому +1

    amazing and innovative.

  • @jamesjimenez8800
    @jamesjimenez8800 2 роки тому +1

    saludos desde colombia ,excelente herramienta ,,,,,

  • @AshishSharma_71
    @AshishSharma_71 Рік тому

    It's gorgeous!

  • @hayathayat1462
    @hayathayat1462 Рік тому +1

    Bravo Turkey İzmir selâm 👍

  • @tonisiqueira9543
    @tonisiqueira9543 Рік тому +1

    Uma ideia excelente mestre 👏🙏

  • @imyaaniggua
    @imyaaniggua 2 роки тому +1

    undercuts are sadly nearly impossible with this

  • @davidsnyder2000
    @davidsnyder2000 2 роки тому

    Brilliant!!!👍

    • @Mastermind-
      @Mastermind-  2 роки тому

      I am very glad that it was useful to you and thank you

  • @kangmull7191
    @kangmull7191 Рік тому +1

    Tenks atas impor masinya ya bang

  • @aryaka_run
    @aryaka_run 2 роки тому +1

    i thought that would be 5 mm, wow incredible.

  • @RixtronixLAB
    @RixtronixLAB 2 роки тому +1

    Nice video, thanks :)

  • @duytranvan642
    @duytranvan642 2 роки тому +3

    🔔🔔🔔👍👍👍🛠🛠🛠🛠

  • @smokekim8801
    @smokekim8801 Рік тому +1

    👍👍👍👍👍

  • @JamesD1776-uc
    @JamesD1776-uc 2 роки тому +1

    Freaking awesome!

  • @OB1canblowme
    @OB1canblowme 2 роки тому

    Looks like a manual version of the tooling used in rotary transfer machines

  • @stewartfrye
    @stewartfrye 2 роки тому

    SMART ha , to spend the time to mill out that area, try a SMART bandsaw, Bandsaw is smarter

  • @aubrymacielpereirafilho3017
    @aubrymacielpereirafilho3017 Рік тому +1

    Muito bom valeu!!!.

  • @mackdaddy.7610
    @mackdaddy.7610 2 роки тому +1

    Not very precision but versatile

  • @朱敏健朱敏健
    @朱敏健朱敏健 2 роки тому +1

    再把進刀刻度完善就更好了

  • @deilsondocarmocarmo6655
    @deilsondocarmocarmo6655 Рік тому +1

    Poderia fazer uma ferramenta para fazer esfera em eixo.
    Externo e interno.

  • @neruskiy
    @neruskiy 2 роки тому +1

    Отлично👍

  • @geraldocandido6922
    @geraldocandido6922 2 роки тому +3

    Não seria mais fácil fazer em um torno?

    • @Mastermind-
      @Mastermind-  2 роки тому +1

      Olá, meu amigo
      Esta ferramenta será muito útil em algumas peças que não podem ser fixadas no torno

    • @geraldocandido6922
      @geraldocandido6922 2 роки тому

      @@Mastermind- ok Deus anençoe

  • @mohammadshafiei7505
    @mohammadshafiei7505 2 роки тому +1

    Hi engineering big techer 💐❤️❤️🙌 a few

    • @Mastermind-
      @Mastermind-  2 роки тому

      سپاسگزارم آقای شفیعی عزیز

  • @nunesmotos351
    @nunesmotos351 2 роки тому +1

    Uma usinagem super dez

    • @Mastermind-
      @Mastermind-  2 роки тому

      obrigada
      Que bom que gostou do vídeo

  • @muammeracikgoz1807
    @muammeracikgoz1807 2 роки тому +1

    Pro

  • @wiktor11593
    @wiktor11593 Рік тому +1

    Jakich obrotów używasz przy obróbce płaszczyzny
    👍👍👍👍👍👍👍👍

    • @Mastermind-
      @Mastermind-  Рік тому

      W przypadku dużych średnic mniej rund, aw przypadku małych średnic więcej rund

  • @manfiks
    @manfiks 2 роки тому

    Golf work

  • @chrisyu98
    @chrisyu98 2 роки тому +1

    when you don't have a lathe????.....

  • @johnharlow486
    @johnharlow486 2 роки тому

    Hmmmm, I’ll stick to my boring and facing head thanks but if you don’t have one I can see the appeal

  • @SquishyThing
    @SquishyThing 2 роки тому

    Why not just use a lathe!?

  • @อมรประทุมชัย

    ทำได้ครับถ้ามีแบบและตัวเลขกำกับ

  • @adriansanchez3388
    @adriansanchez3388 2 роки тому

    Con el plato de 4 mordaza del torno haces lo mismo

    • @Mastermind-
      @Mastermind-  2 роки тому

      Tal vez puedas hacer formas redondas, pero no puedes hacer hipérbolas o elipses en el torno.

  • @wrdanmorad580
    @wrdanmorad580 2 роки тому +1

    yes it is👍

  • @about2mount
    @about2mount 2 роки тому

    I hear chatter, so something is wrong.

  • @sboss7269
    @sboss7269 2 роки тому

    What is Feed RPM

    • @Mastermind-
      @Mastermind-  2 роки тому

      For each size of metal it must be changed
      Larger dimensions should have less feed and smaller dimensions should have more feed

  • @Militarycollector
    @Militarycollector 2 роки тому

    And what’s that supposed to be..???

  • @อมรประทุมชัย

    ขอแบบและขนาดหน่อยครับ

    • @Mastermind-
      @Mastermind-  2 роки тому

      ฉันไม่เข้าใจที่คุณหมายถึง เพื่อนของฉัน

  • @jadedcarton
    @jadedcarton 2 роки тому

    Yo yo

  • @rotate85
    @rotate85 2 роки тому

    Just buy a boring head.

  • @russellmitchell9438
    @russellmitchell9438 2 роки тому

    Isn't that just a less convenient boring head?

    • @Mastermind-
      @Mastermind-  2 роки тому

      Thank you for your attention

    • @russellmitchell9438
      @russellmitchell9438 2 роки тому

      @@golf398 Northwest WA, or maybe AK?

    • @russellmitchell9438
      @russellmitchell9438 2 роки тому

      @@golf398 So it goes. Good to meet you anyway. ✌️

    • @somethingelse4424
      @somethingelse4424 2 роки тому

      Well if you're just using it to bore, then it's less convenient than a designated boring tool... But it's also being used to face mill, "turn", and bore. And it apparently can face a surface twice it's width in one albeit very light and slow pass. After the apocalypse you are going to wish you had one, when you can't get inserts for the 10 specialized insert tools that you might need to do these operations. I think it's actually a pretty versatile and self-reliant system.

    • @somethingelse4424
      @somethingelse4424 2 роки тому

      @@golf398 Boring heads can turn the OD of a material on a mill? I'm asking seriously. I've not seen many tools that aren't purchased from suppliers. Also, the apocalypse thing is of course hyperbolic. I mean there is some ideal of a tool to pursue that is perfectly universal. It's a philosophical engineering perspective that might be unrealistic, but it's an interesting thought experiment. Even if it sacrifices efficiency, there might be theoretical cases where it is good to have a single tool that can accomplish every operation. This tool isn't that ideal, but it's very simple and closer to that than what I've seen so far.
      Or imagine you live someplace very remote, and have access to a Bridgeport, power, but no supply chain for tooling. Let's say a recent conflict zone, and you have access to salvaged materials. A fairly universal tool that you can make yourself and maintain yourself is maybe the only way you produce anything at all.

  • @davidbollom7189
    @davidbollom7189 2 роки тому +1

    Why when you could do the same thing on a lathe????0

    • @Mastermind-
      @Mastermind-  2 роки тому +3

      This tool will be very useful for some parts that are not clamped in the lathe.

    • @bigsmoke6189
      @bigsmoke6189 2 роки тому +1

      You sometimes need to machine projections from much larger castings that are too asymmetric or out of balance to spin up in a lathe chuck or faceplate

  • @boru-cnc
    @boru-cnc 2 роки тому

    Great tool but not very precise and that means - useless

  • @shabehalre7
    @shabehalre7 Рік тому

    .

  • @abintosd7342
    @abintosd7342 2 роки тому +1

    Just like a boring head

  • @BIGOS-CNC
    @BIGOS-CNC 2 роки тому

    ¿¿¿

  • @vladdracula7116
    @vladdracula7116 Рік тому +1

    ohne schmierung und kühlung, i kann garnet hinsehen, aber der fräser is gut .

  • @kamikaze7778
    @kamikaze7778 2 роки тому +1

    👍👍