Hi there, thank you for your question! Try hard reset your laptop by holding down the power button for 10-15 seconds this can sometimes resolve the issue. If that doesn't work make sure all the connections between the monitor and the computer are fine by trying a different monitor and trying an different port. If none of those work I'd recommend taking it to a professional for further assistance.
@@RecoveritDataRecoverySoftware oh my god, you're a lifesaver, i have a school project to do for tomorrow and I couldn't fix this issue, but this worked, thanks!
Hmmmmmmmmmmmmmmmmmm well i bought an acer aspire laptop last year from new and 3 weeks ago i got the usuual message " windows update needed " so i let it update as usual, after updating i went to bed. next morning i turned on laptop, updates info popped up and i let it do its thing then the screen went black...................... tried many keys to rectify it but no luck. The screen is bark blue / black. I can turn off laptop then on again. log in with my screen code then it goes black / dark blue............ Nothing works. any ideas ??????????
Hi there, thank you for your question! I would recommend plugging a USB drive into a different device with bootable windows installed and see if you can launch back into windows to further troubleshoot the issue. If not I would recommend taking it to a professional for further assistance.
Hi there, thank you for your question. If you're dealing with a black screen on your MacBook Pro and are unable to see anything, using hotkeys and accessing settings directly may be challenging. However, you can try a few steps to troubleshoot the issue: Use an External Monitor: Connect your MacBook Pro to an external monitor. This will help you determine if the issue is related to the built-in display or if it's a broader system problem. Reset NVRAM/PRAM and SMC: Although you can't see the screen, you can still perform a reset of the NVRAM/PRAM and SMC. Follow the steps outlined in my previous response, as these key combinations don't rely on visual feedback. Boot into Safe Mode: Even though you can't see the screen, you can attempt to boot into Safe Mode by holding the Shift key during startup. Safe Mode disables certain system extensions and might allow your MacBook to boot successfully.
Hi there, thank you for your question! You can try opening it up by pressing Windows Key + R to open the Run dialog box then type "devmgmt.msc", that should open up device manager.
In my case its already black screen with cursor before login like after i factory resetted it was just stuck on just a moment after configuring the region then after the just a moment it went black
Hi there, thank you for your question! The black screen with a cursor means that Windows on your PC has become so corrupted that none of the OS is even “seen” by the BIOS code. The HP logo is contained in the firmware inside the BIOS chip on the motherboard. So that would display even if there were no drive in the PC. The expert suggests that you will need to do a factory reset to reinstall Windows from scratch and will lose everything on the drive in the process. If you have any important files on your laptop, you might want to try booting your laptop from a USB drive and backing up your files before proceeding with the factory reset.
@@ItzBigBrainMy comment got deleted by youpoop because it contains the truth, also you're having problems with uxtheme.dll, which is a primary component of Window's system, and you likely installed a uxtheme patcher because of the error roblox gives, thinking that installing it would fix your problem. Now youre stuck here with the same problem as I am. Am I correct?
Hi there, thank you for your question! If you do not have any important data you can factory reset your pc this will clear all the files and the computer will only have the essentials it had when u initially got the pc just remember to back up all your data beforehand to make sure you don't lose anything.
It worked. Now do I have to do this every time I cut my pc on smh. And you’re showing options for my screen. I can’t see the screen for any options to work
@@RecoveritDataRecoverySoftware so my you got disabled, randomly and I lost all admin access to every important file I need to help me. I don’t understand how because I’m the only user on this PC. My PC is not registering my GPU. It keep telling me I don’t have permissions to do anything. I can’t even factory reset
Hi there, thank you for your question! Can you explain to me a bit more about the issue you're having did it happen after you installed anything is the issue still the black screen after login?
Hi there, thank you for your question! IF you tried all the other steps in the video I would recommend trying a system restore if that doesn't work there might be a physical issue with the computer and you will need to take it to a professional for further assistance.
Laptop installed an update on it's own while i started it up. I can't even go to login screen. F2 during boot also results in black screen. F12 also resolves in black screen. Guess i'll take it to a pro😂
Hi there, thank you for your question! Windows Explorer is built into your Windows machine so when you open Task Manager if you click on the process and type "w" eventually Windows Explorer will show lower down in the Task Manager and then you should be able to restart it.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
How you expect to do this with black screen??
Hi there, thank you for your question! Try hard reset your laptop by holding down the power button for 10-15 seconds this can sometimes resolve the issue. If that doesn't work make sure all the connections between the monitor and the computer are fine by trying a different monitor and trying an different port. If none of those work I'd recommend taking it to a professional for further assistance.
so trueeee
@@RecoveritDataRecoverySoftware oh my god, you're a lifesaver, i have a school project to do for tomorrow and I couldn't fix this issue, but this worked, thanks!
@@jorjaantony1047that part
When I uninstall the graphics drivers do I click the “attempt to remove the driver for this device” box as well?
Hi there, thank you for your question! Yes you should select the box.
heyy thank you very much!!! i almost give up in this situation but your tutorial helped me
Hmmmmmmmmmmmmmmmmmm well i bought an acer aspire laptop last year from new and 3 weeks ago i got the usuual message " windows update needed " so i let it update as usual, after updating i went to bed. next morning i turned on laptop, updates info popped up and i let it do its thing then the screen went black...................... tried many keys to rectify it but no luck. The screen is bark blue / black. I can turn off laptop then on again. log in with my screen code then it goes black / dark blue............ Nothing works. any ideas ??????????
Hi there, thank you for your question! I would recommend plugging a USB drive into a different device with bootable windows installed and see if you can launch back into windows to further troubleshoot the issue. If not I would recommend taking it to a professional for further assistance.
waste of time.
How can you use hot keys and see settings if you have the black screen?
Hi there, thank you for your question. If you're dealing with a black screen on your MacBook Pro and are unable to see anything, using hotkeys and accessing settings directly may be challenging. However, you can try a few steps to troubleshoot the issue:
Use an External Monitor:
Connect your MacBook Pro to an external monitor. This will help you determine if the issue is related to the built-in display or if it's a broader system problem.
Reset NVRAM/PRAM and SMC:
Although you can't see the screen, you can still perform a reset of the NVRAM/PRAM and SMC. Follow the steps outlined in my previous response, as these key combinations don't rely on visual feedback.
Boot into Safe Mode:
Even though you can't see the screen, you can attempt to boot into Safe Mode by holding the Shift key during startup. Safe Mode disables certain system extensions and might allow your MacBook to boot successfully.
The tuck are you on about a MacBook Pro for a Windows question?
Windows key + X will not open my device manager
Hi there, thank you for your question! You can try opening it up by pressing Windows Key + R to open the Run dialog box then type "devmgmt.msc", that should open up device manager.
In my case its already black screen with cursor before login like after i factory resetted it was just stuck on just a moment after configuring the region then after the just a moment it went black
Also its an hp laptop
Hi there, thank you for your question! The black screen with a cursor means that Windows on your PC has become so corrupted that none of the OS is even “seen” by the BIOS code. The HP logo is contained in the firmware inside the BIOS chip on the motherboard. So that would display even if there were no drive in the PC. The expert suggests that you will need to do a factory reset to reinstall Windows from scratch and will lose everything on the drive in the process. If you have any important files on your laptop, you might want to try booting your laptop from a USB drive and backing up your files before proceeding with the factory reset.
@@RecoveritDataRecoverySoftwareso does that mean i need to do another factory reset? i just did it yesterday and then the problem appeared
@@RecoveritDataRecoverySoftware also i already backed up my files in google drive beforehand so i can do a full drive clean reset
@@ItzBigBrainMy comment got deleted by youpoop because it contains the truth, also you're having problems with uxtheme.dll, which is a primary component of Window's system, and you likely installed a uxtheme patcher because of the error roblox gives, thinking that installing it would fix your problem. Now youre stuck here with the same problem as I am. Am I correct?
How can i reset my pc to just like when i purchased it..and all settings are just like 1st time I used it.
Hi there, thank you for your question! If you do not have any important data you can factory reset your pc this will clear all the files and the computer will only have the essentials it had when u initially got the pc just remember to back up all your data beforehand to make sure you don't lose anything.
No data needed I just want my pc as new i bought
No essential data was there
Please provide me solution
Want to make my default administration setting
It worked. Now do I have to do this every time I cut my pc on smh. And you’re showing options for my screen. I can’t see the screen for any options to work
Hi there, thank you for your question! Can you provide me with some more information on your issue and I'll be happy to assist you.
@@RecoveritDataRecoverySoftware so my you got disabled, randomly and I lost all admin access to every important file I need to help me. I don’t understand how because I’m the only user on this PC. My PC is not registering my GPU. It keep telling me I don’t have permissions to do anything. I can’t even factory reset
Thanks . Very good video. Uninstallation works for me
Thank you it worked
None of these worked but I can open task manager and when I press win+X it does not work at all
There also is no way for me to open the windows search bar
Hi there, thank you for your question! Can you explain to me a bit more about the issue you're having did it happen after you installed anything is the issue still the black screen after login?
@@RecoveritDataRecoverySoftware yes it happend after a update and it’s only black screen after I login
I did the right click on windows explorer solution and windows explorer disappeared from the list! Still have a black screen!
Hi there, thank you for your question! IF you tried all the other steps in the video I would recommend trying a system restore if that doesn't work there might be a physical issue with the computer and you will need to take it to a professional for further assistance.
@@RecoveritDataRecoverySoftware I don’t know what happened but I fixed it somehow! Thank you!
It still works
Laptop installed an update on it's own while i started it up. I can't even go to login screen.
F2 during boot also results in black screen.
F12 also resolves in black screen.
Guess i'll take it to a pro😂
Restart worked out for me
Still not working
Hi there,
Could you please elaborate on your question? We're glad to help.
Thanks
u es all videos are fake the only way to fix it is to delete all drivers and profiles then reset this pc
I don’t have windows explorer
Hi there, thank you for your question! Windows Explorer is built into your Windows machine so when you open Task Manager if you click on the process and type "w" eventually Windows Explorer will show lower down in the Task Manager and then you should be able to restart it.
Simple get rid of wimdows, Windows 11 is a pile of crap.
Try to change your wallpaper it worked for me.😊
Yeah the screen is black a.k.a. I cannot do any of the things you recommended.
Amazingly useless video.
O my god thank you your so helpful 😊 ⭐️⭐️⭐️⭐️⭐️