Thank you so much sir, this video proved very very helpful for me. Thanks alot. May God bless you 🙏 you don't know by doing this you are helping Many people
Interesting, that is a deep clean. I usually take the print head off and soake the tip of the print head in warm to hot water for 2-3 minutes to break down any dried ink in the port jets. This works for me, but this is an alternative.
Thank you for this tutorial which made me understand a lot of things. I had refilled an empty print head (HP 62XL) with ink from a new cartridge that did not work. Unfortunately, it didn't print anything at all. I tried many methods, cleaning the heads by the printer, soaking in hot water, in alcohol, nothing worked. Out of curiosity I put my mouth on the print head and sucked gently. At first, nothing came. Then something came out and I rinsed my lips and put my cartridge back in the printer and started printing right away: it was perfect.
No, not really. In fact, what warned me that the ink was coming was that I smelled it, very characteristic. Then I rinsed my lip, rather by conscience, because I did not see any black trace.
I have tried what you have tried too but no help . But sadly "sucking" method also doesn't work in my case . Again and again I tried but only black teeth and tongue happened.
Never take the covers off. I fallowed a refill video that showed that method and every time I tried to print something after using that cartridge I would need to refill it before I started. It is the same as leaving the cover off a marker. If the covers come off you need to have a way to reattach them so that they remain perfectly sealed as they were before you removed them. A couple of dabs of crazy glue on the sides won't cut it. The old glue needs to be filed off bot the cover and the base, and something I have yet to discover needs to be used to reattach the cover to the base in a way that it is perfectly sealed.
BCH sells a conversion kit and they have videos here on UA-cam that show you in great detail how to use them. If you follow their directions it totally works. If you don't want to do it yourself you can send them your old cartridges and they will convert them for you. They have a video that shows you the options and how to order on their site. They may even just sell converted ones...not sure.
@@heatherpagefiberfreak4230 Just buy a primer for $3 and NEVER take off the cover. If you don't manage to get a perfect seal when you put the cover back on, the ink will drip onto the inside of your printer and you will find the cartridge needing to be refilled every time you go to use the printer. Also, I'm not sure why you would ever run water over your sponge. That's another example of what not to do.
While you are correct a couple of dabs of crazy glue won't seal it, you need to apply a bead around the entire perimeter of the top of the cartridge before re-attaching the lid. Doing anything less will, of course, leave air gaps and not seal it.
@@ColHogan-zg2pc - So why bother taking the chance. Why not just drill the hole and plug it like every other how-to video explains. I've been doing it that way now for years and never had a problem.
This probably took less than 30 minutes in total, and instead of needing to buy a cartridge that is no longer manufactured, they can refill this and save 20$ every 300 pages or so (instead of buying and wasting a new cartridge).
hi can I use pigment ink on 745s and 746s? on the official website the specs of this cartridge says it is Type : Pigment base. but I don't see anyone refilling it with pigment inks
Always use your printer to avoid ink drying on nozzle or clogging. At least every other day. Print a very small CMYK Bar so that all ink color are used to make it always wet. Leaving your printer off for how many days can cause ink drying that leads to printer head nozzle clogging.
Thanks bro! I was planning to keep my present printer and use the old one to consume my newly bought ink before we leave. Thanks Ive seen this advice of yours. ❤
I tried all other methods like steaming and soaking in hotwater, cleaning with earbuds, tissues, Alcohol based cleaner etc.. nothing worked for me.. finally I tried this as a last resort before almost decided to buy new cartridge.. surprisingly this thing actually worked and I used shoefixer to glue it back in place
How to clean the nozzles of a dry printer cartridge in a 3 seconds. You need to immerse the printer cartridge halfway, nozzles down, for 2 - 3 seconds in boiling water, pull it out and wipe it. Let me explain: boiling water will slightly soak the dried paint and the internal pressure will “break through” and wash the nozzles with ink that is inside. True, the cartridge will “lose” some ink. If it still won't print, it means there is no ink in it.
Bonjour. S'il vous plaît sur ma page test un seule bande de Magenta apparaît et une seule bande de Yellow; ce qui fait que quand j'imprime ce n'est que le bleu et le noir qui sortent pourtant quand je nettoie la tête d'impression je vois bien toutes les couleurs qui sortent que faire s'il vous plaît ?
De todas formas no se corrigió el problema. El problema estaba en las boquillas, no había la necesidad de abrir y lavar el cartucho, además el thiner puede dañar el cartucho o sus componentes. Si se hubiese corregido el problema el cartucho hubiera pintado una raya más larga y sólida en el papel desechable al final del vídeo, pero en su lugar pinto una línea discontinua, señal de que la falla persiste.
@@adolfocabello917 Remoja el cartucho, solamente las boquillas en un recipiente con agua caliente y revisa con el palel de baño si se corrigió, tiene que pintar una raya continúa y solida.
@@komodiemo93 Es necesaria la entrada de aire por la parte superior para que pueda salir la tina por las boquillas, de otro modo se crea un vacío el cual impide la salida de la tinta.
Merci pour ce tuto qui m'a fait comprendre plein de choses. J'avais rechargé une tête d'impression vide (HP 62XL) avec l'encre d'une cartouche neuve qui ne fonctionnait pas. Hélas cela n'imprimait rien du tout. J'ai essayé plein de méthodes, nettoyage des têtes par l'imprimante, trempage dans l'eau chaude, dans l'alcool à 90, rien n'a fonctionné. Par curiosité j'ai mis ma bouche sur la tête d'impression et j'ai aspiré doucement. Au début, rien n'est venu. Puis quelque chose s'est débloqué et je me suis rincé les lèvres et j'ai remis ma cartouche dans l'imprimante et lancé tout de suite une impression : c'était parfait.
Bonjour. S'il vous plaît sur ma page test un seule bande de Magenta apparaît et une seule bande de Yellow; ce qui fait que quand j'imprime ce n'est que le bleu et le noir qui sortent pourtant quand je nettoie la tête d'impression je vois bien toutes les couleurs qui sortent que faire s'il vous plaît ?
I have orinting quality problem Sir can u help me? my cartridge is new and bought it online , but the quality of print isn't smooth.. its like leaking when printed ink is spreading from the letter printed and may printer has leak under
What did you use to spray the inside of the cartridge? You called thinners Is it in fact turpentine? Also what does a person use to clean the sponge that is inside a cartridge?
i refilled my cartridge but still it says i have no ink and also sometimes i print blank paper and sometimes i print text that are not fully there. whats is wrong? is it the chip or what?
2 роки тому+10
YO RECOMIENDO USAR ALCOHOL ISOPROPILICO EN LUGAR DEL TINNER
I put the hp cartridge in hot water. The next day, I started to get cartridge error. Solution etc. does not help, why might it have happened. Could he have made a chip error? Chip repair?
Bro, I accidentally dropped ink on copper part and cleaned it with earbud but now there is one spot on copper part, and it is not printing well, it print some pages and then it print blank pages. What to do bro, please help
Sir agar main printer settings me as a Plain Paper mode select krke print krta hu to hmesha paper jam ho raha hai agar same a4 size paper ko as a Photo Paper mode select krke print krta hu to sahi nikalta hai. Sir ese kyu hota hai? Mera printer canon 3010 hai.
Nah never do that once you remove the cover the airtight of the cartridge is broken and no mater what you do the ink will automatically drips into its nozzle messing up the printer inside
@@proudpinoy_22 kunting maling hawak mo lang sa cartridge pag nag refill ka sira na yan di na gagana mas mabuti pa bili ka nalang bago kahit mahal or else bili ka nalang ng epson or canon printer lesser price pa ink pero up to 80000 can be printed black and colored pa.
Dint do this i repeat dint do this if you want just leave the print head in warm water overnight but dont let water inside the cartridge cause it causes vapour bubbles which is worse then dried ink in the cartridge
Anybody Don't do this process, i lost my working cartridge by this process. Use hot soldering iron. Cut upper cover. Pull sponge clean and refill. It will work. But don't vibrate them. It,s printed bus bar is very thin. It will dammage when u try with knife and hammer.
Thank you so much sir, this video proved very very helpful for me. Thanks alot. May God bless you 🙏 you don't know by doing this you are helping Many people
Boht achi information di ...tnx bro teri bjh se mene 2 cartridges theek kr di ghar pr hi
bhai mere ink printer me dalne ke baad print nai kar ri hai but bhar nikal ke uske nozel ko paper pe laga rha hun to chal ri hai kya esa hi hota tha
Interesting, that is a deep clean. I usually take the print head off and soake the tip of the print head in warm to hot water for 2-3 minutes to break down any dried ink in the port jets. This works for me, but this is an alternative.
Thank you for this tutorial which made me understand a lot of things. I had refilled an empty print head (HP 62XL) with ink from a new cartridge that did not work. Unfortunately, it didn't print anything at all. I tried many methods, cleaning the heads by the printer, soaking in hot water, in alcohol, nothing worked. Out of curiosity I put my mouth on the print head and sucked gently. At first, nothing came. Then something came out and I rinsed my lips and put my cartridge back in the printer and started printing right away: it was perfect.
No, not really. In fact, what warned me that the ink was coming was that I smelled it, very characteristic. Then I rinsed my lip, rather by conscience, because I did not see any black trace.
Thanks It worked for me too, But I just can’t believe that my first kiss is with a catridge..
@@joshm4max LOL 😂😂😂
I have tried what you have tried too but no help .
But sadly "sucking" method also doesn't work in my case . Again and again I tried but only black teeth and tongue happened.
@@smyureka3055 If you received a black tongue and teeth, then the ink flows! The problem is why it stops.
Never take the covers off. I fallowed a refill video that showed that method and every time I tried to print something after using that cartridge I would need to refill it before I started. It is the same as leaving the cover off a marker. If the covers come off you need to have a way to reattach them so that they remain perfectly sealed as they were before you removed them. A couple of dabs of crazy glue on the sides won't cut it. The old glue needs to be filed off bot the cover and the base, and something I have yet to discover needs to be used to reattach the cover to the base in a way that it is perfectly sealed.
BCH sells a conversion kit and they have videos here on UA-cam that show you in great detail how to use them. If you follow their directions it totally works. If you don't want to do it yourself you can send them your old cartridges and they will convert them for you. They have a video that shows you the options and how to order on their site. They may even just sell converted ones...not sure.
@@heatherpagefiberfreak4230 Just buy a primer for $3 and NEVER take off the cover. If you don't manage to get a perfect seal when you put the cover back on, the ink will drip onto the inside of your printer and you will find the cartridge needing to be refilled every time you go to use the printer. Also, I'm not sure why you would ever run water over your sponge. That's another example of what not to do.
nah just buy some T-1000 glue that is usually use for smartphone. those glue when it cured becomes rubber. that rubber become the sealer.
While you are correct a couple of dabs of crazy glue won't seal it, you need to apply a bead around the entire perimeter of the top of the cartridge before re-attaching the lid. Doing anything less will, of course, leave air gaps and not seal it.
@@ColHogan-zg2pc - So why bother taking the chance. Why not just drill the hole and plug it like every other how-to video explains. I've been doing it that way now for years and never had a problem.
5:03 Why am i laughing so bad 😂
I used that method, it saves money.
Bro spent his whole day to save 20$ great job bro 👏
7$ 😂
This probably took less than 30 minutes in total, and instead of needing to buy a cartridge that is no longer manufactured, they can refill this and save 20$ every 300 pages or so (instead of buying and wasting a new cartridge).
🤣🤣
try $80
hi can I use pigment ink on 745s and 746s?
on the official website the specs of this cartridge says it is Type : Pigment base.
but I don't see anyone refilling it with pigment inks
Always use your printer to avoid ink drying on nozzle or clogging. At least every other day. Print a very small CMYK Bar so that all ink color are used to make it always wet. Leaving your printer off for how many days can cause ink drying that leads to printer head nozzle clogging.
Thanks for sharing!
Thanks bro! I was planning to keep my present printer and use the old one to consume my newly bought ink before we leave. Thanks Ive seen this advice of yours. ❤
Just leave it on so the printer can trigger a maintenance cycle at preprogrammed intervals to keep the printer heads clean.
I tried all other methods like steaming and soaking in hotwater, cleaning with earbuds, tissues, Alcohol based cleaner etc.. nothing worked for me.. finally I tried this as a last resort before almost decided to buy new cartridge.. surprisingly this thing actually worked and I used shoefixer to glue it back in place
Is it still working
For colour Is the same?
Dhoni's big fan ❤❤
Thank you for this ‼️
How to clean the nozzles of a dry printer cartridge in a 3 seconds.
You need to immerse the printer cartridge halfway, nozzles down, for 2 - 3 seconds in boiling water, pull it out and wipe it. Let me explain: boiling water will slightly soak the dried paint and the internal pressure will “break through” and wash the nozzles with ink that is inside. True, the cartridge will “lose” some ink. If it still won't print, it means there is no ink in it.
Wow 176K views🥰🥰🥰 congratulations
am asking brother where to get the machine parts of canonE 4270 in Kolkata
Bonjour. S'il vous plaît sur ma page test un seule bande de Magenta apparaît et une seule bande de Yellow; ce qui fait que quand j'imprime ce n'est que le bleu et le noir qui sortent pourtant quand je nettoie la tête d'impression je vois bien toutes les couleurs qui sortent que faire s'il vous plaît ?
It's working bro. Tq
🤝
Help me....what caner do you use...?
Super! Thank you very much!
VERY GOOD VIDEO
Thanks. But what is the alternative for thinner?
IPA
I have exchanged coloures on my printer hp 2320 so how can I do thank u ?
Thank you for this tutorial
شكر لكم لقد نجحت الطريقة❤
apne jo ink dia cartridge me oh ink ki normal print wala black print?
De todas formas no se corrigió el problema. El problema estaba en las boquillas, no había la necesidad de abrir y lavar el cartucho, además el thiner puede dañar el cartucho o sus componentes. Si se hubiese corregido el problema el cartucho hubiera pintado una raya más larga y sólida en el papel desechable al final del vídeo, pero en su lugar pinto una línea discontinua, señal de que la falla persiste.
me paso lo mismo, recomiendas compras unos cartuchos nuevos??
El problema de los cartuchos es que tienes que asegurar que no les entre aire por arriba, así he podido pasar imprimir por más de 4 meses de la 664
@@adolfocabello917 Remoja el cartucho, solamente las boquillas en un recipiente con agua caliente y revisa con el palel de baño si se corrigió, tiene que pintar una raya continúa y solida.
@@komodiemo93 Es necesaria la entrada de aire por la parte superior para que pueda salir la tina por las boquillas, de otro modo se crea un vacío el cual impide la salida de la tinta.
@@rtozzz Gracias
My 745S black cartridge is not responding,not printing.I had i injected fountain pen ink🤪 before and now HP ink . Should i clean like this
Noooooooooo you broke it just get a new one that head is blocked for life fountain pen ink is not for printing 🤦🤦🤦
great, it worked!
Merci pour ce tuto qui m'a fait comprendre plein de choses. J'avais rechargé une tête d'impression vide (HP 62XL) avec l'encre d'une cartouche neuve qui ne fonctionnait pas. Hélas cela n'imprimait rien du tout. J'ai essayé plein de méthodes, nettoyage des têtes par l'imprimante, trempage dans l'eau chaude, dans l'alcool à 90, rien n'a fonctionné. Par curiosité j'ai mis ma bouche sur la tête d'impression et j'ai aspiré doucement. Au début, rien n'est venu. Puis quelque chose s'est débloqué et je me suis rincé les lèvres et j'ai remis ma cartouche dans l'imprimante et lancé tout de suite une impression : c'était parfait.
miam miam l'encre c'est délicieux !
Bonjour. S'il vous plaît sur ma page test un seule bande de Magenta apparaît et une seule bande de Yellow; ce qui fait que quand j'imprime ce n'est que le bleu et le noir qui sortent pourtant quand je nettoie la tête d'impression je vois bien toutes les couleurs qui sortent que faire s'il vous plaît ?
Don't try this it just distroy your cartridge instant of this you can buy new cartridge or just give same hot steam it can work properly
I'm encountering same problem with my g2024 black catriage. When I sent print, some of it can print clear but at the end, it can't be clear.
Now you need to learn how to take care about water, not to waist it, not to contaminate it.
I have orinting quality problem Sir can u help me? my cartridge is new and bought it online , but the quality of print isn't smooth.. its like leaking when printed ink is spreading from the letter printed and may printer has leak under
Здраствуйте! Мастер случайно проткунул при заправке фильтр катрижа можноли гермитиком намазать точку или все выросить? hp123
What did you use to spray the inside of the cartridge? You called thinners Is it in fact turpentine? Also what does a person use to clean the sponge that is inside a cartridge?
Eau déminéralisée et nettoyage aux ultras sons font bien l'affaire aussi
What is the liquide?
Super 🎉
i refilled my cartridge but still it says i have no ink and also sometimes i print blank paper and sometimes i print text that are not fully there. whats is wrong? is it the chip or what?
YO RECOMIENDO USAR ALCOHOL ISOPROPILICO EN LUGAR DEL TINNER
no se daña el chip con el agua?
@@jesusantoniomartinezmendoz6220 no se daña pero causa óxido y hace falso contacto
What to do if not loading paper?
Es importante usar tintas originales para evitar esto y utilizarla poro menos una vez a la semana
I put the hp cartridge in hot water. The next day, I started to get cartridge error. Solution etc. does not help, why might it have happened. Could he have made a chip error? Chip repair?
Bro, I accidentally dropped ink on copper part and cleaned it with earbud but now there is one spot on copper part, and it is not printing well, it print some pages and then it print blank pages. What to do bro, please help
Same to me
I did cleaning of old print head , green ink leaked in my printer
I think that green ink is a combination of blue and yellow color. Check your color cartridge.
Sir agar main printer settings me as a Plain Paper mode select krke print krta hu to hmesha paper jam ho raha hai agar same a4 size paper ko as a Photo Paper mode select krke print krta hu to sahi nikalta hai. Sir ese kyu hota hai? Mera printer canon 3010 hai.
As my experience i do this also but until i notice the problem that it was the printer drum which cost much
That kind of printer has no drum. What are you talking about
What kind of experience can you have with a printer drum in an inkjet printer which does not have any such drums?
Thinner is the Key, Thanks
Excelente
super boss
dites print sama aja 😂😂
Thanks, but when I open the lid, the cartridges are not coming to the center position.
No gloves? Crazy. Surely just put some new ink in through the hole on the top get suction kit and suck blockage out
Non sempre è sufficiente.
@@motiveautoPaul versuchen mit warmem Wasser
How is possible that cartridge is only a sponge, u open it (to clean it 4 example) and the printer detects that it was altered?
is just a sponge!! 😮😱
Doea it work
Truly! This is a very tedious process, it may even damage the copper circuit. Don't ever try this at home.
Disclaimer: Don't try this at home.😁
why bro?
Too risky 😅
Unless bought the new one and try on the old catridge
@@natalisnts0145you damage your printer head.
I always do this and no problem with that
Nah never do that once you remove the cover the airtight of the cartridge is broken and no mater what you do the ink will automatically drips into its nozzle messing up the printer inside
I tried this metode like this video a couple years ago and the cartridge and it up dead.. And never be recovered..
Sira agad yung printer mo pag nag try ka nito bili ka nalang bagong cartridge pag ganyan 😂
Sir paano po pag mali ung nalagay na ink, possible na iopen ung cartridge at linisin?
@@proudpinoy_22 not advisable to refill inks but instead buy new cartridge ink po.
@@proudpinoy_22 kunting maling hawak mo lang sa cartridge pag nag refill ka sira na yan di na gagana mas mabuti pa bili ka nalang bago kahit mahal or else bili ka nalang ng epson or canon printer lesser price pa ink pero up to 80000 can be printed black and colored pa.
Dint do this i repeat dint do this if you want just leave the print head in warm water overnight but dont let water inside the cartridge cause it causes vapour bubbles which is worse then dried ink in the cartridge
Print er head was gone... idea ii's very bad😢
Printing me aane bali lining kaise theek hogi
Ok lang po ba mabasa yung nasa unahan ng cartridge para maka connect sa printer
👑JESUS IS LORD👑🙏 AND ♥LOVES♥ YOU ↩REPENT↩ AND BELIEVE IN THE ✝GOSPEL✝ I LOVE YOU!!!
sangat membantu
Le tue sougne sono diventste bianchissime. Usi acqua soeciale 😅
Try hot water dip
Effective in black only. Not effective with colored cartridge
for the pain we are going through to fix this toner.. just go buy one new lol... it doesn't cost you a fortune..
Der Drucker wird die Fehlermeldung 204 anzeigen
bhai apne toh pura dho dala
Anybody Don't do this process, i lost my working cartridge by this process.
Use hot soldering iron.
Cut upper cover. Pull sponge clean and refill.
It will work.
But don't vibrate them.
It,s printed bus bar is very thin.
It will dammage when u try with knife and hammer.
Thank you
Wait, where is this hot soldering iron comes to play?
After 5:44 put the dust bin
😂😂😂 👍
Water, really? 😒
Ganda kaam
do like that for what??
NOT ADVICESABLE NOT WORK IT. :(
Don't try this method, I had to change my new print head after watching this video.
Beli baru 😂😂😂
Buang masa je
Just buy new one
Don't take of the couver if you do you killed him. You should have deleted this video.
gx ada hasil tes
Menyesatkan bro......
Bro washing the cartridge
You’re doing way too much
Please buy a new cartridge
이 미친 잉 크먹지마 몸에 아주 나쁘다. 저정도 문제는 새 카트리지 비품 사는게 낫다
How? Just do not buy these scam ink-cartridge printers.
Usaha yang Tidak berguna
Just buy a new cartridge
just a content
Yeah, I tried it and I bought a new one.
เสียเวลา เปล่า
Anything in UA-cam is not working
कलर कार्ट्रिज को भी साफ करके दिखाए
GET RID OF THAT GODAWFUL NOISE THAT PLAYS DURING THE VIDEO.
DO YOU HONESTLY THINK THAT ANYONE WANTS TO HEAR IT.
résultat , cartouche HS 👎👎👎👎🤡🤡
Loss namagana Guldu Nana maga