Greetings from australia again Its always enjoyable to see the diversity of work that passes thru your repair facility It keeps you alert and on your toes Stay safe and keep up the great work
absolutely perfect, i check almost everyday your videos, your work is even better than from the factory, and u are a super friendly person, keep it up !! greets from Belgium.
I have the exact same issue with mine A friend inserting a android charger by froce So now it won't charge How much would this repair cost ? (Not in a hurry)
If the beats charging lights comes on normally but when i unplug the charging cable, the charge goes to zero power as battery don't hold charge. Would this be bad charging port or bad battery?
@@NorthridgeFix it a galaxy note 9 and s9 plus i never drop this two phone no water damage no over charge, this happen after i put my phone on wireless charging it start to flickering after 12 minutes i leave both phone on it. Thank your for the reply
First congratulations on the great work done !! I have a copy of this one here in Brazil with the damaged Lightning connector, is it possible that you tell me where I can buy the Lightning connector or would you send it to me? if yes what is the contact or link for purchase and shipping to Brazil, is it possible to remove from some iphone model ??
Pode me dizer um link onde posso comprar um conector como este? Eu tenho o mesmo equipamento para reparo na minha bancada aqui no Brasil e eu não posso comprar esse conector
I just love the way how you, analytically, decide how to approach each different challenge
Best repair guy on UA-cam. If you’re into soldering for work or pleasure you won’t go wrong subscribing to the channel!
If I could find employees with this attitude and pride in their work I would work till I was 100. He is such a joy to watch!
Greetings from australia again
Its always enjoyable to see the diversity of work that passes thru your repair facility
It keeps you alert and on your toes
Stay safe and keep up the great work
I absolutely love this guys work, he thinks out side the box!
Thanks brother
I need this exact job doing in the UK, I'm struggling to find someone. Top job by the way.
absolutely perfect, i check almost everyday your videos, your work is even better than from the factory, and u are a super friendly person, keep it up !! greets from Belgium.
Even at 5:40?
Dismantling n Putting it back strategy is superb. Thx for the knowledge shared
How can it work with the connector desoldered at 5:50, not one pin making contact!!!
Yeah, I was watching that connector bubbling and melting. I hope he tested it before shipping D:
Is the low melt soldet only used to lower the melting point of the solder joints or is it also used for soldering components?
Really good job👍 looks like an operation in a hospital 😂 awesome desing of the board, awesome job.
That's it. I had to order the low melt solder and your solder braid. It looks so much faster than the solder sucker. Order placed.
My micro charger port pins broken..do you know where can I get the parts online?
Nice job. Great idea how to fix this.
VERY HARD AND BEAUTIFUL JOB THANK YOU SIR
Love to see your beautiful work
Kindly told us the blower speed and temp of the hot air gun from your soldering station.
Where can I obtain the lightning charging port? Do you happen to have a part number for it?
rather than desolder the aux connector heat uo the black rubber and pull the charge board out this allows full access with minimal effort
Are you in the US? How much for this fix?
Where did you get the nee charging port from?
What did you charge for the repair?
I have the exact same issue with mine
A friend inserting a android charger by froce
So now it won't charge
How much would this repair cost ?
(Not in a hurry)
Great Job ! Could you do a video about the soldering irons tips you are using ?
Was thinking of that myself. I have various tips but not like the bent tip he's using.
Detecting Dazza can you guide us to the video ?
I"ll do one soon.
NorthridgeFix جزاك الله كل خير
If the beats charging lights comes on normally but when i unplug the charging cable, the charge goes to zero power as battery don't hold charge. Would this be bad charging port or bad battery?
Could be either really
Hi, i love your job i have a nice touch. Can i ask you what cause a phone to flickering white screen if you try to lower the brightness below 70%
Hard to tell. It could be a lot of things depending on the make and model of the phone.
@@NorthridgeFix it a galaxy note 9 and s9 plus i never drop this two phone no water damage no over charge, this happen after i put my phone on wireless charging it start to flickering after 12 minutes i leave both phone on it.
Thank your for the reply
@@CCellService Hi, apparently this issue is quite common with AMOLED in the S9+. Try the "OLED Saver" app, which purportedly works.
First congratulations on the great work done !! I have a copy of this one here in Brazil with the damaged Lightning connector, is it possible that you tell me where I can buy the Lightning connector or would you send it to me? if yes what is the contact or link for purchase and shipping to Brazil, is it possible to remove from some iphone model ??
hello did you source one ?
@@kilner79 I still haven't got it, I haven't found it for purchase nor a card that has the connector nor the connector
@@matheusfelipe2776 I have found it
@@matheusfelipe2776 it comes in white and black also
What beat pill+ that won't charge nor turn on, and drain battery instantly?
I did one of those a while back. Fun times.
Pode me dizer um link onde posso comprar um conector como este? Eu tenho o mesmo equipamento para reparo na minha bancada aqui no Brasil e eu não posso comprar esse conector
what flux do you use?
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10g-syringe-plunger-2-needle-sizes/
Best job 👏
Sir is it possible or not to send low melt solder to India
Yes we ship worldwide. Choose india during checkout.
Great job and video
Awesome like always
شكرا اخي العزيز
Good job!
موفقك ...عمل ممتاز
😍😍😍 خلص
أحسنت . مركز منيح
Better than Factory!
Thank you M.r
Thanks
Masha allah good job
That's a really screwy design. 😎
GOOD JOB
Awesome
❤️❤️❤️❤️
Great video! But, BEATS are garbage.......
Ya خلاص
الأخ لبناني؟
Please reply sir