I try P&S Bead Maker paint protectant for the first time!
Вставка
- Опубліковано 15 вер 2024
- I try P&S BEAD MAKER paint protectant for the first time! #GAMECHANGER. While I was visiting The Rag Company headquarters a few months ago, I was able to test a spray-on paint sealant from P&S called Bead Maker. I blew my mind! You'll see why in this video!
✅ Click here to buy on Amazon: amzn.to/2WestEE
⬇️🔶 LINKS TO QUALITY DETAILING PRODUCTS & TOOLS ⬇️⬇️
🇺🇸 For people in USA:
Bead Maker special (1 gallon + 1 pint + 1 Eagle Edgeless microfiber towel): www.amazon.com...
Bead Maker (1 pint): amzn.to/2WestEE
Bead Maker (1 quart): amzn.to/2MjVzhq
Bead Maker (1 gallon): amzn.to/2MdjSgK
The Rag Company Creature Edgeless microfiber towels: amzn.to/2y6yhpo
The Rag Company Eagle Edgeless 350 microfiber towels: amzn.to/2ymYpvl
The Rag Company Eagle Edgeless 500 microfiber towels: amzn.to/2EsPvml
The Rag Company Twisted Loop drying towels: amzn.to/2pZfrM9
The Rag Company Edgeless 365 towel: amzn.to/2TpUHuP
iK Multi 1.5 pump sprayer: amzn.to/2pDhzJk
🇨🇦 For people in Canada:
Bead Maker (1 pint): amzn.to/2GdJ0mm
Bead Maker (1 gallon): amzn.to/2GcUcPT
The Rag Company Creature Edgeless microfiber towels: amzn.to/2PkrSxc
The Rag Company Eagle Edgeless 350 microfiber towels: amzn.to/2PisZgV
The Rag Company Eagle Edgeless 480 microfiber towels: amzn.to/2CNX1X9
The Rag Company Edgeless 365 towel: amzn.to/2qQSI5y
iK Multi 1.5 pump sprayer: amzn.to/2E3H6FS
🇬🇧 For people in the UK: bit.ly/3T5Q2yR
🇫🇷 For people in France: amzn.to/2GsSzzb
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Bead Maker’s unique formulation allows for quick spray application. This time saving product uses binding polymer monomer technology to produce a water beading, brilliant, long lasting finish. Bead Maker may be applied to wet or dry vehicles and is safe to spray on all exterior surfaces. Bead Maker also includes UV protection.
What makes Bead Maker different is the surface migrating molecule that attaches to the paint surface of a vehicle. Once attached this molecule cross-links and polymerizes on the surface thus building a hydrophobic durable layer of protection. Cure time is essentially two hours depending upon ambient conditions. For optimal results, let the product cure for 8 hours. Real world durability is 1 to 3 months of protection.
APPLICATION: For the first application, mist the product thoroughly on the surface until it beads, then wipe using a microfiber towel, flip the towel, and buff to a bright finish. In more humid environments, apply less product on the paint, and more on the microfiber towel. During maintenance washes, you’ll then be able to use Bead Maker as a drying aid, misting just a couple sprays per panel and wiping using your microfiber drying towel.
Welcome to Pan TheOrganizer, a UA-cam channel designed to help people improve different aspects of their lives through fun and entertaining videos!
If you liked this video and found it helpful, click on the thumbs up button and share the video with your friends and family. Don’t forget to click the SUBSCRIBE button if you want to keep on enjoying my future videos. Welcome to the Pan TheOrganizer family!!
►List of equipment I use to produce my UA-cam videos: • BEST UA-cam CAMERA & ...
►You can also follow on social media:
Instagram: / pantheorganizer
Facebook: / pantheorganizer
Twitter: / pantheorganizer
Intro music by Hurley Mower
/ nedmowermusic
#detailing #detailingchannel #detailingtips #pantheorganizer #cardetailing #detailingtutorials #beadmaker #p&s #gamechanger #paintprotectant
⬇🔶 LINKS TO QUALITY DETAILING PRODUCTS & TOOLS ⬇⬇
🇺🇸 For people in USA:
Bead Maker special (1 gallon + 1 pint + 1 Eagle Edgeless microfiber towel): www.amazon.com/dp/B07KGMHJKS
Bead Maker (1 pint): amzn.to/2WestEE
Bead Maker (1 quart): amzn.to/2MjVzhq
Bead Maker (1 gallon): amzn.to/2MdjSgK
The Rag Company Creature Edgeless microfiber towels: amzn.to/2y6yhpo
The Rag Company Eagle Edgeless 350 microfiber towels: amzn.to/2ymYpvl
The Rag Company Eagle Edgeless 500 microfiber towels: amzn.to/2EsPvml
The Rag Company Twisted Loop drying towels: amzn.to/2pZfrM9
The Rag Company Edgeless 365 towel: amzn.to/2TpUHuP
iK Multi 1.5 pump sprayer: amzn.to/2pDhzJk
🇨🇦 For people in Canada:
Bead Maker (1 pint): amzn.to/2GdJ0mm
Bead Maker (1 gallon): amzn.to/2GcUcPT
The Rag Company Creature Edgeless microfiber towels: amzn.to/2PkrSxc
The Rag Company Eagle Edgeless 350 microfiber towels: amzn.to/2PisZgV
The Rag Company Eagle Edgeless 480 microfiber towels: amzn.to/2CNX1X9
The Rag Company Edgeless 365 towel: amzn.to/2qQSI5y
iK Multi 1.5 pump sprayer: amzn.to/2E3H6FS
🇬🇧 For people in the UK: bit.ly/3T5Q2yR
🇫🇷 For people in France: amzn.to/2GsSzzb
My detail guy put me onto this stuff a couple months ago. It’s honestly amazing, better than anything I’ve ever used. I washed Truck last week and applied another coat of bead maker after the wash. My Truck got covered in heavy dust over the last several days, today it rained and not a single spec of dust or dirt was able to stick to my
vehicle.
I think what made this video even more entertaining was watching Pan freak out. Anyone who has been in the business for as long as he has, to still get just right jacked up excited about a product.... clearly still loves his job. Thanks Pan for keeping the rest of us excited about products for our cars.
Hehe thanks man! Yeah even though this video was filmed many years ago now, I still remember my reaction. Back in those days, it really was a game changer for surface slickness. Many have caught up since then, but it still has its place on my shelves.
And yes, even after 26 years of detailing, it's still one of my biggest life passions. I love it! :) And I try to share that passion and knowledge with my audience, which is quickly approaching 1 million subscribers, easily putting my channel in the top three biggest detailing channels on UA-cam. I am grateful to have such a great audience!
I use Bead Maker as a topper to Jet Seal and Butter Wet Wax. I use it as my drying aid on every wash and the results are UNBELIEVABLE. My wife even noticed the feel of the paint when she touched the door handle and she has no idea about this kind of stuff. It performs so well in the weather too. Water just sitting on top in huge globules.
good to hear, I use the jet seal and butter wet wax also
sweet... I use the butter wet wax too and my intention was to do just you say... butter wet wax than use the bead maker as a topper.. can't wait to try it..
I've used this for a few months. I put it on my mother's car which sits outside and is generally neglected. It's still beading up 2 months later. I love it!
I love it too!
What would you recommend to do before all this ? U think me giving a good wash , than clay bar than this ?
9:50 ...best Pan reaction ever and that's all I needed to get some :)
😂😂👍🏻.
As soon as I saw PAN's reaction, I paused the video and order the pint and the gallon. Can't wait for tomorrow's video!!
Much Love Pan. So glad I found your channel. Literally my Hero.
Hehe thanks for your support!
Next video coming live at 1 pm Eastern time. :)
He is my idol too
Thanks guys!
I look forward to trying this. I love the genuine excitement from Pan when he finds a new tool for his arsenal!
😄👍🏻
You said it right Pan. We love value oriented products! I'm definitely feeling this product!
Bead Maker is a winner, great results, minimal effort, user friendly, super gloss, glass like smooth finish.
I use & love the Bead maker. Fun watching Pan calling this a game changer, it really is. Try it, well worth it.
Thanks Chuck!
I am a mechanic and I have some nice tool box's / carts they are powdered coated my box is snap-on my cart is mac. I used supper clean to clean all grease and smudges off. I followed up with dupli colors wax and tar remover. I then applyed bead maker.
Wow no matter what cemicals or grease is on my hands take a clean microfiber and it just wipes away with no effort!! I'm no expert I know it wont last for ever on my tool boxes I will have to reaply like any thing out there .... I love useing this as a drying aid on both of my cars there is no fake hype here this stuff is game changeing! Thank you P&S and thank you PAN! keep ths great videos comeing!!!
Thanks for your feedback and kind words!! 👍🏻
Ok, Pan your reaction blew my mind and I haven’t even seen this product first hand. I am totally sold on this product. I’ve been using Mequiar’s synthetic X-press spray wax, but you’ve convinced me to give P & S Bead Maker a try. Great video Pan. Thanks. 🇨🇦👍
And there is now a little DIY mix of Bead Maker and another product to take it to another level. See my video here: ua-cam.com/video/twuTd2VNlxw/v-deo.html
Pan-Thank you for all the excellent videos. This is my favorite channel packed with awesome content, tips and techniques. Beadmaker is some crazy awesome stuff. Keep up the great work sir!
I just bought a gallon I live in Toronto Ontario because of this video I will test it out and I have a feeling my mind is going to be blown away I will let you know on the results later on.
I really hope this product will be available in Europe soon. When Pan get that hallelujah moment, you know the product is awesome 😄
Heheeh thanks for the cool comment! Thanks for the trust you have in my opinon Mr Wang! ;)
Pan TheOrganizer you are very honest and with a professional approach sharing your knowledge. The best detailing channel on UA-cam!
😉👍🏻
I mentioned it earlier but I just finished applying bead maker on my SUV. Keep in mind that my SUV has approximately four separate ceramic Coatings and have been clayed and d-CON washed. You were right pan, I've never seen that slickness or gloss like this in my life!!! It's insane!!! Can't wait to look in the garage tomorrow morning LOL
👍🏻👍🏻
LOL... I love this video! I had the same reaction when I tried it the first time!! good stuff!! grab some!
Wow...this product looks very promising. I just ordered a gallon from Amazon. Thanks for the great information about this stuff. Keep up the good work.
Thanks Stephen! Let me know how you like it.
Pan the detailing idol! I tried this last week for the first time. I was impressed as well! Its the real deal.
Thanks Ramon!
Love the reaction Pan! It looks like a great product. Can't wait to try. I hope TheRagCompanyEurope will soon have it in there shop!!!
Thanks! Come back tomorrow to watch my full review and tutorial video!
Great video, I’ve been amazed by bead maker, one thing I’ve noticed is how easily snow brushes off so there is an advantage for us Canadians
I agree Sean! With this week’s first major snowfall in Montreal, it worked great!
The Bead Maker product is awesome, I’m glad you got a chance to work with it, as I really trust your reviews, I love the product, awesome 😎
Mustang Ray
Thanks for your support and feedback Raymond!
Make sure you come back Sunday to watch my full tutorial and review video!
Your welcome, and always, great Channel, 😎👍
Thanks! 😄
PAN
I've gotten several vids behind with work and holidays upon us.
Just want to say, THANK YOU!
You have great content and bring to us product reviews that save me from guessing it is worth my hard earned money. You haven't let me down yet.
All the best to you. Merry Christmas and Happy New Year.
Oh thanks for the wishes! Happy holidays to you and your loved ones as well! And thanks for your support James! 👍🏻
Just tried out Bead Maker this morning... it lives up to the hype. Fascinating stuff.
Yup!!
Did you use it as a stand-alone product on bare paint, or as a topper on top of a wax/sealant/coating?
@@PanTheOrganizer I had waxed and sealed it about six weeks ago, so it wasn't bare nor freshly done. Essentially a topper on my 2017 Accord.
This stuff is my drying aid for every wash. Have to agree it is a game changer!!
I made a more recent video about my top drying aids here: ua-cam.com/video/NOTNed04xYE/v-deo.html
Pan you best believe i got a gallon of this stuff coming Friday. This as a topper on my fusso coat is going to be unreal!
Enjoy! And you can further improve it. See my video here: ua-cam.com/video/twuTd2VNlxw/v-deo.html
Best video ever!!! Most genuine reaction I've ever seen. Pan you're the man!
I also love the Rag Company guys!
Glad you enjoyed. How did you discover my channel Jon?
@@PanTheOrganizer Years ago searching UA-cam for the best wax and other auto detailing products. Stumbled across your video and subscribed right away. I can always count on you for "No BS" reviews and the best tips and tricks.
I use Optimum Car Wax - it just works! Bead Maker is very slick but it has the look of a sealant (shiny plastic), not the look of a wax. I guess it is a matter of what one likes.
Exactly. To each their own. OPT Car Wax is very good too!
I use both and I think beadmaker is not as warm as OPT but not as cool as Meguiars Xpress Wax. To me it's a perfect balance looks wise.
Have been using for about 7 months. I love it and 3 of my friends even bought it after seeing results, great product for the money. The whole car justs glows and makes washing a lot easier. I buy it from auto geek when they have their 25% off sales. Have not seen it for sale in Canada yet. 👍
I agree, it’s such a great product. It sets the bar high for anything else I’ll stack up against it in the spray-on paint protectants category.
Pan, Thx for doing these videos and being so positive.
Thanks! It’s important to me that my viewers feel happy after watching my videos. There’s enough negativity as is online. :)
Our hobby/passion is literally at the point where we now have basically "glass in a bottle "type spray detailers!😲Order coming soon!!
Yup!!
Hai Pan, again nice n informative video. I am eagerly waiting for your next detailed informative video. You are a true and transparent UA-cam I have ever seen hence I like your videos.
I leanerned a lot from your videos and maintaining my car in top notch look.
Keep educating us.
Thanks Shaukat! I appreciate the kind words and your support!
Stay tuned for my follow-up video later today. Full tutorial and review of Bead Maker!
So glad you got to visit my neck of the woods Pan. The LADS (Levi, Anthony and Dane) are great bunch of guys! I got the pleasure of touring their media facility in early June while visiting the area for my fiancee's birthday. Got to meet them at the Hidden Springs car show along with Sydni and Bob from P&S. When TRC is on your destination checklist again, I'd definitely love to meet you because I am literally just seven hours to the north! I've been using Bead Maker for over a year and still can't believe the instant slickness so I can relate to your excitement.
Cool!
Hahaha. He’s litterally just 7 hours to the north! As if 7 hours is like a 5 minute bike ride!! Ya muppet.
i'm just laughing and happy seeing you so excited!! never seen you that excited even after getting the new car. you've also asked a question I wanted to know which is awesome and I will definitely apply this product to my wash. the question was if it can be used with out any special coating. looking forward to seeing a video of you using it on your car and others :D
Oh yeah! 👍🏻. Tomorrow you will see my full review and tutorial video! Stay tuned.
I loved your face/reaction to this product... !!!! Priceless. Thank you for sharing this video. ...I gotta get some😉😉😉
I hope you'll watch my follow-up video to this. It's my review and application tutorial: ua-cam.com/video/J7uc4AlarpU/v-deo.html
Nice Pan. I love how the water beaded off of the paint so smoothly.
Yes the product carries its name Bead Maker quite well! ;)
Thank you so much for all the great info and the quick response. Keep up the great work
Thanks!
Just did my wheels that were ceramic coated and holy moly. My tire guy said he was able to mount the tire by hand .. no machine because the wheels were super slick.
👍🏻
I got my quart size of Bead Maker and immediately put a coat on my black 2000 Prowler. I applied it to the dry paint and followed the directions. When I finished the first coat, I went inside and never came back out to the garage until the next morning (after about 11 hours)...I simply could not believe what that paint looked like. It was so shiny, glossy and deep, that I was amazed. I know my paint, and I know how it looks...and this product made the paint look fantastic. I figured, if one coat was good...two will be better, so I put a second coat on the car and walked away again. If there is a better sealant that produces a better slickness and shine than Bead Maker, tell me what it is..until then, I just ordered 2 gallons, because I do not want to be without this product.
Thanks for sharing! Bead Maker is still the king of gloss and slickness in my books. But there is a lot of competition in the spray protectants category. Of of my new favourites for durability and chemical resistance is the Turtle Wax ICE Seal N Shine which I reviewed here: ua-cam.com/video/dn6xBGkBFcU/v-deo.html
Just bought my first bottle to try. Thank you!!!!
🙌🏻👍🏻👍🏻
I've been using it for about 6 months, I am not impressed. It is very slick and glossy, but I drove through a rain storm and washed my truck the next day and all of the slickness and gloss was gone especially the hydrophobic properties. The road grime also seemed to be harder to wash of the surface of the paint as well. I have applied it to several vehicles with the same results. Not trying to bash the product just giving my opinion. I had high hopes for BeadMaker.
Hmm. That's about the opposite from my experience. My truck is much easier to keep clean with beadmaker. I can get it about 90% clean with just foam cannon and rinsing
@@Daviddear30 Maybe my prep wasn't quite right and I have spoke with people that have had both good and bad experiences with it. I do really like it on glass though,I have had it on all of my glass for 6 months and it still beads up like a champ! You definitely need to let it cure though.
I wonder if it would have to do with the cure time needed to properly seal the surface?
@@danmorrissette4814 I did the recommended 8 hour cure time,I still have been experimenting with the cure times and the amount of product per panel,so only time will tell. Thats what I love about the detail industry is experimenting with different products and having discussions like this about different products!👍
Durability isn’t its key feature in my opinion. That’s why I have base layers of ceramic coatings for long term durability. And P&S themselves are honest and don’t make ridiculous durability claims. They say it’s good for 30 to 60 days. I find it’s even more when your car is garaged and well maintained like mine.
The main points for me with Bead Maker are versatility (can be applied on top of waxes, sealants and coatings), gloss, hydrophobic properties and the best slickness to the touch.
Full review and tutorial coming on my channel tomorrow, including tips to apply it correctly depending on what conditions you work in.
I had the chance to speak to Dave Philipps directly, the chemist behind the product, so lots of cool info coming.
Ya, I got this stuff for my car. I had it pro detailed the last 2 years in a row except for this year. I figure this could help me maintain it and I love it!
Yup!
Thanks Pan! I bought Bead Maker after watching this video and used it on my Porsche. Brings paint color out wonderfully but attracts dust. Has anyone else had that problem?
I just ordered the gallon, pint and towels kit. Can't wait to try it out. Thanks for the recommendation Pan. Still catching up on all your videos.
Right on!
I just ordered a gallon. I can't wait to use this on my Mustang.
Thanks for watching! Did you see my full review of it? Here: ua-cam.com/video/J7uc4AlarpU/v-deo.html
@@PanTheOrganizer Yes I did.. Thank you for the great review of this product.
Did a ton of research looking for a good sealant for my garage kept 2018 Mustang GT. Kept coming back to this. Applied it today, and wow are the initial impressions amazing! I'm interested to see how it lasts during these winter months. I think this was the last day in the 60s here for a while.
You should reapply a think layer every two months. I apply some every 2nd or 3rd wash. That’s how much I like it! :)
This stuff is the real deal Pan. I put Jescar Powerlock plus with Collinite 845 combo in May on my Mazda CX-5. Then found out about this stuff and had to try it and did. And late august i put some of this on my Mazda was blown away did a through wash lite decontamination and put this on water hates my car lol.
I agree Ernest. It’s the real deal!
I use Beadmaker with 476s best combo ever.....get that deep wet look with added gloss.
I have never heard of 476s... Is that the name of the product, or the company?
@@PanTheOrganizer 476s is a Collinite wax, it is carnauba and polymer base, Beadmaker bonds really well with it. If you want ultimate wet look and longevity is not a priority get the Marque D'Elegance which has a higher ratio of carnauba.
i hope it will be available in europe soon, thank you pan for this video
I’m already on to my second gallon and I have to say that this product is the real deal!!
🙌🏻🙌🏻
Pan, you're a stud! I love your reaction. LOL. I absolutely love this product!!!
Thanks Adam!! :). Did you see my special "intro" in my follow-up video review/tutorial?
Here: ua-cam.com/video/J7uc4AlarpU/v-deo.html
@@PanTheOrganizer YES! LOL. I just posted a comment there too.
Ok that's perfect thank you so much pan. Bread maker it is . Keep up the great work 👍
Thanks!!
Great video Pan! You mentioned P&S Bead Maker can be used as a drying agent to help prolong the beading effects. After 1-3 months does one need to apply another initial thick coat or will continuous spray when drying be enough? Thanks.
Continuous maintenance will be enough. I use it as a drying aid now.
Make sure you come back Sunday to watch my full review and tutorial video on it!
Seal n Shine lasts much longer and is more economical in the long run!!!!!!
Anther great video Paaaaaaaaan! Would love to see you test that in a ceramic coated car.. Keep spreading the love and positivity...
Thanks! You will see me test this on my own ceramic coated car in Sunday’s video where I give a full review and tutorial. Stay tuned!
Going to grab some of this today following your recommendation 👍
Thanks for watching Andrew! Also check out this newer video before buying: ua-cam.com/video/NOTNed04xYE/v-deo.html
I am very impressed :-) Thank you for sharing
Thanks Nick!
Come back on Sunday to watch my full review and tutorial video!
love this product..ended up getting 3 gallons when it was on sale..
👍🏻👍🏻😎
Hmm, I’ve never tried it myself yet. But maybe I will. However, for a customer car, regardless of the gloss and hydrophobicity, I’d probably have to reach for something else as I would need the 4 to 6 month durability. Definitely would make a nice topper or even a quick sealant though.
Exactly Andy!
I have a 16oz bottle of it. It’s a good product. When this bottle runs out I’ll buy another. But, I don’t think it’s a game changer by any means. It’s slick yes, the water behavior is ok with it. I’d much rather use Reload or IGL Premier. I do think a lot of it is hype in my opinion. Plus the durability is nothing to get excited about. For me it lasted a little over a month. That’s wax like durability. I just don’t see the craze like everyone else sees.
Hi Pan while I think your videos are AWESOME, the products while they are amazing mean little here in Australia as we cannot source them and are extremely expensive to purchase and postage is horrendous. Appreciate the tips though, extremely useful for a novice, and building resources available down this way for maintaining car.
Thanks for the feedback!
The new AUS distributor for TRC will actually be carrying Bead Maker very soon (if they haven’t already started)
Thank you Pan for sharing this gem.
Thanks Igor!
the chem guys synthetic detailer is quite slick after use
Its short term which is a big plus for me , I use it every wash .
👍🏻
Great video... all day I was busy that people lot order beads maker and I was wonder how? No wonder you made vlog today. :)
😄👍🏻
Pan TheOrganizer yeah all gallon and pint are sold.
It gets around 80-88 degrees Fahrenheit with 70-80 humidity here in Hawaii.
Great video Pan! Would love to see a comparison between this and meguairs UFF, I’m a huge fan of UFF. Would be fun to see them paired together as they’re at roughly the same price point
UFF would last longer. BM will give you more gloss and paint slickness.
Here you can see them side by side in a torture test
ua-cam.com/video/LD8fyexP-M8/v-deo.html
I just ordered & can’t wait to try, thanks as always love yeah Pan !!!
Who are the 34 people who disliked this video, what is wrong with them?
Lol welcome to the internet. Some haters just like to hate.
I've been using it for over a month now and its perfect. I'm buying another gallon next week and it's now a staple for my detailing.
Try Sonax Brilliant Shine Detailer and you know who's pwning. 😉
OzzY Oz It’s good but boy is it grabby!
wow 51 seconds im here lol im looking forward to watch what you have for us pan :-)
👍🏻👍🏻😎
Worked great on my Buick, super slick. On my sons Camero the paint was like sandpaper and it didn't work as well...art
Paint preparation is key to get the paint as smooth as possible before applying any form of paint protection. That's a way to ensure to have the paint cleaned, decontaminated and polished, so it can be as glass smooth as possible before you apply any form of paint protection. The protection will not only perform better, but last way longer.
Watch what I do to a vehicle: ua-cam.com/video/tjJPcdCUaK8/v-deo.html
Wow 😯 mind blown 🤯
I have been using it for a fer months now i clayed, polished and waxed my truck sprayed bead maker and gave been using it as a drying agent and this stuff is great it holds up nice i havent waxed my truck in 4 months but i recently purchased 007 from auto fanatics and its legit no comment on protection since i only used it twice but the shine and clarity omg its awesome you need to try this stuff also
I already did a full review video on 007 here: ua-cam.com/video/hdySuqWtZdY/v-deo.html
Is that Anthony dude All Day Anthony? 😀 Great video Pan!
Yes it's him! He works for The Rag Company and also has his All Day Anthony UA-cam channel!
HA!.. That's it ...Matt Moreman approved it... that wasn't enough ... now Pan has approved it... now its time to grab some !
Thanks for the vote of confidence! 👍🏻
great video again pan. thanks 4 sharing 😃😃
Glad to know you enjoyed it!
I'll just have to beleive you, typically it's not available in Australia. Typed in "bead maker" in both eBay and Amazon AU, now I can make myself an awesome bead necklace 🤨
😂😂. Yes I saw that too when looking for it in other countries!
@@PanTheOrganizer lol
You guys mentioned about cure time but what happens if you don’t have a covered area for curing and what is a responsible cure time if vehicle is out in the open?
This product has got my attention 💯
As long as you don't expose it to water or rain for the first critical 2 hours you should be fine. 8 hours is the optimal time, but after 2 hours you should get a great part of the curing done.
not sure about this one, but the problem for those sealant/coating, with the rain, you can't beat the watermark, especially, when you have a dark color paint, like blue, black. even though some products do have great hydrophobic performance, you still have the watermark after the raindrops dried. I'm in the midwest area and the water usually is very hard.
Anyway, thank you for the video.
I find when using toppers like Bead Maker or CarPro Reload, it reduces the chances of water spotting greatly.
@@PanTheOrganizer Okay, good to know. Maybe you could do a test by using hard water on different products and do a comparison. I think it would be an interesting experiment and products review video. Thanks!
Yay, PTO is almost back. (at the intro)
😂👍🏻
Going shopping! Great video BTW!
Thanks John!
Great video Pan!
Thanks!
Pan, like the rest of Your viewers, I thoroughly enjoy this channel!!! Keep up the great work. Be well, stay safe!
Jay
Thanks for the positive feedback Jay!
I’m happy to leave it! You deserve it!
Pan, I just ordered a gallon of this based on your results and opinion.
It doesn’t last long (3-4 weeks) but gloss and slickness are what we use it for. It can be applied on top of any paint protection. Even years after this video, Bead Maker is still a great topper.
I'm very much impressed with the video. I'm living in India. And I tried to buy this Rag company quality products... In India. But I didn't get the link Eagerly waiting for India soon.
Thanks for watching Dinesh!
How did you discover my channel?
@@PanTheOrganizerUA-cam channel Sir..
@@PanTheOrganizer pls help me develop my detailing business. I'm ready to work hard... Passion... And full confidence of personal interest.... Thanks for ur valuable reply sir....
bought 5 litres and thought it was ok,simply not the game changer at all after using Meguiars Ultimate Quik Detailer,the p&s i gave away,although brake buster is still the best
99% of people who try Bead Maker are usually blown away by the gloss and slickness, especially after the 4 to 8 hours of curing. When someone tells me they're not impressed, I'm always curious... What glossier product have you tested??
It’s excellent stuff, it’s in my top 3.
I agree! What’s the rest of your top 3?
Absolutely amazing!!!!!
Thanks for watching Sam. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 860,000 subscribers and we have almost 110 million views! I have been detailing for 25 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Pan do you happen to have a vid talking about the different types of microfiber towels and what their uses can be? I can find it somewhat confusing trying to find out which types are good for glass, or interior, or exterior, polish removal etc. love your vids!
Oh yes Taylor, I do! I did a great 6 part series of videos to demystify everything about microfiber towels with experts from The Rag Company.
You’ll learn everything you need to know in this fun series!
Check out part 1 here: ua-cam.com/video/6dy5PbjT1Cw/v-deo.html
15% humidity! did you guys need some headbands for all that sweat? Come on down to Saint Louis where it sits at 80% and 96 degrees.
Yeah I had never been in a place with such low humidity.
Would love to grab some beer and talk with Pan and all these guys for hours on detailing
👍🏻
Very similar to Sonax Brilliant Shine Detailer which I am using at the moment. Except this may have a bit more of a slicker feel.
Amazing results from Dubai. Heat or not, beadmaker is on fire.
👍🏻
The slickest product I have ever used is System X Diamond SS ceramic coating. Silky smooth
No spray top coat nedded.
Hey Pan ... please compare to AF 007 Gloss Enhancer which was your recent #1 pick
This is now my top in the category. 007 is very very good though.
WOW tho just seeing your reaction to this product it speaks for itself
😎
Love this stuff..use it as a drying aid
Totally! Watch my full review of it in tomorrow’s video!
my ultimate favorite video to date :)
Cool! 👍🏻
Great, but have you done a review on the Meguiars ceramic spray wax? Trying to get an idea to go with
Jescar Power Lock+ is just as slick, glossy and last up to a year!!!!!