Nissan 180sx | R33/Z32 Drum Handbrake Conversion
Вставка
- Опубліковано 26 сер 2024
- In this video you'll see how to install an R33 and Z32 Drum Handbrake Conversion on a Nissan Silvia s13/s14/s15, 180sx, 200sx and 240sx!
This R33/Z32 Drum Handbrake Conversion is a very popular choice in the drifting world allowing improved initial bite and faster lockup to get you started going sideways!
Thanks man! Helped me get my handbrake assembly together!!
No worries man glad it helped! It can get tricky haha 👍🏽
your workshop is so neat
Haha thanks! Always try stay ontop of it 👌🏽
So the hub needs no modification, the r33/z32 handbrake assembley fits onto the s14/s15 hub, you put everything in place and the brake disc for the foot brake gos over the handbrake shoe assembly correct? Let me know if i understand correctly.
Nice clear instructions thanks man doing this mod to my s14cin next few days
No worries man! Glad I could help ✌🏽
@@DeeJayZeee have you installed your rotors yet?
@@zenkisilvias1428 Nah not yet I ran into a problem with my rear knuckles haha
I have an s14 rear subframe with s14 arms and knuckles but I’ve just found out that I need to use s13 rear knuckles.. so I basically have to undo everything I’ve done in the rear 😅
I hope I don't need to replace anything as it took me so lonnnnng to find the drum brakes alone 😒 I'm running an s15 rear subframe in a s14 and r33 5 stud hubs (been told) but currently running the factory single pot s14 calipers
@@zenkisilvias1428 Yeah you should be fine, just have to check the spline count on the new hubs match the spline count on your axles 👍🏽
Only reason I have to go back and change my knuckles is cause the s14 knuckle coilover mount is different and the coilovers won’t seat properly
Are you upgrading to r33 rotors/brakes while your at it?
My handbrake leaver stop clicking and staying up. Any ideas?
Thanks so much man
No worries man 👍🏽
You made that look to easy!
and then do you just put your normal silvia hub back on and its good to go ? so technicaly you can pull the drum handbrake stuff from a 4stud 33 aswell even if your silvia is 5 stud???
I’m not 100% sure about that one sorry, might have to do some digging in forums. I’d say mainly make sure your rotor to suit 4 Stud hub fits over the r33 handbrake assembly.