I got mt 125 2016 but I have 4 pin I have no engine light but unsure why my idle unstable. Do you have link for 4 pin to go with this obd reader thanks
I have a 2018 yamaha mt 125 abs I turned it on the other day and engine warning light came on there was no error codes no flashing light nothing just the warning light . The bike runs fine no problems at all I took it to 2 different garages and when they plugged the diagnostic machine in it wouldn't allow them access to ecu to turn warning light off I'm puzzled
Hi, i am a bit stuck with my MT 125. The flashers have no life at all. The fuse box is useless and almost 90% fuses corresponds to ABS system and all good. I have tried a different Speedo, ECU but still no luck. I am a bit confised is there a hidden ecu, controller inside somewhere? The key system uses 2 lives and 2 variable voltage connectors both Lives and Variables need to be connected to start the bike. Do you have any idea. I just ordered a wiring harness to i can backtrace the wiring from Indicators knob to relay. Also, for some stupid reason the High beem is always on.
@@2_wheel_adventurer Thanks for the reply i solved the issue it has nothing to do with any ecu or major electronics. Just broken wires. Many Thanks again
the four pinnace meant for the abs wow I didn't know that it actually works to clear codes and to find out problems you could even go on the page for the RPM of the engine and everything like that not too sure why the 4-pin works so well for me then that's a bit of a weird one
Thank you, I was able to see and correct a bug thanks to watching your video and knowing which cable to buy.
Thank you, glad I could help
I got mt 125 2016 but I have 4 pin I have no engine light but unsure why my idle unstable. Do you have link for 4 pin to go with this obd reader thanks
I have a 2018 yamaha mt 125 abs I turned it on the other day and engine warning light came on there was no error codes no flashing light nothing just the warning light . The bike runs fine no problems at all I took it to 2 different garages and when they plugged the diagnostic machine in it wouldn't allow them access to ecu to turn warning light off I'm puzzled
maybe check your fuses
Could you please provide the link to buy the device and the cable
in description
don't let the battery get low on the mt-125, it will eventually kill your lcd display!
I did not know that thank you very much
Can confirm that this works in a 2020 yamaha mt 125
What type of adaptor do you have?
6 pin?
Hi, i am a bit stuck with my MT 125. The flashers have no life at all. The fuse box is useless and almost 90% fuses corresponds to ABS system and all good. I have tried a different Speedo, ECU but still no luck. I am a bit confised is there a hidden ecu, controller inside somewhere? The key system uses 2 lives and 2 variable voltage connectors both Lives and Variables need to be connected to start the bike.
Do you have any idea. I just ordered a wiring harness to i can backtrace the wiring from Indicators knob to relay. Also, for some stupid reason the High beem is always on.
sounds like a much bigger issue I'm guessing you've tried to replace in the actual high and low beam and indicator button
@@2_wheel_adventurer Thanks for the reply i solved the issue it has nothing to do with any ecu or major electronics. Just broken wires.
Many Thanks again
How did you get the black widow exhaust to be so quiet?
I put a additional DB killer in the exhaust as the exhaust slips on it was one of the honeycombed ones made it sound a lot nicer
I recently installed one but it took away the popping so I took it out 🤣
@@delta-sm9jn fair enough bro if you leave it in it will burn up a little bit and you’re popping and banging should come back
Can you tell me where to buy this please.
Links are down in the description
I'm afraid to buy the wrong Leeds which is the best one to buy
I've got some Leeds in my description of this video they worked for me
I don't think Leeds is for sale.
I just ordered it, I hope it will work with mine R125 2017 ABS. Thanks for video and links 👍👍
did it work
Did it work for you ?
it worked btw
how to adjust idle?
@@nectx5948 not too sure don’t own this Motorbike anymore but should definitely be a video out there somewhere or look in a Haynes manual
The 4 pin should be for the abs.
the four pinnace meant for the abs wow I didn't know that it actually works to clear codes and to find out problems you could even go on the page for the RPM of the engine and everything like that not too sure why the 4-pin works so well for me then that's a bit of a weird one
Do you mean the ABS models? Or just ABS itself
There is no 3 pin connector on my bike
that's a bit weird sounds like you need to go to your dealership then
Helpful 👍