🟠 IMPORTANT UPDATE: Edge Driver Information: This Video is OBSOLETE. I have a post on my website providing updated instructions for installing the Custom Edge Driver. Here is the link to that article: 🔗 How to Install Edge Drivers For the Dome Siren: tinyurl.com/mtvpw3b5
Thank you. I think I've had my Dome Siren for about three years, but just now is the first time it has been successfully attached to my Smartthings Hub. Now I might actually be able to add some automation to my door sensors instead of just "hey Google, what's the temperature of..." :-)
Hello User. I brief search on the SmartThings Community website did not yield any results. I suggest you request a driver via the site. Here are instructions: community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327
@@user-qn5dz4rj2q - You may want to reach out to the SmartThings Community for a possible solution. The members on that forum are very helpful. community.smartthings.com/
Ring currently Does Not Offer an Outdoor Siren in the USA. Has anyone taken a Dome Siren and used the LED or speaker high to drive a relay to drive an analog dry contact for an outdoor siren?
I would suggest you ask this question via the SmartThings Community. Someone in there may be able to suggest a possible work around. community.smartthings.com/
I don't see a QR code to scan. I don't know how.... I set this up last year with my Ring alarm, but now I can't find the QR code! I can't figure out how to change the sound it makes. It doesn't match my alarm sound. Any help?
Hello RGC. The QR code should be inside the battery compartment if I remember correctly. The device requires a custom edge driver. Installation instruction and driver channel link is located in an article on my website. You’ll need to login and purchase my edge, driver package, which includes 30+ driver related articles that provide instructions for installing custom drivers for various SmartThings compatible devices. Here is the link to my website article: tinyurl.com/ye27btra
do you have any videos on using a keypad to arm and disarm smartthings? thank you for making it so simple adt really put it to alot of us with them outdating their hub
Hello Morgan. I have no experience with the ADT setup for SmartThings. But if you have access to the SmartThings App you can manually set "Armed Away" for "Disarm" within the App. If you want a "keypad" or panel that is mounted near your door you could install the SharpTools App on a I-Pad and mount the I-Pad on the wall near your door. You could then use a SharpTools dashboard to turn arm or disarm the SmartThings Home Monitor. Here are a couple of videos on how to setup with SharpTools: ua-cam.com/video/W0pbPZCS4oo/v-deo.html & ua-cam.com/video/sIATC7ghAUs/v-deo.html
This is great, thanks. Any ideas if any update is available to the Dome motion sensors? There used to be some settings (motion or light sensibility) available in Smartthings, now it only reports motion (no light).
You're welcome Sebastian. As for the Dome Motion Sensor (Model: DMMS1), Kevin Laframboise published a device type handler (DTH) for the old ST App, see here: community.smartthings.com/t/release-dome-motion-sensor-official/78092 You may want to read through the post to see if the DTH is functional in the new ST App. Keep Automating!
Not sure. You may post requests for Zigbee Edge Drivers at: community.smartthings.com/t/post-requests-for-zigbee-edge-drivers-here-community-created/262081 You may also check the, "Quick Browse Lists for Edge Drivers": thingsthataresmart.wiki/index.php?title=Quick_Browse_Lists_for_Edge_Drivers
Hi! I have a Ring Alarm system and was interested in adding the Dome alarm- is it only possible to configure the Dome using the methods described in this video? Thanks!
Yes the dome alarm is a Z wave device. So you should be able to add it to your ring alarm system. I would refer to the ring alarm site for instructions on how to add it. Be aware that it will not have all the functionality that is available in smartthings. In other words it’ll only act as a siren.
Absolutely! There is a custom edge driver that was developed by a SmartThings Community Member that works great! I have detailed the steps for downloading and installing the device to your SmartThings or Aeotec hub on my website: www.budshomeautomation.com/post/how-to-install-smartthings-edge-drivers-for-the-dome-siren There is also a link to a youtube video tutorial as well within that same article. Here is my device affiliate link if you should decide to purchase the Dome Siren: amzn.to/45yLrsx Thank you for your support!
Hi, How can fix the delay in the chime? I have setup Dome siren with Smarthings. I setup a routine in conjunction with the multipurpose sensor on my door. But when the door opens, there is a delay in Chime and Siren. How can I fix that?
I had a delay initially but I do not have a delay now. Since this is a Z-Wave device I would try to refresh the links to your Z-Wave device network. This can be accomplished by running your repair Z-Wave network utility in your SmartThings App. Find your Hub in the list of devices. Click on your Hub. Click on the ellipsis (three dots) in the upper right hand corner. Click on Z-Wave utilities. Tap on "Repair Z-Wave network".
Also, many of these delays will go away once ST converts all Device Handers over to the new Edge Drivers. This will cause our devices to work locally from the hub rather than the SmartThings (ST) cloud. :)
Hi Jeff! Thanks for the question. The answer is yes. The developer has converted the Custom Device Handler to an Edge Driver and and it was reviewed and approved by Dome. To Install the Edge Driver for Dome Siren amzn.to/3QWmIGG I recommend that you first read the information provided by the developer, Kevin LaFramboise on the SmartThings Community. That information can be found at the following link: community.smartthings.com/t/release-dome-siren-official-2-0/230204 You then can tap on the developer’s invitation link in the article to the Dome Edge Driver Channel, but I will also provide the invitation link and instructions for installing here: Dome’s Edge Driver Channel: bestow-regional.api.smartthings.com/invite/RPMxr5eQoXlm? Instructions: 1. Click the link above 2. Log in with your Samsung Account 3. Click the “Enroll” button next to your hub 4. Click the “Available Drivers” button 5. Click the “Install” button below Dome Siren 6. Add the device Note: I believe that you must be enrolled in the Edge Beta program to install/enroll the edge drivers via the invitation link. If your SmartThings Hub is not enrolled you can enroll your Edge-compatible Hub in the SmartThings Beta Channel by following the instructions here: developer-preview.smartthings.com/docs/sdks/cli/introduction/
After you pasted the RAW code into the device handler tab "from code", you must tap on the create button. Following that, you must tap on "Publish" and then tap on "For Me". Otherwise the code will not connect to the GitHub Repository and the Device Handler will not be functional. Login to your SmartThings IDE (SmartThings Account), click on the "My Device Handlers" tab, click on the "Dome Siren" Device Handler to bring up the code you pasted, click on "Save", Click on "Publish" and then click on "For Me" then open your SmartThings App and see if all the extra functionality is there. If not, let me know the color of your text for the Dome Siren device handler.
Thanks for all information provided in that video, very helpful! My set up is ST hub v3 + ST app and I've faced a lot of issues during installation process before I found your video online. Did you also change device type from "Z Wave Device" to "dome siren" under ST IDE / Device List / Dome Siren ? After following your recommended process, I can access all siren features, but can't make any change, customization or automation because my siren shows offline in ST app (error message: "A network or server error accrued. Try again later"). I had already replaced batteries, installed, reinstalled, and same issue. all other devices connected to ST Hub work fine. What am I missing?
RE: Did you also change device type from "Z Wave Device" to "dome siren" under ST IDE / Device List / Dome Siren ? Yes. However, because it is a Z-Wave device you must first Exclude it in the ST App before adding it as a new device. To remove or "exclude" the device, watch the video ua-cam.com/video/qPByat3cFHs/v-deo.html from video marker 02:25 - 04:25. After you exclude the device and add it back in, it should work fine. Let me know...
@@BudsSmartHome , thanks for the quick response! I followed again your removal/exclusion process, and in addition to that, I've also removed the device handler and rebooted the hub before adding the code back under device handler, changing the repository and publishing it out at ST IDE. Moving to ST app, during the scanning process, I got an error message ("you haven't finished secure setup. the device will still be added, but the connection will be less secure and the device may not work correctly") but the scanning was completed and the siren was added to ST app. Moving back to ST IDE, after changing the device type to "dome siren" and reloading ST app, I got another error message ("a network or server error occurred, try again later") when trying to change any siren settings such as "siren sound". Interesting fact, at ST app, the siren shows battery 0% and I already tried replacing the batteries. Please help again! :D Thank you!
@@andreldsantos I recommend that you now try to Repair your Z-Wave Network. Follow the same path to the area were you excluded your Dome device, "Z-Wave utilities", but this time select "Repair Z-Wave Network" and let it run is course. This may do the trick. Again, let me know...
@@BudsSmartHome , thank you again for the ultra fast response! The repair Z-Wave network process took like 2 seconds from starting and finishing and unfortunately did not fix the issue. :(
It sounds like there may be an issue with the installation of the device type handler. Can you look within the smart things IDE and let me know what color text the install device handler is displaying? Also does the device say that it is published?
Hello Mike. What version of the SmartThings Hub do you have? Is it a version two or three, or do you have an older Hub? Also, did you upgrade your home to the new SmartThings?
@@BudsSmartHome I think I see what the problem is now. I was not understanding what a hub was. I didn't know if was a physical device. I do not have a hub. I just have the Ring Security System. I added the dome siren to it a few days ago.
🟠 IMPORTANT UPDATE: Edge Driver Information: This Video is OBSOLETE. I have a post on my website providing updated instructions for installing the Custom Edge Driver. Here is the link to that article: 🔗 How to Install Edge Drivers For the Dome Siren: tinyurl.com/mtvpw3b5
Good to see new device handlers are still coming out to work with the new SmartThings app! Going to install this TODAY!
It's really nice to get all that functionality back for the Dome Siren.
Thank you. I think I've had my Dome Siren for about three years, but just now is the first time it has been successfully attached to my Smartthings Hub. Now I might actually be able to add some automation to my door sensors instead of just "hey Google, what's the temperature of..." :-)
You’re welcome Gar. Enjoy that Dome Siren👍
HI, CIAM NEO Zwave siren Samsung SmartThings Hub I own it, is there a way to connect it? Edge driver?
Hello User. I brief search on the SmartThings Community website did not yield any results. I suggest you request a driver via the site. Here are instructions: community.smartthings.com/t/post-requests-for-zwave-edge-drivers-here-community-created/237327
Oh no.. I'm from Korea, so it's the SmartThings hub, but the MHZ signal is different. The Neo Cool Cam siren is different.. 😩😢
@@user-qn5dz4rj2q - You may want to reach out to the SmartThings Community for a possible solution. The members on that forum are very helpful. community.smartthings.com/
Ring currently Does Not Offer an Outdoor Siren in the USA. Has anyone taken a Dome Siren and used the LED or speaker high to drive a relay to drive an analog dry contact for an outdoor siren?
I would suggest you ask this question via the SmartThings Community. Someone in there may be able to suggest a possible work around. community.smartthings.com/
I don't see a QR code to scan. I don't know how.... I set this up last year with my Ring alarm, but now I can't find the QR code!
I can't figure out how to change the sound it makes. It doesn't match my alarm sound. Any help?
Hello RGC. The QR code should be inside the battery compartment if I remember correctly. The device requires a custom edge driver. Installation instruction and driver channel link is located in an article on my website. You’ll need to login and purchase my edge, driver package, which includes 30+ driver related articles that provide instructions for installing custom drivers for various SmartThings compatible devices. Here is the link to my website article: tinyurl.com/ye27btra
do you have any videos on using a keypad to arm and disarm smartthings? thank you for making it so simple adt really put it to alot of us with them outdating their hub
Hello Morgan. I have no experience with the ADT setup for SmartThings. But if you have access to the SmartThings App you can manually set "Armed Away" for "Disarm" within the App. If you want a "keypad" or panel that is mounted near your door you could install the SharpTools App on a I-Pad and mount the I-Pad on the wall near your door. You could then use a SharpTools dashboard to turn arm or disarm the SmartThings Home Monitor. Here are a couple of videos on how to setup with SharpTools: ua-cam.com/video/W0pbPZCS4oo/v-deo.html & ua-cam.com/video/sIATC7ghAUs/v-deo.html
This is great, thanks. Any ideas if any update is available to the Dome motion sensors? There used to be some settings (motion or light sensibility) available in Smartthings, now it only reports motion (no light).
You're welcome Sebastian. As for the Dome Motion Sensor (Model: DMMS1), Kevin Laframboise published a device type handler (DTH) for the old ST App, see here: community.smartthings.com/t/release-dome-motion-sensor-official/78092 You may want to read through the post to see if the DTH is functional in the new ST App. Keep Automating!
hello Tuya Zigbee siren Are there edge drivers?
Not sure. You may post requests for Zigbee Edge Drivers at: community.smartthings.com/t/post-requests-for-zigbee-edge-drivers-here-community-created/262081
You may also check the, "Quick Browse Lists for Edge Drivers": thingsthataresmart.wiki/index.php?title=Quick_Browse_Lists_for_Edge_Drivers
Hi! I have a Ring Alarm system and was interested in adding the Dome alarm- is it only possible to configure the Dome using the methods described in this video? Thanks!
Yes the dome alarm is a Z wave device. So you should be able to add it to your ring alarm system. I would refer to the ring alarm site for instructions on how to add it. Be aware that it will not have all the functionality that is available in smartthings. In other words it’ll only act as a siren.
Hi Bud! Can this still be used today 8/15/23 somehow?
Absolutely! There is a custom edge driver that was developed by a SmartThings Community Member that works great! I have detailed the steps for downloading and installing the device to your SmartThings or Aeotec hub on my website: www.budshomeautomation.com/post/how-to-install-smartthings-edge-drivers-for-the-dome-siren
There is also a link to a youtube video tutorial as well within that same article. Here is my device affiliate link if you should decide to purchase the Dome Siren: amzn.to/45yLrsx Thank you for your support!
@@BudsSmartHome thank you so much! Sadly tho I’ve signed up it still doesn’t seem to show the steps. Oh well. Thanks anyway.
@@melissamilligan - DM me and I can email you the steps: www.youtube.com/@BudsSmartHome/about (click "view email")
@@BudsSmartHome I would but there’s no view email option.
@@melissamilligan - Under "Details" is states "For business inquiries:" Tap on the button that states: "View email address"...
Hi, How can fix the delay in the chime? I have setup Dome siren with Smarthings. I setup a routine in conjunction with the multipurpose sensor on my door. But when the door opens, there is a delay in Chime and Siren. How can I fix that?
I had a delay initially but I do not have a delay now. Since this is a Z-Wave device I would try to refresh the links to your Z-Wave device network. This can be accomplished by running your repair Z-Wave network utility in your SmartThings App. Find your Hub in the list of devices. Click on your Hub. Click on the ellipsis (three dots) in the upper right hand corner. Click on Z-Wave utilities. Tap on "Repair Z-Wave network".
Also, many of these delays will go away once ST converts all Device Handers over to the new Edge Drivers. This will cause our devices to work locally from the hub rather than the SmartThings (ST) cloud. :)
Hi, Given that SmartThings IDE is going end of life, is there a Edge Driver available to replace this Device Handler ?
Hi Jeff! Thanks for the question.
The answer is yes. The developer has converted the Custom Device Handler to an Edge Driver and and it was reviewed and approved by Dome.
To Install the Edge Driver for Dome Siren amzn.to/3QWmIGG I recommend that you first read the information provided by the developer, Kevin LaFramboise on the SmartThings Community. That information can be found at the following link: community.smartthings.com/t/release-dome-siren-official-2-0/230204
You then can tap on the developer’s invitation link in the article to the Dome Edge Driver Channel, but I will also provide the invitation link and instructions for installing here:
Dome’s Edge Driver Channel: bestow-regional.api.smartthings.com/invite/RPMxr5eQoXlm?
Instructions:
1. Click the link above
2. Log in with your Samsung Account
3. Click the “Enroll” button next to your hub
4. Click the “Available Drivers” button
5. Click the “Install” button below Dome Siren
6. Add the device
Note: I believe that you must be enrolled in the Edge Beta program to install/enroll the edge drivers via the invitation link. If your SmartThings Hub is not enrolled you can enroll your Edge-compatible Hub in the SmartThings Beta Channel by following the instructions here: developer-preview.smartthings.com/docs/sdks/cli/introduction/
Well I did all the steps that you put up there my dome siren does not have any the extra features I don't know why
After you pasted the RAW code into the device handler tab "from code", you must tap on the create button. Following that, you must tap on "Publish" and then tap on "For Me". Otherwise the code will not connect to the GitHub Repository and the Device Handler will not be functional. Login to your SmartThings IDE (SmartThings Account), click on the "My Device Handlers" tab, click on the "Dome Siren" Device Handler to bring up the code you pasted, click on "Save", Click on "Publish" and then click on "For Me" then open your SmartThings App and see if all the extra functionality is there. If not, let me know the color of your text for the Dome Siren device handler.
@@BudsSmartHome ok I'll try after work today
Does this work on the new smart things app
thanks bob
Yes, it works on the new SmartThings App
Thanks for all information provided in that video, very helpful!
My set up is ST hub v3 + ST app and I've faced a lot of issues during installation process before I found your video online.
Did you also change device type from "Z Wave Device" to "dome siren" under ST IDE / Device List / Dome Siren ?
After following your recommended process, I can access all siren features, but can't make any change, customization or automation because my siren shows offline in ST app (error message: "A network or server error accrued. Try again later"). I had already replaced batteries, installed, reinstalled, and same issue. all other devices connected to ST Hub work fine. What am I missing?
RE: Did you also change device type from "Z Wave Device" to "dome siren" under ST IDE / Device List / Dome Siren ?
Yes. However, because it is a Z-Wave device you must first Exclude it in the ST App before adding it as a new device. To remove or "exclude" the device, watch the video ua-cam.com/video/qPByat3cFHs/v-deo.html from video marker 02:25 - 04:25. After you exclude the device and add it back in, it should work fine. Let me know...
@@BudsSmartHome , thanks for the quick response!
I followed again your removal/exclusion process, and in addition to that, I've also removed the device handler and rebooted the hub before adding the code back under device handler, changing the repository and publishing it out at ST IDE.
Moving to ST app, during the scanning process, I got an error message ("you haven't finished secure setup. the device will still be added, but the connection will be less secure and the device may not work correctly") but the scanning was completed and the siren was added to ST app.
Moving back to ST IDE, after changing the device type to "dome siren" and reloading ST app, I got another error message ("a network or server error occurred, try again later") when trying to change any siren settings such as "siren sound". Interesting fact, at ST app, the siren shows battery 0% and I already tried replacing the batteries.
Please help again! :D
Thank you!
@@andreldsantos I recommend that you now try to Repair your Z-Wave Network. Follow the same path to the area were you excluded your Dome device, "Z-Wave utilities", but this time select "Repair Z-Wave Network" and let it run is course. This may do the trick. Again, let me know...
@@BudsSmartHome , thank you again for the ultra fast response! The repair Z-Wave network process took like 2 seconds from starting and finishing and unfortunately did not fix the issue. :(
It sounds like there may be an issue with the installation of the device type handler. Can you look within the smart things IDE and let me know what color text the install device handler is displaying? Also does the device say that it is published?
I cannot get as far as adding the device because I do not know how to "claim" my hub. Any advice?
Hello Mike. What version of the SmartThings Hub do you have? Is it a version two or three, or do you have an older Hub? Also, did you upgrade your home to the new SmartThings?
@@BudsSmartHome I think I see what the problem is now. I was not understanding what a hub was. I didn't know if was a physical device. I do not have a hub. I just have the Ring Security System. I added the dome siren to it a few days ago.