I BROKE MY TRACTOR! MAHINDRA 3016 PROBLEMS
Вставка
- Опубліковано 20 лют 2022
- Please Like 👍, Comment, & SUBSCRIBE! ✔️
Camera Tripod. amzn.to/2I0cQP2
Phone Mount for Tripod. amzn.to/2I8XkQw
The best sun hat ever. amzn.to/3gv5AX9
Minnow Trap. amzn.to/3lbjalr
WORX Trivac 3-in-1. amzn.to/2I9J3n5
Irwin Quick Grip Clamps. amzn.to/2IaklTh
**Purchasing through these amazon affiliate links won’t cost you any extra but it might put a little change in our pocket.
Thanks for your support!
P.O. Box 141
Mooreville, MS 38857
I really like my 3016. Mine is an HST which is a real advantage with my beat up old body. It is a 2013 with 780 hours on it. The only issue that I have had with it was a corroded connector that causes it not to crank. I called my dealer and he immediately told me what to check I cleaned the connector and it fired right up. Sorry you had the problem but glad you got it resolved.
I am having similar problem on my 1526. Guess this something that the dealer will have take care of....uggggg but atleast I have an idea. Like you I have been able to find anything on line. Thank you for posting this!!!
I'm no expert on the mahindra 3016 but I've had two of them torn apart and installed new clutch pressure plate bearings etc. On BOTH the cluch was still usable the PROBLEM was rusted up throw out bearing arm. You you see when he's up order there that silver zinc costed linkage rod.? If you see it bowing when you disengaging the clutch it's probably not the clutch as much as the throw out bearing arm and when you think your pushing in the clutch actually its that linkage rod bowing up. Save yourself $800 plus by first checking that before buying a clutch kit
Gear selector linkage under the seat on my 3016 get bound up sometimes. Take a screw driver move the linkage back in place. Otherwise been a great tractor. 340 hrs
I’m excited about the fruit trees! Love your updates.🎈
I bought one new ! Never ever will i buy another mahindra tractor. Junk from the start. Had to have the pto fixed twice start issues. over and over . I bought a MF 135 so I would have a tractor that works and it is 53 years old, not new. Just came in from another start issue and found this . Tractor has under 1000 hours.
With only 250 hours on your tractor I'm going to guess it's a loose hose. Good luck and thanks for the video.
The exact same thing happened to mine and like you I couldn't find anything online about it either, ended up taking it in half in my driveway to figure it out. Also, they will tend to get stuckn in 2 gears at once... so I jeep a 3/4 wrench in the left cup holder 🤣
That's a nice tractor. My Kubota gets a little fidgety sometimes. I hope your problems get solved.
I have a 2014 3016 HST, has over 700 hrs, it has been awesome on 10 acres, only issue has been fuel glogging in tank to fuel line plugs up, must be some trash that got in. and now the glow plug doesn't work I guess, have to use starting spray when its cold.
I have struggled with this for a few months (1526 shuttle) and my f/r shaft froze just after replacing the hydraulic/trans oil and filter. Just passed 200 hours (froze at 200.4) and now I need to get it to the shop. I will try the fix you suggest and hope I can unfreeze it. I was looking for a grease fitting there without luck.
I take it that the work was not covered by warranty?
Hello,
Where is the plug ?
Similar experience,, Mahindra Max26, clutch totally blew out, ( Catastrophic failure ) all rusty inside, Rubber plug not removed
I have a larger 2015 Mahindra 2565 Shuttle shift with cab that has a slipping clutch. I have 518 hours and it has been light use. Additionally, the MIS diesel check engine light comes on, that clears after I remove the EGR valve and clean it. I had to replace the EGR valve at $826 improving performance but it still comes on intermittently and then clears. It runs good again after the light clears. I am unclear if there is an emissions problem or fuel rail issue. Has anyone split their tractor to replace clutch, pressure plate, pilot bearing and throughout bearing? I have done plenty of cars and trucks, I am sure I can get this done but would like a little guidance on what to expect.
Where is the plug located?
Enjoyed the video. Would you buy another marinara?
I got exactly the same year and model number with same symptoms
May i ask what year is your Mahindra? We have one and are just curious. Our is not the same model as yours though.