FIXING My 2016 Chrysler 200 No Start - [Changing My Electronic Throttle Body]
Вставка
- Опубліковано 4 сер 2020
- Today I'm showing you a common issue with these mopar 4 cylinder and 6 cylinder engines with the electronic throttle body. These have the Throttle Position Sensors built into the throttle bodies and when the throttle position sensor goes out, so does the car engine. It struggles to turn on and sometimes, just doesn't.
Sorry about not having background noise in this video, the wind was strong as well as there was construction going on in the background, so it was just best to take out all sound minus the voice over.
Here are the affiliate links to the items used in the video:
New Throttle Body - amzn.to/3oYAcFE
Flex Head Ratchet - amzn.to/3kaU1Xz
Flexhead Ratcheting Wrench - amzn.to/3iiIAeJ
Note: Anything purchased through the links help support my channel.
Hello everybody, my name is Ulrich with UFixItAuto and I have a channel on automotive repair and I am going to be showing you how to do repairs using my cars. I am not a professional mechanic, but I have an extensive background on working on cars. Please, if you wanna see this channel grow, then make sure you like, subscribe and share. I will be investing everything that I make from these videos back into the channel to give you guys more quality content, but the amount of videos and how frequent depends on you guys and how much you guys are willing to support my channel! Please leave comments as to what you would love to see done and how I can improve my channel!
About Me:
What cars do I have that I will be making content with?
I have a 1967 Mustang Coupe, 1967 Impala 4 Door, 1998 Toyota Celica GT Convertible, 2000 GMC Sierra 1500 SLE, 2016 Chrysler 200, 2018 Toyota Camry and a 1996 Honda Civic
What things do I love to do on cars?
I have a love for all cars and love to see them all running smoothly, but on top of all that, I have a love for car audio, so you will be seeing a lot of car audio builds.
Follow me on:
Instagram: @ufixitauto
Twitter: @UFixItAuto1 - Авто та транспорт
Will it be the same fixture for a 2015? Did it show a sign of the engine overheating? Did you have to relearn the pedal?
You're a life saver! I was about to give up on finding a video to show the disassembly to the throttle body on the 2.4l model thanks so so much for your efforts and skill will be a lifetime follower !!
were you able to get the black bar off?
This man is a life saver
Good ass vid..straight to the point easy to follow
Thank you for the video 👍🏼
yu have now clue how this video just save me $450.00! the total estimate for the dealership to do it was 667.00. also thank you for telling your listeners what sockets and torque but you used
I'm happy I was able to help! It makes me happy knowing it was a helpful video! 🍻
You are a pure beast bro pure beast
Hey just did a throttle body clean. Removed and cleaned put back and omg my car starts perfect now and no drop in idle when coming to a stop thank you so much!! Thanks God for that flex head wrench advise 🙏 .
What did you use to clean it
@@luisamateofrancisco7313 CRC Throttle body cleaner. You can find it at most auto parts stores.
Thanks man good video!!!
Great video
Great vid
Do you need the angle bracket ?
Can you send a picture of the flex head wrench
Could the throttle body possibly cause the car to crank but not start very well? Will start if put gas pedal to the floor.
Amazing video
Did you had to reset the throttle body cus my is tellme to reset it ? And idea
I just wanna know do we have to do the the throttle relearn process after changing it?
I personally didn't have any issues. It's almost like the car relearned the throttle position sensor. I have heard about car going into limp mode if the car didn't successfully relearn the throttle position sensor and I was fully prepared to go to a dealership to have them plug in their computer and I would have at least saved money on this install 😂 but luckily I didn't have that issue.
Can you make another view service airbag system on chrysler 200 2016. How to unplug under the seat?
My tree style clip broke when I was trying to get it off how do I get it out correctly?
Video was great but do you have to calibrate the throttle body after you put it in ? I got a 2015 crystal 200c the guys was telling me that’s why I have to have a mechanic fix it
I personally didn't have any issues. It's almost like the car relearned the throttle position sensor. I have heard about car going into limp mode if the car didn't successfully relearn the throttle position sensor and I was fully prepared to go to a dealership to have them plug in their computer and I would have at least saved money on this install 😂 but luckily I didn't have that issue.
Awesome okay imma give it a shot thank you so much major life saver
will this always produce a engine light?? i dont have the light yet but i have the engine hesitation already and i just replaced my gas sensor and new spark plugs
I will say most of the time yes. There could be so many things in these modern engines that cause engine hesitation that its hard to pinpoint the issue. If you have an automotive scanner, I would plug it in and make sure all the major sensors are operating the way they should. If not, then it's time to start cleaning some components before replacing them I would say. But that's all my opinion!
I’m not sure if it’s my pedal sensor or this throttle body that’s giving me problems
I just tried to replace mine. I couldn’t get the last bolt out on the bottom. I got a 13mm flex and I still couldn’t get it to come off. Wish I knew how you angled yours in to get it off.
Exactly the same problem I’m having and no one has any solutions and if they do they’re not sharing them
Take off the windshield cowl that should give you enough room to get you a better angle. A little more work but gotta get it fixed.
Hey Man, So my Chrysler 200 2015 has a low oil pressure pop out some times then also the etc right after and I have to pull over and restart it goes away for the day or sometimes a couple hours or sometimes a couple days. What does this mean? Should I change my throttle
Would really appreciate a reply thank you!
Low oil pressure is usually caused by low oil in the engine, dirty oil filter, dirty oil, bad oil pump or a bad oil pressure sending unit. Typically those are the things you look at haha. No Way to know for sure unless you go diagnosing! Good luck!
Please advise : job is IMPOSSIBLE without 13 mm flex head ratcheting wrench. Just tried with a normal wrench.
Def not impossible Done mine with a normal ratchet wrench just didn’t have as much leverage so that’s why I used ratchet wrench .
What size is the bolt that holds the angle bracket on the throttle body. I dropped it when I pulled it out
13mm
Do you recommend replacing the gasket?
Gaskets are so cheap that I always recommend replacing them IF you get OEM or quality like Fel Pro. It's just a preventative maintenance item like O rings and crush washers. I will always recommend replacing them.
Question, I have this car. Mine will crank for a few times and it will turn off. I have to try a few times with my foot on the gas pedal then it will go on. Is this the reason why I'm having this issue?? Please reply thank you
That's tough, it could be a lot of things. Could be not getting enough fuel, enough air, could be electrical or it could be a weak battery. I would say the number 1 issue I had with this car was the battery. When it starts getting old and weak, a lot of things went wrong and I fixed it with a new battery, but obviously without properly diagnosing, I won't be able to pinpoint your issue haha.
What was the symptoms with yours? Mine it is hard to crank but eventually does with Service Throttle body alert. Next time I went to start it will not even turn over just attempt.
If I remember correctly, mine was that even with a new battery, it was still cranking and not starting. I recommend getting a good battery tester to test the battery because a bad battery can also cause the same issue before swapping out the tps. I have a friend that had the same issue on a Dodge Dart and even though the Auto zone battery tester said the battery was good, a better battery tester determined it was bad and it fixed their issue.
@@ufixitauto5237 Thanks. Mine was not even cranking after the first failed attempt. A new AGM Battery fixed the issue. When these batteries go they throw weird errors with these Chryslers so that is what fooled me a bit.
Wow! This was so helpful! I have this exact same issue on my car. Now i can fix it no problem 😁 thanks for the video!
Doubt.
Did you replace the gasket? And what about the relearn?
Great questions! :) I reused the old gasket, the new one supplied did not fit quite right. I called my local Mopar dealership and they said these don't require relearn. Those are primarily on the GM crankshaft position sensors. Don't know how true that is, but I have not had an issue since! Its being daily driven and hasn't acted up since. But of course if you experience overrevving or want to take the precautions to do a relearn, then by all means do it! Scanner is the easiest method if you take it in to a shop if you don't have one or if you want take the steps to do the relearn without a scanner, you just turn off all car accessories and cruise at 55 for 5 min, then decelerate to 45 min for a min and then go through the usual 4 deceleration cycles :) cheers! 🍻
@@ufixitauto5237 Thanks, I changed it out yesterday and so far so good. That bolt on the bottom of the bracket whooped my arse!
@@jslo638 its honestly the worst part! But I'm happy you got it!
I have a 2015 Chrysler 200, it has no power at all and every time we try jumping it the car horn goes off. Any thoughts? (It was working before I traveled for Thanksgiving)
Sounds like a bad battery. Car horn going off is normal when jumping a car. Its part of the security.
Bro what hose was that you put on last
Do you mean the hose that goes on the air intake hose?
Andbody know the size of the bolt on the bracket? I dropped it
Hey could you give me some advise on the car
Depends on the advice!
@@ufixitauto5237 I have a Chrysler 200 I have had in multiple shops and was told I needed a new engine then I needed a wiring harness then I needed something else. Here the thing I do have a recall on in for the pcm but dealer ship refused to put on because the car is able to start not sure what I should do. There isn’t anything else a mechanic says is wrong with it
How long did it take you to remove that black bar?
Surprisingly not too long. A few minutes
@@ufixitauto5237 Can you tell me which tool you used?
Katy: babe my car is broken again, can you take a look at it please Ufixitauto: hold my panel clip pliers
😂😂 I mean, pretty much how it went
So if I don’t replace this myself... how much would it cost to take it to a shop?
Good question haha. I think someone commented that he was quoted a labor charge of 450 along with the part. Hourly prices vary per mechanic and experience the mechanic has for that specific job determines how much time they take to do that job.
Can you list the tools used during operation?
It's linked in the description:)
@@ufixitauto5237 thank you.
Hello did this part fix the issue or did it later fail
It fixed my issue! The car recently exhibited similar issues, but after swapping out the battery, it fixed it again haha
How in the hell did you put the bracket back on...dang
Carefully 😅
What If the car is cranking but not catching? Still a throttle body?
Could be no gas or spark or an electrical issue. You'll have to diagnose it further
@@ufixitauto5237 I have gas, tried to jump it. The battery is good, there's no codes. The dash says "remote start disabled, system fail". I thought my anti theft locked or something. Weird
@@nanii5427 well is gas making its way to the engine? Do you have spark?
It doesn't. I have the check engine light on and the red lightning bolt. If I try to start it, it seems like its gonna turn un but then it just turns off
Not a t25 btw
What if i just clean it ??
You can try 🤷♂️
I tried cleaning mine and it didn't work. So I ordered one, putting it on in a few..
@@twonfu757 you did it yourself? If so how’d you get that bolt?
That black tip broke on me due to aging ig
Ooh, sorry to hear that!
The set of wrenches cost more than the part 🤦🏾
I can't get that bottom bolt back on to save my life. Pissing me off
I'm not gonna lie, that bolt sucks
My car cranks but don't star ,now it does sometimes but sometimes it doest and when it starts it works normal but then again some times is just won't star. I have change fuel pump , I jectors and also I m getting codes 02 sensors all 4 but nothing about the mass airflow
Have you tried swapping the battery? I spoke to the dealership when sending it in for a recall and they said that these cars are so sensitive to a bad battery that they get trade ins all the time where the customer thinks there's something wrong with the car but the issue was as simple as the battery. If you haven't yet, try that. If you have tried that, what kind of symptoms does it show when it doesn't start? Also, if you're getting codes for the o2 sensors, have you tried new o2 sensors?