Well shit.. got most of the dust bunnys out. Wanted to replace the thermal paste, but those mobo case screws are just too damn tight, or glued. Near stripped one.. gave up. They just won't budge. Damn..
so port and the plug that connects the fan were like totally stuck together and with barely any pressure came off. So I guess I'm fucked cuz idk how to reattach it. probably have to solder it
Hello there,can you tell me which PS3 Slim model is that console and how many GB does she have,and which is the best PS3 Slim model,i mean the one that has the biggest cooling fan?Thanks
Just out of curiosity which model slim is this? Reason i ask is I’ve seen some other tear down videos where the BR drive ribbon is underneath and tricky to get to
Yep really like this guide, all these years later it's the same machine. I was using another guide and the antennas and power socket didn't need to be removed (fair enough) otherwise very comprehensive, especially like the heatsink disassembly which I wanted to do to get excess old thermal paste out of the cracks.
At 4:06 when I tried to remove the eject/power button cable, the white plastic connecting piece it is attached to came of with it. It doesn't appear that the pins have been damaged. I can put the white connector back on the motherboard, but it is loose and could fall off easily. Was this glued on? I'm wondering how to correctly reattach it.
Bit old but for the curious apparently it was really common especially in the fat ps3 I've heard they like the heat and since roaches like stamp glue maybe they like the glue in there too
I accidently broke that node or something connector that's on the motherboard where the black wire plugs in to . And now the controllers have such delayed responses to the point it wont work at a far distance, like 2 or 3 feet; unless it is very close to the console. The controller works perfectly fine when plugged, but I need to able to fix this. Am I fucked or could I solder that tiny component back to the mother board?
I recently did this to my PS3 Slim 120gb model. I don't understand, no matter how many videos I find my disc drive and fan are different. Not only does my Disc Drive have a extra cable on the bottom but my fan is also just one piece. It definitely doesn't come off the way yours does. Makes it hard to figure out which shell replacement to buy since I want to switch mine in to a white shell.
Warning to anyone opening up this model! I’m not sure if it’s just my console but separating the top plastic was super difficult for some reason. The bottom of the front plastic where you insert the disc didn’t want to come up from the rest, so pulling the top off cracked it
@@alessandromalagoli1337 now I have ps3 superslim so nope but I have idea: maybe just heat with hairdryer or heatgun. Superslim was easier do teradown but also it have really weak plastic
Hello, my PS3 Slim has a bizarre problem..... when i turn it on, it stays silence for more than 30 seconds (no fan, no hdd checking etc...) just the green light, and then after those seconds the system will boot normally. it also has audio glitches, i can't boot to Safe Mode and cant play PS2 Classics (blackscreen), what is the issue ?
@@kmieciu4ever Maybe you are right, after some search i noticed this issue causes that symptoms to other people. i usually play in a old CRT TV and i recently tried to connect a HDMI TV and the image dosen't appear, so yeah it's probrably the HDMI IC chip
3001B model of the slim is the better build. It has a better disc drive and power supply unite plus it's laid out a little better inside and cables are routed better.
I've got the 3001A and there were so many stupid design flaws like the disc drive had a ribbon cable that attached below where the disc drive sat so I had to use 2 tweezers and a jig to lift it slightly and it took about 50 tries
Use a can of duster to insure no damage of moister will come to the electrical compartment inside of the ps3. I did it to my ps3 I got from a pawn shop. She was a dirty girl.
I have a question I have a 3001a model PS3 slim that is broken. Powers on shuts off immediately. I swapped power supply for known good one and it still turns on and shuts off. I also have another PS3 2000 model I believe, can I use the AV socket from that to test it on my 3000 model for further testing? I don’t wanna open the motherboard just yet until I get some thermal paste. Thanks
Pay attention kiddies, THIS is how you do a tear down and assembly video! Well done!
👌👌👌👌👌👍👍👍👍
That's right
REALLY well done! Thanks for this professional video. Lets just hope my ps3 works now :)
its works?
@@MayitoChannel No. Dead.
@@dtesta shit :(
My case are crack, are the 3000 series is compatible with 25xx or 21xx?
trying to refurbish one right now there are 2 roaches and i am deathly afraid of insects
I found 6 or 7 in mine, disgusting, had to literally stomach my distaste and fear of being near them.
whose wifi and bt antennas ran underneath the Blu-ray ✋
1 year ago I came here to re paste my ps3 slim, success now re watching this is really nostalgic.
Nice :P
Do you have PS3 Super Slim Teardown & Assembly?
No but I will write it down so I can make a video about it :)
10:18 rip dudes who have the ribbon cable in the middle
Bro I took my whole drive apart and ducked it up. Damm it. Now I gotta replace it.
An awesome very detailed & thorough
video as per usual, my dude! 😁👍👍
Cheers to you, my man! 🥃🥃
Yayyyyyy I broke my fan ;))))))
Hitmarker sweet! So did I partner!!!
Captain Blubby 😂😂. He pulled it out so easily but it took me a lil bit and I think I pulled a lil to hard 😂 all good because I have a ps4
Stupid ass
@@at-cj2iy facts
can you do a video for the ps3 super slim version please?
Well shit.. got most of the dust bunnys out. Wanted to replace the thermal paste, but those mobo case screws are just too damn tight, or glued. Near stripped one.. gave up. They just won't budge. Damn..
so port and the plug that connects the fan were like totally stuck together and with barely any pressure came off. So I guess I'm fucked cuz idk how to reattach it. probably have to solder it
Hello there,can you tell me which PS3 Slim model is that console and how many GB does she have,and which is the best PS3 Slim model,i mean the one that has the biggest cooling fan?Thanks
Those power supply screws are sooo tight, I can't get them out :(
Same lol I give up
@@kmax7521 yeah...
Actually I got them out an continued but later down I found an even tighter screw right in the motherboard. It was the last one im so pissed :'(
@@ramyabouhassan if you can't take it out try with drill take the head and it should open
I got them eventually. Took forever lol
Just out of curiosity which model slim is this? Reason i ask is I’ve seen some other tear down videos where the BR drive ribbon is underneath and tricky to get to
Thanks for the excellent detailed instructions.
what screwdriver did you use to remove the motherboard backplate ? i mean the screws around the heatsink plate not the 4 in the center.
I cant get them off either. What screw driver is needed ? Seems to be different
Thank you very much! This is the best tutorial for model 2004b. 👍
Yep really like this guide, all these years later it's the same machine. I was using another guide and the antennas and power socket didn't need to be removed (fair enough) otherwise very comprehensive, especially like the heatsink disassembly which I wanted to do to get excess old thermal paste out of the cracks.
They dont build them like they used to LOL
ahhh 2000 series with the infamous necs
There are several connecters that this video has missed.. #avoid
At 4:06 when I tried to remove the eject/power button cable, the white plastic connecting piece it is attached to came of with it. It doesn't appear that the pins have been damaged. I can put the white connector back on the motherboard, but it is loose and could fall off easily. Was this glued on? I'm wondering how to correctly reattach it.
Same happened... I carefully put the plastic part in... Then thr cable.. Works fine... 👍👌👌
How do you clean dust that's on the motherboard?
Isopropyl alcohol
hi what are capacitor specs used in sata signal ?
Hi brother, I have the same high temperature device, is the reason the heat paste?
Yes. Or too much dust
Gud music choice. 😊
Annoying music aside, this was a good help. Thanks!
planning to do this. is it hard?
after quiting PS3 It Will Go to trash because i cant even reuse in my normal PC
Well atleast the hdd
Ty tecnology
i got a ps3 full off dead Roaches and tons of roach poo,i cleaned it and its working like new
Gabo Cejitas how does one get roaches inside a ps3?
Bit old but for the curious apparently it was really common especially in the fat ps3 I've heard they like the heat and since roaches like stamp glue maybe they like the glue in there too
You should probably mention that the antennas were not in the vid on how to remove them .
How do I shot web?
PS3 slim mother board have any CMOS battery.(my PS3 slim asks for time&date set for every switch on.
10:16 thanks for that, i was putting the panel in before the odd
I accidently broke that node or something connector that's on the motherboard where the black wire plugs in to . And now the controllers have such delayed responses to the point it wont work at a far distance, like 2 or 3 feet; unless it is very close to the console. The controller works perfectly fine when plugged, but I need to able to fix this. Am I fucked or could I solder that tiny component back to the mother board?
I recently did this to my PS3 Slim 120gb model. I don't understand, no matter how many videos I find my disc drive and fan are different. Not only does my Disc Drive have a extra cable on the bottom but my fan is also just one piece. It definitely doesn't come off the way yours does. Makes it hard to figure out which shell replacement to buy since I want to switch mine in to a white shell.
what is the exact movement what should I do to remove and reconnect the wi-fi and Bluetooth antennas?
this is a tuto how to make a good video thanks
You know under the big IHS is a laptop size chip with thermal paste under as well you need to delid to repaste properly
Thanks friend, greetings from 2021!😁
could you guys make skins and show how to fix certain parts such as the analog sticks
We have skins for the ps vita slim on our website, do you need the phat model as well?
I have 3 screws left :)
Reback InTime thats ok, more efficient system now 😂
@@devinloveridge2164 somehow it still works ,and for a better airflow you can just remove the top cover ,i didn't but you can if you want .
Weight reduction
Warning to anyone opening up this model! I’m not sure if it’s just my console but separating the top plastic was super difficult for some reason. The bottom of the front plastic where you insert the disc didn’t want to come up from the rest, so pulling the top off cracked it
Nevermind, I’m just retarded. Follow the video directions closely unlike me lol. 4 Torx screws, not 3. Yikes
RyandBurtson i thought it was only 3 torx screws mines doing the same thing
@@OnlineSagittarius. some models have only 3, some others have 4
I need clean that fan of ps3 thanks bro
music vibes reminds me of mechanic simulator, but yes it suitable indeed.
Is this cech 2004b ? ( Mine is this one it will be the same with yours ? )
Yes, I can confirm, it is CECH 200.x model. I have 2004b, all components are same as in video.
@@vejmi25 thank you very much dude i am considering to open it but i am scared if i do something wrong by mistake
@@vejmi25 because i want to clean it is very loud like a helicopter so ... what you suggest to me
@@trancegotten3699 clean it up, change the thermal paste and you could replace the fan with a more powerful one too
ΗΙ where can I find 2 ODD cable for ps3?
Which model is this ?
2:22 and this screws holding too good.
same in my case, did you solve it somehow?
@@alessandromalagoli1337 now I have ps3 superslim so nope but I have idea: maybe just heat with hairdryer or heatgun. Superslim was easier do teradown but also it have really weak plastic
@@altairps3HFW I just saw that both screws are stripped, so it's going to be tough... : /
will ps3 slim screws work with a ps3 super slim?
Little tip a spudger or even a thin guitar pick is better for the case screw covers as it won't mar the plastic if it slips
Hello, my PS3 Slim has a bizarre problem..... when i turn it on, it stays silence for more than 30 seconds (no fan, no hdd checking etc...) just the green light, and then after those seconds the system will boot normally. it also has audio glitches, i can't boot to Safe Mode and cant play PS2 Classics (blackscreen), what is the issue ?
I bet it was the HDMI IC chip.
@@kmieciu4ever Maybe you are right, after some search i noticed this issue causes that symptoms to other people. i usually play in a old CRT TV and i recently tried to connect a HDMI TV and the image dosen't appear, so yeah it's probrably the HDMI IC chip
Thank you my friend for this video it worked !!
Nice video 👍
Great Video, helped a lot!
Can u fix rlod
Good Dissasembly video!
Thank you..i love this video😍
3001B model of the slim is the better build. It has a better disc drive and power supply unite plus it's laid out a little better inside and cables are routed better.
I've got the 3001A and there were so many stupid design flaws like the disc drive had a ribbon cable that attached below where the disc drive sat so I had to use 2 tweezers and a jig to lift it slightly and it took about 50 tries
not for me you cant install cfw on it :D
Thank you so much!
Can you do the super slim
Amazing music... 😊😊😊
Thank you, really easy to understand and clean video
Good Good Good
I HAVE ONE QEASTION
IF WE WILL OPEN PS3 AND CLEAN
ITS GOOD TO DO OR NO IF WE OPEN PS3 SLIM THERE WILL HE ANY PROBLEM OR NO
Use a can of duster to insure no damage of moister will come to the electrical compartment inside of the ps3. I did it to my ps3 I got from a pawn shop. She was a dirty girl.
If you are not carefull there will probably go something wrong but if you are carefull nothing should actually happen but always take your time
no i have the slim model
Bravo 👍👍👍
Thanks..
NICE and CLEAN !
That heat sink... awesome lol
Look much better than the ps4 slim heat sink
could you do something on the ps vita
Sure we can we have them laying around, what do you want to see exactly.
I have a question I have a 3001a model PS3 slim that is broken. Powers on shuts off immediately. I swapped power supply for known good one and it still turns on and shuts off. I also have another PS3 2000 model I believe, can I use the AV socket from that to test it on my 3000 model for further testing? I don’t wanna open the motherboard just yet until I get some thermal paste. Thanks
Is it some sort of natural law that gaming console tutorial vids must have shitty rave music? Has not one of you considered Jazz or Classical?
Website still not up?
Probably somewere tomorrow, check back in about 24 hours.
Back online.
Just out of curiosity, if you don’t mind my asking may we see a tear down & reassembly of a Super Slim PS3 at some point in the foreseeable future? 🪛🎮
There super easy to tear down way easier than the slim