My vsc off is flashing and the chk engine light is on.. is that a big problem? Truck runs fine and has lots of power but it does drive like it's in 2gear sometimes
Sorry sir not sure what that means. Try disconnecting the battery for about a minute and connect back that might reset the truck. Maybe if you go to a parts store and see if they will scan your truck and see if any codes come up.
I had the same thing happen to my tundra too got it scanned said torque converter stuck off and replace solenoids but truck runs fine. Dealer said replace tranny lol
Not really sure It probably says in the manual I think every 4 or 5000 miles. I change my oil ever 4000 miles so my light comes on at different time than my oil change.
@@DIYJIM just got mine from a dealership with a fresh oil change. They must of not reset light. It flashed off and on for a couple days then finally stayed on permanently until I turned off thanks to ur video
Honestly, I watch this video every few thousand miles. Haha. Thanks for it!
I made the video and I do the same thing LOL
I do the same thing too😋
I do the same thing too😋
Just watched it, again. 😎
I also watched the video again 👍 thanks
Thank you very much. It's the easiest one video explanation 😊. I am like it. And I am a woman following your instructions and doing it 😊
glad I could help, thanks for watching
GRACIAS AMIGO MIRE TRES VIDEOS DE HISPANOS Y NO ENTENDÍ MIRE TU VIDEO EN INGLÉS Y RAPIDO RESOLVI EL PROBLEMA DE LA LUZ
Tan contenta de poder ayudarte
Thank you you explained it better then everyone else 👍🏽
Welcome
I check this video every time I change oil thanks!
I think I do also LOL because I never remember
Very good video easy and simple thank you.
Your welcome, thanks for watching
Great video, just watched it to reset mine. Thank you.
You're welcome! Thanks for watching
Great vid, I’ll be back to do this again in a few months
I used to watch my own video because I also would forget. LOL
Had to come back and watch it again after it came back on haha thanks man
No problem 👍
Thanks for your help friend, your video helped me a lot.
welcome
Thanks man worked the first time
Awesome, thanks for watching
Thanks for taking the time to record this.
welcome thanks for watching
Did help me right away, thanks so much. Really grateful
Glad it helped!
Thank you. Very helpful information
You are welcome!
Worked like a charm
Thanks for watching Billie
Thanks for the help man! Great video!
No problem! Thanks for watching
Thank you for the video I got it done yes, thank you very much.
Thanks for watching
Thank you, you save my money!!
Welcome thanks for watching
Wish I could like this video every time I use it. You would definitely have a few more likes from just me. 😅
Well thanks for leaving another comment that helps my videos. Thank you very much
Thank you sir really appreciate your help.
You are most welcome
Thank you man for the information
No problem 👍
Thank you for sharing this video. It's help out alot.
Your welcome glad I could help
Thank you, Jim. Much appreciated!
Very welcome
Thank you..was very helpful
You're welcome!
Perfect! Thank you thank you thank you.
You're very welcome!
Thanks for that short and sweet explanation.
No problem, thanks for the watching
Thanks man! Sure did help me out
No problem 👍
Thx so much...made life a bit easier...lol
Your welcome
Thanks man keep making vids like this these little things help hella 👌👌👌
Welcome thanks for watching
Thanks for showing that 👍
Welcome
Muchas gracias por tu tutorial
Welcome
Nice video! Worked great 👍
Glad it helped, thanks for leaving a nice comment
Thanks for the help sir.
Always welcome
Awesome it worked! Thanks bud!
Welcome thanks for watching
Thanks for helping
No problem
Thank you! You video was very helpful!
Welcome thanks for leaving a comment
Nice and easy !! Thank you
Your welcome
Awesome thank you 👍🏼👍🏼
You bet!
Thank you so much, my friend.
Only with you did I learn how to do it.
God bless you!!
Your welcome thanks for leaving a comment
Tank you more help me
My vsc off is flashing and the chk engine light is on.. is that a big problem? Truck runs fine and has lots of power but it does drive like it's in 2gear sometimes
Sorry sir not sure what that means. Try disconnecting the battery for about a minute and connect back that might reset the truck. Maybe if you go to a parts store and see if they will scan your truck and see if any codes come up.
I had the same thing happen to my tundra too got it scanned said torque converter stuck off and replace solenoids but truck runs fine. Dealer said replace tranny lol
Thanks for the info 👍
Welcome
A work for me thank you very much
You're welcome!
I just Did it thank man
👍
Welcome thanks for watching
Awesome thank you
No problem!
It works om matrix 2012 thanks 👍
Your welcome
Thank you for this video 💪 works
Glad it helped
Thank you. It worked 💪
Glad to help
Simple and to the point very good god bless you thanks 😊
Welcome
Very helpful thanks
Welcome
Muchas gracias amigo
Your welcome thanks for watching
Me ayudo mucho thanks
Glad I could help
Thanks!
Your welcome
Thank you sir.
Welcome thanks for watching
Thank You!
Welcome
Omg thank for the help
Welcome
Will this 0 out trip a also. I use trip a for fuel and trip b for oil life
Sorry I do not remember and my light is not on right now for me to check
Thank you😊
You're welcome
Great. Thanks
Welcome thanks for watching
Thanks will do nice job on the video
Welcome
Nice thanks
Your welcome
Thanks sir
Your welcome thanks for commenting
Thank you.
You're welcome!
Thanks a lot Mr
Welcome, thanks for watching
Mr. Bad ass thanks
You are very welcome
Thank you
Welcome
Good stuff
Thanks
gracias amigo
Your welcome
Good 2 go!
Thank
Thanks again. Lol 2nd time here
I also watch my own video to give myself a reminder. LOL thanks for watching again
Nice..
Thanks
Thankyou
Welcome
Works on 2012 too.
Awesome glad I could help
Thanks bro
Your welcome
Hi do you know how much oil needs? Please thanks.
6.6 I think it’s in my oil change video if you want to check.
Thanks man
Your welcome
Bumber no center shift console. Is that a sr5 with a 5.7
I have the 4.7
Thanks man lol
Your welcome
Help me a lot !!!!!
Glad I helped you
he good jop
Thanks for watching
How often is this maint req light preset to turn on?
Not really sure It probably says in the manual I think every 4 or 5000 miles. I change my oil ever 4000 miles so my light comes on at different time than my oil change.
@@DIYJIM just got mine from a dealership with a fresh oil change. They must of not reset light. It flashed off and on for a couple days then finally stayed on permanently until I turned off thanks to ur video
🤙🏽👊🏽
thanks for watching
👍☝🏼
thanks for watching
Looks like you need to trip your TPS also.
My TSP sensors went bad. Thanks for watching
Your tire is probably not low but sensor is broken like mine
You are correct 15 year old truck, thanks for watching
Chingon guero
Thanks for watching
sequoia is ODO, otherwise same
Thanks for watching
Doesn't work on 2007 tundra
It works on my 2007, sorry it didn’t work for you
Why these guys gotta talk, just show and done
Thanks for watching
Thank you!
Welcome
Thank you so much
Your welcome
Thanks 👍
Welcome 👍
Thank you
You're welcome
Thanks
Welcome
Thank you
Welcome
Thank you
Welcome thanks for watching
Thanks
Welcome