This is THE most comprehensive video that I have seen for 8550 conversion, and I've watched so many of them that my head spins. Shout out to you Hangry Muscle! UPDATE: One thing that I need to make clear to everyone, though! I tried this right out of the box, and here is my conclusion: You CANNOT do this right out of the box. You must first install your printer and go through the set-up process. The reason for this: If you take off the rollers and the tray and then install your printer, it will NOT be able to do a proper set-up, test page etc. without the rollers and the tray. You can however put in the DTF ink when the set-up tells you to put in your ink. Once you get it installed and set up, then you can take off the roller and tray. Happy DTF'ing everyone!
I got this printer with the intent of doing sublimation. While getting ready I found this video. I think the dtf will be better for what my intent is. So glad I found this.
How’s is going for you so far? I’m thinking about purchasing one of these printers and doing like the video. I was wondering if the prints also look good on black shirts since that’s what I’ll be working on most
This tutorial with the CISS kit- was EXACTLY what I was looking for. I have been dealing with a clogged line on my second white ink for months now- the kit, and the tutorial has solved EVERYTHING. I just printed out the same projects I was having issues with, and i am so excited!! This tutorial was so easy and the kit was amazing. thank you so much!
Kayla, I’m so excited for you! Clogged lines can be a huge frustration, so I’m glad the tutorial and kit were the fix you needed. Thanks for the awesome feedback!
Best video I have seen very informative and explained your steps very well. I have a question what are the measurements of the exit tray tile you are using and where can I purchase it from?
Soo new to this and nervous to open and start concerting😊😆 BUT I need to do it. I'm afraid it will be hard... but I'm going to follow your video step by step!
Because many people are attempting to "copy and paste" a skill instead of learning what and how things actually work. All Problems are causee by the user, The printer didn't set it self up, nor is it in charge of maintaining itself.
That is the most thorough video I have seen. Not everyone is so generous in sharing. Does anyone know what the clear solution was he put in the tanks. Does the ink come with the CISS and if not, what are you using? Just fyi, I found the link to the ink in the description.
Great video! Thank you for sharing this information. I’m so glad I found it. I was about to purchase the ET-8550 to covert it to a sublimation printer. This video has changed my mind. Can you please tell me why you are using external ink dispensers instead of the ones in the printer? Thanks. I appreciate you!
Soft and breathable, they shouldn't have much of a feel when done correctly.Mine feel like they are part of the shirt. The plastic feel transfers is because people are using way too much DTF ink.
Great video but one thing im unsure of, in other peoples videos they strip off the sides to remove the rollers and mention removing a spring attached under the metal bar on the left, the on with the single screw that you remove to lift the rollers, does the spring stay put while you lift it, worried about it coming off and landing on the mother board. Cheers
How come I read somewhere that the et-8550 has a DTF mode that changes heights of rollers and such and doesn’t require removing stuff from the printer? Did they suggest wrong?
Hi, What size is the tile you used for outfeed? I want to cut acrylic close to the size for this printer outfeed. Which version of the RIP software do you use? Full or DTF?
Hi there thanks for this video it's very helpful, I just bought this printer and will be working DTF and was wondering if it's possible to use the printer as well with regular ink with it's own system by plugin back the ink tubes to the head, then just clean the head every time I switch (and one question why you didn't filled with that other ink direct to the printer?)
Hi!! Thanks for this tutorial! Couple of questions:. I converted an epson for sublimation and have been making tumblers, shirts, etc. I also have been using the dtf hack using my sublimation printer. What is the difference in me using my sublimation printer or converting another printer and using dtf inks? Also, what is the heat pad you usec for curing your designs? Thank you!!!
@hangrymuscle hey, thank you for the tutorial! I have a question - how do I tell the printer that I have replaced the pink inks with white ones? Or does the RIP software prompts for that/automatically kind of knows, which ink is where?
Great video. Question. Since you did not use the ink tanks and went with the external CISS instead. Are you able to switch to maybe sublimation or regular printing by using the actual ink tanks by unplugging the CISS? Just a thought since the ink tanks in the printer were not used. Thank you.
Hello, Im looking into getting this printer. I have a few questions if you wouldnt mind answering, would be greatly appreciated. What electric stirrer would you recommend for the white ink and from where? What is your printer settings on laptop when you are printing DTF? Is there a particular brand of ink, powder, and film you suggest? And I found Cadlink software, supposed to be full version on Etsy... its like 15 dollars... they said its the full version.... do you know anything about that? Kinda scared about it since everywhere else Cadlink is NOT cheap by far. Thank you!
Thank you!! I had an L1800 I bought a few years ago already converted, but am going to convert an 8550 myself. I have EKPrint studio for the rip software, but can't figure out if it'll work with the 8550. Do you know? Hoping I don't have to purchase another rip software.
Hangry I have seen some folks have added a roll print option to the ET 8550. Have you done that yet? I’d love to see how that is added and what you need to do with the software to make that happen.
Hello. I've been hooked on your videos since I stumbled upon them. Great content!! I converted my Epson 8550 printer to DTF, but my blue designs are printing purple. I'm using Cadlink software. Would it be the ICC profile set on the printer that's causing this error? Or is it coming from the profile that's set in Cadlink?
They no longer sell it, I upgraded this DTF oven its much better, only takes me a couple minutes to cure now. aaprintsupplyco.com/products/phoenix-air-16x20-curing-oven?_pos=7&_sid=4b55c9136&_ss=r&ref=hangrymuscle
Just got my et 8550 just did the conversion waiting on my other supplies to come in but I was curious if it’s easier to use the tanks on board or if its better to use a big tank ciss system?
I would need to see an example, to tell you for sure. Common causes for Flooding can be caused by your rip settings (too much ink), printing on the wrong side of the film, or the ciss being setup incorrectly.
Also have one other question... I have epson et 15000 now. I have been using it for several months printing DTF without any issues. All the sudden it has started smearing blue ink. I have replaced head and the dampers... no luck on fixing it. I have never had rip software that i know of except whatever came with the printer, but i never changed anything when i started doing dtf prints... it has done great up until about a month ago and have been trying to figure out what the problem is every since. Thank you
No shaking and circulating the ink does not prevent the ink residue from bulding up and clogging, the best way is to flush the system out with a DTF cleaner that breaks down the DTF ink residue. aaprintsupplyco.com/products/color-max-cleaning-solution-1kg?ref=hangrymuscle
@HANGRYMUSLE I THANK YOU SO MUCH!! I did my conversion last night following your video. I do need understanding how to get past the alignment issue I am having. Printer wants to align using bottom tray feed I have tried to slide a piece of paper in thru the bottom but it won't feed. woke up this morning to shake printer lol and do nozzle check but again i receive the load bottom tray (drawer 2) What should I do? I do plan on getting that ciss in the near future! Thank you again for all you videos and help!!
this video is amazing!!! thank you for all the info!!! went to purchase ciss system on your website but it’s sold out :( any idea when you will be getting more or where else i can purchase?
Hey, thanks for letting me know it said out of stock, It is fixed now. You can purchase the ciss. hangrymuscle.com/products/universal-6-color-ciss-kit-w-accessories-for-epson-inkjet-printers-et-8550-xp-15000
A brother I’m struggling and dwelling on opening up my Epson 2800 to convert it to DTF do you think it’s still possible for that model? And if so does anybody charge a fee to do it for you in Texas?
How to set the matte paper a3 so that the white part comes out from the back, I still don't know how to do it besides that when I have done it I get the paper with the wet design?
Got a question. All my dtf printers ive had over time as i upgrade them ive notice i alwaya het this weird vertical line at the edge of my prints. Any idea how to fix it so it no longer does that??
Yes the rip software is a key component to printing High-quality products. The rip Gives you more control over the ink, so your prints don't feel like patches, are more durable, correct colors, ability to edit images so they are print ready, etc. Without the printer will not print properly.
DTF is ony for soft products such as shirts, hats, etc. Sublimation can also be used for those items, but sublimation can be used on hard surfaces, but DTF can't
![Die-Cut December [26] Is It Too Early to Make a Valentines Card? [2025/303]](http://i.ytimg.com/vi/HZr236K_HZQ/mqdefault.jpg)
This is THE most comprehensive video that I have seen for 8550 conversion, and I've watched so many of them that my head spins. Shout out to you Hangry Muscle!
UPDATE: One thing that I need to make clear to everyone, though! I tried this right out of the box, and here is my conclusion: You CANNOT do this right out of the box. You must first install your printer and go through the set-up process. The reason for this: If you take off the rollers and the tray and then install your printer, it will NOT be able to do a proper set-up, test page etc. without the rollers and the tray. You can however put in the DTF ink when the set-up tells you to put in your ink. Once you get it installed and set up, then you can take off the roller and tray. Happy DTF'ing everyone!
Did you have an issue when you followed the video when this occurred? If so, how did you fix the problem?
I haven't had an issue converting these right out the box.
@@HangryMuscle hey brother what brand or where did you get your placement guide? looks good quality and I really need one. Cheers brother
@SV-ShadyKing amzn.to/3KBNQKv
@@HangryMuscle Thank you brother
I got this printer with the intent of doing sublimation. While getting ready I found this video. I think the dtf will be better for what my intent is. So glad I found this.
How’s is going for you so far? I’m thinking about purchasing one of these printers and doing like the video. I was wondering if the prints also look good on black shirts since that’s what I’ll be working on most
This tutorial with the CISS kit- was EXACTLY what I was looking for. I have been dealing with a clogged line on my second white ink for months now- the kit, and the tutorial has solved EVERYTHING. I just printed out the same projects I was having issues with, and i am so excited!! This tutorial was so easy and the kit was amazing. thank you so much!
Kayla, I’m so excited for you! Clogged lines can be a huge frustration, so I’m glad the tutorial and kit were the fix you needed. Thanks for the awesome feedback!
I’m so glad I found your video. I was struggling getting that roller piece out. Just the video I needed! Thank you so much!!!! 🎉
You're very welcome. Stay Hangry 💪🏾
Not going to lie I have a commercial dtf and this one looks good bro
That's why its my favorite printer
@@HangryMuscle hell yea I’m about to get one
Best video I have seen very informative and explained your steps very well. I have a question what are the measurements of the exit tray tile you are using and where can I purchase it from?
Thank you for the feedback!
ua-cam.com/video/2xseQTHSqEQ/v-deo.html
Soo new to this and nervous to open and start concerting😊😆 BUT I need to do it. I'm afraid it will be hard... but I'm going to follow your video step by step!
How did it work out for you? I just got mine and I’m so nervous! I see tons of people saying their ink isn’t working or something went wrong…
Because many people are attempting to "copy and paste" a skill instead of learning what and how things actually work.
All Problems are causee by the user, The printer didn't set it self up, nor is it in charge of maintaining itself.
@@HangryMuscle this is the way!
just picked up my Epson 8550 today!
Congrats! 💪🏾
Hey, can you do a tutorial on setting up the CADLINK Software settings please?
YES
Merry Christmas ua-cam.com/video/DQ4mDmZo5Zs/v-deo.html
Cadlink setup ua-cam.com/video/DQ4mDmZo5Zs/v-deo.html
great video! how's it holding up?
Forgive me if I missed it.... but why do I need an external Ciss and not just use the one that's already in the printer?
to print the white ink
Its not to print white ink. Using a external ciss makes it easier maintain the ink and printer.
@@HangryMuscleoops okay thank you !
Love your videos bro ! How many prints you think these things can last ? A year ?
That is the most thorough video I have seen. Not everyone is so generous in sharing. Does anyone know what the clear solution was he put in the tanks. Does the ink come with the CISS and if not, what are you using?
Just fyi, I found the link to the ink in the description.
Am glad he did a follow up to the last video. ❤ marvelous vid bro!
I just bought this printer as well waiting for my CISS kit due to the white DTF. Hopefully I can make it work!
Looking good Hungry!!! Thank you for this video, very helpful! ❤
Thank you Thermo, appreciate you watching 🙏
Great video! Thank you for sharing this information. I’m so glad I found it. I was about to purchase the ET-8550 to covert it to a sublimation printer. This video has changed my mind. Can you please tell me why you are using external ink dispensers instead of the ones in the printer? Thanks. I appreciate you!
You have to have someone c different inks and it must be DTf ink
if i wanted to print directly from kittl could i or no ?
you could but your colors would be incorrect and there would not be enough ink for the powder to work.
Soft and breathable, they shouldn't have much of a feel when done correctly.Mine feel like they are part of the shirt.
The plastic feel transfers is because people are using way too much DTF ink.
Great video but one thing im unsure of, in other peoples videos they strip off the sides to remove the rollers and mention removing a spring attached under the metal bar on the left, the on with the single screw that you remove to lift the rollers, does the spring stay put while you lift it, worried about it coming off and landing on the mother board. Cheers
Anyone know the answer to this before I start to convert?
Same looking for a response
It stays attached with rollers and taking off the side would expose the motherboard. The way I showed is the easiest way.
no do not take on sides
how much is the dtf software and do you have to have it ?
Yes
dtgpro.com/cicproduct/cadlink11.php?afl=3277
is there a cheaper alternative i purchased the printer ink and paper but i didnt realize the software was that much lol
what type of heat mat do you use for curing?
Thank you so much! You are a life saver. Now i can resume printing my research paper ❤
Your the goat for this bro thanks
Appreciate that! Glad the video helped.
How come I read somewhere that the et-8550 has a DTF mode that changes heights of rollers and such and doesn’t require removing stuff from the printer? Did they suggest wrong?
Hi, What size is the tile you used for outfeed? I want to cut acrylic close to the size for this printer outfeed. Which version of the RIP software do you use? Full or DTF?
Thanks, my 2nd 8550 will be here tomorrow...your video makes me feel confident I can do this...did you get the ceramic tile cut to that size?
Hi! Love the video. How big will this printer print?
I just purchased my Epson 8550 and I’m loving it. What is the largest size dimension have you been able to print on your converted Epson 8550.
Hello have you had any problems with your printer and is it converted to Dtf
How well did the first one hold up? Is this easier to use than buying one that is set up for DTF? I'm only going to be printing for personal use
Hi there thanks for this video it's very helpful, I just bought this printer and will be working DTF and was wondering if it's possible to use the printer as well with regular ink with it's own system by plugin back the ink tubes to the head, then just clean the head every time I switch (and one question why you didn't filled with that other ink direct to the printer?)
I just asked the same question above. Following, because wouldn't it make sense since it is not being used.
Hi!! Thanks for this tutorial! Couple of questions:. I converted an epson for sublimation and have been making tumblers, shirts, etc. I also have been using the dtf hack using my sublimation printer. What is the difference in me using my sublimation printer or converting another printer and using dtf inks?
Also, what is the heat pad you usec for curing your designs?
Thank you!!!
Sublimation hack does not print white this printer has 2 additional color slots to add white. I’m assuming you also have to stick to light colors
Great great video! I wished it was a XP 15000 though that you were demonstrating. Love all the designs also.
Thank you so much this tutorial was really great😊 i am so glad i came across your video
Happy to help, this is the new tutorial to help with printer settings for colors and other issues. ua-cam.com/video/DQ4mDmZo5Zs/v-deo.html
Question!! Can you put the rollers back in??
Yes you could
Best video ever! Thanks for sharing 🙏🏽
I finally converted my printer thank you so much, but I’m running into an issue when printing how do I get the white to cover over the color image.
You need dtf software
When converting the epson 8550 to dft do you have to install the ciss
When converting the epson 8550 do you have to install a ciss ?
I wasn't wondering the same thing cuz I've seen other videos and the don't do that
So is printer's head already set for the colors to print in a certain order
I think I’m gonna attempt this do you have a link for the ciss tank ?
Great video, where did you get your heat mat or a link? Thanks
dtgpro.com/cicproduct/dtf-pro-heatstation.php?afl=3277
What thickness is the tile you use in the exit tray please
Not sure, you can find the tile at home depot, its the standard sample tiles 12x24
Where did you get the exit tray and what are the dimensions?
ua-cam.com/video/2xseQTHSqEQ/v-deo.html
@hangrymuscle hey, thank you for the tutorial! I have a question - how do I tell the printer that I have replaced the pink inks with white ones? Or does the RIP software prompts for that/automatically kind of knows, which ink is where?
Hi Raikok, the rip software will be used to set the new ink order/color.
Great video. Question. Since you did not use the ink tanks and went with the external CISS instead. Are you able to switch to maybe sublimation or regular printing by using the actual ink tanks by unplugging the CISS? Just a thought since the ink tanks in the printer were not used. Thank you.
Hello, Im looking into getting this printer. I have a few questions if you wouldnt mind answering, would be greatly appreciated. What electric stirrer would you recommend for the white ink and from where? What is your printer settings on laptop when you are printing DTF? Is there a particular brand of ink, powder, and film you suggest? And I found Cadlink software, supposed to be full version on Etsy... its like 15 dollars... they said its the full version.... do you know anything about that? Kinda scared about it since everywhere else Cadlink is NOT cheap by far. Thank you!
Can i use the original eco tank ?
Hi Ty for sharing your knowledge just wondering what ink can you use for dtf on this video
Thank you!! I had an L1800 I bought a few years ago already converted, but am going to convert an 8550 myself. I have EKPrint studio for the rip software, but can't figure out if it'll work with the 8550. Do you know? Hoping I don't have to purchase another rip software.
What temperature is your warming mat that you use to set the glue?
150C
Do you have to take out exit tray?
Hangry I have seen some folks have added a roll print option to the ET 8550. Have you done that yet? I’d love to see how that is added and what you need to do with the software to make that happen.
I will add Hangry your videos are absolutely fantastic and I will converting one of these this week. Can’t wait!
Hello. I've been hooked on your videos since I stumbled upon them. Great content!! I converted my Epson 8550 printer to DTF, but my blue designs are printing purple. I'm using Cadlink software. Would it be the ICC profile set on the printer that's causing this error? Or is it coming from the profile that's set in Cadlink?
excellent video friend, thank you very much... can you send me the link to the video of the maintenance box
Can I ask what’s the feel of the transfer? Some feel very plastic. Thank you in advanc!
Excellent video thank you!
Glad I could help
It there an dtf shaker compatible with the Epson 8550?
Hey do you have a link for the heating mat?
They no longer sell it, I upgraded this DTF oven its much better, only takes me a couple minutes to cure now. aaprintsupplyco.com/products/phoenix-air-16x20-curing-oven?_pos=7&_sid=4b55c9136&_ss=r&ref=hangrymuscle
Just got my et 8550 just did the conversion waiting on my other supplies to come in but I was curious if it’s easier to use the tanks on board or if its better to use a big tank ciss system?
How do you minimize the ink flooding the print head on the ET8550?
I would need to see an example, to tell you for sure. Common causes for Flooding can be caused by your rip settings (too much ink), printing on the wrong side of the film, or the ciss being setup incorrectly.
Liked and subscribed, could I ask, which version of cadlink are you using for the 8550? I'm hoping to use 10, any tips on setting it up? Tha k you
I use both 10 and 11 here are my settings ua-cam.com/video/DQ4mDmZo5Zs/v-deo.html
Great video, can you tell me if the Epson EcoTank L8150 is the same printer. Can not find the ET-8550 in SA thanks
Yes, its the same just black
Thanks@@HangryMuscle
Also have one other question... I have epson et 15000 now. I have been using it for several months printing DTF without any issues. All the sudden it has started smearing blue ink. I have replaced head and the dampers... no luck on fixing it. I have never had rip software that i know of except whatever came with the printer, but i never changed anything when i started doing dtf prints... it has done great up until about a month ago and have been trying to figure out what the problem is every since. Thank you
Where did you get the ciss ink system from
Its sold out I'll have more in about a week
Could the chip be removed from the waste tank?
Yes
how do you keep/ stir the white ink?
It is shown in the video
I had a spring fall out when I removed rollers is that needed?
Hi if its spring that holds the rollers, its not needed.
Like how many minutes would you say to cure it?
Hey nice Video! Where did you get your ciss from? The ones I keep seeing are for other epson printers.
can i switch to a ciss system if i've already filled it with the ink? delivery time is two weeks out for one
Yes you can
@@HangryMuscle Thanks, i should have finished watching before I asked lol, If you don't mind me asking where did you get the PumpKing design?
What to do if the white ink coating isn’t printing over it?
Do you sell the this by any chance already converted. ? I see people selling on Etsy but the older model..
No I don't anymore, but I walkthrough and train you how to use it properly through zoom or in person depending on your location.
Do you need a ciss or can you just addd the dtf to the tanks on the printer ?
You can also just add the ink to the printer
Will this also work for Epson l8050
Yes
Can this printer be used with any RIP Software? I will be using EK Print. Thank you for your time!
Do I need to setup my printer before i start taking the rollers and stuff out ? Inwant tontry to convert mines tomorrow and wanted to make sure
I did
Hmm I wonder if I can make a tank shaker 🤔 do you think that would help the ink from not clogging ?
No shaking and circulating the ink does not prevent the ink residue from bulding up and clogging, the best way is to flush the system out with a DTF cleaner that breaks down the DTF ink residue.
aaprintsupplyco.com/products/color-max-cleaning-solution-1kg?ref=hangrymuscle
Hi,
Do you have a video on what version of Cadlink and what CISS do you use? Where to get quality inks?
Check the description, everything is listed
@@HangryMuscle thought I did. Thank you
This was not meant as sarcasm. I honestly read the descritption and did not see until after I asked.
What software do you need to purchase? There’s several options ranging from $200 to $500
Where did you purchase your heat mat to cure design?
dtgpro.com/cicproduct/dtf-pro-heatstation.php?afl=3277
I have this printer with inkjet ink in it. Can I remove and clean it to change to DTF
What size tile did you use
12×24
You sell convert printers?
Where do you recommend buying the ciss?
I have a link posted in the video description. Amazon, ebay, aliexpress
What RIP software are people using with this for DTF printing please?
dtgpro.com/cicproduct/cadlink11.php?afl=3277
@HANGRYMUSLE I THANK YOU SO MUCH!! I did my conversion last night following your video. I do need understanding how to get past the alignment issue I am having. Printer wants to align using bottom tray feed I have tried to slide a piece of paper in thru the bottom but it won't feed. woke up this morning to shake printer lol and do nozzle check but again i receive the load bottom tray (drawer 2) What should I do? I do plan on getting that ciss in the near future! Thank you again for all you videos and help!!
To do an alignment,put in the bottom paper tray (cassette 2) or feed the paper through the rear feed (slot) in the back of printer.
Is this printer better then the Epson P600 and P800 that everyone is saying to use for dtf prints? Which is more vibrant?
Where did you get the tile? What size? How thick?
ua-cam.com/video/2xseQTHSqEQ/v-deo.html
this video is amazing!!! thank you for all the info!!! went to purchase ciss system on your website but it’s sold out :( any idea when you will be getting more or where else i can purchase?
Hey, thanks for letting me know it said out of stock, It is fixed now. You can purchase the ciss.
hangrymuscle.com/products/universal-6-color-ciss-kit-w-accessories-for-epson-inkjet-printers-et-8550-xp-15000
Where did you get your heat matt
dtgpro.com/cicproduct/dtf-pro-heatstation.php?afl=3277
Discount code: hangry
I'm using a converted XP-15000 with chipless cartridges, I get clogs so much, will this printer clog less ?
Do I have to remove the maintenance box it comes with because
No
A brother I’m struggling and dwelling on opening up my Epson 2800 to convert it to DTF do you think it’s still possible for that model? And if so does anybody charge a fee to do it for you in Texas?
How to set the matte paper a3 so that the white part comes out from the back, I still don't know how to do it besides that when I have done it I get the paper with the wet design?
Where do I purchase the ciss kit
I have it available here on my website.
hangrymuscle.com/products/universal-6-color-ciss-kit-w-accessories-for-epson-inkjet-printers-et-8550-xp-15000
Any updates on clogging?
Not sure, I don't deal with clogs.
I have this printer that I used for sublimation.. how would I empty the sub ink and put the dtf ink in?
Check the channel
Got a question. All my dtf printers ive had over time as i upgrade them ive notice i alwaya het this weird vertical line at the edge of my prints. Any idea how to fix it so it no longer does that??
Do you have to use a software like Rip or CADlink? Is there no other way to designate the order of the color of inks within the Epson settings?
Yes the rip software is a key component to printing High-quality products. The rip
Gives you more control over the ink, so your prints don't feel like patches, are more durable, correct colors, ability to edit images so they are print ready, etc.
Without the printer will not print properly.
@@HangryMuscle Thank you.
Dont know much aboit dtf but can you make the 16oz snowglobe wraps with this printer
DTF is ony for soft products such as shirts, hats, etc. Sublimation can also be used for those items, but sublimation can be used on hard surfaces, but DTF can't