Way to go King Henry! Leading the pack! Now do a triple configuration on a common shaft with one being the drive, another supplying energy as a generator to the first motor, the third supplying either additional power or more drive and a mechanical cog or sprocket towards an array of gears or gear box.
wow its wonderful bro i'm not an electricaly capable person but i see thats one heck of a project, so much work done in it for sure and it works great 👌
Buena tarde, podrias hacer un video con información mas técnica como medidas, conexiones etc. para que las personas como yo que no tienen el conocimiento pero que son entusiastas puedan replicar, aprender e iniciarse en este maravilloso mundo de los motores de flujo axial, eres un bárbaro. que gran trabajo.
I made this version in order to see if the dual rotor concept would work and it definitely works, I didn’t size the coils or anything else, this was only an “update” video to show the progress made. This version is finished, but I still need to finish editing the video.
I made an axial flux motor but now it wont turn and I only get vibration when I try to spin it up. anyone know what could be the issue? I have mine attached to some stators that generate power.
Maybe you messed up some coil position/conection, I recommend you to check this winding scheme calculator based on number of poles and slots: bavaria-direct.co.za/scheme/calculator/
But is the whole concept of a Axial Flux Motor that you use both sides of the Magnets and Coils,means Rotor in the middle and Coils outside closed with a magnetic Path?
Epaaaaa jajjaja esp es vasco. Me gusta que hay gente jugando con estas cosas por aqui. Magnax han hecho justo lo que estas haciendo. lo digo si te sirve de ejemplo en tema de balance y centralizacion del sistem rotatorio. Los tornillos de arriba hace desbalance grave a altas revoluciones.
Stator with 6 coils evenly spaced in a circle. Rotor has 2 levels. Level 1 has 6 north facing magnets. Facing the coils. Centered on the coils. Level 2 has 6 south facing magnets. Facing the coils from the other side. When rotated to induction will become autonomous. Why. Just ask artificial intelligence
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Way to go King Henry! Leading the pack! Now do a triple configuration on a common shaft with one being the drive, another supplying energy as a generator to the first motor, the third supplying either additional power or more drive and a mechanical cog or sprocket towards an array of gears or gear box.
Ambitious project! Success was great to watch. Keep being you!
Hmm, you have 2 rings of magnet wire coils, are you going to add another plate of magnets on the other side?
Well done. Can't wait for v4
Very interesting! Beautiful work, keep it up!
👍
wow
its wonderful bro
i'm not an electricaly capable person but i see thats one heck of a project,
so much work done in it for sure and it works great 👌
Hello!
This goes better !
We need a selfrunning Maschine .
Please 🙏 bro can you make a full tutorial on DIY axial flux motor 🙏
Very nice, really good work, you should be proud of yourself.
Thank you for the video!
Good job with the motor.
Very nice!
Buena tarde, podrias hacer un video con información mas técnica como medidas, conexiones etc. para que las personas como yo que no tienen el conocimiento pero que son entusiastas puedan replicar, aprender e iniciarse en este maravilloso mundo de los motores de flujo axial, eres un bárbaro. que gran trabajo.
Mult succes , ai mult talent și inteligență 👏👏👏👍👍
Please can you tell me the horsepower it produces
You can create more torque with a dual rotor configuration. One rotor on each side of the stator will increase the length of the magnetic field.
I made this version in order to see if the dual rotor concept would work and it definitely works, I didn’t size the coils or anything else, this was only an “update” video to show the progress made. This version is finished, but I still need to finish editing the video.
Check for DKONZEN ‘s videos,he created a dual rotor motor generator; not as smooth as yours but he’s experimenting with capacitors etc
@@OverbuiltByHenryNice, we appreciate your effort, your time and the resources you invest
Why does it sound so rough? Using cornflakes for bearings?
How can we insulate magnet and rotor plate
What is starting torque and air gap between rotating magnet and stator windings ????
I made an axial flux motor but now it wont turn and I only get vibration when I try to spin it up. anyone know what could be the issue? I have mine attached to some stators that generate power.
Maybe you messed up some coil position/conection, I recommend you to check this winding scheme calculator based on number of poles and slots: bavaria-direct.co.za/scheme/calculator/
Amazing! Do you have any idea what torque can deliver?
Not yet, dyno build is in progress
Hi ...what kind of metal of the stator that you used .? It's simple mild steel or it's another iron ? Thank you so much
wow. this is only v3?
Please put protection around that motor just in case . Never forget Murphy's law
what is the Murphy's law?
@@endurofan9854Murphys Law states that Anything that can go wrong, will go wrong. #VoCoTech #NewGenerationXTv #AfroNation
Hello Henry how can we connect with you?
It works, but there is no balance. That's why it works on the table as if it were an internal combustion engine.
What is the torque
More light weight composites! A better Bell Fairwheather!
But is the whole concept of a Axial Flux Motor that you use both sides of the Magnets and Coils,means Rotor in the middle and Coils outside closed with a magnetic Path?
You can do it both ways, dual stator with rotor in the middle or dual rotor with stator in the middle.
Epaaaaa jajjaja esp es vasco.
Me gusta que hay gente jugando con estas cosas por aqui. Magnax han hecho justo lo que estas haciendo. lo digo si te sirve de ejemplo en tema de balance y centralizacion del sistem rotatorio. Los tornillos de arriba hace desbalance grave a altas revoluciones.
La parte que sobresale de arriba de los tornillos es para añadir tuercas y hacer contrapeso para equilibrar
Please can u do this for sale
I would really love to buy
Please value your safety more. That thing will grate you like a block of cheese. Where your gloves? and Secure the test material to the table .
Stator with 6 coils evenly spaced in a circle. Rotor has 2 levels. Level 1 has 6 north facing magnets. Facing the coils. Centered on the coils. Level 2 has 6 south facing magnets. Facing the coils from the other side. When rotated to induction will become autonomous. Why. Just ask artificial intelligence
Initial start was very quirky...not accepted and hence will not pass the test...🙅🏽♂️
i have make it from pvc, lol...
Is that a steel disc behind the magnets ???
Yes
that was great work
can I contact you?
I need your email