Your respect for your mother and for the big boss are deep emotions for people who are very nice to watch in your videos and you are still a boy in the heart because you are happy when you press the switch and it goes to the device , is still the same with me. nice your videos thanks you make my day more beautiful
On that flash drive. Having a resistor of anything in the megohms will have zero effect on a resistor that reads 4ohms. So I don’t get the part where you say you removed what is pretty much an open circuit resistor to get a reading of the resistor next to it. 🧐
Love the videos cuz. Just subscribed a few days ago. The fact that your also from my hometown Northridge CA was pretty dope. Showing my support all the way from AZ. I've been binge watching your videos for the past 3 days. No question you love what you do. I can tell when you bring the device back to life you get a bit of dopamine rush. I see it in your face when the unit is fixed in every video. 😃 keep up the good work 👏 👍.
About that mercedes key, you should always check the old button with continuity test befor puting it back because it could happen that button si not good, had that situation.
My 50 years of electronic experience tells me that all the Flash drive controllers are identical but have different part numbers. Like when i first started in this field they had books called substitution handbook. just look at how the circuits boards are laid out and you can use the controller on the same motherboard
very simple question from an amateur : R7005 resistor on 820-2850 schematic is 20 Ohms and when I check with multimeter it shows 2,384 kilo ohms! is this a correct measurements? Is 2,384 equal to 20 Ohms? thanks
When checking USB connectors keep in mind that even though the connector may look good there may be corrosion on the surface that can't be seen with the naked eye so use the V meter to check that the device to see it is receiving good power and use a scope the see if the device is receiving good data.
Your respect for your mother and for the big boss are deep emotions for people who are very nice to watch in your videos and you are still a boy in the heart because you are happy when you press the switch and it goes to the device , is still the same with me. nice your videos thanks you make my day more beautiful
On that flash drive. Having a resistor of anything in the megohms will have zero effect on a resistor that reads 4ohms. So I don’t get the part where you say you removed what is pretty much an open circuit resistor to get a reading of the resistor next to it. 🧐
Love the videos cuz. Just subscribed a few days ago. The fact that your also from my hometown Northridge CA was pretty dope. Showing my support all the way from AZ. I've been binge watching your videos for the past 3 days. No question you love what you do. I can tell when you bring the device back to life you get a bit of dopamine rush. I see it in your face when the unit is fixed in every video. 😃 keep up the good work 👏 👍.
About that mercedes key, you should always check the old button with continuity test befor puting it back because it could happen that button si not good, had that situation.
It’s always a ton of knowledge I get from this channel. Keep up the great work man
Keep up the good work.. an excellent way of troubleshooting...
Love your videos! 💕
Hello, can you direct me to where I can find the software that was used to reprogram the EFI chip? Thanks in advance
My 50 years of electronic experience tells me that all the Flash drive controllers are identical but have different part numbers. Like when i first started in this field they had books called substitution handbook. just look at how the circuits boards are laid out and you can use the controller on the same motherboard
Great job again like always
on reprogramming the flash did you have to un-solder the chip, could you have used clip without un-soldering the chip?
4 in 1! 🤗🤗🤗🤗🤗🤗🤗
Its efi same as icloud lock?????
Perfect wins there! All those happy customers gets a 👍 from me. 🇬🇧
Great work....
Whats the reader and the software for the EFI ship?
if donor drives are so hard find do usually reuse donor parts again,i mean using same part on multiple drives after data recovery.
Nice ... my new goto electronics repair channel ... great videos and info ...
12:39 Good idea, I'll do the same
very simple question from an amateur :
R7005 resistor on 820-2850 schematic is 20 Ohms and when I check with multimeter it shows 2,384 kilo ohms!
is this a correct measurements? Is 2,384 equal to 20 Ohms? thanks
You can't measure resistance "in-circuit". Well, you can, but you will not get the actual resistance value.
well done
hi what is the flir model
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dflir%2Be60%2Bthermal%2Bimager%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dflir%2Be60%2Bthermal&campid=5338440312&toolid=20008
Why don’t you buy a new lexar usb for 10$ and charge an extra 10$ on the repair
Cause there are no guarantees that it will have the same controller even if the shell looks exactly the same
curtis oneill and if it was the same?
@@onetruth3050 well, that would be awesome, but that's not the world we live in.
Bom back to life 👍😊
good job and have nice weekend big boss .. whats your name and big boss name 😀 ?
good sr
When checking USB connectors keep in mind that even though the connector may look good there may be corrosion on the surface that can't be seen with the naked eye so use the V meter to check that the device to see it is receiving good power and use a scope the see if the device is receiving good data.
6 million pieces 😁😁😁😁
Smallest efi tool
Big boss is your boss or it's a nick name
Big Boss is his uncle and it's a nick name...
I always thought big boss meant owner?
First 😋😋
+ 1