Dirt Cheap Throttle Body Upgrade For 4.6 2v
Вставка
- Опубліковано 7 вер 2024
- A super cheap way to upgrade your throttle body on a 4.6 mustang, crown vic, or other 4.6 2v engines by using a 70mm factory throttle body off a Lincoln Aviator 4.6 4v or Ford Econoline Van with a 5.4 2v.
Your level measurement was forgiven by the gasket measurement 👍
The take away from this video is a mostly bolt on NA 4.6l engine without blower nitrous or cams a 75 mm TB is actually to big and you lose a ton of low end response time and power and only a small amount of gains at the top so a 70mm TB is actually a good all around performance upgrade for these applications over a 75mm and you can usually sell off the 70mm when you upgrade to larger needs. By going this route you avoid having to shit out $250 for a slightly larger TB you might out grow in a short period of time. Going to look for one of these at the salvage yard for my nephews car.
You won me over with the level measuring. Never accept defeat.
😂😂😂 if it works it works right lol ive since upgraded to a digital caliper so I'm moving up in the world
Thank you soo much. Im always looking to save on something and this will definitely be on my list.
Your trading velocity for volume, which will lessen your lower end torque and add to your higher rpm power minimally…
BTW i believe thete is an adjustment to the cruise control cable somewhere. You should be able to get it to fit .
Awesome video. I love the ingenuity. Did you notice any difference in how it drove after you switched. I just bought a 98 4.6 2v and have been devouring everything I can find. Im new to Mustangs. And fords actually lol
Ehh I noticed a little more throttle response, if it gained a few hp its hard to notice
You could always cut the the cruise control post off and weld accordingly
Your voice loosened up my bowels
You can get a 75mm on ebay for $35 for the 4.6 2v
This lmao
but why would you go with a cheap chinese part when you can get one with Ford QC
@@deltadetrix why not? It just opens and closes, not rocket science, not like ford parts are American made either.
@@centraltexasfoxbodies sure it opens and closes but does it seal? is it out of round? does it stick? but its your money and if you want the cheap stuff you can buy it
Mainly because it needs to look stock to pass tech at the track! An aftermarket tb is almost an automatic dq
Grand Marquis also
I have a 93 Lincoln town car I’m trying to do this to but not sure if it will work
It should. I don't see why it wouldn't besides linkages possibly being wrong
What about 4.6 2v explorer limited?
65mm vs 70mm
Can you put your stock tb sensor frm the 65mm on to the 5.4 one? Ive been running my 70mm but every time i install it back on my fuel gauge needle goes higher than it was before i took the 65mm off
It has no correlation to fuel level what so ever. And yes it should work fine
Had it ever even occurred to you to simply modify the bracket that HOLDS the cruise control cable ? as in cut out the part that hold the cable and re weld it closer to the throttle shaft? As in get a bracket from the junkyard and hack it up instead of yours in case there is an issue.
Yeah I ended up modding it a little to make it work
I have a 1999 4.6 F150 if I put the bbk throttle body on it how much horsepower that giving I know not crazy a lot
Idk maybe a 5-10hp. It mainly helps throttle response more than anything
Any idea if this would work on the 4.6 2v in the F-150s? 2007
A 2007 would be a drive by wire throttle body so it's a totally different setup.
Why don’t you just take the cruise control clip off the Lincoln Navigator with a screw driver or something and put it on the stang if it’s shorter on the navigator.
I didn't have it. Tried to work with what I had
@@itsoundzgood Ok boss I’ll see if it works idk if it does
@@thebrinster7456 I just slightly bent the mustang throttle linkage and it was just enough for it to work
@@itsoundzgood Oh ok
Town car? Too mine has a 4.6
It might work with a little modification 🤷♂️
What about the 05 grand marquis?
I think the throttle linkage is a little different
@@itsoundzgood but it has the same 4.6L 2v v8 engine you feel me?
@@rafaeltafolla7641 yea but their different drive by wire vs drive by cable
Dumb question but does anyone know if this works on the 4.6 2v f150?
I think so but you will have to use a 5.4 f150 throttle body. The linkages are different on the f150s
Did it go faster or just suck more fuel
Didn't change fuel consumption at all. It helped throttle response a little and maybe a little bit more power
What year aviator??
Any of them with the 4.6 4v
Lol boy you really didn't tale the time to find a proper tape measure. Lolol
I sure as hell didn't lol but hey yall get the idea