Figuring things out..
Вставка
- Опубліковано 10 вер 2024
- Moving has been slow but let's figure out this desk / livestream setup and talk gearrrrrr!
Make it with Squarespace - Save 10% www.squarespac...
Texas Photo studio - / bookblanco
/ saradietschy
/ saradietschy
GEAR!
LG Ultrawide 34" Display on Amazon - geni.us/34WN78...
Display on LG Site - bit.ly/3cPvZzJ
Rodecaster Pro Midi controller update - www.rode.com/b...
Rodecaster Pro - amzn.to/3eiom44
Blackmagic Atem Mini Pro ISO - amzn.to/3nbqezG
Elgato Camlink Pro - amzn.to/3vcMImW
Elgato Light Strips - amzn.to/3dKogmI
Elgato Wave Sound Panels - www.elgato.com...
Logitech Brio UHD Webcam - amzn.to/3xfQn57
Blue Mics - amzn.to/3nhtbif
I grew up in flower mound and spent so much time in grapevine. Went home a few weeks ago to visit my parents and we drove past the studio! It looks so good!
The algorithm pushed this so hard. I am not even subbed. But It was on my recommended page. I've never hear of you or even know who you are. You seem pleasant thought.
Lol well WELCOME
Lol can confirm, she is pleasant
I work in a TV studio, where our video switcher has 40 inputs, 16 outputs, 3 M/Es, 6 DSKs and a whole lot of buttons that I still haven't figured out how to use yet. It probably cost them half a million for the whole suite, so it gives me a chuckle whenever Blackmagic puts out one of these little ATEM boxes that does everything that live TV shows do 90% of the time.
I am loving what you and John have both been creating on your channels lately since the move.
I was about to ask about John. I haven't been good at keeping up but I'm guessing we still have parents.
I’ve been on the fence for this for a minute and it’s time to get that ATEM, thanks 🙏
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
The stress shirt is an entire mood 😂💛
Oh quick tip about the Road Caster pro and the ATEM working together
For streaming using the ATEM you can use the RCP with the right cable a "3.5mm TRS Male to Dual 1/4-inch TS Male Left/Right" (- I prefer Mogami) ---you can plug the speaker output of the RCP to the mic 1 of the ATEM , RCP (speaker out volume knob all the way up ) and in the atem software turn mic 1 to line by default it is set to mic and in mic their is a horrible buzz. And now you can use the full features of the RCP and stream from the ATEM and use the ATEM audio delay to sync up sound live if their is any audio delay. It also just make for a simpler setup in webcam mode for Skype etc.. bc u just choose the atem as the webcam and the audio source ! (Instead of webcam ATEM audio RCP - which gives you no option to sync video and audio )
I think the ATEM should ship with that port in line mode not mic it's really confusing at first
Switcher box & a teleprompter: life is about to get real efficient
Yup
I love that creative life :) I’m also enjoying these videos where you let things to just be a bit less polished and still get the work done.
This is a fantastic setup. Wow, I love cool tech. This is basically bringing professional TV production into your home or office. Pretty cool, Sara.
Thanks for the Squarespace discount! I just jumped on and started a website to drive people to my tutoring and academic coaching business. I've been doing websites off and on for more than 20 years, and Squarespace is hands down the easiest to use interface I've ever used. So pleased! Also, LOVED this video, Sara. It led to me buying a new Blue Yeti mic and doing a new Zoom video setup. Webcam is next!
That desk/office cleaning was sooooo satisfying best 4 seconds of my day lol
Love you and this vid 💯👍
I love your videos! They feel so real and relatable, I've been looking for equipment too so it's a bit comforting seeing the pros trying to figure it out.
I have been working on a tablet-based open-source teleprompter and have built a foldable/portable teleprompting hood. I would love to figure out how to get it manufactured, but by the time I do, the market will probably already be saturated. Anyway! Loving the new setup. Hope you are re-acclimating to your Texas life. Can't wait to see more from you in the new office. Always inspiring!
That is what i was looking for. So smart Sara!
Stress is my alma mater as well.
I enjoy her enthusiastic, her smile and her general aura.
Excellent video, I mean come on, who doesn't love new gear and seeing how it works 👍😎👍
I learned something and this video made me smile :)
That mic is absolutely awesome.
If you see a Rodecaster in a video there's a 100% chance you'll see a Tom Buck in the comments.
If you want the auxiliary function get the ATM mini extreme ISO. That model has two HDMI outs. That along with an elgato stream deck and some macros in the atem you can program the macros to pick any of the inputs on the stream deck and put it to that second HDMI out for the teleprompter !! This way your multiview never goes away you can always have a multiview screen up. As well as a second teleprompter screen
Maybe one day!!! But that thing is way too big for my desk 😂 didn’t know about the 2 outs tho that’s AWESOME
@@saradietschy yeah totally get that it's not that much bigger and you can get creative with the eight inputs but it's those two HDMI outs that really make it worth it ! It also has 2 usb-c ports USB c ports so you can record your stream directly to a hard drive while you're using it as a webcam to have a higher quality recording for editing afterwards.
You can print art onto the fabric of diy Rockwool sound absorbers. Better sound absorption than foam or fiberglass and can be art.
Great video as always Sara. The work that you put into edit / color / sound doesn't go unnoticed.
Such a great set up!! Thank you for sharing!!!!
Love your videos! Keeping smashing it. Much love from Scotland
I liked this vid : ) a little walk through with new tech and lightly how to use it. a little educational bite for me
If you haven't hung those sound panels yet, an interesting video might be to record while you take them out of the box. In the room you did the mail opening, you will literally hear the change in the room acoustics as the pads come out of the box and are spread into the room. I used to sell acoustic foam. Unpacking in a reverberant room was a great sales tool.
You're so great at showing off squarespace. 😄 I've seen many other creators sponsored by them but they all say basically the same thing and you mentioned things squarespace does that I never knew about.
Love the energy and the tech you showed off in the video!! Also the windows in the office are beautiful
I have been using the ATEM mini switchers for about a year doing freelance livestreams and it is really powerful. Aaron Parecki’s channel has been really helpful
Late reply is late here, but you can get a cable that has 2x 1/4" audio ports to 1 3.5mm audio port, plug that from the 'speaker' port in the Rodecaster into line 1 or line 2 in the ATEM Mini pro. Then in the ATEM Mini Pro software you set the input to 'line level' instead of 'mic level' and you are off to the races!
Also you should really look at the ATEM Mini Extreme ISO, it gives you 2 HDMI outputs PLUS 2 USB-C outputs, so you could have 1 HDMI go to the prompter, 1 for a monitor, 1 USB for recording, and 1 for webcam out for livestreaming.
Congrats on the setup, very slick! All the best to you guys on this new chapter!
Before this whole pandemic thing, I had a nice and big 45" Philips curved monitor at work to do my CAD work, but now I've to do with just the laptop screen while working from home. This LG monitor seems to be a perfect fit for my desk with that special stand. Now seriously considering requesting one from the IT department.
Wall mounted boom arms are a lifesaver for mounting those lights!
Hi Sara, I enjoyed your "Figuring things out" video. It was very informative and I like this format. Thanks for sharing.
I’ve been following you for a long time. I took a break just before the pandemic because I just wasn’t vibing with the content so much anymore. I’m glad I started watching your videos again today :)
Dense with helpful information as always... looking forward to the return of the Creative Life
I love that your creative mind is just flowing with ideas!!
Loved this. Now i am more motivated to finish my home office/youtube set. Love the length as well.
That's some pretty awesome new gear. Really enjoyed the video
Hey Sara - I just put up lighting in my studio. After looking around for a bit I ended up at a scaffold supply place. Really cheap, and 2" standard like any lighting rigs so perfect for super clamps with standard spigots. can do runs right across that room with out bending.
This was so much fun!
I use the ATEM Mini Pro ISO on a weekly basis and I hadn't noticed that option with the video out - I'll have to try that out! Thanks for pointing that out =)
Good video, and keep them Purdy Eyes shining!!!!
All coming together great! Baby steps, you're getting there.
Ya don't want to output 3.5mm to the ATEM. Use the Rodecaster as a USB audio interface instead and you'll get MUCH better audio!
Excited for the livestreams!
Sara, I spotted a piece of 3d moving art on the bottom shelf of your office, it looks fabulous! Can you please share any details about it or where to get one?
Exactly, I have the same question ❓ What is that? The one with a white frame.
It was cool to watch your process setting everything up!
Looks like loads of fun!
Logitech a little soft wouldn't you say?
Wow, Sara's going all TV studio!. nice.
Also, I find my audio is about 225ms ahead of my video when using the ATEM Studio HD that I have and I noticed your audio was out of sync right here: 21:36 Get into the ATEM software and make that offset and you'll be "peachy"! ;) use the clap test to help find your sync point for your application.
You should have got the Blackmagic ATEM Mini Pro ISO Extreme!
Too big for the desk 😂
definitely P90x throwback vibes. am I the only one?
Really enjoyed this hangout vibe. We deserve a part 2
Great vibes in this ! I moved recently as well so I totally understand the joy and struggles to get the perfect setup. With some more lights you will get there ! Cheers from France
Wow!!! Amazing. You did a great job. I follow Kevin for while and I saw you the first time at his channel. its incredible how you did everything. I am learn a lot about tech with you.
happy to see you are getting somewhere with your new setup. also, datum Sara your eyes really pop with that makeup 😍
super dope vid! thanks for all the info!
My life is kinda in crisis right now, so watching this video was very uplifting 😁
Love your energy 💚
It’s not one for one (per Chanel of audio), but you could run a 3.5mm audio cable out of the front of the Rodecaster and run it into the audio in on the ATEM mini.
I love videos like this would love to see more of the trail and error, much love 😍
Imagine you can get elgato stream deck with constalation software and then you can create macros to control atem mini - much more fun. For example - if you modify size of the PIP picture on atem, it resets back after you position it to another corner - in elgato you can program it as macros and voila, it works awesome. I already bought a lot of stuff after your “Meet Kevin” video and went the same way as you - atem mini pro + teleprompter :)... thx for the content 👍
I just got an Elgato cam link pro and it’s been awesome so far!
I really liked the video!
And oh my don't I need all the tech at all, but I love to watch it so much HAHA Excited to see your finished setup!
Take care of yourself 🌸
Grapevine... Hard 8 BBQ - worth the stop ... :) -- update: It's actually formally in Coppell I guess - Bethel and Freeport... used to drive a couple blocks up there for lunch for 3 years...
Christmas in April is fun!!
Awesome. Best of luck fine tuning the set up!
Top video Sara, glad you're enjoying the ATEM Mini Pro. To get your Rodecaster audio into the ATEM you just need a 3.5mm Mini Stereo Jack to Dual 6.35mm Mono Cable. Hope this helps and hit me up if you need advice or tips with the ATEM Mini :)
Hi Sara, ...my hint... you try to figure out the desk, camera and light first. But a good method for a new room is to start with a corner where you can sit down with two people for an interview setting or just to relax during a workday. My second hint... : Your table and monitor is in front of the window, it will block natural light if you film near to your shelfs. Maybe let it sit against the wall? That way you can have artificial light left and right to the desk and natural light not blocked during the day. Enjoy! Creating a new studio is fun for sure! Greetings from the Netherlands :-)
Love the ATEM Mini Pro, it's such good bang for the buck and can make very professional looking and high quality streams (assuming your internet can handle it, mine only just struggles by having halved the bitrate from the lowest default 😂)
U have A LOT OF TECH GEAR! 🖤🖤
This is an amazing set up! It's always fun to start in a fresh space with the knowledge of your previous setups. - I have an elgato streamdeck and only use it to turn on my lights - a lot of wasted potential. I love my teleprompter - it's just a small one that uses my phone as the screen but it is so great since I can't talk and think at the same time for some reason - but I can read and talk no issue. I think it's because I'm not talking to anybody - if I got someone to talk to I'm actually pretty good.
You are so much fun to watch
Send the ATEM Mini Pro ISO back and get the ATEM Extreme ISO. You may thing you don't need 8 inputs or that SuperSource, but it is a game changer.
I’m not doing any of this (probably) but I love listening to you explaining it.
This monitor is amazing
Would definitely love it if you livestream! Your insight and overall personality would be amazing to interact with more often.
Insane setup as always! Looks like you're ready to livestream like a pro. 👍
I got the Roland VR1-HD after seeing Kevin’s set up.... obsessed. Lol 😆
cool setup Sara!
Thank you very informative
Hey Sara! Glad to see you're getting set up properly in TX! Interesting that those sound panels have clips to hang. Better than glue, for sure. BTW, I've used a midi sequencer to drive camera switching on the fly, remote-style, so I don't have to switch manually. The roundabout of switching can get repetitive, but it works if I'm trying to stream live and I'm playing and don't want to use either of my hands to trigger the switcher. I drive the midi with a sequencer on my keyboard, believe it or not - and the tempo dictates how fast or slow the cameras change! Haha! Now if I just had something stream-worthy to say... 🤷♂️
I love this video, Sara setting up her gig. Just like us.
I wish I had a job like yours!
this is so cool!!
production is always interesting. good job
I don't understand the picture and picture and showing your desktop. Is that a feature of the atem mini or OBS. And if it's obs how do I set that up
Just saw the IG story and would like to say I would love an Edmund Mitchell + Sara Dietschy / Sara Dietschy + Edmund Mitchell podcast episode 🥺🥺🥺
Love this
Hey Sara, could you do a video on Right to Repair with Louis Rossmann? It would be awesome.
much love to the good ol vlog vibes!!
Pumped for the Podcast coming back!
Thanks for posting! I have been using obs with just my mouse... that switcher is pretty sweet.
Ouu that RODE stream deck is really cool! We're thinking about getting something similar! We already have the BM switcher. We use it to stream productions remote for clients when we can't have people in the studio.
Never too long a video w Sara!!!
you need a mini stream deck with the road caster and the atem mini
Sara i love your videos
I don't stream, don't plan to stream, but now I want this setup.. thanks Sara!
I love your video Sara
Audio is crispy!!!!
Loving it!!!