How to Replace Rear Shock Absorbers 05-14 Chrysler 300
Вставка
- Опубліковано 21 сер 2024
- Buy Now!
New Shock Absorber from 1AAuto.com 1aau.to/ib/1ASH...
1A Auto shows you how to repair, install , fix, change or replace your front shocks with their loaded struts. This video is applicable to the 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15 Chrysler 300
🔧 List of tools used:
• 15mm Wrench 1aau.to/og9/1AX...
• 16mm Wrench
• 17mm Wrench 1aau.to/og9/1AX...
• 18mm Wrench
• 15mm Socket 1aau.to/oDd/1AX...
• 21mm Socket 1aau.to/oiI/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ofe/1AX...
• Ratchet 1aau.to/oKy/1AX...
• Socket Extensions 1aau.to/oDd/1AX...
• Torque Wrench 1aau.to/okU/1AX...
• Gloves 1aau.to/obF/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/ojr/1AX...
• Jack Stands 1aau.to/ojq/1AX...
For More Info visit us at 1aau.to/h/akw/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You guys make the best vids
So I followed these instructions exactly, and 15 minutes into my first drive, the struts fired up through the shock mount. The struts pushed the rubber shock mount bushing clean through the steel housing. That wider steel washer you tossed away? Yeah, it's supposed to go between the strut and the shock mount. I'm furious. If I lived in the US, I'd be contacting a lawyer. I sincerely hope that other people see my comment and don't make the mistake of taking these videos seriously.
Question after doing so is it necessary to get a wheel alignment?
We need a video on the removal of the rear lower control arm that the shock was bolted too.
+Todd Sanders We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Excellent
On many other videos they use a second jack to lift up the spring, is it necessary?
do you have a video on how to replace the rear spring
+mrcarman07 We currently do not have an auto repair video on this particular repair. Thank you for asking. 1aauto.com
did you ever find one dude im doing one now on a 07 charger
look up speedys garage on UA-cam and he has really detailed videos on how to do all the suspension on his challenger but it's the exact same for 300s and chargers
Jared Flowers
I did everything you guys did and my shock will NOT compress. I've tried everything and it won't compress. What can I do?
You need to use a ratchet strap to compress it
Do you guys have any videos on rear toe link replacement for this same vehicle?
+cheche roman We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
@@1AAuto hopefully you guys can create one for the rear suspension replacement of this vehicle!
Im about to work on my rear toe as well. Looking forward to videos
Put some air in that dang tire too!
+IcarusTech Thanks for the tip!
I replaced the rear shocks and it makes a noise do I have to take them off and prime them so the noise can stop?
+@A1_Libra We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Would this be the same for a 2014 charger pursuit AWD V8
How to change the mount on a 300 2012
+D Andrew We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
What is the piece on the bottom of the shock and spring called?
I need to know that my wheels are leaning in
I wonder why won't they answer your question?
+juan lopez That would be the lower control arm. 1aauto.com
Will these work on a touring 2010 Chrysler 300?
I'm doing coilovers on the rear... Awd magnum..
Can you do a video, or tell me here, how I can do the rear springs (with coilovers)....?
+RESTLESS FEATURES We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Thanks for the reply. And I'll be looking forward to it...
Please do add verbal info for people adding coilovers to the rear... The front is exactly the same process so no need to show/tell
I can share that video around. And plenty of views will hit.
Stock is always needed but that extra info for them coilovers would be super helpful.
Would this work with a 2016 Chrysler 300c awd?
Hello guys I need help! I just been told from the mechanics that my car use a self leveling shock absorbers with part Nr. 681431AB. I check and they cost a lot! Can i use some other parts who cost less or without self leveling?
My car is a chrysler 300 3.6 awd 2013 luxury edition
I bought these for my 06 charger but the bottom part of the shock moves left and right. Did I get the wrong ones?
+N3KO_o The shock shouldn't have any movement in it. If it is moving and the base where the bolt goes through, the bolt may not be tightened enough. If this doesn't resolve the issue that you are experiencing, please call our customer service staff at 888-844-3393 and we can take a look at your order for you. We are here to help you out, and strive for 100% total customer satisfaction.
Best Regards,
1A Auto
Thank you for the vid.. but be honest! That wasn’t the 2006 Chrysler 300 in the beginning of the video lol
It has a 300C front end swapped on.
You said 53 foot pounds what does that means and how do you determine that by sight
+Jonathan Ramos The bottom shock bolt requires 53 FT LBS of torque. Hope this helps you out. 1aauto.com
I've replaced rear shock mount 2 times and bushing keeps coming out of the metal mount. Anyone know why this might be happening?
Aftermarket parts just do that some times or possibly over tightened.
Cause you don’t know what you’re doing
hell i need big help around these shock absorbers! i searche verywhere and i cannot find the Sachs replasmemt and everyone ask me the vin nummmber. but my car is in Europe and the vin is not the same like in Usa! it is very simple. whats the difference between RWD and AWD chrysler 300 year 2013. 3.6 penta star. why? i think all the REAR shock absorber are the same. mine is luxury edition without self leveling. now i dont know what to buy for ma car! everyone say different. which part is for my car correct??? Mine is AWD fit this maybe will change front because is AWD but rear what difference does it make?
+Zivko Manev The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
What if not loot buddy
U coulda just went in the trunk and unscrewed it
Wrong.
*Caution
This video only suitable for normal rear shock ab. Nivomet type shocks need a strap.
+JM Lee Thanks for the feedback!
I just replaced my nivomats on my 2012 dodge charger enforcer with bilstein 24-216951 the go for $180 each in 🇨🇦 new nivomats were $800 each 😢make sure to get a ratchet strap to replace them because they are impossible to remove without one the new bilsteins are awesome😊
I don't have acomment
+D Andrew Thanks for the tip!