Bought a Chinese Gopro bracket at £35, looked the same, but didn't fit. Had to send it back, now ordered the Wunderlick bracket. Should have done that in the first place.
It seems to be very well done but I suppose that is important to show how the screen regulator works with this mount. I am afraid that it could be difficult to put the windscreen in the lower position.
Did any one point out to Toby it's not central ;) I had one on my RT for my Garmin VIRB camera, yes they are expensive but the mount felt strong enough to lift the front of the bike up. When your mounting a £300+ camera to external wind pressures not protected by any fairing I found the over engineering very reassuring. On the RT the camera is central too ;)
How about some footage of what this looks like at speed? Great video....I am trying decide where to mount a camera in the front of the bike-not on the helmet...
if you check out the touring videos of us riding... Mark and I came down through the Pico mountains and most of that footage is from the GoPro mounted on this mount... a really sturdy bracket and gives some great results
@@RiderCamTV thanks! I putting a Go Pro mount on the beak of the bike and view is stunning. I also considered the Wunderlich, but the price gave me a nosebleed, LOL
Thanks for this. Just bought a Go-Pro Session 5 and this overly engineered /expensive but good looking bracket. As usual Wunderlich instructions are rubbish so this has saved me loads of hassel😀👍🏽
+Nick Turnbull excellent, glad it helped Nick. Wunderlich make some great stuff but they really could do with better instructions. Perhaps they could send it all to us and we could make more videos. Hehehe. Ride safe matey :)
Thanks! Very helpful. Just would have loved it if you would have zoomed out so I could see the finished result. Extra plus for not talking more than necessary ⭐️
Late to the pass with GoPro but looking at fitting one on this mount to help with IAM Observing - one of my associates seemed a little disappointed when I couldn't show him a video of his ride! Can you point me to one of your vids where this camera position is used? Thanks.
he buddy, its a great mount and with the gopro in it, provides some amazing footage that really shows how well the bike deals with bumpy roads (as there is next to no movement in the camera). The tour video that we did at around 8 minutes or so through the picos was filmed using a GoPro Session on this mount.. :) hope that helps
hey matey, great to hear from you and hope that the journey you were on went well. welcome to the channel matey.... :) remember to hit that subscribe button to watch our new vids...
Mate you hurt my brain, you literally over-tight all the bolts, i think you should have max 5Nm a 10Nm torque at this screws. you risk to break the treats of the inner bolt or to break the plastic around the screws and bolts.
Bought a Chinese Gopro bracket at £35, looked the same, but didn't fit. Had to send it back, now ordered the Wunderlick bracket. Should have done that in the first place.
i must admit in inpressed Wunderich make some nice stuff .thought there would be a strap in case it falls off look forward to some great videos now
+peter foster they certainly do make good stuff. The GoPro is held on quite well but a cord would have been a nice touch :)
Do you have any idea if this would work with the Lone Rider headlight guard? Thanks
It seems to be very well done but I suppose that is important to show how the screen regulator works with this mount. I am afraid that it could be difficult to put the windscreen in the lower position.
Your right as it does come close but not had any issues on the low setting for the screen up till now
Did any one point out to Toby it's not central ;) I had one on my RT for my Garmin VIRB camera, yes they are expensive but the mount felt strong enough to lift the front of the bike up. When your mounting a £300+ camera to external wind pressures not protected by any fairing I found the over engineering very reassuring. On the RT the camera is central too ;)
hahahhaa, yeah its not central . eek!! totally with you on the quality to hold expensive cameras :)
Good video…does this bracket work with the standard BMW screen?
yep, all uses the standard connections to the bike. It works with the standard screen too
Helpful video, looking at buying one for my GS, my only question is, does it interfere with screen adjustment
Hey mate. Thanks for the kind words. It hasn’t impacted on the screen adjustment at all that I’ve noticed :)
How about some footage of what this looks like at speed? Great video....I am trying decide where to mount a camera in the front of the bike-not on the helmet...
if you check out the touring videos of us riding... Mark and I came down through the Pico mountains and most of that footage is from the GoPro mounted on this mount... a really sturdy bracket and gives some great results
@@RiderCamTV thanks! I putting a Go Pro mount on the beak of the bike and view is stunning. I also considered the Wunderlich, but the price gave me a nosebleed, LOL
@@RiderCamTV Very nice bracket! Thanks!
Thanks for this. Just bought a Go-Pro Session 5 and this overly engineered /expensive but good looking bracket. As usual Wunderlich instructions are rubbish so this has saved me loads of hassel😀👍🏽
+Nick Turnbull excellent, glad it helped Nick. Wunderlich make some great stuff but they really could do with better instructions. Perhaps they could send it all to us and we could make more videos. Hehehe.
Ride safe matey :)
RiderCamTV it would make perfect sense 😀
+Nick Turnbull hehehe 👌😀
Thanks! Very helpful. Just would have loved it if you would have zoomed out so I could see the finished result. Extra plus for not talking more than necessary ⭐️
another great video!...interested to see if they do something similar for Drift cameras!
thanks for the kind wodrs. i dont think that they do, but i guess a bit of giggery pockery you could use it on a drift as well :)
You can get Drift GoPro Mount Adapters.
+StallyMan cool. I'll have a look
Late to the pass with GoPro but looking at fitting one on this mount to help with IAM Observing - one of my associates seemed a little disappointed when I couldn't show him a video of his ride! Can you point me to one of your vids where this camera position is used? Thanks.
he buddy, its a great mount and with the gopro in it, provides some amazing footage that really shows how well the bike deals with bumpy roads (as there is next to no movement in the camera). The tour video that we did at around 8 minutes or so through the picos was filmed using a GoPro Session on this mount.. :) hope that helps
forgot to add the link ua-cam.com/video/UuoNGOShEyY/v-deo.html
Excellent, nice and steady and not too low down for observing - associates beware! Thanks buddy.
Hi I'm the kid u met on the weekend when going up to Devon on the harley
hey matey, great to hear from you and hope that the journey you were on went well. welcome to the channel matey.... :) remember to hit that subscribe button to watch our new vids...
Thank you very much! Cheers
Wuau, sera que tem para gs 1250 adv?
It fits both the 1200 and 1250
good video
+ADVCityGuy thanks :)
HOW MUCH??? You should have gone on eBay fella and got a Chinese copy for £23...
+StallyMan lol. You are right :) but it's good all the same
I did and it didn't fit.
Mate you hurt my brain, you literally over-tight all the bolts, i think you should have max 5Nm a 10Nm torque at this screws.
you risk to break the treats of the inner bolt or to break the plastic around the screws and bolts.