Acabei de inscrever em teu portal. O Sr. é um excelente profissional e tem um maquinário de trabalho invejável. Parabéns. Francisco Prata desde Brasil.
Tools 2 + 3 are waaay off, I'm surprised that they don't rub. Basic stuff to have the tool face on the centerline. Do you know what the first tool is useful for?
The first tool could have the clamping screw from the top going through the holder to clamp the toolbit, keeping the bottom flat for more clearance below the toolbit. The toolbit could then be even lower in the holder as there will be no need for so much material for the thread. The toolbit should be ground half way to keep the cutting face on the centreline of the spindle. This makes the cutting edge the largest radius so less relief behind it is required making it stronger. I dont see an application for this tool, maybe that is the next video.
Need to make yourself a few file handles, especially the ones you use on the lathe. Catch a jaw with one and the tang will be in your wrist and half way up your arm before you can even think shit let alone say it.
Acabei de inscrever em teu portal. O Sr. é um excelente profissional e tem um maquinário de trabalho invejável. Parabéns. Francisco Prata desde Brasil.
Muito obrigado🙏🙏🙏
SENDING THANK YOU FROM FLORIDA IN THE USA......love all you do, Paul
Thank you and welcome!
🎉 insert end mills! Saving this one
Welcome!
Muito bom.
Love from INDIA ❤
Thank you so much friend!
Fajna frezarka. Jaki to model?
Poluję na taką małą.
30 vl Chinese
Good work❤❤❤
Thank you so much friend!
MASHA.ALLAH.GOOD.WORK
Thank you so much friend!
Seus vídeos são muito bons mesmo! Parabéns 👌👌👏👊❤️🤝🇧🇷
Thank you and welcome!
real cool
Thanks man!
👍👏
👍🤝🙏
Absolut top!
Thank you and welcome!
Nice
👏🏻👏🏻👏🏻
Exelente video ¡ pregunta . A cuantas vueltas corto el hierro redondo y de q diametro ?
Okay..... 🤔 wenn mir mal langweilig wird... Ist, kann ich mal was machen 😅
Perfeito!👍
Thank you and welcome!
parece a empresa que eu trabalho
👍👍👍
Thanks man!
How to hold square stock in a 3 jaw chuck, that's the biggest tip here.
du machst hinten vorne vieles
Welcome!
the cutting edge of the insert in tool #2 should be on the center line, right now it is waaayyy off
Welcome!
Tools 2 + 3 are waaay off, I'm surprised that they don't rub. Basic stuff to have the tool face on the centerline.
Do you know what the first tool is useful for?
थडतछं जोछ
The first tool could have the clamping screw from the top going through the holder to clamp the toolbit, keeping the bottom flat for more clearance below the toolbit. The toolbit could then be even lower in the holder as there will be no need for so much material for the thread. The toolbit should be ground half way to keep the cutting face on the centreline of the spindle. This makes the cutting edge the largest radius so less relief behind it is required making it stronger. I dont see an application for this tool, maybe that is the next video.
Need to make yourself a few file handles, especially the ones you use on the lathe. Catch a jaw with one and the tang will be in your wrist and half way up your arm before you can even think shit let alone say it.
👍👍👍