I have 2 of Andy's kits going to the rear of my 1626 for top and tilt. All hoses are pre-assembled on the valve for easy installation. Andy also supplied both cylinders. By far the easiest and most reliable remotes I've used.
Would be nice if it came with the grapple for $595. Then again we are not in 1965. Your kit is simple but functional and priced right. As soon as I convince my wife why we need a grapple, I will be ordering a kit from you.
Have been thinking about solenoid activated front remotes but this might do what I'm looking for. Easier to install for sure and lower cost plus no piecing parts together. Now just gotta find money for the grapple LOL
Wonder if this will work with the new quick connect system? How would it attach? I'm getting a new 1626 and this system is more affordable than the OEM kit.
Yes, I have two versions of the kit - this classic one, and an updated one for tractors 2023 and after. If you have any doubt, send me a picture of your couplers and I'll make sure you get the right kit. My phone number and email are on the website. www.tractorinnovations.com
Yes, the valve will mount to the footguard. Send me pictures of your couplers so I can make sure it is built correctly. My phone number and email are on the website. www.tractorinnovations.com
I do! I can do live remoted run from the power beyond port of your loader valve. I don't have as many tractors dialed on on that kit yet, but contract me and we'll see what i can do for you. www.tractorinnovations.com/powerbeyond
Hi, Andy. I have a Mahindra 5010 HST Cab. I’d like to run a grapple with it, and maybe some rear implements. Is it the same kit as this one, just with different hose lengths, or something different. Likewise, I don’t see the typical handle selector as part or your kit. Am I just overlooking it? Thanks!
I have a video of cab installation on a Kubota. The Mahindra cabs don't make it easy, and every one I've done has been a 1-off. I can help you, but it takes some leg work getting the hose lengths and figuring out mounting. Cab install video: ua-cam.com/video/3VKGqHHJi7E/v-deo.html
I have a Mahindra E350 -DI and I would like to know can I mount a front-end bucket oh my tractor all it has is a three point hitch in the back I cannot find any information on one
Yes, this works great on TYM tractors. I'll just have you send me picture of your loader control handle, and one of your quick-couplers disconnected, with a good view of the male coupler fitting. With that, I can build it for any tractor.
I have 2 of Andy's kits going to the rear of my 1626 for top and tilt. All hoses are pre-assembled on the valve for easy installation. Andy also supplied both cylinders. By far the easiest and most reliable remotes I've used.
Would be nice if it came with the grapple for $595. Then again we are not in 1965. Your kit is simple but functional and priced right. As soon as I convince my wife why we need a grapple, I will be ordering a kit from you.
Love the kit I got from you for my Mahindra 1626. I already had the third function. Install was a piece of cake
Have been thinking about solenoid activated front remotes but this might do what I'm looking for.
Easier to install for sure and lower cost plus no piecing parts together.
Now just gotta find money for the grapple LOL
Wonder if this will work with the new quick connect system? How would it attach? I'm getting a new 1626 and this system is more affordable than the OEM kit.
Yes, I have two versions of the kit - this classic one, and an updated one for tractors 2023 and after. If you have any doubt, send me a picture of your couplers and I'll make sure you get the right kit. My phone number and email are on the website. www.tractorinnovations.com
Do you build a kit for a 6065 mahindra?
Yes, the valve will mount to the footguard. Send me pictures of your couplers so I can make sure it is built correctly. My phone number and email are on the website. www.tractorinnovations.com
This was awesome
Rather than a push pull knob do you have a handle or lever type control. Thanks
I do! I can do live remoted run from the power beyond port of your loader valve. I don't have as many tractors dialed on on that kit yet, but contract me and we'll see what i can do for you.
www.tractorinnovations.com/powerbeyond
How can I get in contact with you
@@zaheerkarim9939 tractorinnovations@gmail.com
I have a Mahindra 1626 hydro, i would love to have a top/tilt for the box. Do you have a kit for this?
A video would be AWESOME!
Yes, I do double kits all the time. You can have 2 diverters, and you're able to activate either one or both at any given time.
@@TractorInnovations
Any chance for a video in the near future?
Do you have a system for an auxiliary for the front, say for a grappler. Would the setup be the same
Hi, Andy. I have a Mahindra 5010 HST Cab. I’d like to run a grapple with it, and maybe some rear implements. Is it the same kit as this one, just with different hose lengths, or something different. Likewise, I don’t see the typical handle selector as part or your kit. Am I just overlooking it? Thanks!
Ignore that last question - I watched the video to the end. But how to mount that with a cab?
I have a video of cab installation on a Kubota. The Mahindra cabs don't make it easy, and every one I've done has been a 1-off. I can help you, but it takes some leg work getting the hose lengths and figuring out mounting.
Cab install video:
ua-cam.com/video/3VKGqHHJi7E/v-deo.html
I have a Mahindra E350 -DI and I would like to know can I mount a front-end bucket oh my tractor all it has is a three point hitch in the back I cannot find any information on one
Sorry, everything I build I based off of your tractor already having a loader installed.
Can have a kit for a TYM T254 ?
Yes, this works great on TYM tractors. I'll just have you send me picture of your loader control handle, and one of your quick-couplers disconnected, with a good view of the male coupler fitting. With that, I can build it for any tractor.