How to Replace Rear Shock Absorbers 2013-2016 Dodge Dart

Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ia/1ASHA00433
This video shows you how to install new rear shock absorbers from TRQ on your 2013-2016 Dodge Dart. Shock absorbers help your vehicle stay stable and safe. Signs of worn out shocks are knocking or bumping noises, loose handling, or a bouncy or bumpy ride. The typical service life of a shock absorber is 50,000 miles, depending on conditions. TRQ shocks and struts are engineered to fit your vehicle perfectly.
This repair was done on a 2014 Dodge Dart GT 2.4L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2013 Dodge Dart
2014 Dodge Dart
2015 Dodge Dart
2016 Dodge Dart
Tools you will need:
• 10mm Socket 1aau.to/obuG/1AXAA00017
• 16mm Socket 1aau.to/obRi/1AXAA00015
• 17mm Socket 1aau.to/obRi/1AXAA00015
• 19mm Socket 1aau.to/oavx/1AXAA00043
• 8mm Socket 1aau.to/obuG/1AXAA00017
• Trim Tool Set 1aau.to/oaoa/1AXXX00006
• Locking Pliers 1aau.to/onw/1AXAA00139
• E18 Inverted Torx Socket
• E4 Inverted Torx Socket
• Torque Wrench 1aau.to/oaXx/1AXAA00044
• Gloves 1aau.to/oaGg/1AXSS00048
• Safety Glasses
• Floor Jack 1aau.to/oamN/1AXAA00068
• Jack Stands 1aau.to/o9E/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jameskennedy4910]

How different is a 2012?

[@gamehacker100]

My locking pliers won't grip the shaft.