87 is what the motor is initially tuned for. It’s not that high of compression, if you want to tune it for 91 then by all means, but 90% of the “high comp” B20’s out there are not actual high comps.
@@ChrisSadowski oh ok ok yea cause I was confused at first some was saying it’s 93 cause of the high comp and the low comp b20s run 87 but reall they all run 87
Mind if I ask what your suspension and wheel set up is? I just fell into a DA, bought it at an auction and I'm really liking it but wanna get an idea of lowering and the like. Thx in advance!
At the time of this video I was on Function and Form type 1 coilovers (still have them and I love them) and my wheels at this time we’re XXR 531’s and they were 16x8 with 0 offset running a 205/40/16 tire. With -8 degrees of camber in the rear and -3 up front and rolled all my fenders
Thanks man! I can't wait till I can afford a gimbal to get super clean steady shots. But I'm using a tuned pr4 I think? It was tuned for a H22 build my friend was doing but it never ran right in his car. But it runs my b20 pretty much perfect lol
It's funny how forgiving those old Hondas are with tuning. I get a lot of crap from one of my friends because I'm still running the original OBD0 ECU with my JDM B18B, but it works! haha. I picked up an OBD1 ECU years ago and still haven't gotten the jumper harnesses to convert. Someday...
Daniel Ortega the b20 is .2 liters bigger and a little bit more torquey. But the main difference is in the block, the sleeves are a single piece cast sleeve whereas the b18 sleeves are individually cast. Slightly different design is all. You don't feel too much of a power difference
Yo did you sell this I just picked up a 92 interga looks damn near identical slot of the same parts but looks to be upgraded more now anyway I'm from az if ya did let me know I wanna find out. Lol clean af though!!
I did not, I still own this car although much different now. No more stance, I swapped a k20a2 into it and converted it RHD. Still drive it and make videos on it!
you think I can make it fit with a 195/40?(16x8) my fenders are rolled and pulled and I have a good amount of camber already with the stock arms. I fit 15x8 +20 with a 10mm spacer fine with a 195/45 tire.
umm maybe. Im running 16x8 0 offset with 205/40/16 tires that have a half inch stretch. Even with my camber my fronts poke just a hair and i just put enough camber so the rears just barely go inside the wheel arch
moneyman89065 ehh to each his own. I like them and all the part brands are actually parts I have on the car so I'm not falsely advertising and I think they add character to it as well in a sense
Can you smog that B20 motor without a BAR'd sticker? I'm assuming most mechanics doesn't care or know? And btw, you need to fix the camber on that blue Integra!
I was at circle k and saw you roll by so i had to catch up and pay my respect good stuff dude
so clean man, more da Vids !!
You got it!
@@ChrisSadowski Bro Keep Posting more 📹.
Yo dude I love your vids they're dope as hell and props on the clean ass DA you got! 🔰🔰🔰
Thanks man! Glad you enjoy them!
dope vid bro plus clean simple build man keep up the great work and man if u can find a b16 trans with that motor man that car will be flying
I'm thinking of doing a b20 b16 head and tranny. Idk what I'm asking for 👹
I got one with a b20 and the a1 trans pulls 4.4 ratio stock on those but b16 is lil shorter
Love those wheels, Chris.
OhYeahAboutThat thanks my dude
OhYeahAboutThat xxr 531
Curtis Williams those are it!
Car looks great Chris 👍 I need to pick one up before they become extinct.
Car looks much different nowadays if you check out more recent videos.
@@ChrisSadowski Word man will do. I hadn't checked up on your channel for awhile.
I think you’ll like the car a little more nowadays haha
Whats size rims
16x8
Ok thanks you
very nice
Did you do the swap yourself?
B20 was in the car when I bought it. But have since then done a B20Vtec conversion and now it has a K20a2 swap in it and I converted it to RHD
What is size tire and rim of integra in this video?
16x8 0 offset with a 205/40
Salute bruhhh... she is clean
Gary Phloyngam thanks man, you gotta check it out in my more recent videos. The car has come a long way since this video
Aye when you swapped the integra with a b20 high comp what type of gas did you run did u stay 87 or had to run 93 cause of the high comp
87 is what the motor is initially tuned for. It’s not that high of compression, if you want to tune it for 91 then by all means, but 90% of the “high comp” B20’s out there are not actual high comps.
@@ChrisSadowski oh ok ok yea cause I was confused at first some was saying it’s 93 cause of the high comp and the low comp b20s run 87 but reall they all run 87
Nice teg^^
Thanks man!
your welcome^^ keep up the great videos, your getting better^•^
I really appreciate that! I'm trying hard! Haha
Yo man just got my b20 motor running with a ls trans but my mounts are shot any idea on which mounts I would need
Hasport has what you need
brother i loved your integra i know u lived in AZ great work my buddy's
What are those wheels?
These were XXR 531’s
Nice video.. What kind of clutch Did you go with ?
At the time I was using an exedy stage 2 I think. Basically OEM replacement
ChrisSadowski 👍 I just did b20b swap in my 1990 Integra LS i just can’t figure it out what clutch an flywheel to put in 🤔
Any b series clutch and flywheel work
Thanks man! I just order a exedy oe an a flywheel
best car in the world da6 first honda to ever have vtec original
Mind if I ask what your suspension and wheel set up is? I just fell into a DA, bought it at an auction and I'm really liking it but wanna get an idea of lowering and the like. Thx in advance!
At the time of this video I was on Function and Form type 1 coilovers (still have them and I love them) and my wheels at this time we’re XXR 531’s and they were 16x8 with 0 offset running a 205/40/16 tire. With -8 degrees of camber in the rear and -3 up front and rolled all my fenders
@@ChrisSadowski yoooooooo this helps so much you don't even know!!! Thx bruh
Nice video man. Well shot overall and beautiful scenery. And of course I'm liking the DA Integra! What ECU are you using for the B20?
Thanks man! I can't wait till I can afford a gimbal to get super clean steady shots. But I'm using a tuned pr4 I think? It was tuned for a H22 build my friend was doing but it never ran right in his car. But it runs my b20 pretty much perfect lol
It's funny how forgiving those old Hondas are with tuning. I get a lot of crap from one of my friends because I'm still running the original OBD0 ECU with my JDM B18B, but it works! haha. I picked up an OBD1 ECU years ago and still haven't gotten the jumper harnesses to convert. Someday...
Can someone tell me what are the differences between k20 and b20
Me Gusta
Is your b20 have the p8r cams or the p75
Craig Chambers my black Integra has the P8R my blue one has the regular p75 head
why does my b20b da7 sounds different
Different header, different exhaust
What's the difference between a b18 and a b20? Sorry it's just that I'm not a car person whatsoever. I have a 92 integra.
Daniel Ortega the b20 is .2 liters bigger and a little bit more torquey. But the main difference is in the block, the sleeves are a single piece cast sleeve whereas the b18 sleeves are individually cast. Slightly different design is all. You don't feel too much of a power difference
as like my integra.Peyman from Iran
Yo did you sell this I just picked up a 92 interga looks damn near identical slot of the same parts but looks to be upgraded more now anyway I'm from az if ya did let me know I wanna find out. Lol clean af though!!
I did not, I still own this car although much different now. No more stance, I swapped a k20a2 into it and converted it RHD. Still drive it and make videos on it!
@@ChrisSadowski that's hella dope dude that's goals right there! I'll have to check out the videos!
I'm a proud owner of: 1991 acura integra gs db1
jose deleon that's what's up!
That's awesome bro...I got 91 also**b20z2
I miss when the teggy was blue
Same
@@ChrisSadowski will u paint the teggy again
bryan coronel yeah I’ve been thinking when I do it if I should go to like electron pearl blue or maybe do a shade of frost white with blue flake
did you swap that yourself ? need help on what adjustments to make from going to b18a1 to b20b
what help are you needing? as long as your staying obd1 its literally all just plug and play
What ecu did you run on this swap?
Stock ecu
what brand are those rims I been trying to figure that specific brand out for awhile I want to put those on my DB1
Romeo reyes they are XXR 531's
Where u at Huachuca city?
Mesa AZ
What fitment is on this?
Wheels were 16x8 0 offset on a 205/45/16 tire with -3 front camber and -8 rear
What rim size are those?
16x8 with 0 offset on a 205/45/16 tire
do you know how much camber you have? I want some 0 offset for my ek and I wanna try to fit it without a camber kit.
shine50588 I think my rear is around -4 or 5 and the front is probably -3 I don't have my alignment spec sheet anymore sorry
you think I can make it fit with a 195/40?(16x8) my fenders are rolled and pulled and I have a good amount of camber already with the stock arms. I fit 15x8 +20 with a 10mm spacer fine with a 195/45 tire.
umm maybe. Im running 16x8 0 offset with 205/40/16 tires that have a half inch stretch. Even with my camber my fronts poke just a hair and i just put enough camber so the rears just barely go inside the wheel arch
Color?
Devoid rustoleum metallic blue. At the time. Currently is oem frost white
where is this ??
j. Beltran in the Far East Apache junction at the base of the Superstition Mountains
Can do without stickers
moneyman89065 ehh to each his own. I like them and all the part brands are actually parts I have on the car so I'm not falsely advertising and I think they add character to it as well in a sense
greets from PL your name smells polish :)
Side skirts?
EK civic side skirts. Not sure if the year but if you google them they are easy to see. Just gotta cut them up a bit to fit
Well they look good!
Can you smog that B20 motor without a BAR'd sticker? I'm assuming most mechanics doesn't care or know? And btw, you need to fix the camber on that blue Integra!
Tony Kart Racer I have no clue what a bar sticker is lol. But I don't see why they wouldn't let you smog it
That song makes me wanna puke. Sweet ass ride though!
clean DA boutta pick up some ek skirts for mine as well
zach s I love them. I think they look great on our car
ChrisSadowski i got offered a pair for 20 bucks so im not complaining lol look great on yours
ChrisSadowski tempted to do it on mine aswell
🙌🙌🙌💦💦💦💦💦💦
Spent time washing the DA n got it dirty right away drivin in the dirt lol jk
Pretty much lol
Needs a paint job
You know it’s almost like this video isn’t 3 years old. ALOT has changed on this car since then