Wow! Nice looking boat for a 1990. I just had mine scanned for the Nauteva brand, but I really like the way that yours turned out. After seeing yours, I'm going to have my gunnels scanned along with a-lot of other areas.
Patrick, this is an awesome video! The texture on the floor pads is called 'embossed' and the texture everywhere else is called 'brushed'. I think you really proved that if you take care of this material it will last a lifetime.
great point about the floor texture. my buddy has his boat covered in stuff like whats on your gunwale and it absolutely sucks to clean. also, light grey was probably not the best color choice for him.
O.k…..o.k… you want to keep your seadek looking brand spanking new. Go to the hardware store and buy a small tarp to cover the bow when you fish. Lock it into your front bow hatch and anchor hatch. When you stop fishing hose it down and store it. Case closed🤙
Great video. Dark grey is smart. If you use any light color and fish a lot YOU WILL STAIN THE SEADECK ! SEADECK stains easily no matter how maticulous you are cleaning it. I wish there was a better material.
Horrible trash company. I had Seadek on my new boat. After a year it started to peel up. I contacted SeaDek and they said it was installed incorrectly. It was installed on a new boat at the manufacturer. They refused to do anything....trash product.
No when you order it from the company you can order it in different thicknesses and every 3mm is usually 1 layer so you can pick a different color for every layer.
@@darielnavarro2151 stuff is not cheap, I would use it on an older hull to spruce it up, but not worth it on a newer hull. Youll eventually start dealing with peeling and cracking imo... Salt water and heat, it's just inevitable imo
I cannot believe this boat is 90's. It looks like 2020
Wow! Nice looking boat for a 1990. I just had mine scanned for the Nauteva brand, but I really like the way that yours turned out. After seeing yours, I'm going to have my gunnels scanned along with a-lot of other areas.
Excellent video and greetings from New York. This has really motivated me to do this on my Searay.
Patrick, this is an awesome video! The texture on the floor pads is called 'embossed' and the texture everywhere else is called 'brushed'. I think you really proved that if you take care of this material it will last a lifetime.
Thanks for sharing!
9 months is hardly a lifetime.
@@biglaverstyle 9 mos of hardcore fishing can tear a lot of things up, especially in salt water
@@mabelpup8502 i say again, 9 MONTHS IS HARDLY A LIFETIME. Read it again... there you go.
@@biglaverstyle Shaddap!
great point about the floor texture. my buddy has his boat covered in stuff like whats on your gunwale and it absolutely sucks to clean. also, light grey was probably not the best color choice for him.
I wish I knew where the hell to get all of the stainless latches, turn lock latches, etc for a boat from the 90’s, late 90’s, and early 00’s.
West coast marine, maybe?
Beautifully done
i have a 1982 mako how much did the build cost was curious ballpark please
O.k…..o.k… you want to keep your seadek looking brand spanking new.
Go to the hardware store and buy a small tarp to cover the bow when
you fish. Lock it into your front bow hatch and anchor hatch. When you
stop fishing hose it down and store it. Case closed🤙
Great video. Dark grey is smart. If you use any light color
and fish a lot YOU WILL STAIN THE SEADECK ! SEADECK stains easily
no matter how maticulous you are cleaning it. I wish there was a better
material.
Update on it now
Brother you have a Fly Set up... N I C E !!!!!!!!!!!!!!!!!!!!!
Great Looking Boat !! Can I ask you what color you used on your boat and what color Sea Dek color did you use ?
top notch job on the refit of that Mako!!
appreciate it!
How is it now that is over 3-1/2 years
Was this mako on project dreamboat?
How much did it cost?
How can i seal the sea deck? 303
VRP
How is it holding up these days?
Horrible trash company. I had Seadek on my new boat. After a year it started to peel up. I contacted SeaDek and they said it was installed incorrectly. It was installed on a new boat at the manufacturer. They refused to do anything....trash product.
Did you build it up on your seat by layering 3 different sheets together? I didnt know they would stick together? nice boat
No when you order it from the company you can order it in different thicknesses and every 3mm is usually 1 layer so you can pick a different color for every layer.
Love the boat man it came out awesome! Might do the sea dek on my 254, if i ever finish it !
Go for it!
actual cost at the time would be helpfull
What was the cost?
Sea Dek is expensive. Probably $5k or more
Looks nice! How much weigh does it add to the boat?
Can't imagine much?
Quick question my man, is the dark sea deck hot on the feet ?
It gets warm but never like terrible hot
What's the colour of your boat called
Dark Grey AwlCraft
Super nice but man is it really worth the price ? That job is atleast a couple thousand dollars
This job cost him atleast 4K. My buddy did one like this for just the floor and his boat is way smaller. That cost him 1,800 so this is atleast 4k
@@Murfdigidy yea for my 21 tarpon bay the whole boat they were asking 3K like that’s crazy to me
@@darielnavarro2151 stuff is not cheap, I would use it on an older hull to spruce it up, but not worth it on a newer hull. Youll eventually start dealing with peeling and cracking imo... Salt water and heat, it's just inevitable imo
I was quoted 2.5k for a 17 ft bass tracker
How much did your sea deck cost.
For a boat this size with this amount of product is about $48,000.
@@biglaverstyle Jesus!
Looks bad ass
Does it carpet burn the girls knees???
Only the chin 😂
Can I have your boat it’s such a beautyyyy 🔥
What boat do you owe that a bad ass rig
Don't pressure wash all the time and it'll last a lot longer
9 months isn’t a useful review. You have folks asking for an update 1-3 years now.
South Florida boat center redid this 👌 boats a 1989
All that seadek cost more money then your boat is worth 🤣