BMW E36 Bee-r Rev Limiter Install (2 Step Launch Control)

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • How-to install a bee-r rev limiter on your E36, this example is for an obd1 BMW 325 with an M50. M52/328 install is slightly different (crank signal instead of coil pack power). Good for when your chip tune revs to the moon with no easy way of turning it down.
    IG: @aco.b

КОМЕНТАРІ • 27

  • @huntercongdon80
    @huntercongdon80 10 місяців тому +5

    Dude I can wrap my head around a single thing your saying bro 😂 I need Help

  • @90sbeemer67
    @90sbeemer67 Рік тому +13

    post a 2 step video

  • @iroyal7684
    @iroyal7684 5 місяців тому +5

    So I installed my bee r limter but when I 2 step it doesn’t shoot any flames, only acts like rev limter but only when I floor it and past the rpm limit and let go it shoots flames. Maybe bad wiring?

    • @e436.
      @e436. 4 місяці тому

      Can you help me install it for my e36 ❤

    • @BMWiE36
      @BMWiE36 Місяць тому

      Maybe try changing your gain, if you havent then try to put it on F

  • @JQNAH
    @JQNAH 2 місяці тому

    1:21 that was musical

  • @akramziyad8877
    @akramziyad8877 Місяць тому

    Sorry, I would like to ask for instructions for installation on the bmw e30 engine m40.

  • @Darkaccent
    @Darkaccent Рік тому

    Clean 36 mate

  • @markpirkhoffer428
    @markpirkhoffer428 Рік тому +2

    Have you get any knowledge on fitting one of these to a obd 2 bmw z4 2.2i? Have gone through the cam shaft position sensor and the rev counter in the obd wiring but it throws out O2 sensor codes ?

  • @etmaelmendoza9960
    @etmaelmendoza9960 Рік тому +3

    what's your wheel size/fitment?

  • @iroyal7684
    @iroyal7684 9 місяців тому +1

    Any update video?

  • @risingz3366
    @risingz3366 6 місяців тому

    Hi, maybe you can help me, I got a M52B25 and I can't get the bee R to work :/ Got the RPM signal as well on pin 20, and the other signal I tried to get from the Crank shaft sensor... Pin 83.. But it doesn't work... It recognizes the rpm but doesn't cut there :/

  • @pixelll
    @pixelll 10 місяців тому

    Why go through a relay instead of straight to coilpack / crank sensor signal wire?

  • @maxfauzakis5317
    @maxfauzakis5317 7 місяців тому

    where did you buy it. because I had taken one and it didn't work

  • @baggedtuned8569
    @baggedtuned8569 9 місяців тому

    RIP imai san

  • @Bahmanson
    @Bahmanson Рік тому +1

    Which model of bee-r did u used ?

  • @Bruno2204
    @Bruno2204 11 місяців тому +1

    On which site did you buy this thing?

  • @francoispourchier1353
    @francoispourchier1353 12 днів тому

    hello can you make a new video easier to understand the girl its not well tidy and the photos are blurry plus I don't understand English well it would be good there is no video in French for the e36 can you master one French subtitles

  • @jeppelampe4103
    @jeppelampe4103 Рік тому

    What relay do you use. I can not get mine to activate a relay

  • @nsjb_tj8341
    @nsjb_tj8341 10 місяців тому

    How did you wire the bee r with a relay?

  • @mi60100
    @mi60100 7 місяців тому

    Where can i buy one

  • @nsjb_tj8341
    @nsjb_tj8341 10 місяців тому

    I’m so confused pleaseee helppp

  • @Bye401K
    @Bye401K Рік тому +3

    aaaaand....3..2..1, kiss your valves good bye.

    • @Daniel240sx
      @Daniel240sx Рік тому +6

      Its not cutting the Injectors Its cutting the spark so Its harmless unless you abuse it

  • @olivierstevens4134
    @olivierstevens4134 Рік тому +1

    Why woud jou ruin a nice e36 with this crapp. Just get a decent tune or stand alone managment system.

    • @96Caleb96
      @96Caleb96 Рік тому

      You kids ruin the point of the car community and our shitboxes haha, "car guys" used to not care about trying different sometimes obnoxious things on cheap cars.