Mahindra 1626 not starting on cold morning WATCH THIS. This could be the problem
Вставка
- Опубліковано 13 жов 2022
- Mahindra 1626 simple fix to not starting on cold days.
Glow Plug issue in Mahindra 1626.
Diesel tractors want start on cold mornings.
Mahindra tractor cold starting issues.
#mahindra #mahindratractors #mahindra1626
AMAZON AFFILIATE LINKS:
ZTUOAUMA 5X Fuel Filter 6A320-59930 PF9911 31A62-00317 with O-Rings
amzn.to/3N80As7
Replacement Turn Signal for Mahindra 1626 / Peterson Manufacturing V313AA Turn Signal Light, black amzn.to/3itraOg
Please see my home page and click the COMMUNITY TAB / PAGE to see all Amazon Affiliate Links.
*DISCLAIMER*
WHEN USING ANY OF MY AFFILIATE LINKS I GET A SMALL COMMISION AT NO COST TO YOU.
Thank you very much for watching & following Poorboys' Little Homestead / Papaw's Place. Every time you Like, Share, Comment, & Subscribe, you are being a tremendous help to this homestead. So Thanks Again and God Bless.
Website: www.poorboyslittlehomestead.com
*ALL MY MUSIC is by a friend and/or myself **
Contact : If you would like to mail something or just
reach out to Poorboys' Little Homestead / Papaw's Place
Email: poorboyslittlehomestead34-99cr@yahoo.com
If you would like to help / support Poorboys' Little Homestead you can do so via: paypal.me/Poorboy51 anything is greatly appreciated.
*DISCLAIMERS*
1) When using any of my affiliate links I get a small commission at no cost to you.
2) Anything you see me doing, Advice and/or information given is not professional advice and should be acted on at the user’s own risk.
Thanks and God Bless! - Фільми й анімація
I believe you just fixed my 1526, thank you for your knowledge and time to put this video online, much appreciated!
Glad to be of help. Thanks for the comment.
Had that problem with my tractor for years. Thanks a lot, that's a big help.I have a Mahindra 1526. Same engine and set up the same way.
Glad to be of help my friend. Thank you much for commenting!
Thanks for this info! My 1626 only has 20 hours on it, but now I have “what if” info.
Never know what may happen in the future.
Thanks for commenting.
keep the mahindra vids coming poorboy much appreciated
Thank you much!
Hey thank you so much !!! Ive been working on my 2013 Mahindra 3016 and this is the first problem ive ever had since bought new, the last couple days it would crank and put out black smoke, Ive been going through every thing electrical and nothing it would try to start but would not. so I got on UA-cam and you was the first Video I got on thank you so much sure enough I went out and easy tighten the nuts like you said first I tried the tester and the light came on and went off but I snugged the nuts down and she fired right up thank you so very much thats when I Subscribed to your channel you save my butt and probably saved me a ton of money .
You're welcome, I'm glad you found it and saved yourself a lot of time and money. Thanks for the sub. Drop in anytime I do all types of videos.
This is happening to my 1626 shuttle shift. It's turning over letting smoke nothing. Watched this she fired up as soon as I cleaned up plate between glow plugs and lightly tightened back up keeping aluminum plate in mind. Thanks helped me in a pinch. First couple cold mornings in Arkansas came in November unusually almost for us, but needed tractor and this helped thank you so much!
Glad it helped my friend. Thanks for commenting. God Bless!
Thanks Papaw! This vid was a huge help with my 1526 that wouldn't start.
Hello Benjamin, your welcome. Was that the problem on yours also?
Got a 1636 will keep a eye on it . Just have 10 hours on mine so far. Great video.
Thank you Mr. James.
Great video ! Thanks for the help. It's nice to fix problems at home and avoid dealerships.
Thank you Mr. Chris, I agree, I try to do everything I can myself.
Thank you very much for your video , it was helpful in regards to what is causing the glow plugs in my 1526 not to heat up. In my case am getting no fire through the wire going to the glow plugs. On my way out the door to check the connections on the glow plug control box. Your video is more helpful than all the others that I have sat through.
Please update us on what you figure out so it will help others in the future. Thanks for your time.
Great video! Thank you, Sir.
Thank you much!
Thanks man. Helpful video.
Glad to be of help and thank you for commenting.
Thank you for the informative video!!!... was a great help!
You're welcome and thank you for commenting. God Bless!
Thanks for the video Pawpaw!! We recently had night time temps in the teens and 20's in Brookside Village, Tx. so I wanted to make sure and run the tractor to keep the battery charged. Out of the blue, all it would do is spew blue diesel smoke. I finally got it started, but sounded real nasty in doing so. Then I watched your video, tested the forward glow plug and no power. I lightly tightened them and wiggled connections and bam, started right up!! Would have been a pain to move it and get it on the trailer without power!! Thank you Sir!! Liked and Subbed... Mine is a 2018 1626.
Glad to be of help my friend. If you come across other issues with this tractor that I should be aware of please advise. Thanks for the Sub and God Bless!
Thanks for sharing!
YW and thank you for commenting.
Thanks a lot fun things can happen!
Glad to be of help.
thanks for commenting.
Great job heeehaw
Thank Ya!
I'm glad you mentioned about the washers. I was thinking the same thing. Putting a washer on should help avoid it spreading out when you tighten it. Good post!
Yes sir, I used star washers, and everything seems to be holding good so far.
Morning bud , I was wondering.. sometimes I have a problem cranking on a cold morning , any test for not wanting to get out of a warm BED ? 😂…….. good video though !
My Bill, sometimes my glow plugs don't work on them cold mornings also. 🤣
7:17 I need to know if that wire has a full 12V going to the glow plugs.
Just went and checked it with a muti-meter and mine show 10.30 volts
Have you had any issue where the negative grounds to the frame?
I haven't at this point.
I was thinking about getting a 1626 but the electronic governor was the deal breaker.
Ever tractor I looked at had something I didn't like about them, but I've been happy with this one so far.
I have a 1626. I replaced the bar and controller box but i still have no power to the plug at the bar. Any suggestions?
I don't but please update us on what you find out so it will help others in the future. Thank you!
You got your tires weighted up
I just run air no water.
Glow plug controller relay also $150
I figured it was pricy.
Boo just priced a mahindra glow plug 150 bucks ✨️ 😍 one plug
You can get off brand cheaper than that.
@@papawsplace hope zo bro
If your tractor is still under warranty, let the dealer fix it. It is ashamed that you have to have this problem with such a new tractor.
I agree, BUT it would cost me more money and time to take it to the dealer for something this simple to fix. I'm 35 miles from the dealer.
Weee Doggy this video was a big hep to me and my kinfolk, seriously it helped me fix my no starting issue thanks
Glad to be of help my friend.