How to Build Truck Drawers with a SLIDE-OUT BED!
Вставка
- Опубліковано 17 чер 2024
- follow us as we built our truck systems, with drawers rated for 500 pounds each! and a fully functioning bed slide. the best part... everything is super smooth!
the slides: www.amazon.com/heavy-duty-dra...
TIME CARDS!
00:00 INTRO
01:00 THE PLAN
01:32 Making the Base
04:25 Making the Sides
06:44 Making the BED SLIDE
11:04 Making the DRAWERS
16:30 Overview - Розваги
Amazing job. All great. The thing that up-ticked my heart. The ‘Lincoln Electric’ sticker. ‘41 or ‘42 my father worked for LE as a Welder. LE wrote a deferment letter for my Dad WWII - said he was essential. He was essential - he was so upset that they did that without his knowledge. He quit - he wanted to enlist, he did, Navy Fighter Pilot. He survived - so did the LE story.
Man, I’ve been really wanting to do one of these and so far this has been the nicest one that I’ve seen because of the top slide really built into it. You really need to put everything that you used in the description because I wanna make it exactly like yours.
I love it. Great job y’all!
Love it keep skills growing. I'm a 47 yr old finish carpenter and love to see younger men doing men work.. at 47 still pick up trick. Hats off to you gentlemen
Wow, great job guys.
I am a finish carpenter also cabinet builder (mostly finish now ? Pays more) . I am going to do that but I did build out an SUV back full of cabinets and a bed on top for a customer. The way I do those drawers is install your slides as u did! Then place your drawer about half in extend the slides out (slip a long 4’ shim under the drawer to keep it up off the bed from dragging maybe a 1/2”) then screw your extended slide to the drawer ! Bam! You did it 1st try in 30 min!
Great job. Pro level all the way.
iv been designing my truck bed for awhile so far this is the best. ill most likely use smaller wheels and do two layers of ply on the slide out but thanks for the help ill be sharing this vid as much as I can
Sick setup very well designed. Love that the slide runs flush to the tailgate, great design feature. Might have to build something similar I also need something as versatile!!
Maaan I’ve been researching the best design/ technique for these and you guys nailed it man!!
Perfect design! Love these types of videos too
Thanks Owen! We have more coming!
Sweet set up fellas, be safe
Very good job!
We want a separate video of the secret tools now bro 😂. Nice setup
As soon as the tool is officially released I’ll do an in depth review!
I've seen a lot of rollout drawer videos, and fellas, you've nailed it. Really Nice Job !!
From the views I see, you must be around Castle Rock. I built many homes on and around Diamond Ridge many years ago.
Keep it up!
Nice work guys
I took a bunch of MDMA, blasted your video soundtrack in my single-wide trailer, and just danced.. I just frickin danced..
What the heck
Nice work!
Nice job guys!
Solid video! Would love to hear how they’re holding up and if there’s anything you would change/do differently! Thanks!
Nice work guys!
I like this build out. I might copy it only make a second set of drawers to be able to swap with camping gear instantly.
GREAT JOB
Great job
Thanks!
Great job gentleman
Nice job guys
Nice job
Hey viewers, help Jerod out by hitting the thumbs up button. At the time I watched it so had 191 other people had watched it but only 31 gave it a thumbs up.
Nicely executed! FYI you'll want to periodically lubricate the latching mechanism on the drawer slides, I use garage door lube. Hope that helps!
Great job guys
Good good job.
Looks awesome! I'd consider cutting out large center areas, so it's like a skeletal ribbed framework , thatll reduce the weight a ton but still be plenty strong and rigid
Keep it going
You two did a nice job on the storage units. I must say that is one of the best designs I have seen. I want to make a set-up for my 2014 GMC van. I have shelves but at 66 years old climbing in and out to use them doesn't happen often enough, so everything ends up in a heap on the floor.
Check out my older video on the van setup! We had it pretty nice
Come on now buddy I am 64 still work as a carpenter full time and jump, kneel, squat, and wear full bags (finish man) all day! I feel better now than I did at 50! Just loose weight , eat light and no cigarettes or booze! Don’t sell us “more mature “ guys short? Ohhhhh and Church on Sundays! Very very important!
@@zephyr1408 I'm not putting older workers down, I am the one with the health issues. Besides really bad arthritis in my knees and a torn something in my left knee, I do pretty well. When I am doing interior finish, I too work a good long day. I don't smoke nor am I overweight, 6' tall and 150 pounds, I don't drink either. I also eat fairly well with the diet my GI doctor has me on. COPD, chronic pancreatitis and severely blocked carotid arteries in my neck are what slows me down. I hope after my artery cleaning and knee repairs this winter I'll be doing better.
I have a friend who has been building custom houses on his own for 30 years. He is 64 and has 8 carpenters who all, but one is over 60. His 2024 calendar is full. He just started telling people that he is not booking work for 2025, yet.
I was doing great until I hit 65 then everything went to Hell.
@@royordway9157 check out the carnivore diet. Really look into it.
If I missed something, I would make the drawers so they lock with a key incase someone tries to break in at least your tools in the drawer will be saved and much harder to get to. Great work!
Sick!
A fine mustache and very fine video my friend!
I learn from the best!
In both staches and videos
Fucking awesome bruh! I like your style! Framers, no doubt and no apologies. I grew up framing with my dad and moved toward furniture making and curved stairs and I hope my drawers come out as good as yours. Real nice job and smart design.
We need a1 year review on how you’ve liked the drawers!
Great job gentlemen ! How are they working out now that you have had a chance to use them awhile ?
Hey, just wanted to say; you guys did awesome work, on sliding truck bed and drawers. I am gonna start soon building my own sliding truck bed with drawers, on 3500 gmc sierra 2006. I am gonna try to build yours system. Any details tips you would like to share, will be greatly appreciate. Thanks
i'm on a RCB binge right now
Hope you enjoy!!
Absolutely great work. I am curious about the way the angle iron worked out on your canopy clamps? It was hard to see in the final product shots. I'm going to do this build in the next few weeks and was wondering about any advice concerning keeping the rolling bed aligned and or not being able to just pull completely out.
It worked good for holding it down, the platform didn’t stay aligned perfectly always. Sometimes I’d have to push one side in a little bit, but it was never a hard process, and I never installed anything to keep it from sliding out, but the weight of it as it came to the end would pinch it against the angle iron and keep it in pretty well
that is awesome, I did something similar in the back seat of my 3/4 ton ford. How come you didn't take the topper off while working?? Just wondering, sick design, might copy that one day
I like your over all plan and it looks to be coming out well. You probably should have added a piece of thin plywood between your rollers and the box for the drawers. just to keep dust etc out of your drawers. One other thought Have you given any thought to the weight? I assume your trucks are 1/2 to which only gives you 1000 lbs. 3/4 plywood can weigh from 42 lbs up to 60 lbs. you could easily have half of your payload capacity before you put any of your gear in the trucks. Hopefully I haven't been too negative, yous have done a great job and I thoroughly enjoyed the video. I subscribed!!!
We haven’t noticed any issues with weight so far! I’ve even carried a steel beam in the back of it. I did upgrade to a slightly bigger truck and moved the drawers over though
Really good but there is one thing you didn’t touch on
The top big draw, how dose that lock when pulled out
Cheers
Did the customer ever figure out where all his plywood went? It's nice when you can get your boys to help with your drawers?
We bought our own material 👍
What are the sizes of the wood you used, and I love you guys made this and showed it to everyone!!!! No gate keeping around here.
Please let me know I’m a beginner !
1/2” for the bottom, and double 1/2” for the top! Everything else is 3/4
If you were to construct them all over again, is there anything that you guys would do differently? I find myself wanting to know more about the way that the slide stops, since I didnt see much of anything showcased with that part of the build, or its final product. I think you briefly mentioned how it keeps from tilting up. Speaking of the slide, how do you keep it tracking straight in and out? Is the fixed casters all thats needed for that? No alignment mechanisms or channels for that at all? Any idea on its weight capacity, espesh fully extended? I havent seen much, if any, designs that address the sagging factor during heavy loads, unless they were just welded tray frames or similar. Look forward to your response, if you got some time. Thanks for sharing, regardless. Aloha
i probably wouldnt do the sliding bed on my next one. the capacity is determined by the drawer slides themselves, they say 500 pounds supposedly.
i didnt incorporate anything to keep it from sliding out. it has enough weight on it to pinch and not fall out, but either way its nice to be able to take it out if i need to. i didnt incorporate any tracking for it, but i should have! can get slightly misaligned and makes you have to put it in just right to keep it square
Nice work! Two things I missed.. how are you attaching the sidewalls for the drawers? And how does the slide just not come flying out? Thanks
Hi! The slide right now is just held in with friction, honestly if I have a scenario where it becomes an issue I’ll add a latch of some sort to lock if i need, also the sides are held in with screws at an angle into the base
@@Coffmanconstruction makes sense. Thanks for the reply
I watched it again and saw the brackets used for the side panels.
👍👍
yo bro will u do a tool video on the tools you have. thanks🤙
You bet!
@@Coffmanconstruction your the man!
This came out amazing! But I’m so curious what the secret tools are now….. lmao also what state is this? Looks beautiful.
Let’s just say they’re red 🤫
How’d these hold up? I was going to make some drawers with the same slides you used here.
How are the drawer slides holding up? Would you suggest doubling the slides? 2 sets per drawer, or is the single 500lb set enough?
If you have both drawers slid out How is the back not tipping up? Did you screw the bottom plate into the bed somehow?
How many plywood did you purchase to make the whole project done
I have a removable bed liner in my ram 1500. Think I can leave it in or should I remove it to build this?
I’m lazy and would probably leave it in hahah
What are your little nail plates called. Gussets
Wassup bro I’m also a framer in Colorado. Mostly SUMMIT County and PARK County but I’ll go anywhere pretty much. Can you give me the link to those bed slides please? Thanks! FRAME ON!!!
Is there any other thing that I can use instead of that wheel for the top slide
Can you build a list of all materials used??
5 sheets of 1/2” sanded plywood,
4 sheets of 3/4 sanded plywood,
2 sets of heavy duty 60” drawer slides
21 smooth rolling casters (about 2-1/2 inches tall)
2 pull handles, heavy duty
2 3’ pieces of angle iron 2”
1 16’ 2x6
1” screws
1-5/8” screws
Where you use the 2x6 in your video?
Link on caster wheels. Or what size are they
I'm 70 years old, and I need your drawer system installed on my truck along with the top slide.what would you charge to make me one???
How did you attach the sides of the drawers to the base?
If u google 60” drawer slides, you will see several options of the same ones. GL
What’s the purple foam?
it is advantech subfloor adhesive! it rocks
😂😂😂🎉 I have a 2006 Chevy Silverado with a 6.5 bed.What would you charge me for making me a setup???😅😅😅🎉
"sawzaw" blades.
Si quieres que vean tus vídeos no grabes con la cámara en mano porque marea 😵
He meant Stolen tools, not Secret tools
So MANY ADS!!! 👎🏼👎🏼👎🏼
Nice build but I can't seem to understand how someone in the trades won't need space to hall a miter or table saw especially with a gravity stand attached. Plus Im rarely parked close enough to the work at hand to store handheld tools in the truck. I have a garage storage tote that weighs atleast 60kg with all my cordless dewalt tools that I walk on the jobsite with.
lose the shit music bro