chrysler 200 electronic throttle body issue and replacement ETC
Вставка
- Опубліковано 6 жов 2020
- 2013 chrysler 200 throttle body replacement
This video is to help you through the process of changing or replacing your elect Tronic throttlebody most newer cars have an electron a throttlebody this applies to the avenger I believe Chrysler 300s etc. you just need to find out where the electronica throttlebody is located underneath the hood. Now if you’re driving down the street one day in your Chrysler 200 and all of a sudden your car loses power you can accelerate and you have a lightning bolt a.k.a. the electronica throttle body symbol on your dash along with your stability track light and maybe your check engine light comes on it could be one it could be two or it could be all 39 times out of 10 your problem is that your electronica throttle body has a short in it you have to replace it if it happens to you turn your car off turn it back on immediately Pull over and do that. Now if your car continues to run after this you don’t have much time to get it fixed you may think oh it went away but it did not it will happen somewhere down the line within a month or two if you’re lucky to afford to take that long and this video is the solution to that thank you if I help you leave a comment subscribe to my channel I will be having more content on here very soon thank you be safe!
IF YOUR 200 IS NOW OVERHEATING HERE GO THE VIDEO FOR THAT ISSUE AS WELL CAUSE THE INFO IS SLIM ON UA-cam AND THIS IS FROM US FOR US 💯 ua-cam.com/users/shortsJmbRomlS5to?feature=share
My chrysler 200 2013 is not going above 60 mph can you please tell me what the problem is
Thank God I found someone working on the same car I have !! So glad I found this video. The symptoms come and go. The Limp mode mentioned in the video is what throws people off because of all of the "it could be this" (sensors) that cause the car to go into Limp mode. Pay attention to this video he knows what he's talking about it being the Throttle body. 👍💯
Yes me too this will help
That what I’m saying
I have a 2013 200 same light.. do you have to reset electronic
That sounds you were hearing in your video... That clicking sound that you said you haven't figured out what it is yet. It may be the "actuator" its what controls your air flow vents. There are either 2 or 3 of them. I have a 2014 Chrysler 200 and it did the same thing. I went to the junk yard and got one for a couple bucks. Not a difficult task (so long as one has patience). I am not that one. Ha. Maybe that info might help anyone with that clicking sound coming from the dash. God bless.
Thanks your video gave me the confidence to fix my car. It runs Great
Thank you! I just started having this problem! Great video for it man!
Thanks man great video. I just got the symptoms on my Chrysler 200. Never had a Chrysler so this video was awesome.
Thanks for the video. Actual work time 40 mins including moving air duct reassembly and replacing air filter.
Thank you 🥺 I was having the same problem you’re a lifesaver
Yw bbg unfortunately these 200s are shit so um beware hopefully your lucks better than mines cuz more issues is coming(knock on wood)😂 my shit just went down a-mf-gain
@@369Wapo_Reacts2 Feel your pain man. My electronic throttle control is on, check engine light is on. I've taken it in to my mechanic and he said he couldn't find anything wrong with it. I was happy with that but then both lights starting going on again, now periodically the traction control. It's maddening.
@@369Wapo_Reacts2 was you getting random stalling. That's what mines been doing. And did you calibrate the new one there's a video on here how to calibrate it.
You have to turn the key to on position wait for lightning bolt to go away, then slowly press the gas pedal then slowly release but turn it off then start it right afterwards then it's calibrated
Thank you I just got home to this problem.
Boy u did that .
You helped me out a lot.
I have that same problem
If you still have this car, that noise is actually the blend door actuator, probably on the passenger side. It is part of a recall, so the dealership will change it for free. I just took mine out because it was running down the battery by ticking at random times with the car off. After i got it out, i saw that it had cheap plastic gears and posts inside and the main gear post had broken off, so the car just kept trying to make it spin. The only negative to taking it out completely is that it doesn't switch between cool and hot on the ac without you manually turning on the air conditioner.
Great video what if a relearn process wasn't done after
Thanks for the video, just what I needed!
Good looking out bro that is my problem
Mine just started acting up, but i fueled up at bee pee, instead of wa wa, so thinking it was bad gas. Light came on ,went off ,came back on a couple different times but immediately went off. Been running kind of rough since
I know this has been a while ago but did anyone have a problem with the car idling high after replacing the throttle body?
Bro THANK U
💯
In your next vid inclued a link of where you got your part... Thanks for your help
Hey buddie,👍👍
Good-looking on the tips. I know it has nothing to do with nothing but I'm pretty sure this man is from either Long Beach or the Bay Area. LOL
My 2012 charger has the same issue the bolt light come on temperature gauge goes down to cold I replaced the throttle body the thermostat and the light still came back on doing same thing I have not been able to find anything else on how to fix it
That noise is a blend door actuator. There are 3 in the car.
I just swapped mine out and it keeps tripping. Have you had this issue as well?
Same problem with my 200 waiting for my new throttle to install i have a question bruh any particular reason why this is happen it’s so sudden it’s just about week they just cleaned my car because of the water stuck in dreainage of my car sunroof.. after they cleaned it the next day the lightning bolt and traction control appear in my dashboard
What symptoms was your car having. My 2015 Chrysler 200 struggles to turn on and goes into limp mode. Traction light turns on and won't accelerate past 32mph
Most likely your throttle body needs to be replaced or cleaned like this. Unplug your battery or at least disconnect the bolt off the negative terminal for a couple of hours and see if it’s still acts like that and try to get the codes from a auto parts store
Hey bro How about making a video to replace engine air filter tnx c200👍🏻👍🏻🙏🏻
I replaced my electric throttle body already but still the lightning bolt and traction control sign showed in the dashboard
Bro i hope u respond I'm legit in toledo an im having wild issue if I could get some advice
Does the new throttle body have like a little ball moving around in it ?
I don’t recall but I don’t believe so
Thank you very much bro. I have a Chrysler 200?and the flashing lighting bolt sign came on and the car stalled. I am going to change my throttle body and let you know the results
Did it fix the problem
did it fix the problem?
@@panthers559 Howdy Danny, I changed my throttle body and my car now works perfectly. I got the part online and replaced it myself, took me about an hour. cheers
@@akram3067 really appreciate the response Akram will be doing soon thanks a bunch.
@@akram3067 . No I gave it to a mechanic and he’s working on it , he said that he’s going to also change the oxygen sensor
Where did you order from? Everywhere I call to price is $200 plus
Amazon $60
Walmart app too $54
Amazon $60 - $100+
I order in amazon
Where did you buy the part from?
Autozone
How much should I expect to pay for this particular service?
I was told between 100-300 not including the part the part alone is like 250
How much a throttle body for a 2013 for a Chrysler 200 it's a 2.4
How much was it cost for a new throttle body one?
Like 250 at autozone
About 65 on line 150-250 in store
can u fix mines please
Having this issue now. Definitely gotta get it replaced smh
That clicking is your blend door that's inside of your glove department easy fix
upload some more vids homie
Appreciate this 👌🏼 just got my new throttle body.
I had that same clicking sound on my 200.
I believe it was the fan actuator. Or hvac actuator.
Idk the exact name for it
There’s 4 actuators total. One of them could have a gear broken or just be going out.
Thanks for the video
7:08 mine makes that same noise randomly!!!
How much would it cost for me to take it to someone without them trying to take advantage of me? 😩😩🤦🏾♀️😏
Nigga told me labor 700 today 😂
Thank you! Live saver!💯🫡