Man that left me heartbroken and sick to my stomach seeing that. I’m so sorry to the owner. I would have bought you drinks all night long and gotten you A cab ride home that night. 🍺🍺🍺🍺🥃🥃🥃🥃😢🤝
Hello, yes, I also felt like that, it was a shocking crash but the owner says he has flown it for so many years that its time to build an improved version anyway, he is able to reuse the wings and tail ! Thanks, dont worry anymore and have a Good Day !
Thank You for sharing. Wings OK, Tail OK, plane will be OK again soon. Btw.: "2:30 Voll Querruder dagegen gegeben .." (Full opposite aileron given ..) Doesn't help in "Accelerated Stall" - on the contrary, it aggravates the situation. You only have one tiny chance with rudder and "nose down"... In such a situation you can only manage it if you have trained it (a lot). Schade um das Flugzeug. I hope you are feeling better too now. (sorry, but from what I see, I don't think it was a "glitch", you had no response because of the stall. But I could be wrong, I wasn't there)
Hello, yes, I agree. We are not sure what happened but the control surfaces seem to stay neutral and the plane slowed down quickly. Anyway Gottfried is fine and already repairing the plane ! Have a Good Day !
@@rcplanedisplay ... I have a woman sitting in the transmitter who first murmurs: "Weak signal" ... then "Loss of reception" ... before the model begins the death spiral :-)
Amazing as it is, to hear that the pilot is repairing it, i believe it! I crashed a 2.5 metre sinbad copy over the summer and the wings and tail were fine. First 2/3 of the fuselage was crushed. But it flew again with a minor rebuild! 🤣 I couldn't believe it!
Well, yes, thanks, the right side engines went to idle before it happened, pilot found some loose connectors. And he almost finished the rebuild ! Happy Landings !
Schade drum, war ein tolles Modell! Tut mir leid für den Erbauer, als Modellflieger weiss ich um wieviel Stunden Arbeit und Gedanken es sich bei solch einem Eigenbau handelt.
Bei einem Strömungsabriss kann und sollte man nicht mit dem Querruder entgegen steuern. Damit unterstützt man den Abriss nur noch. Richtig wäre gewesen, Seitenruder entgegen der Abkipprichtung. In jedem Fall zu langsam geflogen. Schöner Flieger, genug zu tun für den Winter :)
Ja, stimmt aber sie hat vorher schon nicht mehr reagiert auf Steuerbefehle ! Wieder viel basteln für Gottfried aber er macht das sehr gerne und arbeitet schon an neuen Ideen für einen besseren A400 ! Fliegergruß !
What kind/MFG of radio and receiver were they using? Just got wayyy too slow, and with any bank angle the stall speed increases. The critical angle was way up there too. Sad!!
Hello, Futaba radio but cheap replica receiver ! It worked fine for many flights before ! We try to convince the owner to buy some original one ! Have a Good Day !
Yes, I know, its really an awful sound and the crash shocked me. Visited the owner and he is fine having flown the plane for many years. Now working on a new A400 already ! Have a Good Day !
Oh man wie schade so ein schönes Modell . Die Einstellung super einfach locker genommen denn leider gehört so etwas mit zum Hobby . Dennoch irgend was war komisch der Pilot (vermutlich) sagte kurz vor der harten Landung noch das irgend was nicht stimmt dann kippte sie kurz rechts weg um dann unmittelbar nach links abzutauchen mit der Nase voran , wie ein klassischer Strömungsabriss sah das nicht aus zumal sie nicht so langsam war und auch keine starke Neigung hatte bevor sie weggekippte . Zum Glück ist sie nicht noch in Flammen aufgegangen und einige Bauteile/Elemente haben den Aufschlag recht gut überstanden so das sie vermutlich wieder verwendet werden können . Wünsche dem Erbauer viel Glück beim reparieren
Guten Tag, ja stimmt, ich vermute, daß die 4 Propeller in Leerlauf gegangen sind und den Luftstrom am Flügel verwirbelt haben. Gottfried arbeitet schon guter Dinge an der Reperatur ! Fliegergruß !
I lost two Nitro airplanes, due to a stall. Most people flying, there, RC planes, or referencing the ground, for their airspeed. They think that going at the proper speed especially into a turn, but they are not thinking about their wind coming from the tail forward, technically the airspeed has dropped. Without paying attention and realizing what is happening, the plane starts to stall while approaching or into a turn, and that is the end of their aircraft. One was first brought to my attention what actually took place I couldn't imagine I said I'm still flying at the same speed but technically I was not, because of the decrease, coming from the rear of the plane. Because of the ground reference you think you're flying at the regular speed.
That‘s common knowledge and not helpful, it did not look very slow, there must be some other effects that made it critical but where not known/understood by the pilot.
It's very violent for pilot to see such crash. I've very bad feeled all my crash, it's hard. Appears at a "simple" stall but every case left a bad taste' Quick fly again is the best way
Wow, very impressive build, and great flying before the stall. Do you have any idea why the stall was so bad? Do you think the CG needs to be more forward, or that this kind of unfriendly stall is inherent in the design of this type of airplane? Anyway, best wishes in rebuild/repair!
Hello, yes, just talked to the owner and he said the motor cable connectors on the right side failed and he is improving that also during the repair ! Have a Good Day !
Toutes ces maquettes sont des pièges. Les pilotes n'ont pas encore compris ça et continuent à investir dans ces modèles. C'est le commercial qui est content !!!
Echt traurig und herzzerreißend. Als der Kollege gesagt hat "gib Gas", hat der Flieger das Gas angenommen. Ist meiner Ansicht nach zu hören. Also Verlust durch unterbrochenen Funkkontakt schließe ich aus. TipTop, dass der Wideraufbau im Gange ist. Allerdings würde ich das Profil der Flächen auf alle Fälle Überdenken.
Hallo, ja stimmt aber ich dachte, dass der Flieger vor dem Abkippen stark abgebremst hat und der Pilot sagt, dass er schon nach dem Überflug nicht mehr reagiert hat. Naja, bleibt rätselhaft. Fliegergruß !
IMO that was not a stall but more to do with the electronics inducing the stall. Keep repeating the incident where he goes into a shallow climbing left turn. The turn is initiated and almost immediately it pitches up and violently to the right. Unless this was pilot induced I rule out a stall.
Hello, well it did not respond to control inputs after the flyby and I think that the 4 props went to idle slowing it down and disturbed wing airflow also. Have a Good Day !
Hello, Futaba transmitter but replica receiver, we tell the owner to get some original receiver, I hope he gets one now since he is already working on a new A400 reusing the wings and tail ! Have a Good day !
information. this is what a servo glitch crash looks like.!!! flying along, then wham; servos go to max travel. it may be that the several motors and props were making more vibration than servos would tolerate.!!! this is why, if a model has an engine, servos MUST BE installed with screws and GROMMETS.
someone said one time no matter how big the plane you build it will always fit in the box it came in that crash was hard to look a wing will stall at high speed AOA
Von den großen mehr motorigen Nachbauten gibts viele Crash-Videos. Immer ein Jammer. Nicht selten auch mit Verbrennerantrieb/Turbine. Mir fällt da sofort ein Bericht über die Reynoldszahl ein den ich las, in dem intensiv davor gewarnt wird die manntragenden Profile zu verwenden, da sie nicht in den niedrigen Reynoldszaheln-Bereich der Modellflugzeuge funktionieren. Aber daneben gibt es sicherlich auch noch reihenweise technische Probleme soetwas adäquat mit Energie an allen Enden zu versorgen. Wie schade!
Gude, ja, es ist wohl ähnlich dem Originalprofil, ist schon viele Jahre gut geflogen damit, naja Gottfried baut eine verbesserte Version. Fliegergruß !
Ja, es wurden aber defekte Kabelstecker für die rechten Motoren gefunden, diese fielen aus und das Modell wurde zu langsam und die linken Motoren haben dann das Abkippen begünstigt. Allzeit gute Landung !
A pass at just over approach speed and then expect to climb without increasing power?! Bizarre. There was even a slight departure to the left but still no power increase. And then it really departed. Take up knitting is my advice.
;-( jeder Rc fliger müss ein absturts haben jedes jahr aber es muss nicht im früjahr sein sonst kan er er nicht ein neues fluegzeug bauen ohne das de fraue schimft ;-)
Grossière erreur de pilote le pilote l'a mis en décrochage avec une vitesse trop basse en plein virage.....!!NO...NO...NO crash inévitable Dommage il volait bien mais vitesse de vole trop rapide pas très réaliste
Evtl.doch nur ein Strömungsabriss.Die Geschwindigkeit läßt sich auf dem Video schlecht einschätzen,aber die Art des abkippens würde ich damit begründen wollen.Sorry für die Ferndiagnose. Schade schönes Modell.
The pop noise after it hit the ground was a knife to the heart. Beautiful aircraft. My sympathizes to the owner.
Yes, that sound hits hard and I also felt very sorry for the owner but he is fine and already working on the repairs ! Have a good Day !
Man that left me heartbroken and sick to my stomach seeing that. I’m so sorry to the owner. I would have bought you drinks all night long and gotten you A cab ride home that night. 🍺🍺🍺🍺🥃🥃🥃🥃😢🤝
Hello, yes, I also felt like that, it was a shocking crash but the owner says he has flown it for so many years that its time to build an improved version anyway, he is able to reuse the wings and tail ! Thanks, dont worry anymore and have a Good Day !
@@rcplanedisplay MY BELLY BUTTON DOESN'T WORK!!**
Thank You for sharing. Wings OK, Tail OK, plane will be OK again soon. Btw.: "2:30 Voll Querruder dagegen gegeben .." (Full opposite aileron given ..) Doesn't help in "Accelerated Stall" - on the contrary, it aggravates the situation. You only have one tiny chance with rudder and "nose down"... In such a situation you can only manage it if you have trained it (a lot). Schade um das Flugzeug. I hope you are feeling better too now. (sorry, but from what I see, I don't think it was a "glitch", you had no response because of the stall. But I could be wrong, I wasn't there)
Hello, yes, I agree. We are not sure what happened but the control surfaces seem to stay neutral and the plane slowed down quickly. Anyway Gottfried is fine and already repairing the plane ! Have a Good Day !
@@rcplanedisplay ... I have a woman sitting in the transmitter who first murmurs: "Weak signal" ... then "Loss of reception" ... before the model begins the death spiral :-)
Part of the fun. Crashes and burning. Thanks from St. Paul Minnesota.
Hello, Yes and trying again ! Have a Good Day !
classic stall spin
Yes, I guess maybe the 4 props went to idle and the propwash disturbed the airflow over the wings. Have a Good Day !
Amazing as it is, to hear that the pilot is repairing it, i believe it!
I crashed a 2.5 metre sinbad copy over the summer and the wings and tail were fine. First 2/3 of the fuselage was crushed. But it flew again with a minor rebuild! 🤣
I couldn't believe it!
Ja, ich weiss, Danke, der Erbauer hat sich schon wieder an die Arbeit gemacht, eine verbesserte Version zu bauen ! Fliegergruß !
Foam foam foam!!
Bummer BRO ✌️😎🤟🏼
Low speed turn 😞 damn stall will get you every time
Yes, true and maybe the 4 props went to idle disturbing the airflow over the wings. Have a Good Day !
Ne pas voler à proximité d'une ligne HT ni d'un pylone radio. Vieille expérience.
Bonjour, oui, thats a good advice !
A beautiful plane, great flying. Sorry to that happen. Peace
Yes, thanks, bad crash but owner is ok working on an improved version ! Have a Good Day !
Nice stall 👍
Well, yes, thanks, the right side engines went to idle before it happened, pilot found some loose connectors. And he almost finished the rebuild ! Happy Landings !
It's So disheartening, Rebuild it, Awesome sound,
Hello, yes, already new front in the making ! Have a Good Day !
i think you stalled bud Maby a little more power next time
Yes, power dropped and it slowed down fast ! Happy Landings !
@@rcplanedisplay sorry bud must be heart braking
Schade drum, war ein tolles Modell! Tut mir leid für den Erbauer, als Modellflieger weiss ich um wieviel Stunden Arbeit und Gedanken es sich bei solch einem Eigenbau handelt.
Bei einem Strömungsabriss kann und sollte man nicht mit dem Querruder entgegen steuern. Damit unterstützt man den Abriss nur noch. Richtig wäre gewesen, Seitenruder entgegen der Abkipprichtung. In jedem Fall zu langsam geflogen. Schöner Flieger, genug zu tun für den Winter :)
Ja, stimmt aber sie hat vorher schon nicht mehr reagiert auf Steuerbefehle ! Wieder viel basteln für Gottfried aber er macht das sehr gerne und arbeitet schon an neuen Ideen für einen besseren A400 ! Fliegergruß !
What kind/MFG of radio and receiver were they using? Just got wayyy too slow, and with any bank angle the stall speed increases. The critical angle was way up there too. Sad!!
Hello, Futaba radio but cheap replica receiver ! It worked fine for many flights before ! We try to convince the owner to buy some original one ! Have a Good Day !
Beautiful machine, big loss to break such a model ... 😔
Yes, true but repairs are already in progress ! Have a Good Day !
Sorry to see that happen 😢 it’s the worst feeling is seeing your pride and joy careen into the ground
Yes, thats true but I was surprised how well the owner got over it and startet rebuilding right away ! Its already half repaired ! Have a Good Day !
The sound it made when it hit. heartbreaking
Yes, I know, its really an awful sound and the crash shocked me. Visited the owner and he is fine having flown the plane for many years. Now working on a new A400 already ! Have a Good Day !
Das positive: Durch die anscheinend leichte Bauweise und den großen Luftwiderstand erscheinen Flächen und Heck weitgehend intakt.
Ja, stimmt, diese Teile werden auch wieder verwendet beim neuen A400, der bereits in Arbeit ist ! Fliegergruß !
Typicly stall - FULL AILERONS - yeah, selfmade crash ^^ - All rudders neutral - throttle up - fly again ^^
There were some technical issues like low power right side found some faulty connectors. Happy Landings !
Oh man wie schade so ein schönes Modell .
Die Einstellung super einfach locker genommen denn leider gehört so etwas mit zum Hobby .
Dennoch irgend was war komisch der Pilot (vermutlich) sagte kurz vor der harten Landung noch das irgend was nicht stimmt dann kippte sie kurz rechts weg um dann unmittelbar nach links abzutauchen mit der Nase voran , wie ein klassischer Strömungsabriss sah das nicht aus zumal sie nicht so langsam war und auch keine starke Neigung hatte bevor sie weggekippte .
Zum Glück ist sie nicht noch in Flammen aufgegangen und einige Bauteile/Elemente haben den Aufschlag recht gut überstanden so das sie vermutlich wieder verwendet werden können .
Wünsche dem Erbauer viel Glück beim reparieren
Guten Tag, ja stimmt, ich vermute, daß die 4 Propeller in Leerlauf gegangen sind und den Luftstrom am Flügel verwirbelt haben. Gottfried arbeitet schon guter Dinge an der Reperatur ! Fliegergruß !
I lost two Nitro airplanes, due to a stall. Most people flying, there, RC planes, or referencing the ground, for their airspeed. They think that going at the proper speed especially into a turn, but they are not thinking about their wind coming from the tail forward, technically the airspeed has dropped. Without paying attention and realizing what is happening, the plane starts to stall while approaching or into a turn, and that is the end of their aircraft. One was first brought to my attention what actually took place I couldn't imagine I said I'm still flying at the same speed but technically I was not, because of the decrease, coming from the rear of the plane. Because of the ground reference you think you're flying at the regular speed.
Yes, all pilots can learn from this ! But in this case the plane did not respond anymore to control inputs ! Have a Good Day !
Once the aircraft is in the air ground speed is totally irrelevant .
Простое сваливание на крыло. Этим и я болею. Скорость нужна! Самолет не авто😊притормаживать запрещено!!! 😊✈️
Yes, not having enough Airspeed is critical ! Have a Good Day !
That‘s common knowledge and not helpful, it did not look very slow, there must be some other effects that made it critical but where not known/understood by the pilot.
Looked like it was controlled into that dive but not by you. The signal may have took a hit.
Well, either that or a right side power loss slowed it below stall speed. He found faulty connectors ! Happy Landings !
It's very violent for pilot to see such crash. I've very bad feeled all my crash, it's hard.
Appears at a "simple" stall but every case left a bad taste'
Quick fly again is the best way
Yes, its tough but thanks and Happy Landings !
Очень жаль. Красивая была модель.
Yes, thats true ! Repair already in progress ! Have a Good Day !
Wow, very impressive build, and great flying before the stall. Do you have any idea why the stall was so bad? Do you think the CG needs to be more forward, or that this kind of unfriendly stall is inherent in the design of this type of airplane? Anyway, best wishes in rebuild/repair!
Hello, yes, my theory is that all engines went to idle and the propwash disrupted airflow over most of the wing. Have a Good Day !
No, you need to dial in some differential on your ailerons. Only the aileron on the inside of the turn should move.
@@deltamangr6247 that makes zero sense….
@@deltamangr6247 so your saying only one aileron should move
I'm saying that the outside aileron should move just a bit. Combined with exponential, it transforms our planes.
another bigfatcargo plane bites the dust.
Ouch, with the motors stopping like that it lost airspeed quick. I'm guessing it went into a 0% throttle failsafe? Shame as the model looked great.
Hello, this is also my theory, anyway have a Good Day !
@@rcplanedisplay Isn't failsafe wonderful.
Sehr schade um den schönen Flieger. 😢
Gude, ja stimmt aber Gottfried ist guter Dinge und baut eine verbesserte Version ! Schönen Tag noch !
Puuh, thats heartbreaking to see this beauty crashing. Hope they could figure out what went wrong, to prevent such a tragedy in the future.
Hello, yes, just talked to the owner and he said the motor cable connectors on the right side failed and he is improving that also during the repair ! Have a Good Day !
Oh man, watching that crash made me wanna puke. I am so sorry for the pilot's loss.
Yes, its really a bad crash but dont worry, the owner is already working on a new one reusing the tail and wings ! Have a Good Day !
Ganz klar strömungsabriss. Man sah schon beim Start das sie zu wenig Leistung hat. Gruss peter
Looks like it lost signal, what a shame, so nice of a plane.
No. Too slow. Stalled.
Hello, well, the pilot reported a signal loss but it also slowed down quickly before the stall. Have a Good Day !
Schade so schone Flugzrug
aw mate shame great looking model
Yes but a new one is already in the works reusing the tail and wings ! Have a Good Day !
Sehr schade! Tolles Modell!🙁
Ja, stimmt aber Gottfried hat den neuen Rumpf schon fast fertig gebaut ! Holm und Rippenbruch !
Toutes ces maquettes sont des pièges. Les pilotes n'ont pas encore compris ça et continuent à investir dans ces modèles. C'est le commercial qui est content !!!
So sorry beautiful plane did she stall get back in air soon
Hello, John, thanks but dont worry, owner is working an improved version ! Have a Good Day !
Looks like it lost power. A bad battery connector or poor soldering job perhaps? Sad to see. It looked and flew great..
Yes, right on, thats what the owner discovered, poor contact on old worn connectors ! Happy Landings !
MOJO your way flyer friend. Maybe had some radio freq. issues.
Hello, yes, maybe the replica receiver or voltage power supply who knows. Have a Good Day !
Una lástima de verdad, se sabe qué ocurrió?...un fallo de batería no parece....
Echt traurig und herzzerreißend. Als der Kollege gesagt hat "gib Gas", hat der Flieger das Gas angenommen. Ist meiner Ansicht nach zu hören. Also Verlust durch unterbrochenen Funkkontakt schließe ich aus. TipTop, dass der Wideraufbau im Gange ist. Allerdings würde ich das Profil der Flächen auf alle Fälle Überdenken.
Hallo, ja stimmt aber ich dachte, dass der Flieger vor dem Abkippen stark abgebremst hat und der Pilot sagt, dass er schon nach dem Überflug nicht mehr reagiert hat. Naja, bleibt rätselhaft. Fliegergruß !
IMO that was not a stall but more to do with the electronics inducing the stall. Keep repeating the incident where he goes into a shallow climbing left turn. The turn is initiated and almost immediately it pitches up and violently to the right. Unless this was pilot induced I rule out a stall.
Hello, well it did not respond to control inputs after the flyby and I think that the 4 props went to idle slowing it down and disturbed wing airflow also. Have a Good Day !
Tip Stall??
Yes, it slowed down due to Power loss and stalled ! Have a Good Day !
Décrochage...vitesse de vol trop petite...pas assez d'eau sous la quille...pour le stabiliser crach inévitable 😓
What kind of radio gear were you using? So sorry for your loss!!!
Hello, Futaba transmitter but replica receiver, we tell the owner to get some original receiver, I hope he gets one now since he is already working on a new A400 reusing the wings and tail ! Have a Good day !
@@rcplanedisplay $25.00 receiver in a model like that is just mind blowing to me. Some have to learn the hard way though!!
information. this is what a servo glitch crash looks like.!!! flying along, then wham; servos go to max travel. it may be that the several motors and props were making more vibration than servos would tolerate.!!!
this is why, if a model has an engine, servos MUST BE installed with screws and GROMMETS.
She stalled dude, air speed far too slow on the turn!
Hello, well something caused her to slow down quickly ! Have a Good Day !
im guessing a failed esc caused the loss of BEC and a failure in the aileron servos
Someone actually talking sense .
Sounds like the motors came to low power setting and then it stalled. Maybe went into fail safe. 😢😢😢
Yes, thats what I think, too ! Dont worry and have a Good Day !
Décrochage profond angle d'incidence annule l'efficacité des enpenages en T. Hélas trop près du sol pour rattraper dommage. Falco
Ein herrliches Modell, sehr schade 😥
Genau aus diesem Grund bin ich bei Modellschiffen hängengeblieben.
Ja, Schiffe sind auch sehr schön !
someone said one time no matter how big the plane you build it will always fit in the box it came in that crash was hard to look a wing will stall at high speed AOA
Yes, the owner told me that the cable connectors on the right side failed shutting down the engines. Well, have a Good Day !
What is the data of this model ?
Hello, it has 3,8 meters wingspan and weighs around 24 kg, a new fuselage is almost finished ! Have a Good day !
@@rcplanedisplay hooo so giant, it's so sadv(the crash) noooo i can't believe it.
Von den großen mehr motorigen Nachbauten gibts viele Crash-Videos. Immer ein Jammer. Nicht selten auch mit Verbrennerantrieb/Turbine. Mir fällt da sofort ein Bericht über die Reynoldszahl ein den ich las, in dem intensiv davor gewarnt wird die manntragenden Profile zu verwenden, da sie nicht in den niedrigen Reynoldszaheln-Bereich der Modellflugzeuge funktionieren. Aber daneben gibt es sicherlich auch noch reihenweise technische Probleme soetwas adäquat mit Energie an allen Enden zu versorgen. Wie schade!
Gude, ja, es ist wohl ähnlich dem Originalprofil, ist schon viele Jahre gut geflogen damit, naja Gottfried baut eine verbesserte Version. Fliegergruß !
Tip stall
😢
Hello, yes, too bad but the owner is almost finished with the repairs ! Have a Good Day !
I disliked your vid as it was such a shame.......I do hope one day you'll build another one just as beautiful 😭
Yes, I agree but dont worry, a new and improved version is already being build reusing the wings and tail ! Have a Good Day !
@@rcplanedisplay Awsum you Man....back on the horse 😎
Sehr schade um das Modell!
Klassischer Strömungsabriss.
Ja, es wurden aber defekte Kabelstecker für die rechten Motoren gefunden, diese fielen aus und das Modell wurde zu langsam und die linken Motoren haben dann das Abkippen begünstigt. Allzeit gute Landung !
Che peccato, mi spiace molto !
clear stoll! Your fault!
Hello, well, yes but the pilot is very experienced and said he was not able to control it anymore to avoid the stall. Have a Good Day !
A pass at just over approach speed and then expect to climb without increasing power?! Bizarre. There was even a slight departure to the left but still no power increase. And then it really departed. Take up knitting is my advice.
@@dynevor6327 I'm sure you do. But I'm not one of them so wind your neck in if you don't make a living from flying.
@@dynevor6327 Aeromodellers keep crashing because they don't understand why they crash.
@@dynevor6327 Whatever.
@@dynevor6327 Yes, I edited them myself so as not insult your intelligence.
@@dynevor6327 Coming from someone who can't even explain there reasoning.
Schade um das Modell 😢
Ja, stimmt, finde ich auch aber habe vom Erbauer gehört, daß die Verkabelung nicht gut war, eine verbesserte Version ist in Arbeit ! Fliegergruß !
'
maybe out of fuel or 4 wrong propellers spins same time
Hello, maybe power loss and the propwash disturbed the airflow over the wings. Have a Good Day !
@@rcplanedisplay
hi R R D....
'
next time best thing to do is put parachute on the R/C airplane if fail fly...
be smart wise
@@bestamerica Yes, good idea but low altitude makes a parachute ineffective. Have a Good Day !
Engine failure?? Any survivors??😅
Hello, yes, sudden power and control loss and airspeed decrease below stall speed. Everyone is ok ! Have a Good Day !
@@rcplanedisplay beautiful aircraft. Classy operator builder
@@michaeloneil2379 Yes, old school homemade model building project ! Repairs already in progress! Have a Good Day !
@@rcplanedisplay good news!! I wish you a lot of courage to repair it 😗
Es tut mir leid. 👀
Hallo, ja, Danke, es ist schlimm aber der Besitzer ist ok und baut eine verbesserte, neue A400 ! Schönen Tag noch !
;-( jeder Rc fliger müss ein absturts haben jedes jahr aber es muss nicht im früjahr sein sonst kan er er nicht ein neues fluegzeug bauen ohne das de fraue schimft ;-)
Gude, ja, dieser Flieger flog vorher schon viele Jahre ! Schönen Tag noch !
Grossière erreur de pilote le pilote l'a mis en décrochage avec une vitesse trop basse en plein virage.....!!NO...NO...NO crash inévitable
Dommage il volait bien mais vitesse de vole trop rapide pas très réaliste
Tip Stall I suspect. Too bad.
Yes, got slow but its repaired and flying again ! Have a Good Day !
I think he have Lost power on one or two engines.
Hello, yes, just talked to the owner and thats what he thinks too found faulty connectors ! Have a Good Day !
@@rcplanedisplay possible or a Bad pack...
😥
😳...schade
Ja, aber eine neue A400 ist in Arbeit ! Schönen Tag noch !
stall.....
Yes and right side power loss before that ! Happy Landings !
Do not like to see this kind of a plain in a crash
Hello, yes me neither, such a nice homebuilt plane ! But a new version is already in the works ! Have a Good Day !
electric?? not good
Hello, not sure what was wrong but I guess mabe electrics. Have a Good Day !
So sad
Yes, Rob but dont worry, visited the owner and he is ok having flown the plane for many years, now building a new one ! Have a Good Day !
Classic pilot error a stall, trying to be to clever , bin liner at the ready
Too bad
Oh, yes, but he is already sheeting the new fuse ! Happy Landings !
Scheisse!
Wirklich schade!
Ja das stimmt aber kann passieren und Gottfried ist ok und baut schon eine neu A400 auf ! Fliegergruß !
@@rcplanedisplay Geil! Weiter so!
🤣🤣🤣 rest in pieces 😂😂😂
Its back flying ! Have a Good Day !
Evtl.doch nur ein Strömungsabriss.Die Geschwindigkeit läßt sich auf dem Video schlecht einschätzen,aber die Art des abkippens würde ich damit begründen wollen.Sorry für die Ferndiagnose. Schade schönes Modell.
Hallo, ja schon ok, das Modell fliegt wieder ! Siehe 60 Jahre FMC Video, schönen Tag noch !
Hey a large amount of 5 minute epoxy and it will be back in the air shortly
Hello, yes, I have seen pictures of it in the workshop with the middle section already new built. Have a Good Day !
I'll buff out.
Well, not this time but a new fuselage is almost finished ! Have a Good Day !
@@rcplanedisplay Know what happened?